How do 'next page' in ALV
Hi friends:
For example: there are 500 lines of data in ALV itab,and I just want to display 100 lines (1-100) at one time.when the user clicked the 'next page' button,it will display the next 100 lines(101-200). does ALV have the standard Function?
thanksss
启明星
hiii
refer to following link
ALV Grid display i want to enable first page , previous page , next page
regards
twinkal.
Similar Messages
-
How to print contionus data in next page
Hi! All
I'm displaying data using classic list display.
my requirement is if my total no. of records is 10 need to display first 5 records in 1st page and the next 5 in next page along with these records i'm displaying other details which are like header details for the document. thus while printing next 5 records in next page need to print along with those hedar details .
how to print it.
Regards
Kvhiiii Kv
the complete information on printing ALVs has been given in the following ...link
go through it
http://help.sap.com/saphelp_sm32/helpdata/en/a6/6dee408a63732ae10000000a155106/content.htm -
How to have a text box expand to next page
I already got the text field to expand after i am able to type but when I go to preview the field does not flow to the next page. It hides behind the content I have on page two. How do I get the text field to push the content below it when it expands?
The main content area needs to be set to flowed.
If you want your content to push down as you enter text it needs to be a subform -
How can i get dynamic values to next page.
HI!
I am generating a dynamic rows with some different values.And in the end of each row there is a button .i want as i click that button i can get those values on next page.
Can any one help me out in this.
On click i can send values thouugh get or post to next page.But how will i read that on next page.
Help if any one can.Not excatly.But i am trying to solve that problem.Responding early may
help me. -
I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated
brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
How to give the no of lines per a page in alv report
hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh -
How doi print Any variable at the end of page in ALV report?
Hi,
Anyone can tell me that How do i print Any variable at the end of page in ALV report?
Exmale: at the ende of alv report i want to print total no of employee who has taken house loan or education loan.Hi,
Go through these links
Thread in sdn regarding FOOTER IN ALV
[ALV FOOTER;
Wiki in sdn regarding HEADER AND FOOTER IN ALV
[https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP%20Objects%20-%20ALV%20Model%20-%20Using%20Header%20and%20Footer]
Header and Footer in ALV
[http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm]
Hope this helps.
Thank you,
Pavan. -
How to Display Page Numbers in ALV Report HTML End of page Event
hai Gurus
Greetings
Please tell me how to get current page noumber and total number of pages in ALV Report (in HTML End of Page Event)
i tried with sy-pagno system field but it is not working
so please guide me
Thanks
Rameshcheck below code....
*Work area for Layout
gf_layout type slis_layout_alv,
*Work area for HEADER FOOTER
gf_header type slis_listheader,
*Work area for Field catalogue
gf_fieldcat type slis_fieldcat_alv.
it_top_page type slis_t_listheader,
*Internal table for Field catalogue
it_fcat type slis_t_fieldcat_alv.
perform:fill_layout,
prepare_header,
field_catlog,
display_report.
Form fill_layout
form fill_layout .
gf_layout-colwidth_optimize = 'X'.
endform. " fill_layout
Form field_catlog
form field_catlog .
data : lf_fcat type line of slis_t_fieldcat_alv,
l_cnt type i.
clear : lf_fcat, l_cnt.
Employee Number
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPLID'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 8.
lf_fcat-seltext_l = text-003.
append lf_fcat to it_fcat.
clear lf_fcat.
*Last Name
add 1 to l_cnt.
lf_fcat-fieldname = 'USERNAME'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-004.
append lf_fcat to it_fcat.
*First Name
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPMAIL'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-005.
append lf_fcat to it_fcat.
*Known As
clear lf_fcat.
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPSTATUS'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-006.
append lf_fcat to it_fcat.
clear lf_fcat.
*System UserID
add 1 to l_cnt.
lf_fcat-fieldname = 'COSTCENTER'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-007.
append lf_fcat to it_fcat.
clear lf_fcat.
*EMail ID
add 1 to l_cnt.
lf_fcat-fieldname = 'DEPTDESC'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 8.
lf_fcat-seltext_l = text-008.
append lf_fcat to it_fcat.
clear lf_fcat.
*Employment Status
add 1 to l_cnt.
lf_fcat-fieldname = 'LOC'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-009.
append lf_fcat to it_fcat.
clear lf_fcat.
*Personnel Area
add 1 to l_cnt.
lf_fcat-fieldname = 'TITLE'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-010.
append lf_fcat to it_fcat.
clear lf_fcat.
*Personnel Area Text
clear lf_fcat.
add 1 to l_cnt.
lf_fcat-fieldname = 'HDATE'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-011.
append lf_fcat to it_fcat.
clear lf_fcat.
