Standard webtemplate with chart

Hi all,
I work with SAP BW 3.0B. I made a copy of the standard webtemplate 0QUERY_TEMPLATE with report "RS_TEMPLATE_MAINTAIN". I tried to change the template with the web application designer but I got an error message while open the file. the system validates and gives me an error message "ITEM_ID for library item or "ITEM_CLASS" parameter for standard item is missing or broken!" The same message appears when I try to open the standard template 0QUERY_TEMPLATE.
The message belongs to the coding for the chart.
When I delete that segment, I can change the template but I don't get a chart then, when using that template.
Thanks a lot for your help
Adi

Try the following code for the chart item.
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="GR2Chart"/>
         <param name="ITEM_ID" value="0ADHOC_COLUMN_CHART"/>
         <param name="DATA_PROVIDER" value="DP"/>
         <param name="HIDDEN" value="X"/>
         ITEM:            GR2Chart
</object>
Thanks.

Similar Messages

Modifications required standard webtemplates

Hi
we are uisng standard web templates 0analysis_pattern
my report out required
standard web template under that i want use report output with some key figure at report header
so final output is
standard web temaplet ( like export excel, infromation)
then report header like ( what ever i need key figures, variables values at header)
then my report output
please let me know what process required

Hi Suneel
First of all My suggestion is What ever the Standard Webtemplate 0analysis_patteren u r using , If you modifications in that , Please make a Copy of the webtempleate and what ever the changes you want to made make it and save it with Z name and use the Z webtemplate to solve your requiremnt like adding keyfigures in Header like export excel and all .
If Further any Clarrification you nee please let me know i can help you out.
Regards
Satish

Enhance standard class with event handler method

In trying to enhance a standard class with a new event handler class, I find that the ECC 6.0 EHP4 system does not appear to recognise the fact the method is an event handler method. The specific example is a new method to handle the event CL_GUI_ALV_GRID->USER_COMMAND.
I notice that the flag called Active has not been ticked - see image below. Perhaps this is the reason why the event handler is not being triggered.
Note that there is an event handler for the same event in the standard class which obviously is executed as expected. Any ideas on limitations in the system or I am missing a step?
Thanks
John

Thank you for your replies.
There is a bug in the ALV handler of a standard SAP class (when executed in ITS WebGUI) and I was hoping to create a custom event handler as an Enhancement to execute some custom code to sort of "handle the bug".
I agree - ideally it should be done in a Z class but that will not give me access to the object methods and attributes of the enhanced class.
Cheers,
John

Standard Report with IDOC Number and PR number

Hi
My client need the Standard report with the combination fields of " Purchasing Number , Requirements tracking number in PR,
IDOC number , IDOC Processing status. "
(Our PR will generates through IDOC from other system via XI interface)

Hi Nagendra,
for Purchasing Number , Requirements tracking number in PR you can use -ME5A
Purchasing Number-EBAN-BANFN
Tracking number goto- MELB.
table name-EKPO
for IDOC number , IDOC Processing status -we09
For IDOC number -EDID4-DOCNUM
IDOC Processing status-EDIDC-STATUS
Regards,
Krishna.
Edited by: kris_hna on Sep 8, 2011 1:14 PM
Edited by: kris_hna on Sep 8, 2011 1:19 PM

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Copy standard cost with Cost Component from another material

Hi,
I need to copy standard cost from another material not only total price but also details of cost component split. I try to used transaction CKUC with procedure of "explode material cost estimate" but the reference material use "mixed costing" and isystem stop explosion.
There is another procedure in order to make this copy? I can not use special procurement because are different codes (material A / Plant XXX copy froma material B /Plant XXX).
Thanks for your support.
Mic

Hi Chandra,
thanks for your suggestion, it works but only if I explode a level ... material "B" contains two mix codes that also contain their mixes. So system shows this message "Mixed cost estimate explosion in level 2 for material xxx" and "Mixed cost estimate exists: maximum of 2 explosion level (s) possible".
So Is not possible to copy and esploded a standard cost with multi level mix?
Thanks
Michela

How to search records in a standard table with * ?

Hi everyone,
Can anyone tell me how to search records in a standard table with * ?
That is, in screen if user type * abc * for searching the records in which the field MC_STEXT contains 'abc'. What the code should be? How to complete the code below?
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT = ? .
Thanks!

Hi
There are several way to do that, probably just as some guys wrote the easier way is to use LIKE in WHERE condition and the sign % instead of *:
V_STRING = '%ABC%'.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT LIKE V_STRING.
U can also use a range (just like select-options):
RANGES: R_MC FOR P1000-MC_STEXT.
R_MC-LOW = 'ABC'.
R_MC(3) = 'ICP'.
APPEND R_MC.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT IN R_MC.
Max

Will Adobe Acrobat 8.0 Standard Work With Adobe Reader 8.2.4?

