SSRS's Mail subscription file format as XLSB

Dear All,
I have a SSRS report, which execute hourly basis and send data in excel as an email attachment. I would like to attacheded excel file in .XLSB format. Please help.
Virendra Yaduvanshi http://wikidba.wordpress.com/

Hi Virendra,
According to your description, there is a report you configured subscription, it executes hourly and send data as an email attachment as excel. You want to render the report into excel with .xlsb format.
In Reporting Services, the Excel rendering extension can render the .rdl file into Excel with .xls or .xlsx (SQL Server 2012). Currently it not support to render report as .xlsb.
Personally, I recommend you that submit the wish at
https://connect.microsoft.com/SQLServer/. If the requirement mentioned by customers for many times, the product team may consider to add this feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the
level of service provided
If you have any more questions, please feel free to ask.
Regards,
Wendy Fu

Similar Messages

  • Mail cannot open in the file format presented

    every so often, I get an error message in Mail on my iPad telling me, that it can’t open the message in the file format sent. ‘Ask sender to re-send in a different format.’ On the other hand, the same message will open perfectly in Mail on my MacBook.
    Why is that?
    Note: this is just a regular message, NOT any kind of attachment.
    Thanks,
    Klaus

    It's possible that the email was sent in some sort of "fancy formatting" rather than plain text. iPad probably reads plain text email messages a lot better than formatted ones (with different fonts, etc. that may not be recognized by iPad).

  • How to send a mail in pdf format file in sbwp??

    how to send a mail in pdf format file in sbwp?? and how to read the content of the mail?

    Refer the following link for Sample Program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm

  • When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files.  Even if I perform a "save as" to the correct file name the file format is still not recognized.  Why is this happening!?

    When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files.  Even if I perform a "save as" to the correct file name the file format is still not recognized.  Why is this happening!?

    http://www.joshjacob.com/mac-development/tnef.php

  • I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3.  I haven't come across Preview or this problem before.  Any suggestions?

    I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address.  Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format.  I haven't seen Preview, or had any problems, before now.  Thanks for any suggestions.

    Hi,
    Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
    For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
    The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
    If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
    It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • I can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

    i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • Hi, My atachments /any file format/ turns into .dat when I mail them into my own iPad2. What to do??

    Hi
    When I email an attachment /any file format/ from my PC to my iPad2 the attached file turns into a .dat file
    What to do?
    Regards

    An Alias would be an email address that is delivered to a different account's inbox.
    For instance if you have  [email protected] and have [email protected] Then [email protected] would be an alias if mails from that address arrive at the icloud address.
    If you want to add a completely different account, with a spearate inbox, like an account in hotmail and one in say yahoo mail. Then as has been pointed out, you need to go into the  Settings Icon, Tap on Mail, Contacts, Calendars, and then on add account. The iPad has several services preconfigured, you can tap on one of those from the list to setup an email for that service. Such as Hotmail, Gmail etc...
    Or you can tap on other to add a personal pop3 or imap type email like from your office, or your school.

  • SSRS report Excel Export file size is huge

    Hello everyone,
    I am facing an issue with SSRS report exporting  to Excel.
    Issue : Exported file size is too big.
    I have a matrix report ( parametrized report ) it fetches data from multiple table.
    initially when
    1) I select all parameters all values
    2) load the report after that
    3) exporting to excel
    so exported file size was about 10 Mb to 12MB
    Now, suddenly from this month exported file size is too big around 62 MB for same data,
    I checked on different forums and tried the solutions but it didn't worked,
    can anyone please suggest me on this.
    My environment is
    Visual studio (BIDS) 2008
    SQL Server 2008 R2
    Excel 2007
    Thanks

    Hi UdayKGR,
    According to your description, when you export a report into an excel file, the exported file size is too huge. Now you want to reduce the file size. Right?
    In this scenario, do you export the report into excel 2003 file? When reports are first exported and saved to Excel 2003, they do not benefit from the file optimization that Excel automatically applies to its *.xls workbook files. The larger file size can
    cause problems for e-mail subscriptions and attachments. To reduce the size of the *.xls files for exported reports, open the *.xls files and then resave the workbooks. Resaving the workbooks typically reduces their file sizes by 40 to 50 percent. Also please
    try to install the Reporting Services 2008 R2 Service Pack 2 and reduce the merged columns in exported excel file. For more information, please see the links below:
    Exporting to Microsoft Excel (Report Builder and SSRS)
    problem
    regarding the size of exported report from reporting services to excel format
    SSRS Export to Excel - Performance
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Changing the file format of spool output when scheduling a background job.

