Stalled Workitems in Adobe Workflow Server 6.2

Can I restart programatically a stalled work item using epsdk and vb?

Can I restart programatically a stalled work item using epsdk and vb?

Similar Messages

  • Crystal reports and adobe workflows server

    Hi,
    Is there a way to integrate crystal reports and adobe workflow server
    Regards
    Raja

    I believe AWS 6.2 supports Crystal Rpt 8.5, but don't hold be to it.
    The AWS appl. does come with prebuilt reports incl. You should check the documentation concerning installation, but I believe AWS requires the Crystal Engine to be installed on the same server as the AWS Web Access component.

  • How to convert PDF file into binary using APIs of Adobe Workflow server?

    I m using the Adobe Workflow Server 6.2. I want to write a web services to convert PDF file into binary and embed this binary data with XML.
    I want to use the APIs (or libraries) of Adobe Workflow server but dont know abt the APIs or Libraries that can convert the PDF file into binary format.
    I will be very thankful to u,if u can help me as i m n this prblm frm the last one week.I tried alot but could nt find the solution.
    waiting for a better response.

    check objectlibrary.pdf
    Dim o As New EPSDK.BinaryData
    o.LoadFromFile(sfilename)
    write o.Value to xml

  • Executing SAP BAPIs in Adobe Workflow Server

    Hello there,
    I'm trying to use the following BAPIs to create an absence record for employee using a web enabled form with Adobe workflow:
    BAPI_ABSENCE_CREATESIMULATION
    BAPI_ABSENCE_CREATE
    But it seems they are not stable? Or at least do not give the expected results.
    The dates are correct and there is no conflict with the SAP calendar.
    Dose any one know a better way to create the absence record? Is there any RFC to do that? Or should I use ALE/IDoc to post the transaction?
    Many Thanks

    Hi Harish,
    Create an action in web dynpro which carries out the business processing. Assign this action to InteractiveForm UI element's onSubmit event.
    This specifies that when you click the SubmitToSAP button in the form, the event onSubmit is triggered which actually executes the code provided in the Action.
    Steps:
    when you go to interactive form's properties,
    you can see in the Events' section two events....
    1).onCheck
    2).onSubmit
    just create an action for onSubmit event and choose the action from onSubmit dropdown in the Properties of Interactive form.
    just go to the implementation of the same view and you will find a method for it already created for you to write your code in.
    In addition also make sure that you have installed the xACF component on the client machine.
    Hope this helps.

  • CS6 not opening because ExporterQuicktimeHost.bundle issue. Adobe QT32 Server seems to be the issue

    Hi,
    I am currently very frustrated with a CS6 issue. For no apparent reason (no update, change or new software) Premier, AfterEffects and Media Encoder all stall while opening on ExpoerterQuicktimeHost.bundle. It seems it is directly related to codecs and Adobe QT32 Server. If i remove certain codecs, then the programs work, however this is no use to me, because i need those codecs for the projects i am working on. Similarly, if i force quit Adobe QT32 Server as a process, then the program opens, however the codecs in question just dont work.
    How can i get refresh / reload / reconnect the Adobe QT32 Server process so that it opens the needed codecs??
    I am running:
    MAC OS X Lion 10.7.5
    2.8 GHz i5
    20 GB 1333 MHz DDR3 Memory
    HELP!

    Laurens--
    I'm having exactly the same problem. Was that the final resolution — to download and install Quicktime player 7.7.1?
    Thanks,
    Ron

  • Adobe QT32 Server.exe Premiere CS6 Pro and Media Encoder

    Hi,
    Been having intermittent issues with this. I'll be trying to render, or even just scrubbing through a clip in the timeline and Adobe Media Core CS6 has stopped working pops up:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe QT32 Server.exe
      Application Version: 6.0.5.0
      Application Timestamp: 5211c5c2
      Fault Module Name: ntdll.dll
      Fault Module Version: 6.1.7601.18247
      Fault Module Timestamp: 521ea8e7
      Exception Code: c0000029
      Exception Offset: 00090892
      OS Version: 6.1.7601.2.1.0.256.48
      Locale ID: 2057
      Additional Information 1: e8ad
      Additional Information 2: e8adce1c2b9e7be834b4063ac3c53863
      Additional Information 3: e8ad
      Additional Information 4: e8adce1c2b9e7be834b4063ac3c53863
    Doesn't always do it, but now I've found an instance where it's reliably repeatable. As I scrub through a certain part of the footage, it crashes. Or it crashes at the same point during rendering.
    I've succesfully edited and rendered clips made from the same cameras, recorder (Tricaster 410) - even from the same actual media file. I've tried updating QuickTime, uninstalling, reinstalling QuickTime, doing windows updates, updating GPU drivers from Nvidia, clearing media cache DB, launching Premiere while holding shift. Nothing makes a difference.
    System is an 2 CPU Intel Xeon E5-2687W 3.1 GHz, 64GB RAM running Win7 Pro 64.
    Anyone have any suggestions that don't involve reinstalling CS6?

