Standard SAP Planning reports

Hi all
I have a requirement for some planning reports and I am hoping to find them in standard ECC.
Can anyone let me know if they are aware of what is available to meet the following;
Coverage reports or shorage reports at the component level
Waterfall reporting
thanks

Hi
Did you try CO09 or MD46?
Kindly revert back

Similar Messages

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

Copy of standard SAP MC1 Report

Hi All,
I copied the standard SAP MC1 report i.e. RMCB0100. In this report they show the data according to month for that they have select option o selection screen i.e. MONTH I want the report according to period. for that I replace the moth by period but still I ma getting the data according to month. In our organization fiscal year is start from April. and current fiscal year is 2008.
So where I need to change in standard report.
Thanks

Hello Atish,
It's copy of standard program in this for getting period field on selection screen I have to pass the period table only after that it's it replace the month by period and take care of all select quries.
In standard program they are passing the table S039 which is taken from TMC4 table and it's table for month. Now I am passing Period table i.e S001 from TMC4 only.
Thanx.

Difference between standard SAP asset report and BW report

Hi
We are finding differences between the standard Asset report and the BW report which is extracted via standard SAP extractor. Could anyone guess what would be the reason for this?? I ran the report - AW01N
Please revert at once as this is very urgent.
Regards,
prasad

Hi Prasad,
A number of reasons could be responsible for this. Check the following:
1. If some posting were done in R/3 just before running your BW report, you may have to re-extract the data into BW as this would no longer be current. The thumb rule is to always allow at least <b>45</b> minutes to <b>1</b> hour between when the last transaction in R/3 was posted before re-extraction. This is to allow SAP Logical Unit of Work(LUW) to have been committed to the R/3 database.
2. There may have been some restrictions on the selection variables in the BW query. Check the Query Designer, just to be sure there are no restrictions.
I hope the above help.
Do not forget to award the points please.
Regards,
Jacob

Standard SAP Cost Report which captures costs incurred for replacementgoods

Hi Friends,
We want to track the costs related to the Replacement of goods sold free of charge and under warranty shipped to our customers. We are currently using the field "Usage" on the item level of the sales order.The item category created within the Sales Order is either ZST0 or ZMO0.
Unfortunately, I can't find any report in which the field "Usage" would be presented along the costs related to the item. The report I'm looking for would be used to evaluate, on a given period of time (ex. Fiscal Year or a month), the total costs associated to the replacement units by sales order item.
1) An existing report (which I have not found) exists, please let me know which one
2) There is another way to track such costs within SAP.
Please let me know if there is a standard report which tracks costs related to replacement goods.

Hi,
I got the required from MBEWH table.
Thanks
Aravind

Standard SAP PM reports

dear all,
does standard reports contain any reports related to counter (reading/difference etc)?
where i can find PM Standard reports and how they are executed ?
please give useful link if there is any,
Thanks and regards
Edited by: Pravin on Nov 20, 2008 11:20 AM

Hi Pravin,
Type "SAP1" in the command field (where we types the t Codes). It will filter all other transaction codes from all the nodes and will give you only the Report for each node.
Hope it will help you.
Regards,
Shyamal

Standard SAP HR report to give output on change in fields values

Hi
Is there any starndard report in sap hr which will give output on changes on the infotype fileds for given two dates.

Hi,
Use FM HR_INFOTYPE_LOG_GET_DETAIL .
Regards,
Srini.

Generating standard SAP report

Hello experts
I am trying to generate standard SAP 8D report using action box (Request 8D report).I am using Std SAP notif type F2.
I am able to fill section 1 and 2 (1.Reference 2.Defect description).
I am unable to fill section 3-8 . I looked at the thread where there are some comments about SORT sequence number. I have done that by double clicking on defect item (catalog type 9). I beleive I have missed somethings.
Appreciate if somebody could advise me step by step to fill sections 3 to 8 in 8D report.
Many Thanks
Gaurav

Resolved

Graphical representation of standard SAP reports

Hi,
Can we get graphical representation of Standard SAP CO Reports? Is there any setting that has to be activated to get these? We are using FI, CO & MM.
Regards,
Sangeeta

Dear Sangeeta,
This refered report is prepared through report painter. Transaction code GRR1-2-3. Graphical representation facility is available only in drilldown reporting which was used in FI module but not in CO.e.g. to see & modify GL related repots transaction code is FSI2.Where in you can go to output type tab & you will find the option.
As your query is relating to CO you can try transaction code GR11where you design the layout for report painter reports.This might help you.
Else if your requirement is such that you want each details through graphycal representation you can use report interface which will direct to graphycaly represented report.
Regards,
Abhijit

Enquiry on standard SAP MM LIS Report

Hi,
I would like to know whether is there any standard SAP MM report that can be used to display all completed/closed LIV for vendors, based on date ranges?
I have tried to use MCE3 or MC$4 but vendors with no LIV made are also shown.
I only need to display those vendors with closed IR, say for 1 year.
Appreciate if any expert can advise, thanks

Hi Prabu,
My system said MIR5 does not exist. Is there any other program to view closed LIV for PO?
thanks

What are the standard SAP reports in PP ?