    Hello Experts,
    I have an issue. It is related to Spool output format. I created a job for one report program for which the output is a list output. I have added one recipient in the 'Spool list recipient' while creating the job SM36. After the job is finished the spool output is sent to the recipient mail id as .htm format as an attachment. But the attachment should be excel sheet or text file. No coding in the program should be used to convert the file format. Only settings in the spool while creating job should be manipulated. Please help me in solving this issue.
    Regards.

    Hi Sunil,
    You can use the logic for converting spool to PDF using program : RSTXPDFT4 . Alternatively you can use FM: CONVERT_ABAPSPOOLJOB_2_PDF . In this FM you need to pass the Spool id .
    u can make use of these FM's SO_DOCUMENT_SEND_API1
    SO_NEW_DOCUMENT_SEND_API1
    Check out the following wiki:
    https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertsspoolrequestintoPDFdocumentand+emails
    hope this will use full to you.
    Thanks!!

  • How to send program output as  mail in HTML format

    Hi Friends,
    I have a BDc which runs in background and its been Stored in my system and displayed as HTML format.
    My requirement is now i want that Same HTML file which i am displaying to be sent as a mail in HTML format itself..Kindly help me on this
    Thanks in advance
    kishore

    Hi,
    Below sample program might give you idea on sending HTML attachment.
    TYPES: BEGIN OF t_sal_ord,
               vbeln TYPE vbeln_va,
               posnr TYPE posnr_va,
               auart TYPE auart,
               vkorg TYPE vkorg,
               matnr TYPE matnr,
             END OF t_sal_ord.
      DATA: i_sal_ord TYPE STANDARD TABLE OF t_sal_ord,
            i_header TYPE STANDARD TABLE OF w3head,
            i_fields TYPE STANDARD TABLE OF w3fields,
            i_html TYPE STANDARD TABLE OF w3html,
            wa_header TYPE w3head.
      DATA: i_fcat TYPE lvc_t_fcat,
            wa_fcat TYPE lvc_s_fcat.
      DATA: g_send_request TYPE REF TO cl_bcs,
            g_document TYPE REF TO cl_document_bcs,
            g_recipient TYPE REF TO cl_cam_address_bcs,
            g_cx_bcs TYPE REF TO cx_bcs,
            g_sent_to_all TYPE os_boolean.
      DATA: g_lines TYPE i,
            g_size TYPE so_obj_len.
      PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY,
                  p_mailad TYPE ad_smtpadr OBLIGATORY.
    START-OF-SELECTION.
      SELECT a~vbeln b~posnr a~auart a~vkorg b~matnr
        INTO TABLE i_sal_ord
        UP TO 20 ROWS
        FROM vbak AS a
        INNER JOIN vbap AS b
        ON a~vbeln  = b~vbeln
        WHERE a~vkorg = p_vkorg.
      wa_fcat-coltext = 'SalesOrd#'.
      APPEND wa_fcat TO i_fcat.
      wa_fcat-coltext = 'Item#'.
      APPEND wa_fcat TO i_fcat.
      wa_fcat-coltext = 'OrdType'.
      APPEND wa_fcat TO i_fcat.
      wa_fcat-coltext = 'Sales.Org'.
      APPEND wa_fcat TO i_fcat.
      wa_fcat-coltext = 'Material'.
      APPEND wa_fcat TO i_fcat.
      LOOP AT i_fcat INTO wa_fcat.
        wa_header-text = wa_fcat-coltext.
        CALL FUNCTION 'WWW_ITAB_TO_HTML_HEADERS'
          EXPORTING
            field_nr = sy-tabix
            text     = wa_header-text
            size     = '2'
            fgcolor  = 'BLACK'
            bgcolor  = 'VIOLET'
            font     = 'CALIBRI'
          TABLES
            header   = i_header.
        CALL FUNCTION 'WWW_ITAB_TO_HTML_LAYOUT'
          EXPORTING
            field_nr = sy-tabix
            size     = '2'
            fgcolor  = 'BLACK'
            bgcolor  = 'WHITE'
            font     = 'CALIBRI'
          TABLES
            fields   = i_fields.
      ENDLOOP.
      wa_header-text = 'Sales Order Details'.
      wa_header-size = '2'.
      wa_header-font = 'CALIBRI'.
      CALL FUNCTION 'WWW_ITAB_TO_HTML'
       EXPORTING
    *     TABLE_ATTRIBUTES       = 'BORDER=1'
         table_header           = wa_header
    *     ALL_FIELDS             = 'X'
        TABLES
          html                   = i_html
          fields                 = i_fields
          row_header             = i_header
          itable                 = i_sal_ord.
      TRY .
          g_send_request = cl_bcs=>create_persistent( ).
          g_document = cl_document_bcs=>create_document(
                        i_type  = 'RAW'
    *                i_text  = i_content[]  " Body for Mail
                        i_subject = 'Sales Order Details' ).
          DESCRIBE TABLE i_html LINES g_lines.
          g_size = g_lines * 2 * 255.
          CALL METHOD g_document->add_attachment
            EXPORTING
              i_attachment_type    = 'HTM'
              i_attachment_subject = 'Sales Order Details'
              i_attachment_size    = g_size
              i_att_content_text   = i_html[].
          g_send_request->set_document( g_document ).
    g_recipient = cl_cam_address_bcs=>create_internet_address( p_mailad ).
          g_send_request->add_recipient(
             EXPORTING
               i_recipient = g_recipient
               i_express = 'X' ).
          g_send_request->set_send_immediately( 'X' ).
          g_send_request->send(
              EXPORTING
                i_with_error_screen = 'X'
              RECEIVING
                result = g_sent_to_all ).
          COMMIT WORK.
        CATCH cx_bcs INTO g_cx_bcs.
          WRITE:/ g_cx_bcs->error_type.
      ENDTRY.
    Kind Regards
    Eswar

