Standalone report server not found on the network between logical partitions on AIX

Hello,
Here s our architecture:
forms/reports11gr2(patchset 1)
weblogic 10.3.6
on IBM AIX 7.1
Server JRE
Java(TM) SE Runtime Environment (build pap6460sr13ifix-20130303_02(SR13+IV37419) )
IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr13-20130114_1
JRE -client - 1.6.0_27
We have 2 logical partitions separated in 2 different physical m/c where cluster of forms /reports is installed.
if i have a report service repsrv11g on one logical partition say, box 100 on Physical box 6000, the other logical partition box101's forms server on physical box 7000 is not able to look up the report service when calling from Forms using the Run_report_object.
Gives, FRM -41213 error.
If i just run the URL(use 2nd box) with http://101:8888/reports/rwservlet/showjobs?server=repsrv11g, it gives REP-51002: Bind to Reports Server repsrv11g failed
We thought/read that as long as they re on the same network / domain, report service is available.
Also did rwdiag.sh on one partition, its not able to find the other one.
Ran the test form which Oracle provides and it s also not able to find the report server on the network when run on the other lpar.
Temporarily, we created another report service on the other lpar but still using loadbalancing dns while doing web.show_document, so, it could potentially fail to bring up a report if load balancer redirects from one form's server to report server on the other partition.
Any thoughts would be greatly appreciated.
Thanks.

Hello,
Any inputs on this pls?

Similar Messages

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out"

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

PDF printing--tomcat/cocoon installed, but report server not found------

As I understood, APEX 3.1 requires either BI/FO tools to enable PDF printing.
As I do not have BI license, and as I happened to check a very good link on a blog which had a detailed viewlet on apache-cocoon route for PDF print enabling, I downloaded the tomcat, cocoon source files, built the cocoon .WAR, put it in required place as instructed, started tomcot (ran into pronblems because of port conflits, resolved these by configuring different ports for 8005 and 8080 ports).
Now, when I want to configure the external report server, I am stuck.
I am not able to locate 'Instances' tab, or 'manage environment settings ' tab in 'manage services'
I am able to find only following tabs in 'manage services' under HOME.--> Administration ----> Manage services
1) session state
2) caching
3) workspace preferences
4) applications
5) workspace
6) workspace schema reports
7) Logs
Can anyone help me to find out where to configure the 'report server' now?
Thanks,
suresh.

Sorry, it was a silly problem:) You have to be logged in as admin to 'see' the 'instances' tab. maybe in all the tomcat/cocoon build/config issues, this simply got off my head!
now, the problem of print server config is over, I have configured the same. the 'print' link is available now in report region, when I run the report. but when I click the 'print' link, it is taking ages...or rather it is still processing...!!
Can anyone please point out to me now what is the problem...?
thanks.

Purchasing Shopping Cart - Server Not Found - Is the album not available?

I recently tried to purchase an album through my shopping cart. When I click on "Buy" I receive this message: "The contents of your chart have changed, please review".
After clicking "Refresh" I receive the following message: "We could not complete your music store request. The server was not found. There was an error in the music store. Please try again later."
I read in another post that this means that the album is no longer available. Is this true or is there another issue?
I received a message back from Apple stating that I need to unistall and reistall iTunes 6.01. I doubt that because I can purchase other music without a problem. It is just this particular album that is giving me issues.
Anyone else witnessed this issue?
Thanks!

I've been back and forth with Apple via email three times in the past couple of days with exactly the same error messages. In their last email they asked for a lot more detailed information so they can start tracking things down. This is not an isolated incident as there is a growing number of threads from both the US and Canada appearing on the list. Hopefully they'll figure it out very soon.
Mac OS X (10.4.3)

My email was working fine on my i -phone s for 3 weeks and now i cannot receive or send e-mails on the same account, i have deleted the account and tried to add it again it comes up with messages like 'yahoo server not found' or asks me to keep typing my

How can i set up my email account on my i-phone s 4 . it was working fine up till saturday. The icloud account works fine
I have deleted and added again but it says i cannot send or receive emails even if i save acccount.Asks me to type in my password which i keep doing without results, i have even had to change my password in the process. I also comes up with a message saying 'yAHOO SERVER NOT FOUND' WITH THE MESSEANGER IT SAYS YOU CANNOT SIGN IN NOW TRY LATER. I HAVE BEEN ON THE ISSUE SINCE 10 AM

it seems that after a upgrade these days you get problems ???
Sadly so far too often.
Since it's on more than one, I think you should contact BT, there are several 5.7.1 meanings...
https://support.google.com/a/answer/3726730?hl=en

Firefox 4 on Mac goes through periods of time where it brings "server not found" or "problem loading page" pages. I have to re-start firefox to get it to work again. Works fine on Safari.