    ...BE AWARE.....the newest versions of PPro CC 2014 contain a "fix" for your problems with the .MOV  32 bit codec. Somehow, .MOVs are NOW handled in a 64 bit environment by PPro which REMOVES the CRIPPLING use of the 32 bit Quirktime process, and ALLOWS much greater memory to be used than the old 4 GB limit.......I've seen the DRASTIC improvement myself on my Haswell laptop. I am not sure about Media Encoder, however, it would be STUPID if the same improvement was not also made with THAT program. CS6 does NOT have this improvement.....and WILL not updated to get it.  If I return to PPro 5.5....the "old" crappy performance returns with Canon MOVs......even on a TWICE as powerful machine !!!!.....UGH !!!
    ....Better to submit to the "subscription model" and its pecadillos that try to edit with a QUIRKTIME hobbled workflow !!!!

  • Proxy between Flash Media Live Encoder and Adobe Media Server

    ciao,
    I encode from a pc with Adobe Flash Media Live Encoder to a server with Adobe Media Server. And this configuration works well.
    The actual configuration is:
    1) computer A (es: 192.168.1.5 - gw 192.168.1.254) point to computer B
    with FMS url: rtmp://COMPUTER_B_WAN_IP/live and StreamName
    test?user=useruser&password=userpassword
    2) computer B (es: 210.22.11.134) with Adobe Media Server
    But now I need to encode from Adobe Flash Media Live Encoder (computer A) to a pc (computer P) and then redirect the rtmp stream to the Adobe Media Server (computer B). Those 3 computers have different lan configurations. If I use rtmpsuck (http://rtmpdump.mplayerhq.hu/) on computer P, can I use it like proxy to redirect the computer A rtmp flow to computer B?
    I suppose:
    1) computer A (es: 192.168.1.5 - gw 192.168.1.254) point to computer P with FMS url: rtmp://COMPUTER_P_WAN_IP/live and StreamName test?user=useruser&password=userpassword
    2) on computer P (es: 10.10.10.8 - gw 10.10.10.254) I install
    rtmpsuck, I open port 1935 on his firewall and I configure iptables
    like: iptables -t nat -A PREROUTING -p tcp --dport 1935 -j DNAT
    --to-destination COMPUTER_B_WAN_IP:1935
    3) on computer B I do nothing.
    Now I have 3 questions:
    1- Can it works?
    2- On computer P (the proxy) I must install rtmpsuck and rtmpsrv or I can install only rtmpsuck? I don't necessary need to record the stream
    3- Is there another way to do this? Is there another software to redirect the stream?
    Thankyou
    M.

    Please update us when FMLE OSX is deployed.  BTW, I get that the server market is dominated by LINUX/WINDOWS and this is a FMS add on. But, my shops creative workflow is Mac based for obvious reasons.  Encoding is part of our editing workflow and thus needs to be mac based.  Throw us a bone please.

  • Lengthen or Remove Login Timeout on Workflow Server?

    How do I lengthen or remove the login timeout for users on Workflow Server?

    Perry,
    The default is currently set to 20min - I ran a quick test here and if you de-Select "Enable Session State" chkBox you will be unable to login.
    I was under the impression that WA no longer relies on sessions, more of a stateless connection. Meaning that everytime an action is performed in WA by an EU it looks in memory ( I think ) for past credentials for that person and uses it again to reconnect. This allows the abilty for web farming.
    InTempo (older version) relied heavily on ASP Sessions which was indirectly related to the setting in IIS.
    You may wish to ask your IIS Admin or possibly bring it up with Adobe Support. I'll see if I can follow-up with a bit more research but I'm quite busy at the moment so it probably won't be until late next week.
    Good luck.

  • Adobe Content Server 3.0.1 Store and Library conflicts

    Dear All,
    I am working on Adobe Content Server 3.0.1 and able to configure it to ecommerce site but i am unable to package the books when both library and store is configured on my Adobe content server 3.0.1 at a time.
    please let me known the version of the content server i using is licensed to use only store or a library at a given time.

    We configured Adobe Content Server 3.0.1 and created one store and one library, when we want to lend a eBook i am unable to locate the option for lending the eBook in "Availbility" tag page of "Books" Tab when i set the "Adjust" option to value "Loan".
    Please let me know whether my version of content server allows us to package a eBook for lending if so where can i find the option for lending the eBook.

  • How do I use Adobe Media Server 5 on Amazon Web Services?