  • How to configure a standard SmartForm to be sent by e-mail in PDF format

    How to configure a standard SmartForm to be sent by e-mail in PDF format
    We need to use standard SAP configuration to send e-mails (output type Medium = 5 External Send).
    Currently we were able to send the forms on OTF format, not PDF.
    Does anyone know how to automatically make the conversion from OTC to PDF without having to code anything on ABAP?

    Hello Luiz,
    actually there are only a few steps to do:
    Just call transaction SCOT and doubleclick your SMTP node. Click on the "set"-Button behind the supported address type "internet". Choose "PDF" as output format for SAPforms.
    By the way. You can also generate a PDF-File from a Spool with report RSTXPDFT4.
    I hope this will help you.
    Bye
    Frank

  • Sending ALV output in a mail in PDF format

    Hi folks,
                I have a requiremtnt. If i execute my ALV report in background, the output should be sent to the reciepient's mail in pdf format. i have used the function moudles CONVERT_ABAPSPOOLJOB_2_PDF and SO_DOCUMENT_SEND_API1. Now i am able to see my report output in spool in some pdf formt. how can i send this to the reciever mail as an attachement...pls send me any sample report which suits my reqirement...thanks in advance,
               Ram.

    REPORT ZSAP_EMAIL MESSAGE-ID Z001.
    *TABLES: rlgrap, btcxpm." zlookup.
    DATA:
    V_ZCODE(3) TYPE C,
    *svrname LIKE zlookup-zdesc,
    WA_ERROR(80) TYPE C,
    GLOBAL_FILEMASK_ALL(80).
    DATA: T_SOUD LIKE SOUD.
    DATA: P_INFOLDER LIKE SOFDK.
    DATA: P_OUTFOLDER LIKE SOFDK.
    DATA: OBJECT_HD_DISPLAY LIKE SOOD2.
    DATA: OBJECT_ID LIKE SOODK.
    DATA: DOCUMENT LIKE SOOD4.
    DATA: HEADER_DATA LIKE SOOD2.
    DATA: LINK_FOLDER_ID LIKE SOODK.
    DATA: FOLDER_SELECTIONS LIKE SOFDS.
    DATA: FOLDER_LIST LIKE SOXLI OCCURS 0 WITH HEADER LINE.
    DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
    DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
    DATA: OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE.
    DATA: OBJECT_CONTENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
    DATA: OBJECT_HD_CHANGE LIKE SOOD1.
    DATA: BEGIN OF FILES OCCURS 0,
    LINE(200) TYPE C,
    END OF FILES.
    DATA: LISTOBJECT LIKE ABAPLIST OCCURS 1 WITH HEADER LINE.
    *Email to addresses
    SELECTION-SCREEN: BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
    PARAMETERS: P_MAILTO(240) TYPE C.
    *PARAMETERS:P_MAILTO TYPE SOLI-LINE.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN COMMENT 10(2) TEXT-001.
    *Use zlookup-ztype as group to define multiple email to addresses
    *SELECT-OPTIONS: s_mailto FOR zlookup-ztype.
    SELECTION-SCREEN: END OF BLOCK BL1.
    *Subject
    SELECTION-SCREEN: BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-BL2.
    PARAMETERS: P_SUBJ LIKE DOCUMENT-OBJDES.
    SELECTION-SCREEN: END OF BLOCK BL2.
    *Body
    SELECTION-SCREEN: BEGIN OF BLOCK BL3 WITH FRAME TITLE TEXT-BL3.
    PARAMETERS: P_BODY1 LIKE SOLISTI1-LINE LOWER CASE.
    PARAMETERS: P_BODY2 LIKE SOLISTI1-LINE LOWER CASE.
    PARAMETERS: P_BODY3 LIKE SOLISTI1-LINE LOWER CASE.
    PARAMETERS: P_BODY4 LIKE SOLISTI1-LINE LOWER CASE.
    PARAMETERS: P_BODY5 LIKE SOLISTI1-LINE LOWER CASE.