Hi, ever since I was prompted to download the new Firefox 4, I have continuously been having this issue. I will type in a domain name and it will automatically prompt me to "server not found". The websites work fine on Safari and Google Chrome, but not firefox. I have uninstalled and reinstalled firefox about 4 times and I really need a solution!
Also, I have done all of the IPv4, Cache, and other solutions listed in the article on having certain sites not load. I'd appreciate some help! Thanks!

Did you ever fix this, because I am having the same problem

Report Subscription - Failure writing file - The network path was not found.

I have several subscriptins which have been working fine.
All suddenly stopped with same error - Failure writing file - The network path was not found.
The subscriptions write to a number of different network paths, all of which exist and are accessible.

Is this a repeating failure or one time occurrence? If it's a one time occurrence it could have been a short network outage. If repeating look and ensure the user that the subscription is using to write the files still has the appropriate permissions,
is enabled, not locked, etc. Other things to possibly consider would be flushing the dns cache on the server. It's possible a firewall rule could have been put in place that would block the ability to access said location as well. The best
thing you can do is start by asking "what has changed".

The server could not be found on the network ORA-12154

Hi All,
I have problem with one application. She run with Oracle DB. I installed Win2008R2 x64 and Oracle DB 32bit on the same server. I tried connect to DB via Oracle SQL Developer and SQL Plus and both run without problem, but when I insert the same parameters into application OpenText Content Server 10, then I see this Error:
Content Server Error:
[Error: The server could not be found on the network. ----> Error stack ----> 1) E675414020:The server could not be found on the network.:ORA-12154: TNS:could not resolve the connect identifier specified ]
This application need only 3 parameters (System User Name, password and service name). I compare it with ORA files (listener, sqlnet and tnsnames) and I think that all is right. Here are this three files
listener:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
sqlnet:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
tnsnames
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Do you have any idea where is problem?
Thank you
Vaclav

893964 wrote:
Hi All,
I have problem with one application. She run with Oracle DB. I installed Win2008R2 x64 and Oracle DB 32bit on the same server. I tried connect to DB via Oracle SQL Developer and SQL Plus and both run without problem, but when I insert the same parameters into application OpenText Content Server 10, then I see this Error:
Content Server Error:
[Error: The server could not be found on the network. ----> Error stack ----> 1) E675414020:The server could not be found on the network.:ORA-12154: TNS:could not resolve the connect identifier specified ]
This application need only 3 parameters (System User Name, password and service name). I compare it with ORA files (listener, sqlnet and tnsnames) and I think that all is right. Here are this three files
listener:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
sqlnet:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
tnsnames
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Do you have any idea where is problem?
Thank you
VaclavYou listener has nothing to do with this error. Your request for a connection never left the client machine.
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Site gives message Server not found; ;Firefox can't find the server at (site name). Address is correct, network is connected. Don't have problems with most sites. Others can access this particular site easily.

Can't open any of the National Parks Service Civil War Soldiers and Sailors Systems sites. Get the message Server not found although others are able to open it easily. Network connection is good and addresses are good.
== URL of affected sites ==
http://www.civilwar.nps.gov and all National Parks Service Civil War Soldiers and Sailors System

Such behavior can be an indication that you are infected.<br />
In such a case you can use another computer to download the program and save the file to an USB stick.<br />
Be sure to download the latest databases.
You can try an online anti-virus scanner.
* http://www.google.com/search?q=Online%20Antivirus%20Scanner
* http://housecall.trendmicro.com/ HouseCall - Free Online Virus Scan - Trend Micro USA
* http://vms.drweb.com/online/?lng=en Dr.Web - innovation IT-security solutions. Complex protection against Internet threats.
* http://www.eset.com/onlinescan/ - Free ESET Online Antivirus Scanner

Dreamweaver reports file "not found" when attempting to open files from SMB server...

User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!

I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2                           1951845952 224463456 1726870496    12%    /
devfs                                         360       360          0   100%    /dev
map -hosts                                      0         0          0   100%    /net
map auto_home                                   0         0          0   100%    /home
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website-1
map -fstab                                      0         0          0   100%    /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious.