Hello,
I have a question, but haven't found an answer to this yet.
Can anyone tell me please: Will Adobe Acrobat 8.0 Standard work with Adobe Reader 8.2.4?
I had Adobe Acrobat 6.0 Standard on my computer & it was working with Adobe Reader 8, but don't remember what the version it was.
I was using Adobe Acrobat 6.0 Standard to scan very old family pictures & documents & I realize that this version of Acrobat is outdated.
To make a long story short, my computer had crashed, so we built another computer & just replaced the hard drive. When I went to Adobe, I had to download the newer version of Reader 9.0 & it didn't work with Acrobat 6.0., so I removed Adobe Reader 9 & I found Adobe Reader 8.0 & have downloaded the patches, so now I have Adobe Reader 8.2.4 back on board.
Thank you.

Adobe doesn't recommend any version of Reader with any version of Acrobat on Windows. It will cause problems. It just is a matter of how and when. The problem has to do with shared resources causing conflicts. If you have Acrobat 8, you can update it to Acrobat 8.2.4. You must apply the updates sequentially.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

Problem With Chart (Members Name)

Hi Experts
We are facing the one new issue in FR as well as HFM. we are using the data bast to HFR is HFM.While we are creating the HFM application Profile we used the Period's Lables as January ,febuary.....,.we catching the same in HFR also it good.
But at one stage (trend reports) we have to generate the reports including with charts and both (*grid and Chart should be in one page only*). here we are facing the problem the report made up two col's (year & Period) and one row(Scenario).If we check the chart to show the Horizontal value like January 2007,February2007 and so on . so that the system will covers morespce and grid will moves next page but we need both in one single page.
Any suggestions on this Its cery Urgent
Regards
Rao

There are several options:
Try formatting that axis to have the month names at an angle.
Use the member name instead of description for months.
Don't show the year.
Change the axis that months are on, or pivot the grid (rows to columns).

How to enhance the standard search with custom field?

Hi all,
I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
I'm actually a bit confused to understand the correct procedure.
Can someone please help me with a generic procedure to enhance the standard search with a custom field?
Thanks in advance.

Hi Maren,
Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
Add new field using Append structure of type ‘XXX’ in search
Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
Put your logic in BADI implementation – SEARCH method
Add it in WebUI configuration
Remove the operator if required
Regards,
Swadini Sujanaranjan

HT1338 For whatever reason, I can't use (mac) mail on G5 with Charter. Would like to try Thunderbird (TB) -now using Firefox 3.6.28. But can't navigate through Mozilla to find older versions of TB. Other alternatives

For whatever reason, I can't use (mac) mail 3.6 on my mac G5 with Charter ISP. I would like to try Thunderbird (TB) - I'm now using Firefox 3.6.28. But I can't navigate through Mozilla to find older versions of TB. Can you suggest a URL for down loading older versions of TB, or, other alternative email programs?

I have recently moved from Thunderbird to SeaMonkey - much better and up to date with the latest Mozilla code.
See my SeaMonkey page at: http://links.zero.eu.org/seamonkey/
For PPC - download the latest SeaMonkey-ppc from:
https://code.google.com/p/seamonkey-ppc/downloads/list
For Intel - download normal SeaMonkey from:
http://www.seamonkey-project.org/releases/
Old versions of Thunderbird can be found here:
ftp://archive.mozilla.org/pub/mozilla.org/thunderbird/releases/
The latest Thunderbird for PPC is 3.1.20.

Report with chart in 11g fails

Iam building an RTF template in Word with chart and some data. The chart is inside a group. Everything works fine from BIP desktop. When i upload the template into 11g and run the report, I get 'File does not begin with '%PDF-%' error. When i remove the chart, the report works fine in 11g. Has any one faced a similar issue? Can someone help me with this error.
Thanks in advance.

Check to see if the solution offered in the following post might help you (look for "Fixing an error received on PDF generation" section):
http://www.oracleappsblog.com/index.php/weblog/printing-reports-pdf-format-oracle-applications/
Thanks,
Bipuser

How to call standard report with in zprogram?