    PARAMETERS: P_BODY6 LIKE SOLISTI1-LINE LOWER CASE.
    SELECTION-SCREEN: END OF BLOCK BL3.
    *Attachments
    SELECTION-SCREEN: BEGIN OF BLOCK BL4 WITH FRAME TITLE TEXT-BL4.
    PARAMETERS: P_FNAME1 LIKE FILES-LINE.
    PARAMETERS: P_FNAME2 LIKE FILES-LINE.
    PARAMETERS: P_FNAME3 LIKE FILES-LINE.
    PARAMETERS: P_FNAME4 LIKE FILES-LINE.
    PARAMETERS: P_FNAME5 LIKE FILES-LINE.
    PARAMETERS: P_FNAME6 LIKE FILES-LINE.
    SELECTION-SCREEN: END OF BLOCK BL4.
    AT SELECTION-SCREEN.
      PERFORM CHK_SELECTION.
      IF NOT WA_ERROR IS INITIAL.
        MESSAGE E001 WITH WA_ERROR.
      ENDIF.
    START-OF-SELECTION.
    END-OF-SELECTION.
      PERFORM SEND_EMAIL.
    FORM chk_selection
    FORM CHK_SELECTION.
      CLEAR WA_ERROR.
    *Loop only once ???
    *If more checkings to be done.
    *Think about it and if not clear.
    *Let it sink in for a couple of minutes.
    *Still doesn't make sence? Go home and sleep on it.
      DO 1 TIMES.
    *Check Email to
        IF P_MAILTO IS INITIAL .
    *AND s_mailto IS INITIAL.
          WA_ERROR = 'Invalid or no EMAIL TO selection'.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.                    "chk_selection
    *& Form send_email
    *text
    *--> p1 text
    *<-- p2 text
    FORM SEND_EMAIL.
      PERFORM GET_FOLDER_INFO.
      PERFORM FILL_BODY.
      PERFORM INS_NEW_OBJECT.
      PERFORM CRT_ATTACHMENTS.
      PERFORM FILL_RECEIVERS_INFO.
      PERFORM SND_EMAIL.
    ENDFORM. " send_email
    *--+--
    *FORM Get_folder_info
    FORM GET_FOLDER_INFO.
      CLEAR T_SOUD.
    *Small so should be quick.
      SELECT * FROM SOUD
      INTO T_SOUD
      WHERE SAPNAM = SY-UNAME.
        P_INFOLDER-FOLTP = 'FOL'.
        P_INFOLDER-FOLYR = T_SOUD-INBYR. "inbox
        P_INFOLDER-FOLNO = T_SOUD-INBNO.
        P_OUTFOLDER-FOLTP = 'FOL'.
        P_OUTFOLDER-FOLYR = T_SOUD-OUTYR. "outbox
        P_OUTFOLDER-FOLNO = T_SOUD-OUTNO.
      ENDSELECT.
    ENDFORM.                    "get_folder_info
    *FORM fill_body *
    FORM FILL_BODY.
      OBJECT_CONTENT-LINE = P_BODY1.
      APPEND OBJECT_CONTENT.
      OBJECT_CONTENT-LINE = P_BODY2.
      APPEND OBJECT_CONTENT.
      OBJECT_CONTENT-LINE = P_BODY3.
      APPEND OBJECT_CONTENT.
      OBJECT_CONTENT-LINE = P_BODY4.
      APPEND OBJECT_CONTENT.
      OBJECT_CONTENT-LINE = P_BODY5.
      APPEND OBJECT_CONTENT.
      OBJECT_CONTENT-LINE = P_BODY6.
      APPEND OBJECT_CONTENT.
    ENDFORM.                    "fill_body
    *FORM ins_new_object *
    FORM INS_NEW_OBJECT.
      OBJECT_HD_CHANGE-OBJNAM = 'Notes'.
      OBJECT_HD_CHANGE-OBJDES = P_SUBJ.
      CALL FUNCTION 'SO_OBJECT_INSERT'
        EXPORTING
          FOLDER_ID                  = P_OUTFOLDER
          OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
          OBJECT_TYPE                = 'RAW'
          OWNER                      = SY-UNAME
        IMPORTING
          OBJECT_HD_DISPLAY          = OBJECT_HD_DISPLAY
          OBJECT_ID                  = OBJECT_ID
        TABLES
          OBJCONT                    = OBJECT_CONTENT
          OBJHEAD                    = OBJHEAD
        EXCEPTIONS
          ACTIVE_USER_NOT_EXIST      = 1
          COMMUNICATION_FAILURE      = 2
          COMPONENT_NOT_AVAILABLE    = 3
          DL_NAME_EXIST              = 4
          FOLDER_NOT_EXIST           = 5
