When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

Similar Messages

I get error message -3259 when trying to download Version 5 update for I pad, yet the internet connection is still operational. Why is this?

When trying to upload Version 5 update for IPad after the download is complete and the files are being processed I get an error message - 3259 which says the internet connection is timed out but in fact it is still operational. The download is unsuccessful. Why is this?

Try temporarily turning off your firewall and antivirus software until the download has completed.

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

When I send e-mails from my iPad the wrong last name appears, even though I have updated my Apple details. How can I correct this ?

When I send e mails from my iPad my previous last name still appears, even though I have changed it on my Apple a/c.
How can I correct this, please ?

Try this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
 Cheers, Tom

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

I can't send out mail on my computer it sits in the outbox

I can't send out mail on my computer it sits in the outbox

You have omitted all useful information from your post,
Things like, what mail system, there are many, which Mac, many of them as well
Time to describe what you have and what error messages you receive, can't do anything with your question otherwise.

Is there anyway to send a mail from Microsoft Outlook to solution manager?

Is there anyway to send a mail from Microsoft Outlook to solution manager.
If anybody having notes or documents that will be very much helpful for me.
Awaiting for your reply,
With best Regards,
Alexey

Hi,
It is just the inbound mail configuration as like the out bound config.
Below are the required demo, blogs,helps
[Demo on Mail from outlook|https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/5087262b-59ef-2910-abb1-957000b7c3d4&overridelayout=true]
[blog 1 for mail to SAP|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID1382272150DB00641126052855673650End?blog=/pub/wlg/795 ]
[Artical inbound mail config|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10dfad5a-5398-2b10-568b-d3d999d49b5c]
Hope this helps
Jansi

I am unable to send e-mails from my Outlook

Everything was working ok, for ages. Suddenly I am unable o send e-mails from my Outlook.
"The message I get is: 'Unable to send the message. Please verify the e-mail Address in your account properties'.
When I 'Send a Test Message' from Outlook, Tools, Accounts. All actions are completed besides sending a test message when I also get the instruction.

Hi
If it happened suddenly so possibly it was a virus?
I dont know why you are not able to send the e-mails.
I think you should check the email account properties. Check the data of you POP3 and SMTP server.
Im not a outlook expert but this options should be found somewhere in the email account properties.
The last possibility would be deleting of the email account under outlook and then a new creation of the new account.

All my excel files were converted to pdf. Why would this happen and how do i stop it from doing so?

All my excel files were converted to pdf. Why would this happen and how do i stop it from doing so?

shloimypt wrote:
All my excel files were converted to pdf. Why would this happen and how do i stop it from doing so?
Relax, they weren't converted to PDF.
You can tell by right clicking ANY of them and choosing "Properties". You'll see there that they're STILL .xls or .xlsx files. The "association" has changed and Windows now indicates that they open with Reader, which isn't right.
Where it says "Open With" under the General tab, you can click "Change" and re-select Excel as the default app to open thim.
See: http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

My MacBook Pro (Mountain Lion) seems to be making copies of files in my download folder. Why is this happening and how do I stop it?

My MacBookPro with Mountain Lion seems to be making copies of files in my download folder. Why is this happening and how do I stop it?

This issue has nothing to do with Time Machine or local snaphsots. No built-in feature of OS X does what you describe.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I've downloaded itunes 12.0.1.26 3 times after the update and it still doesnt work! Everytime i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use itunes!!!!!!

I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!

Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

HT1386 I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?

I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?

media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit

Sometimes after creating an event folder on iPhoto, all my pictures in that event will be gone the next time I open iPhoto. Why is this happening? Is there a way to retrieve the missing photos?

Sometimes after creating an event folder on iPhoto, all my pictures in that event will be gone the next time I open iPhoto. Why is this happening? Is there a way to retrieve the missing photos?
Most events I make on iphoto will still be there the next time I open iPhoto, while other event FOLDERS will be there, but pictures in it gone.

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

All of a sudden I am receiving photos as winmail.dat files, that I cannot open. What is this, and why can't I open winmail.dat?

All of a sudden I am receiving photos as winmail.dat files that I cannot open. What is this and why can't I open them?

http://www.twistermc.com/583/open-winmaildat-files-mac/

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

Similar Messages

Maybe you are looking for