Hi PP Guru's,
Please explain me the standard Reports available in PP with Tcode and give me
how to configure for the customer requirements incase if demanded by them a
change is reqd? pl give few of them
Thanx & regards,
Vimalbalaji

MATERIAL
CREATE-GENERAL       MM01       IMMEDIETELY
                     MM11       SCHEDULE
CHANGE               MM02       IMMEDIETELY
                     MM12       SCHEDULE
                     MM13       ACTIVATE
FLAG FOR DELETION    MM06       IMMEDIETELY
                     MM16       SCHEDULE
DISPLAY              MM03       DISPLAY CURRENT
                     MM19       DISPLAY AT KEY DATE
DISPLAY CHANGES      MM04       ACTIVE CHANGES
                     MM14       SCHEDULE CHANGES
                     MM17       MASS MAINTENANCE
                     MMAM       CHANGE MATERIAL TYPE
OTHER                MMBE       STOCK OVERVIEW
                     MMPV       CLOSE PERIOD
                     MMRV       ALLOW POSTING TO
                                PREVIOUS PERIOD
                     MM50       INSTANT MATERIAL VIEW
                     MMSC       ENTER STORAGE LOCATIONS
                     MM60       MATERIAL LIST
ARCHIVING(MATERIAL) MM71       ARCHIVE/DELETE
                     MM72       DISPLAY ARCHIVE
BILL OF MATERIAL (MATERIAL BOM)
                     CS01       CREATE
                     CS02       CHANGE
                     CS03       DISPLAY
EXTRAS               CS28       ARCHIVING
                     CS20       MASS CHANGES
EVALUATION/BOM       CS11       BOM MULTILEVEL
EXPLOSION/MATERIAL   CS12       STRUCTURE MULTILEVEL
BOM                  CS13       SUMMURISED BOM
WORK CENTRES
                     CR01       CREATE
                     CR02       CHANGE
                     CR03       DISPLAY
                     CA85       REPLACE
CAPACITY             CR11       CREATE
                     CR12       CHANGE
                     CR13       DISPLAY
HIERARCHY            CR21       CREATE
                     CR22       CHANGE
                     CR23       DISPLAY
LINE HIERARCHY       LDB1       CREATE
                     LDB2       CHANGE
                     LDB3       DISPLAY
REPORTING            CR60       W/C INFORMATION SYSTEM
                     CR05       W/C LIST
                     CR06       COST CENTRE ASSIGNMENT
                     CR07       W/C CAPACITIES
                     CR08       W/C HIERARCHY
WHERE USED           CA80       WORK CENTRE
                     CR15       CAPACITY
                     CR10       CHANGE DOCUMENTS
EXTRAS               CR09       STD. TEXTS TASK LIST
                     CR41       ARCHIVING
ROUTING
STAD. ROUTING        CA01       CREATE
                     CA02       CHANGE
                     CA03       DISPLAY
REF. OPERATION SETS CA11       CREATE
                     CA12       CHANGE
                     CA13       DISPLAY
RATE ROUTING         CA21       CREATE
                     CA22       CHANGE
                     CA23       DISPLAY
REF. RATE ROUTING    CA31       CREATE
                     CA32       CHANGE
                     CA33       DISPLAY
EXTRAS               CA85       REPLACE W/C
MASS CHANGES         CA95       REPLACE REF. OP. SET
                     CA75       REPLACE PRT
DELETE TASK LIST     CA99       WITH ARCHIVING
                     CA98       W/O ARCHIVING
REPORTING            CA80       WORK CENTRE
WHERE USED LIST      CA90       REF. OP. SETS
                     CA70       PRODUCTION RESORCE TOOLS
COST CENTRE
                     OKKP       MAINTAIN CONTROLLING AREA
                     KS01       CREATE COST CENTRE
                     KZS2       CREATE COSTING SHEET
                     KA01       CREATE PRI. COST ELEMENT
                     KA06       CREATE SEC. COST ELEMENT
                     KL01       CREATE ACTIVITY TYPE
                     KP26       ACTIVITY TYPE/PRICE PLANNING
SALES AND OPERATIONS PLANNING
PRODUCT GROUP        MC84       CREATE
                     MC86       CHANGE
                     MC85       DISPLAY
GRAPHIC              MC91       PRODUCT GROUP
                     MC92       OVERVIEW
PLANNING             MC81       CREATE
FOR PRODUCT GROUP    MC82       CHANGE
                     MC83       DISPLAY
                     MC75       TRANSFER PG TO PLANNING
FOR MATERIAL         MC87       CREATE
                     MC88       CHANGE
                     MC89       DISPLAY
                     MC74       TRANSFER MATERIALS TO DM
                     MC9K       MATERIAL AVAILABILITY
VERSION MANAGEMENT   MC78       COPY
                     MC80       DELETE
FLEXIBLE PLANNING    MC93       CREATE
PLANNING             MC94       CHANGE
                     MC95       DISPLAY
                     MC9K       MATERIAL AVAILABILITY
TOOLS/PLANNING TYPE MC8A       CREATE
MACRO                MC8B       CHANGE
                     MC8C       DISPLAY
EVENT                MC64       CREATE
                     MC65       CHANGE
                     MC66       DISPLAY
ROUGH CUT PLANNING   MC35       CREATE
PROFILE              MC36       CHANGE
                     MC37       DISPLAY
ENVIRONMENT          MC90       TRANSFER MATERIALS TO DM
ACTIVITY REQT.       KSPP       TRANSFER TO COST CENTRE
                     KSBL       COST CENTRE OLANNING REPORT
                     KSOP       TRANSFER TO ACTIVITY BASED COSTING
                     CPBL       PLANNING REPORT PROCESSES
                     MC9C       REPORTING
SETTINGS             MC96       FORECAST PROFILE
DISSAGGRIGATION      MC76       BREAKDOWN PG PLAN
                     MC77       DISPLAY PG PLAN
                     MC75       TRANSFER PG TO PLANNING
                     MC74       TRANSFER MATERIALS TO DM
FORECASTING
INDIVIDUAL FORECAST MP30       EXECUTE
                     MP31       CHANGE
                     MP32       DISPLAY
TOTAL FORECAST       MP38       EXECUTE
                     MP33       REPROCESS
                     MP39       PRINT
                     MPBT       EXECUTE BACKGROUND
                     MPDR       PRINT BACKGROUND
DEMAND MANAGEMENT
PIR                  MD61       CREATE
                     MD62       CHANGE
                     MD63       DISPLAY
                     MD65       REQTS. FOR SCINARIO
                     MD66       COPY SIMULATED DEPENDENT REQT.
                     MD70       COPY TOTAL FORE CAST
EVALUATION           MD73       DISPLAY TOTAL REQT.
                     MD79       EXCELL INTERFACE
                     MD4C       ORDER REPORT
                     MD72       CHARECTERISTICS PLANNING
CUSTOMER REQT.       MD81       CREATE
                     MD82       CHANGE
                     MD83       DISPLAY
REPETITIVE MANUFACTURING
MASTER DATA          C223       PRODUCTION VERTION
PRODUCT COST PLANNING
COSTING RUN          CKMATSEL   CREATE
SELECTION LIST       CKMATCON   Edit
                     CK40N      EDIT COSTING RUN
Check with below Link :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/process%2border%2bstatus%2bmanagement
Thanks
Seshu