          FOLDER_NO_AUTHORIZATION    = 6
          OBJECT_TYPE_NOT_EXIST      = 7
          OPERATION_NO_AUTHORIZATION = 8
          OWNER_NOT_EXIST            = 9
          PARAMETER_ERROR            = 10
          SUBSTITUTE_NOT_ACTIVE      = 11
          SUBSTITUTE_NOT_DEFINED     = 12
          SYSTEM_FAILURE             = 13
          X_ERROR                    = 14
          OTHERS                     = 15.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "ins_new_object
    *FORM crt_attachments *
    *--> P_SUBJ *
    FORM CRT_ATTACHMENTS.
      DOCUMENT-FOLTP = P_OUTFOLDER-FOLTP.
      DOCUMENT-FOLYR = P_OUTFOLDER-FOLYR.
      DOCUMENT-FOLNO = P_OUTFOLDER-FOLNO.
      DOCUMENT-OBJTP = OBJECT_ID-OBJTP.
      DOCUMENT-OBJYR = OBJECT_ID-OBJYR.
      DOCUMENT-OBJNO = OBJECT_ID-OBJNO.
      DOCUMENT-OBJNAM = 'Notes'.
      DOCUMENT-OBJDES = P_SUBJ.
      DOCUMENT-OKCODE = 'CHNG'.
      DOCUMENT-FILE_EXT = 'TXT'.
      LINK_FOLDER_ID = OBJECT_ID.
      HEADER_DATA-OBJLA = 'EN'.
      HEADER_DATA-OBJNAM = DOCUMENT-OBJNAM.
      HEADER_DATA-OBJDES = DOCUMENT-OBJDES.
      HEADER_DATA-OBJPRI = '5'.
      HEADER_DATA-OBJSNS = 'O'.
      HEADER_DATA-FILE_EXT = 'TXT'.
      REFRESH FILES.
      CLEAR FILES.
      IF NOT P_FNAME1 IS INITIAL.
        FILES-LINE = P_FNAME1.
        APPEND FILES.
      ENDIF.
      IF NOT P_FNAME2 IS INITIAL.
        FILES-LINE = P_FNAME2.
        APPEND FILES.
      ENDIF.
      IF NOT P_FNAME3 IS INITIAL.
        FILES-LINE = P_FNAME3.
        APPEND FILES.
      ENDIF.
      IF NOT P_FNAME4 IS INITIAL.
        FILES-LINE = P_FNAME4.
        APPEND FILES.
      ENDIF.
      IF NOT P_FNAME5 IS INITIAL.
        FILES-LINE = P_FNAME5.
        APPEND FILES.
      ENDIF.
      IF NOT P_FNAME6 IS INITIAL.
        FILES-LINE = P_FNAME6.
        APPEND FILES.
      ENDIF.
      IF NOT FILES[] IS INITIAL.
        CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
          EXPORTING
            METHOD      = 'ATTCREATEFROMPC'
          TABLES
            FILES       = FILES
          CHANGING
            DOCUMENT    = DOCUMENT
            HEADER_DATA = HEADER_DATA.
        IF SY-SUBRC = 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
    ENDFORM.                    "crt_attachments
    *FORM fill_receivers_info *
    FORM FILL_RECEIVERS_INFO.
      DATA: BEGIN OF RECLIST OCCURS 0,
      REC LIKE RECEIVERS-RECEXTNAM,
      END OF RECLIST.
    *Build reclist
      REFRESH RECLIST.
      IF NOT P_MAILTO IS INITIAL.
        RECLIST-REC = P_MAILTO.
        APPEND RECLIST.
      ENDIF.
    *IF NOT s_mailto IS INITIAL.
    *SELECT zdesc
    *INTO reclist-rec
    *FROM zlookup
    *WHERE ztype IN s_mailto.
    *APPEND reclist.
    *ENDSELECT.
    *ENDIF.
      REFRESH RECEIVERS.
      LOOP AT RECLIST.
        FOLDER_SELECTIONS-FOLNAM = 'INBOX'.
        CALL FUNCTION 'SO_FOLDER_LIST_READ'
          EXPORTING
            FOLDER_SELECTIONS          = FOLDER_SELECTIONS
            OWNER                      = SY-UNAME
            REGION                     = 'P'
          TABLES
            FOLDER_LIST                = FOLDER_LIST
          EXCEPTIONS
            COMPONENT_NOT_AVAILABLE    = 1
            OPERATION_NO_AUTHORIZATION = 2
            OWNER_NOT_EXIST            = 3
            PARAMETER_ERROR            = 4