Hi Sap experts,
How to call standard report with in zprogram.
For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
Regards,
Sujan

>
sujan T wrote:
> Thanks for your reply.
>
> What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
>
> Regards,
> Sujan
no special logic is required
If u want to use
RPUAUDOO IN THE ZREPORT.
Put the submit button where ever required
ex: In zreport after certain process reacedu want to call then use
submit rpuaudoo and return.
Regards
Sas

Error with chart series

Hi everyone!
I have a problem with charts with multiple series.
If the series are incomplete (with lacks of data for some columns), the values lose the right correspondence with the column.
How can I deal with this?
Thank so...
DrPlexi
Maybe an example would be clarifying, i attach here the xml data and two charts' xml:
<ROWSET>
<ROW>
<series>5</series>
<col_names>300C</col_names>
<values>71.91701276542868</values>
</ROW>
<ROW>
<series>3</series>
<col_names>300C</col_names>
<values>20.48012540803013</values>
</ROW>
<ROW>
<series>Wagon</series>
<col_names>300C</col_names>
<values>7.600472191820757</values>
</ROW>
<ROW>
<series>2</series>
<col_names>300C</col_names>
<values>0.0023896347204366342</values>
</ROW>
<ROW>
<series>5</series>
<col_names>DODGE</col_names>
<values>65.13503987886224</values>
</ROW>
<ROW>
<series>Wagon</series>
<col_names>DODGE</col_names>
<values>15.728327698513192</values>
</ROW>
<ROW>
<series>2</series>
<col_names>DODGE</col_names>
<values>14.781938987298812</values>
</ROW>
<ROW>
<series>3</series>
<col_names>DODGE</col_names>
<values>4.354693435325753</values>
</ROW>
<ROW>
<series>5</series>
<col_names>HUMMER</col_names>
<values>43.14889344162732</values>
</ROW>
<ROW>
<series>Wagon</series>
<col_names>HUMMER</col_names>
<values>27.14205893546898</values>
</ROW>
<ROW>
<series>2</series>
<col_names>HUMMER</col_names>
<values>13.45361200411366</values>
</ROW>
<ROW>
<series>3</series>
<col_names>HUMMER</col_names>
<values>8.480779975868687</values>
</ROW>
<ROW>
<series>4</series>
<col_names>HUMMER</col_names>
<values>7.7746556429213465</values>
</ROW>
<ROW>
<series>5</series>
<col_names>CHEVY</col_names>
<values>74.89464972938943</values>
</ROW>
<ROW>
<series>3</series>
<col_names>CHEVY</col_names>
<values>25.105350270610575</values>
</ROW>
<ROW>
<series>3</series>
<col_names>CADILLAC</col_names>
<values>39.497342869700724</values>
</ROW>
<ROW>
<series>5</series>
<col_names>CADILLAC</col_names>
<values>64.38519904375845</values>
</ROW>
<ROW>
<series>Wagon</series>
<col_names>JEEP</col_names>
<values>60.66246011233522</values>
</ROW>
<ROW>
<series>5</series>
<col_names>JEEP</col_names>
<values>39.33753988766478</values>
</ROW>
</ROWSET>
And here's the xml of two charts (both showing wrong results):
chart:
<Graph graphType="LINE_VERT_ABS">
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'col_names'))}" rowCount="{count(xdoxslt:group(.//ROW, 'series'))}">
<RowLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="series">
<Label>
<xsl:value-of select="current-group()/series"/>
</Label>
</xsl:for-each-group>
</RowLabels>
<ColLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="col_names">
<Label>
<xsl:value-of select="current-group()/col_names"/>
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="series">
<RowData>
<xsl:for-each-group select="current-group()" group-by="col_names">
<Cell>
<xsl:value-of select="sum(current-group()/values)"/>
</Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
</LocalGridData>
</Graph>
chart:
<Graph type="BAR_VERT_PERCENT">
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'col_names'))}" rowCount="{count(xdoxslt:group(.//ROW, 'series'))}">
<RowLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="series">
<Label>
<xsl:value-of select="current-group()/series"/>
</Label>
</xsl:for-each-group>
</RowLabels>
<ColLabels>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="col_names">
<Label>
<xsl:value-of select="current-group()/col_names"/>
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select=".//ROW" group-by="series">
<RowData>
<xsl:for-each-group select="current-group()" group-by="col_names">
<Cell>
<xsl:value-of select="sum(current-group()/values)"/>
</Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
</LocalGridData>
</Graph>

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Standard Text with ' include' option doesn't work with order created by FM

Hi ABAPers,
Standard text with 'Include' Option does not work with all the Order created via the Function Module SD_ORDER_CREATE_WWW. Where as Order created via VA01 display the Standard text with 'Include'.
On my analysis I found that, Order created via FM use the '*' 'Comment' instead of ':/' 'Command' in the script editor. So the Standard text inserted was considered as a Text instead of command.
Hence issuing print or print preview, the Script display the INCLUDE statement instead of the text.
Can you please let me know the reason and the way to rectify it.
Thanks & Regards
N.Suresh Kumar

Hi.
Make that * command as /: and try in ur program..
It works..
Hope it helps...
Cheers,
Simha.

Standard webtemplate with chart

Similar Messages

Maybe you are looking for