Standard SAP Report - Payments blocked and released

Hi Experts,
We are having a requirement where the payment will be blocked for the invoices generated through Invoicing Plan.
But we need a report " To know the status of payments blocked and released according to the invoicing plan". Do we have any standard SAP report on this requirement?
By
Prabhu

Hi,
Use t.code: FBL1N , enter company code & select document type "KZ" in dynamic selection
and then select & execute for....
1.Open Items in status segment for not paid to vendor
2.Cleared Items in status segment for paid to vendor
Regards,
Biju K

Is there any Standard SAP Report?for displaying Billing block/Status-Order

Hi,
Am a ABAP Developer. I heard that there is SAP Query/ABAP Query/Standard SAP report for the below functionality/requirement. SO, pls. let me know if there is any SAP Query/ABAP Query/Standard SAP report?
"This report is suppose to display Credit and Debit memo documents which are blocked and yet has a status of APRV; the other display is for Return Documents which are blocked and yet has a status RCVD."
thanq

Hi,
Use t-code
V23 - Blocked sales document for billing
VA14L - Sales document blocked for delivery
VFX3 - For blocked billing documents.
Kapil
Edited by: Kapildev Farakte on Jan 8, 2010 4:15 AM

Some Line Items are missing in Standard SAP FI/CO Reports

Dear All,
while taking printout of SAP Standard FI/CO Reports some line items and total value are missing. E.g using TCODE FBL3N, it shows correct value after inserting selction inputs but when displaying it in spool request or taking print out it misses some line items and total value.
Kindly help me in resolving the issue.
Regards,
Majid Khan

Problem was caused by support pack SAPKB62063 and SAPKB62064.
Apply OSS note 1100728 which was corrected in SAPKB62065.
Giana

Standard SAP report for purchase price variance

Hi All,
I need to know if there is a standard SAP report that shows the purchase price variance.
Thanks,
Regards

Hi Ritika,
There is no standard report available to compare purchase order price cost and standard cost of a material.
You can check if FBL3N helps to resolve your purpose or not. Or else you have to make a customized report with the help of ABAP'er on the informations based on the following tables.
MBEW
        EKKO
        EKPO
        EKBE
       MKPF
        MSEG
        KEKO
        KEPH,
        BKPF
        BSEG
        LFA1
Thanks,
Vasanthan

Standard SAP Planning reports

Similar Messages

Maybe you are looking for