            X_ERROR                    = 5
            OTHERS                     = 6.
        IF SY-SUBRC = 0.
          CLEAR RECEIVERS.
          MOVE: SY-DATUM TO RECEIVERS-RCDAT,
      SY-UZEIT TO RECEIVERS-RCTIM,
      ' ' TO RECEIVERS-RECESC,
      P_MAILTO TO RECEIVERS-RECNAM,
      'X' TO RECEIVERS-SNDEX.
          APPEND RECEIVERS.
         RECEIVERS-RCDAT = SY-DATUM.
         RECEIVERS-RCTIM = SY-UZEIT.
         RECEIVERS-RECNAM = RECLIST-REC.
         RECEIVERS-RECNO = FOLDER_LIST-PARNO.
         RECEIVERS-RECTP = FOLDER_LIST-PARTP.
         RECEIVERS-RECYR = FOLDER_LIST-PARYR.
         RECEIVERS-SNDTP = FOLDER_LIST-PARTP.
         RECEIVERS-SNDYR = FOLDER_LIST-PARYR.
         RECEIVERS-SNDNO = FOLDER_LIST-PARNO.
         RECEIVERS-SNDNAM = SY-UNAME.
         RECEIVERS-SNDPRI = '1'.
         RECEIVERS-MSGID = 'SO'.
         RECEIVERS-MSGNO = '619'.
         RECEIVERS-DELIVER = 'X'.
         RECEIVERS-NOT_DELI = 'X'.
         RECEIVERS-READ = 'X'.
         RECEIVERS-MAILSTATUS = 'E'.
    **receivers-ADR_NAME
         RECEIVERS-RESEND = ' '.
         RECEIVERS-SORTFIELD = ' '. "'USER WF_BATCH INDIGO BATCH'.
         RECEIVERS-SORTCLASS = '5'.
         APPEND RECEIVERS.
        ELSE.
          CLEAR RECEIVERS.
          RECEIVERS-SEL = 'X'.
          RECEIVERS-RECESC = 'U'.
          RECEIVERS-RECNAM = 'U-'.
          RECEIVERS-RECEXTNAM = RECLIST-REC.
          RECEIVERS-DELIVER = 'X'.
          RECEIVERS-NOT_DELI = 'X'.
          RECEIVERS-READ = 'X'.
          RECEIVERS-MAILSTATUS = 'E'.
          RECEIVERS-ADR_NAME = RECLIST-REC.
          RECEIVERS-SORTFIELD = RECLIST-REC.
          RECEIVERS-SORTCLASS = '5'.
          APPEND RECEIVERS.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    "fill_receivers_info
    *FORM snd_email *
    FORM SND_EMAIL.
      CALL FUNCTION 'SO_OBJECT_SEND'
        EXPORTING
          FOLDER_ID                  = P_OUTFOLDER
          OBJECT_ID                  = OBJECT_ID
          OUTBOX_FLAG                = 'X'
          OWNER                      = SY-UNAME
          CHECK_SEND_AUTHORITY       = 'X'
          ORIGINATOR_TYPE            = 'J'
          LINK_FOLDER_ID             = LINK_FOLDER_ID
        TABLES
          OBJCONT                    = OBJECT_CONTENT
          RECEIVERS                  = RECEIVERS
        EXCEPTIONS
          ACTIVE_USER_NOT_EXIST      = 1
          COMMUNICATION_FAILURE      = 2
          COMPONENT_NOT_AVAILABLE    = 3
          FOLDER_NOT_EXIST           = 4
          FOLDER_NO_AUTHORIZATION    = 5
          FORWARDER_NOT_EXIST        = 6
          NOTE_NOT_EXIST             = 7
          OBJECT_NOT_EXIST           = 8
          OBJECT_NOT_SENT            = 9
          OBJECT_NO_AUTHORIZATION    = 10
          OBJECT_TYPE_NOT_EXIST      = 11
          OPERATION_NO_AUTHORIZATION = 12
          OWNER_NOT_EXIST            = 13
          PARAMETER_ERROR            = 14
          SUBSTITUTE_NOT_ACTIVE      = 15
          SUBSTITUTE_NOT_DEFINED     = 16
          SYSTEM_FAILURE             = 17
          TOO_MUCH_RECEIVERS         = 18
          USER_NOT_EXIST             = 19
          ORIGINATOR_NOT_EXIST       = 20
          X_ERROR                    = 21
          OTHERS                     = 22.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "snd_email
    go through this.
    Thanks

