Standby creation with BCV copy

Hi,
I have a requirenment to create a standby database from a BCV copy.
1. I will be getting 1st database which is copy from the BCV on 1st machine.
2. I will be getting 2nd database which is also a same copy from BCV backup on 2nd machine.
3. My task is to create a standby database i.e. 2nd database(2nd machine) from 1st database(1st machine)
4. I dont have BCV copies but to create such kind of standby database I need any proper document.
If someone having such kind of document, stpes then please provide me.
Thanks a lot in advance

Hi,
Refer this blog
http://community.dbapool.com/articlelist.php?articles=043005
Thanks,
Ajay More
http://moreajays.blogspot.com

Similar Messages

Standby creation with rac

My system is solaris 10, Oracle database v. 10g.
I'm creating a physical standby database on a remote host.
As there is 2 different sequence number for the 2 thread in the RAC,
select max(sequence#) from gv$archived_log;
thread1 = 76
thread2 = 433
what is the sequence number I have to user for the recover operation.
Thanks for your help
Fabrice

Better than the sequence numbers are the SCNs, check first_change# and next_change# (also in v$archived_log).
Werner

Physical Standby Database Creation with RMAN

Hi,
I'm in 10g on Linux. I want to create a standby database on another Linux server. I did not find a clear procedure to create it in Oracle® Database Backup and Recovery Advanced User's Guide 10g Release 2 (10.2) Part Number B14191-02
and niether in Oracle® Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-04
In the last one chapter 3 sends you to F appendix and F appendix says do nothing before having than all in chapter 3 :
In F.1.1 page F-2 it is said :
See Chapter 3 for a complete discussion of physical standby database preparation,including initialization parameter settings. You must perform all necessary preparation tasks described in these chapters before RMAN can successfully create the standby database files and mount the standby database.
Any way I'm looking for a procedure or clear article to create it.
Many thanks before.

Physical Standby Database Creation with RMAN
Use the DUPLICATE command.
Check out this metalink doc: Note:374069.1 and Note:118409.1
Message was edited by:
STW
Message was edited by:
STW

SQL exception during creation of a physical standby database with EM

Version: EM Oracle 10.2.5 (agents running, repository running, primary db running, all targets visible and reachable with EM)
I try to create a physical standby database with the enterprise manager and each time the process is aborted with a SQL exception during the preparation of the job by the EM. I have added a part of the OMs log containing the error at the end of the excerpt.
=============
2010-04-29 16:00:39,856 [EMUI_16_00_39_/console/targets] WARN pref.SubtabPref getFolders.710 - Unknown folder id: VirtualServers retrieved from repository
2010-04-29 16:01:04,765 [EMUI_16_01_04_/console/database/dataguard/create] ERROR em.dataguard validate.1329 - CreateBean: ClassNotFoundException: null
2010-04-29 16:02:05,476 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone checkSetFileError.79 - DatabaseFileAttributes.checkSetFileError(): Null database file!
2010-04-29 16:02:05,476 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone setControlfiles.160 - DatabaseFileAttributes.setDatafiles(): Invalid control file!
2010-04-29 16:02:05,492 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone getControlFileNames.616 - DatabaseFileAttributes.getDatafileNames(): null datafile names!
2010-04-29 16:02:32,823 [Thread-28] ERROR em.jobs remoteOp.2389 - DBVerify.remoteOp(): Error: max_stamp# 6071384
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitJobPreparation.3297 - DBCloneObject.submitJobPreparation(): getMaxLogSequenceNum: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitJobPreparation.3501 - DBCloneObject.submitJobPreparation(): Exception: java.lang.Exception: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitDBCloneJob.3716 - DBCloneObject.submitDBCloneJob(): Exception: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:37,496 [EMUI_16_02_37_/console/database/dataguard/create] ERROR em.dataguard onEvent.1243 - CreateConfigController: Exception: oracle.sysman.db.dg.util.VxxStandbyException: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
=========
I have set the agent perl script tracing to DEBUG, but can't find any reason, why the job preparation failed.
Has anyone an idea why the job cannot be prepared? Thanks in advance for investigation :-)

Can you please tell me how can i see data gaurd on EM..
I have oracle 11gR1..i have implemmented primary as well standby database..
I have already started EM but i have no idea where to find datagaurd option..or how to create standdby db using EM..
You got error that means u did it using EM..how can i do it on EM

