Standard extractor for forecast & consumptions values (prow and mver table)

Hi All,
Is there any SAP BI standard extractor for forecast and consumptions data ?
For information,
ECC6 Forecast table : PROW.
ECC6 Consumptions table : MVER.
Thx.
radj.
Edited by: Radjech Radjech on Jul 27, 2011 11:13 AM
Edited by: Radjech Radjech on Jul 27, 2011 11:25 AM

I have created a generic extractor, in the past, with the FEBEP table. However, my requirement was to join it with the BSID and BSAD tables in order to determine payments that have been received into the lockbox but not cleared, so that the Credit Department has a more up-to-date look at customer accounts.
If you have multiple companies you could end up with a Cartesian product when the data for this view is rendered because the Accounting Document and Fiscal Year don't uniquely identify records in BSEG and BKPF. Additionally, you wouldn't know exactly which Accounting Document Line Item is the correct record on BSEG. Both of these cases are potential sticky points for both a custom view or User Exit in CMOD, unless you've been given by the end customer a way to mitigate these. For instance, you may be able to derive the Company Code for the FEBEP entry by using the Cost Center or Profit Center, unless your Cost Centers or Profit Centers can span across companies.

Similar Messages

  • Standard Report to check consumption values for multiple materials

    Hi,
    Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
    Thanks,
    Swapnil

    Dear Swapnil,
    Report MCRE is widely used for the material cosnumption than checking in COOIS.
    Also these reports can help you.
    MCPF                 Material analysis: Dates                
    MCPO                 Material analysis: Quantities           
    MCPW                 Material analysis: Lead time            
    Regards
    Mangalraj.S

  • Which order type gets collected and is used for forecast consumption

    Hi all,
    I would like to know which Order Types (transaction types) get collected into ASCP (appear as demand) and which Order Types are used for forecast consumption.
    I tried to find something in the user guides, but had not yet success :(
    What I want to do:
    1. decide which order types are collected or not
    2. decide which order types consume forecast or not
    Anyone any advices?
    Big thanks in advance,
    David.

    Hi,
    Rather speaking like Order types, we may use word Sales Order. ASCP will collect all the Sales Orders for which we need to intiate action for Supplies. How it is determined?. It is determined from SO lines where in we have So lines are scheduled(it is prt of Workflow action too) and It is flaged 'Yes' for "Visible Demand Flag" . This is what designed functionality. We do not care what type of order type it is.
    thanks,
    dr

  • Standard Extractor for Sales Overview report

    Hi Experts,
    Can you all please help me in finding the Standard Extractor for Sales Overview Report, fields like Product Group, Product, Net Sales, Billed Qty, Sales Plan, % Variance Plan etc are present in this report, i tried to search this in transaction RSA5 but wasnt able to find it. Also, if there is no std extractor then can you please provide me the name of the database table so that i can create a generic datasource on it.
    Thanks & Regards,
    Amit Naik

    Hi Sathya,
    I have received an initial Requirement from the Client (Please refer the list below), It gives us the Report Name & the fields involved in it, i need to tell them the feasibility, can you help me on this? Are there any std reports available for the same?
    Report                          Possible fields
    On Time Delivery-     Month to date on time in full, Year to date on time in full
    Pick Performance-     Days from Pick List Receipt to Despatch
    Delivery Performance-     Days from Order receipt to despatch
    Costs-                          Total Cost per unit despatched,Labour Cost per unit despatched,Monthly spend vs budget by cost centre
    Stocks-                          Openshaw Stock Volume vs budget,Openshaw Stock Value vs budget,Stock Movement by product / range month on month,Stock Turn
    Returns-                          Volume and Value by major type
    Orders in Pick-     Volume and Value
    SMU-                          Outstanding Special Make Up Work
    PI -                          Percentage bins 100% accurate
    Space-                          Count of empty bin locations     
    Progress to Budget for month-     Budget, Forecast and latest estimate.,Invoiced to date, in pick, outstanding,Shortfall to find.
    Profit and EBITDA-     By Brand / Customer / Account
    Monthly pack     -                     Equivalent
    Outstanding PO's-     Volume and Value, by brand / category,Expected receipts this week,View of inbound scheduler (Empirica)
    Vendor Management-     Value of PO's with major vendors,Vendor on time delivery,Vendor Rejections / QC problems
    In Bound Carriage-     Cost of Carriage for month vs budget,Airfreights agreed,PO's Inbound
    Out of Stock Report-     Items where there is zero or projected to be zero stocks,Back Order volume value
    Progress-                          Number of designs in development,Number of designs late against Critical Path
    Thanks & Regards,
    Amit Naik
    Edited by: Amit Naik on Sep 20, 2010 9:28 AM
    Edited by: Amit Naik on Sep 20, 2010 9:35 AM
    Edited by: Amit Naik on Sep 20, 2010 9:38 AM
    Edited by: Amit Naik on Sep 20, 2010 9:43 AM