  • How to convert VHDX to VHD file format on windows 8 / Windows server 2012?

    Here is an article to describe how to convert virtual hard disk VHDX file format to VHD 
    http://anuraggawande.blogspot.in/2012/10/vhdx-to-vhd-conversion.html

    Hi,
    Thanks for sharing the web link!
    You help other community members who facing similar problems.
    Thanks for your contribution to Windows Server Forum!
    To convert VHD format, you can also use Convert-VHD comlet. The Convert-VHD cmdlet converts a virtual hard disk file by copying the data from a source virtual hard disk file to a new virtual hard disk file of a specified format and version type. The format
    is determined by the file extension of the specified files, either .vhdx or .vhd. Conversion is an offline operation; the virtual hard disk must not be attached when the operation is started.
    For more information please refer to following MS articles:
    Convert-VHD
    http://technet.microsoft.com/en-us/library/hh848454.aspx
    Windows Server 2012: Convert VHD to VHDX using Hyper-V Manager
    http://blogs.technet.com/b/aviraj/archive/2012/05/06/windows-server-2012-convert-vhd-to-vhdx-using-hyper-v-manager.aspx
    Using PowerShell to Convert a VHD to a VHDX
    http://blogs.msdn.com/b/virtual_pc_guy/archive/2012/10/03/using-powershell-to-convert-a-vhd-to-a-vhdx.aspx
    PS - Convert VHD
    http://gallery.technet.microsoft.com/scriptcenter/1dd3c524-e4e6-44cd-9573-406151237139
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Lawrence
    TechNet Community Support