Error "kdc: Server not found in database" on attempted connections using Network User Credentials

I am rebuilding my system after a recent debacle with Time Machine, which resulted in a complete wiping of my Open Directory contents. At this point, users can log into various computers on the network, when the hosts have been reconnected to the newly formed Open Directory and the trust certificate has been authorized. However, when users attempt to connect to any file share, the Network User Account credentials fail to gain access.
I am running Mac OS X 10.9.4 on all systems. Two mac-mini's are running OS X Server 3.1.2. One of these servers (mavericks1.pediatricheartcenter.org) is the Open Directory. While testing the system, I am using the console on "Mavericks1," so the following discussion involves communication between the two server hosts only.
From Mavericks1, I open the console and attempt to connect to my file server, named fileserver.pediatricheartcenter.org. I clear the console just prior to sending a "registered user" request to "FileServer" to gain access. Careful examination of the console records shows the following:
1. The Network User is authorized with a message "ENC-TS pre-authentication succeeded".
2. Mavericks1 lists a console message that reads "kdc: Server not found in database: krbtgt/[email protected]:no such entry found in hdb"
3. Mavericks1 lists a console message that reads "kdc: Server not found in database: cifs/[email protected]: no such entry found in hdb"
4. The process registers what appears to be a final failure before trying again with "kdc: Failed building TGS-REP to 127.0.0.1:64390"
FileStorage.local does not exist in the DNS, nor does it exist on FileStorage.pediatricheartcenter.org. That (local) host name was removed when the domain host name for filestorage.pediatricheartcenter.org was created.
1. Why does the kerberos process reference a host name that does not exist?
2. What might be causing the failed authentication exchange?
3. What can be done to remedy the issue?

I spent some time on the phone with Apple Support on Friday. Thank you to Linc Davis for providing some insights into the issues.
As a result of the conversation with Apple Support we learned the following, which I will report here for those who might find this page again:
First, OpenDirectories are extremely fragile. Once you have turned on your OpenDirectory, do not do any of the following:
Do NOT change the host name.
Do NOT change the IP address.
If you are going to attempt either of these things, you should make a clone of your drive (not just a TimeMachine backup, a fully bootable clone, just in case).
Performing these activities (particularly the changing of the host name) will "break" your open directory, and the only way to rebuild the open directory is first to fully destroy the original. Several services are also destroyed when OpenDirectory is broken, the most notable is Profile Manager.
DESTROYING OPEN DIRECTORY
To fully destroy OpenDirectory, it is more complex than simply turning off the OpenDirectory and turning it back on again. Perform the following steps:
Install WorkGroup Manager (it is depricated, but Apple still has a version available for use with OS X Mavericks to handle functions that the Server App does not perform like exporting users and groups).
Sign into WorkGroup Manager as the directory administrator (user name defaults to "diradmin" the password is defined on OpenDirectory creation).
Export the Users, Groups, Computers and Computer Groups to the Desktop or another safe location.
Close WorkGroup Manager
Turn off the OpenDirectory in Server App.
Delete the Server App from the Applications folder and put it in the Trash. (This will disable any active services that are marking various files as being currently in use. Don't worry, we will restore it from the Trash when we are done).
In the terminal, run the following command: sudo slapconfig -destroyldapserver
Make a backup of all website files (just in case)
Navigate to the folder /Library/Server and delete the ProfileManager folder. (If you willing to do so, delete the whole Server folder).
After deleting various folders in the /Library/Server directory, restore the Server.app from the Trash.
Run the Server App.
Set the computer's network connection and host name.
Create a new OpenDirectory.
Use WorkGroup Manager to import any exported files from Step 3.
If you deleted the entire Server directory, use the website backup to retrieve the files that comprise your web site(s) and use the Server App to link the file directories to the Web site's domain name(s).
Personal Note: These instructions got me farther than any other tips I had received previously. After following these instructions, I was able to rebuild my Open Directory. During the process of copying files from the old user home folders into the new user home folders, the computer froze and when it rebooted, all the users and groups I had created during the day had disappeared. Rather than trouble-shooting it again, I decided to do a fresh installation.
A NOTE ON HOME FOLDERS
PER APPLE SUPPORT: Do NOT use the default /Users directory for Network users. Apple Support wanted me to rebuild the home directory, but they noted I was not able to do this, because I had used /Users. This folder ("/Users") is a critical component of the OS X system, and will cause additional problems if the folder is destroyed and rebuilt. The directory id and permissions must remain unchanged from the original installation.
For this reason, Server administrators (like yourself) should use File Sharing in the Server App to create a new anchor point for home directories. Create a shared folder. Ensure that it is shared over the protocols that you will be using (AFP, SMB, WebDav), and then after selecting these values, check the box that allows the folder to be used as a home directory at the bottom of this list. This box will be greyed out if the system is not already bound to an OpenDirectory. If you have activated OpenDirectory on the same machine, the machine will operate as if bound to itself, and this field will be active. If the FileShare server is NOT an OpenDirectory master or replica, then bind the machine to an OpenDirectory via the "System Preferences > Users & Groups > Login Options".
If the local area network has FileShares that are enabled for home directory use, the folders will appear in the User Profile editor under the Home Folder list (See image)
In the screenshot above, I have selected a shared directory named "HomeFolders". By using specially defined home folder directory, the server administrator has the option of deleting and modifying the home folder if necessary. Creating a home folder directory in a location other than "/Users" is the recommended best practice by Apple Support.
If you are inserting files into the home folders, you will need to change the owner and the group to the new owners names. I copied files from the old user directories into the new user directories so that the users would have access to their old files. When my OpenDirectory crashed, and all the users were recreated, they were recreated with different system level user id's. The system therefore maintains a memory that the file was owned by the original owner, even though the system administrator has put it in the new user profile's folder. To fix this, do the following:
1. Prior to making the copy, run "ls -al" from the terminal on the new home directory root. You are looking for the default folder owner and default folder group. On my system it was the user name and a group named "staff".
2. When making the copy, do not replace the user folder. Copy the files into the file folder, not over it.
3. After you have moved files into the user's folders, you can use "sudo chown -R [owner]:[group] [homeFolderPath]/*" and "sudo chmod -R 700 [homeFolderPath]/*" (replace the [owner] and [group] portions of these commands with the owners and groups identified by the command in step 1, and replace [homeFolderPath] with a path to the user directory created for the specific user.
For example:
For the user johnnybgood, we might see the following:
1. We run "ls -al" on the newly created home folder and find that the folder /Volumes/HomeFolders/johnnybgood is owned by johnnybgood and the group "staff".
2. We copy or move files from the old locations using commands similar to the following:
       sudo mv /OldFolderLocation/johnnybgood/Documents/* /Volumes/HomeFolders/johnnybgood/Documents
       sudo mv /OldFolderLocation/johnnybgood/Desktop/* /Volumes/HomeFolders/johnnybgood/Desktop
       sudo mv /OldFolderLocation/johnnybgood/Music/* /Volumes/HomeFolders/johnnybgood/Music
       ....etc....
       (notice how we are not just moving the old johnnybgood folder to the new location.)
3. Next, we change the ownership and file permissions:
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Documents
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Documents
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
4. Let the user log in and use the system normally.