*Country Grouping text
add 1 to l_cnt.
lf_fcat-fieldname = 'MGRID'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-012.
append lf_fcat to it_fcat.
clear lf_fcat.
*Cost Center
add 1 to l_cnt.
lf_fcat-fieldname = 'MGRNAME'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-013.
append lf_fcat to it_fcat.
clear lf_fcat.
*Employee Group
add 1 to l_cnt.
lf_fcat-fieldname = 'MGMAIL'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-014.
append lf_fcat to it_fcat.
clear lf_fcat.
*Organizational Unit
add 1 to l_cnt.
lf_fcat-fieldname = 'DIV'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 25.
lf_fcat-seltext_l = text-015.
append lf_fcat to it_fcat.
clear lf_fcat.
*Supervisor
add 1 to l_cnt.
lf_fcat-fieldname = 'BUSUNIT'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 25.
lf_fcat-seltext_l = text-016.
append lf_fcat to it_fcat.
clear lf_fcat.
endform. " field_catlog
Form display_report
form display_report .
data : l_repid type sy-repid.
clear l_repid.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = l_repid
is_layout = gf_layout
it_fieldcat = it_fcat
i_callback_top_of_page = 'TOP-OF-PAGE'
tables
t_outtab = it_employee
exceptions
program_error = 1
others = 2.
endform. " display_report
Form PREPARE_HEADER
form prepare_header.
data:l_header1(20),
l_header2(60).
data:l_header3(20),
l_header4(60).
l_header1 = 'Met Life Census Data'.
l_header2+40(8) = 'Run Date'.
write sy-datum to l_header2+50(10).
header
gf_header-typ = 'S'.
gf_header-key = l_header1.
gf_header-info = l_header2.
append gf_header to it_top_page.
clear gf_header.
endform. " PREPARE_HEADER
form top-of-page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = it_top_page.
endform. "TOP-OF-PAGE
*& Form end_of_list_html
output at the end of the list - not in printed output *
FORM END_OF_LIST_HTML USING END TYPE REF TO CL_DD_DOCUMENT.
DATA: LS_TEXT TYPE SDYDO_TEXT_ELEMENT,
L_GRID TYPE REF TO CL_GUI_ALV_GRID,
F(14) TYPE C VALUE 'SET_ROW_HEIGHT'.
LS_TEXT+0(20) = 'Total Employees'.
LS_TEXT+40(10) = g_count.
CALL METHOD END->ADD_TEXT
EXPORTING
TEXT = LS_TEXT
SAP_EMPHASIS = 'STRONG'.
*adds new line (start new line)
CALL METHOD END->NEW_LINE.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 10.
ENDFORM. -
How to declare top of page in alv report
hi guru
how to declare top of page in alv report
thanks
subhasisHi,
check this simple program.
REPORT ZBHALV_LIST.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_SORT = SORT[]
IT_EVENTS = EVE[]
TABLES
T_OUTTAB = ITAB .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards,
Priyanka. -
How to give no of lines per page in alv report
hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_events = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*& Form after_line_output
* Form for the After Line Output Event in the internal table
* --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno. "Defaulted value for line count
perform write_footer.
NEW-PAGE.
ENDIF.
ENDFORM. " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil. -
How i can show the selection screen input field in the top of page in alv
hi ,
how i can show the selection screen input field in the top of page in alv grid output.
tell me the processHi,
excample from my program:
FORM topof_page.
DATA: l_it_header TYPE TABLE OF slis_listheader WITH HEADER LINE,
l_info LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
if not &1 is initial.
clear l_it_header.
l_it_header-typ = 'S'.
l_key = '&1'.
translate l_key to upper case.
read table l_it_textpool with key key = l_key.
if sy-subrc = 0.
shift l_it_textpool-entry left deleting leading space.
l_it_header-key = l_it_textpool-entry .
endif.
loop at &1.
case &1-option.
when 'EQ'
or 'BT'
or 'CP'.
write &1-low to l_it_header-info.
when others.
write &1-low to l_it_header-info.
concatenate &1-option
l_it_header-info
into l_it_header-info
separated by space.
endcase.
if not &1-high is initial.
write &1-high to l_info left-justified.
concatenate l_it_header-info
l_info
into l_it_header-info
separated by space.
endif.
if &1-sign = 'E'.
concatenate ']'
l_it_header-info
into l_it_header-info.
endif.
append l_it_header.
clear: l_it_header-key,
l_it_header-info.
endloop.
endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
s_trmext,
s_trmint,
s_fkdat,
s_delno,
s_vbeln,
s_deact,
s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole -
How to change the header and footer in the Section Breaks Next Page using OpenXML?
I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I insert text in Pages so it flows to the next page?