    Adobe Media Server 5 on Amazon Web Services was suggested to my project manager as a way to deal with some of the video we have to host at work, but after signing up and poking around, I'm wondering: how do you actually use it? Is it something that requires the Media Server software, or is there a web interface through AWS? I follow the links, and they tell me it's already active for my account - but I still see no way to use it.
    Thanks in advance for help on this seemingly remedial question!

    Hi,
    Please have a look at the document and let me know if it helps you get started: http://help.adobe.com/en_US/adobemediaserver/amazonec2/adobemediaserve r_5.0_amazonec2.pdf
    Thanks,
    Apurva

  • Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

    I could help.
    When exporting to Encore or Premiere, the program block.
    In the Activity Monitor shows me these two errors:
    Adobe QT32 Server (Not Responding)
    PPro Headless (Not Responding)
    Technical Specifications:
    MAC OS X 10.9.5
    Adobe Suite CS6
    graphics card: AJA KONA LHi
    Can you help me please
    Thank You

    Have you checked out this post from Adobe?  I know it says for After Effects but it definitely applies to Premiere too.  We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

  • Questions on the capabilities of the Adobe media server and system requirements

    Hello
    We need to send multiple video streams on different computers and screens in our organization. To do this, we need a dedicated server with the following functionality:
    - transmit up to ten (or even more) HD and FullHD streams simultaneously
    - manage playlists in real time without relaunching stream every time after adding items to the playlist
    - imposing of any text and video effects
    - use a variety of sources: a folder with pictures for the slideshow, video and audio files, video capture devices, video streaming from other resources
    Is Adobe media server suitable for our tasks?
    What are the system requirements (I do not mean minimum requierements)?
    If we buy adobe media server, will it be enough? Or we will have to buy additional software products to provide all the necessary functionality?
    Thank you.

    1 and 2 is possible
    3 is not
    4 AMS is not an encoder and does not encode or create streams.You have to use other software for that.Adobe FMLE is for live streaming...Use third part software like manycam(a virtual webcam on your machine) to generate video sources out of slide shows.

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • Adobe QT32 Server.exe has stopped working?

    Everytime I exit Premiere cs5 or media encoder cs5 this error message would pop up.  Currently it doesn't seem to effect the programs, it is just really annoying.  Does anyone know what is wrong and how to fix it?

    I get this error when I start Windows.
    Since I seldom use Premiere I don't want to give access to its services to contact any servers at all.
    And also, I Windows firewall should show a message when blocking a new program, according to my firewall settings, and I don't find Adobe QT32.exe in the firewall list of programs.
    The only Adobe program I've got installed is Adobe Premiere Elements 13, but it seems to have installed some unwanted services...
    The error as it appear in my Event viewer (labels in Swedish):
    Felet uppstod i programmet med namn: Adobe QT32 Server.exe, version 7.0.1.0, tidsstämpel 0x53ff367c
    , felet uppstod i modulen med namn: QuickTime.qts_unloaded, version 0.0.0.0, tidsstämpel 0x4cf4536a
    Undantagskod: 0xc0000005
    Felförskjutning: 0x638abb89
    Process-ID: 0xe6c
    Programmets starttid: 0x01d0409e462c57d0
    Sökväg till program: C:\Program Files\Adobe\Elements 13 Organizer\caheadless\Adobe QT32 Server.exe
    Sökväg till modul: QuickTime.qts
    Rapport-ID: 88758cb0-ac91-11e4-aa0b-080027002028

  • Adobe Premiere Pro CC 2014.0 has stopped working & Adobe QT32 Server CC 2014.0 has stopped working

    Hello,
    I just installed Adobe Premiere Pro CC 2014 as trial to see if its working on my system but as soon as i launch it, it crashes with the following errors on splash screen: Adobe Premiere Pro CC 2014.0 has stopped working followed by Adobe QT32 Server CC 2014.0 has stopped working.
    System Info:
    Windows x64 bit
    16GB RAM
    Intel Core i7-4770 CPU @ 3.40GHz 3.39GHz
    NVIDIA GeForze GTX 660 (fully updated)
    I turned off Windows 7 Sync Center (suggested in adobe forums) but it didn't help.
    I tried running it as administrator, and playing with the permissions but nothing helped.
    Please help me with my problem.
    Thank you,
    James

    I have the same problem too.
    I try format pc ans reinstall win7 64 bits totally clean, but nothing...
    Drivers are update, intel i7,nvidia gtx 760,all works fine in all aplications and games.
    When open media encoder or premiere or after effects crash is startup and show message adobeqt 32 stoped.
    The sp1 are install too.
    I think what adobe cc 2104 fails hards and adobe needs fix this.
    The solutions how reinstall or update drivers not work, fix a problem please.

Maybe you are looking for