  • Problems emailing any other file format other than a .jpg

    I am having problems emailing any other file format other than a .jpg in mac Mail in Leopard. Is anyone else having this problem?
    I have tried PDF, .tif and .doc documents, and they are small files, less than 150 kb. I have checked to ownership on the images and it says that I can read and write to them. I have also checked with my ISP and my mailbox capacity is 10 MB and was recently emptied. I am able to log into my ISP's webmail portal and send these types of attachments through there successfully, which has made me convinced that it has to do with Leopard or Mac Mail because I did not have these problems in Tiger.
    When I send a message like this, Mail says, "Sending" for a while, and then says "Cannot send message using server:(Name of my server) Sending the message content to the server failed. Select a different outgoing mail server."

    I've been sending .doc files with/without also .jpg as attachments without problems so it is possibly not a Leopard problem. I know this doesn't solve your problem though. Someone else may be able to solve the problem.

  • Suddenly non supported file format

    My HDD where the project files reside crashed and after a few day's work I manage to get everything back.
    Premiere Pro CS6 Crash. First "this project contained a sequence that could not be opened" And now "The file has an unsupported compression type". First issue solved but not the file system one. This is on a project I've been working on for a few months. Other software like VLC can use the files so the files seems to be ok. The problem file format is m2ts untouched from cam. And it have been working for a long time before this crash. Dedicated this weekend for the final editing of this project and now.... Sitting here with a beer and cant do nothing.....
    Anyone having a few good cards up their sleeves?
    Using the cloud.
    AMD 9950 X6
    16GB RAM
    a zillion GB HDD's
    Gainward GTX 570 1280MB
    Windows 7 x64
    Message was edited by: SirQsDad

    First. It is not the lack of payment issue I complain about. It is the fact that when payment is not made I get "punished" by having to reinstall the whole cloud. Why isnt the restrictions alone enough? Since it goes back to trail why isnt that enough? If I cant have money on my card when it's time for the monthly payment, I should face limitations for that. That I do. But lets put this in a example. I'm away on a film job out in the field. It gets extended by a week and when I get back home the schedule for editing is down a week due to the extra filming. And since it was hectic out in the field I forgot/no time to make sure there was enough with money on the card for the subscribtion. So when I get home and have set aside time for editing around the clock I have to start with the payment issue. That is taken care of in a few seconds. But then the annoying part is starting. Uninstalling everything, downloading, installing, updating, installing plugins, updating. 100 reboots....  That is extremely annoying. A lot of inspiration for the editing project and a lot of time is lost. And for what reason?
    Second. Who is going to pay the extra credit card I have to have if following your suggestion? Adobe? Probably not. You? Probably not. Meaning that the fee for the cloud went up a little for me. I understand the benefits for that function but in my case it would only be good for the cloud subscription. And that alone is not a good solution for this issue.
    Third. Well I still think this is a bug, unless Adobe have this function implemented to punish people who doesnt pay on time. Then naturally it is not a bug. Maybe Adobe can answer if this is a function that they like or if this is a bug?
    Fourth. If I should get punished why not having a re activation fee instead? I would gladly pay a few bucks to get the software funcioning directly after I pay my subscribtion. That would benefit both me and Adobe. Why sabotage my work? Who is gaining from that?
    Fifth. I have no proof for this. But I also do not want to try it again next month. The time to un-install and re-install is to expencive right now. If I'm wrong I will crawl to the altar and say I'm sorry. But It would also be nice if Adobe did the same if they are wrong.

Maybe you are looking for