I try copying a block of text into Pages but it cuts off at the end of the page instead of flowing to the next page. How do I fix this?
You have probably started with a Layout mode template instead of a Word Processing template. See the sidebar in the Template Chooser for which is which.
Alternatively you may have pasted an object (possibly from the Internet), not text into a Word Processing template. Click inside the object and copy the text, then delete the object and try pasting again.
Peter -
How can I forward next page, and then pop-up a download dialog box.
My require is that pop-up a download dialog box after forwarding next page.
I have read the coding in the processFormRequest of current page like below,
but I find out that it only can pop-up a download dialog box,
however, it can't forward the next page.
pageContext.setForwardURL("OA.jsp?page=/oracle/apps/xxfm/fm002/webui/TEST001PG",
null,
OAWebBeanConstants.KEEP_NO_DISPLAY_MENU_CONTEXT,
null,
null,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAException.INFORMATION);
//set default file name: [YYYYMMDDhhmm_IN.EXCEL,FILE_NAME.csv]
StringBuffer strFileName
= new StringBuffer().append((pageContext.getCurrentDBDate().toString().substring(0, 16))
.replaceAll("-","").replaceAll(" ","").replaceAll(":",""))
.append("_IN.").append(strExcelFileName).append(".csv");
//give csv file content
BlobDomain csvFileBlob = (BlobDomain)am.invokeMethod("createCsvFile");
//setenv
HttpServletResponse response
= (HttpServletResponse)pageContext.getRenderingContext().getServletResponse();
response.setContentType("application/octet-stream");
response.setHeader("Content-Disposition", "attachment; filename="+strFileName.toString());
System.out.println("fileName : "+strFileName.toString());
//download
InputStream fileIn = csvFileBlob.getBinaryStream();
long fileLen = csvFileBlob.getBufferSize();
int readBytes = 0;
int totalRead = 0;
byte blockgbyte[] = new byte[65000];
response.setContentType("application/x-msdownload");
response.setContentLength((int)fileLen);
while((long)totalRead < fileLen)
readBytes = fileIn.read(blockgbyte, 0, 65000);
totalRead += readBytes;
response.getOutputStream().write(blockgbyte, 0, readBytes);
fileIn.close();
response.getOutputStream().flush();
I don't know what's matter in the app, can you tell me how to deal with it.
Thanks in advance.Hi there,
I have a similar requirement. User will download search results in a CSV file after which I want either the page to be refreshed or to be able to goto a Confirmation page or navigate to another page.
I tried using setForwardURL / forwardImmediately / redirectImmediately methods as well as redirectToDialogPage. Since we use pageContext.setDocumentRendered(false); and response.getOutputStream().flush(); methods, the HttpResponse is already committed.
Hence, the page does not redirect to another page as Request is processed and Response is complete. In case of methods like setForwardURL A JSP forward redirects the same request object to the target URL.
Can anyone help here to achieve the expected requirement?
Thanks. -
How to move one page header details to next page lines details
Hello,
I have a requirement in custom page one field having a check box's like enable or disable and in that page one "Select" button.
Once we enable the check box and click on "Select" button it will move into the next page and display the selected rows in that page.
How to achieve this please help me in this.
Thanks&Regards,
RamaHi,
// processFormRequest()
OAMessageCheckBoxBean InventoryCheckBoxBean = (OAMessageCheckBoxBean)webBean.findChildRecursive("InventoryCheckBox");
Object InventoryCheckBoxObj = InventoryCheckBoxBean.getValue(pageContext);
String InventoryCheckBoxValue = InventoryCheckBoxObj.toString();
HashMap hm = new HashMap(1);
hm.put("myParam", InventoryCheckBoxValue );
//In the next page get the value using below
oapagecontext.getParameter("myParam")
Thanks
Sandeep
Maybe you are looking for
-
Stock on posting date -storage location and batch wise
Dear All I need to developa report exactly same as MB5B but with storage location and batch wise. We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period. I have gone through some
-
I just purchased a new MacBook Pro and was getting ready to install FCP 5 (and later upgrade to 6), but when I click on the installation icon I get this message: " You can't ope the application Final Cut Studio.mpkg because the PowerPC applications a
-
MOVED: MSI K9N6PGM2-V help :(
This topic has been moved to Overclockers & Modding Corner. https://forum-en.msi.com/index.php?topic=124600.0
-
Fact table data type changed from int to nvarchar -- rebuild on cube fails
I change one of my data types in the Fact table from INT to Nvarchar... When I look at the properties it appears correct but when I try to Process it fails still thinking it's data type INT. How can the DSV be refreshed( I did try REFRESH and it n
-
Will iPhoto store raw photos shot from a Canon or Nikon camera? Thanks.