While playing or trying to open yahoo, sites go down with messages: Unable to connect, server not found, connection has timed out or the connection was reset.

this happens while opening yahoo or while playing a game. has been happening since July. WHY?
I AM NOT COMPUTER LITERATE, NEED EXPERT HELP!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
Another possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

My iPad2 "could not be found on the network" and won't sync

Please Help!
My iPad 2 won't sync and doesn't seem to be "seen" by my PC.
I have rebooted, restored and reset the iPad, and installed latest ios.
PC is running Windows 8 with latest iTunes whic has been re-installed.
The USB port and cable work fine - I don't have the the same problem with my iPhone 4S.
The iPad logo comes up in iTunes as a device, and I get the "pinging" noise when connecting. The iPad details come up in iTunes, but I can't back up or connect or do anything witht it.
It won't sync and I get error messages:"iTunes was unable to load data class information from Sync Services"
and in one of my explorations
"iPad could not be found on the network"
Sometimes when the Ipad is connected iTunes will be ok for a short time, then go into "not responding"
When I try Windows Explorer the iPad does not show in the "Removable Storage" section like it used to, and like my iPhone still does.
In Device Manager, Apple iPad Properties, I get the message "This device cannot start (Code 10)". On line searchinh suggests this could be a driver problem however when checking for drivers I got the message saying my drivers were up to date.
Please HELPPPPPP!!
Thanks

It's now sorted - a driver problem
I found this tip in another thread. Thanks LexLester
LexLester
Re: How to transfer pictures from iPad to PC? 06-Dec-2013 09:51 (in response to amershiraz)
When you are connecting your iPad with your PC, go to Control Panel, click 'view devices and printers' under Hardware and Sound. Your iPad device should be shown in there even it is not showing in My Computer. See whether there's troubleshoot for Apple iPad. Then troubleshoot it. It should be the device driver which is not functioning or being disabled or not up to date. You should be able to find your iPad under the Portable Devices in My Computer after the troubleshooting.

I keep getting the following error "server not found.....firefox can't find the server at http." when I try to log on to one certain website.

I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Cody

go through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]]

Standalone report server not found on the network between logical partitions on AIX

Similar Messages

Maybe you are looking for