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • User exits/BAdIs for Forecast consumption by sales order

    Hello Experts,
    My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
    My requirement is:
    For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
    I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
    I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
    I appreciate if anybody explain me the process?
    Thanks in advance!
    Raj

    Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
    There is no standard way of making the sales order visible in another location.
    Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
    Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
    Can you be more specific.
    THanks
    Kumar

  • Standard extractors for pricing conditons in CRM

    HI Guys,
    I would like to extract pricing conditions from CRM and wondering if there is a standard extractor for that.
    thanks

    Hi Bhat,
    There is no standard CRM datasource to extract pricing information. I have attached a document to this message with a suggestion on how you might create your own extractor to load the pricing information, see the document pricingconditionssuggestion.DOC. Please note that this is only a suggestion and there is no guarantee that it will work
    or meet your requirements. If you implement the suggestion though please let us know the results.
    Best Regards,
    Des

  • Standard extractor for ECC table BFOD_A

    Dear Gurus,
    Do we have any standard extractor delivered by sap to extract data from ECC table "BFOD_A".
    Also this table does not have any timestamp field..so in case we create generic datasource on this table how to do we extract delta.
    Thanks,
    Sandeep

    As far as I know there is no standard extractors for this table. You are trying to get AR by Profit Center information? The FI consultant had tried adding a timestamp field but unfortunately the customized program is not 100% correct (as we have missing data in delta). So we just created a generic extractor on this table and perform weekly full load until the customized program got fix.

  • Standard extractor for crm

    Hi everybody,
    What are the usually used standard extractor for CRM especially TPM and Chanel Management. Can somebody give me a idea about this submodule (TPM, CM).

    Chanel Management - 0CRM_CHM_CLASS_ATTR
    TPM - 0CP_UPLI_PARA
    More:
    http://help.sap.com/saphelp_nw70/helpdata/en/4a/6321849a710a4fa4a2759101ed4932/content.htm
    Regards,
    DL

  • Standard Extractor for appointment dates in CRM

    Hi guys, is there any standard extractor for the appointment dates in CRM !? Thanks you guys !

    Hi Robert, thanks for your reply but I was looking for a standard CRM-BW Extractor, I didn´t find anything so I implement CRM_BWA_MFLOW badi, set an append to the structure of the 0CRM_SRV_PROCESS_H extractor with all the date appt_types - date_from and that´s it. it works for me. Thanks !

  • Standard Extractor for Warehouse Transfer Orders

    Hello Experts.  Does anyone know if there a standard extractor for warehouse transfer orders (Tables LTAP/LTAK).
    Thank you!

    Hi Martin,
    Thank you for this information.  However, I cannot find these extractors when I execute RSA5.  Does this mean that these are not available in our version?  It seems to me that this should be available to us because our SAP Component Version is SAP EHP 1 for SAP NetWeaver 7.0 and this is what I see in the Business Content Documentation.  Are we missing something?  Thanks for your help.

  • Standard extractor for RBKP:Document Header: Invoice Receipt?

    Hi gurus,
    I need to extract from the table RBKP. Is there a standard extractor for this table? If not, what table joins would be best to create a generic extractor?
    Thanks !
    Chirayu

    Hi Chris,
    Check to see if this would be useful:
    http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/content.htm
    Hope this helps...

  • Bapi for Periodwise consumption values in MM

    HI,
    I need a bapi or funcation module for Periodwise consumption values in MM .
    Thanks,
    babu

    try this
    BAPI_MATPHYSINV_GETDETAIL
    Parameters
    PHYSINVENTORY
    FISCALYEAR
    HEAD
    ITEMS
    RETURN
    ags.

  • Standard Idoc for Goods Issue from MIGO and standard BADI to do the MIGO-GI

    Hi Gurus
    What is the standard IDoc for Goods Issue from MIGIO and standard BADI that takes care of Goods Issue from MIGO?
    Thanks

    BADI :
    MB_MIGO_ITEM_BADI
    MB_MIGO_BADI
    Idocs:
    /ISDFPS/GOODSMVT_SAPCREATE01
    /CWM/MBGMCR01

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

Maybe you are looking for