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

Po Creation With Reference to contract

Dear Experts
We are creating the purchase order with reference to contract the contract quantity not copied to po. it is asking to enter the qty. but it should copy the contract quantity. the same contract price also not copied to po. it is copying from the info record price.
my scenario is at the time of po creation with reference to contract it should copy the contract qty and price any copy control assignment is there or any other settings required.
Please help
Regards
Anand

Hi,
If a contract with one of your principal vendors exists for a material, you can create purchase orders referencing this contract. Purchase orders created in this way are called contract release orders.
The price, vendor data, terms of payment, delivery costs, and any instructions to the vendor are adopted from the contract automatically.
If you have created the contract & info records is also exists then system will give priority to contract to determine the conditions.
Please check the source list ,whether contract is maintained over there or not.
Thanks,
AMIT

Logical Standby Database with 10g+ASM on both sides??

Hi out there,
is there a known way to establish a logical standby database on 10g, if both
sides are running with an ASM setup?
I've tried to create one out of a physical standby database (which is set up
and running w/o any problems), like a book suggested me to do.
The procedure was:
1. switch on supplemental logging
2. prepare initiation parameters (for archive logging etc.) on both sides for
logical stb.
3. shut down the phyiscal standby
4. alter database create logical standby controlfile as '<path>'; on the
primary, transfer the controlfile to the standby db. Here I had to use RMAN
to copy the controlfile into the ASM System, and modify the initfile/spfile
in order to use the controlfile. No problem so far.
5. mount the standby database, alter database recover managed standby database
disconnect; -> At this point, the alert log complained about non-available
datafiles.
6. alter database activate standby database; --> fails ("needs recovery") due
to last point.
The trouble is, the controlfile created at point 4 cointains wrong paths to
the datafiles. Since I can not have the same disk group name on the standby
system, and since ASM renames the stored datafiles by its own, the complaints
of point 5 are comprehensible, but nevertheless annoying.
I tried to backup a controlfile to trace and change the paths, but at after
mounting the standby with this controlfile and proceeding at point 5, the
system says "<path> is not a standby controlfile"
Is there a different way of creating a "Logical Standby Database with 10g+ASM
on both sides"? Metalink said nothing about LogStby and ASM.
Best regards and thanks in advance,
Martin

I'm not sure if this will work but try:
1. create trace control file (you did it)
2. change paths (you did it)
3. recrate control file (you did it)
... there was error occured during mount before
so mount database (not as standby)
4. create standby control file (from recreated control file)
5. shutdown instance, replace control file with new standby control file or replace the control filename in parameter file.
6. mount as standby
What happend?
Update: Tested on my side and it has worked fine... How about you?
Message was edited by:
Ivan Kartik

Purchase order creation with reference to Contract

Dear All
Purchase order creation with reference to quantity contract the contract quantity is not copied in to po. any configuration copying rules required. please guide
Regards
Anand.

Hi Buddy
The correct business process is RV Preq created by a user from any department then buyer converts this Preq to a MK contract with some quantity keeping the duration as some months/year. Then as and when material mentioned in the contract is required during the validity period of the contract MRP creates Preq or buyer manually creates NB preqs , same are then converted to PO but these PO are released against MK contract. So qty in PO are different then mentioned in contract because contract is for a large qty keeping in mind the duration (for example one year).
Regrds
Yogesh

Standby Database with Standard Edition

Hi All,
I'm attempting to setup a Standby database with Oracle 10g Standard Edition. I must manually copy over the archive logs to my Standby database server because i'm using Standard Edition.
Once my primary database archive logs have been copied over to the standby location shouldn't the database automatically apply those archive logs? I have issued the "alter database recover managed standby database disconnect from session" so my understanding is that it is in recovery mode and shoudl be finding the archive logs to apply. Can anyone confirm that this configuration should work with Standard Edition and perhaps point me in the right direction, which parameters in the init file to check, to get my standby database to apply these archive logs automatically.
Thanks,

To quickly determine the level of synchronization for the standby database, issue the following query on the physical standby database:
SQL> SELECT ARCHIVED_THREAD#, ARCHIVED_SEQ#, APPLIED_THREAD#, APPLIED_SEQ#
2> FROM V$ARCHIVE_DEST_STATUS;
ARCHIVED_THREAD# ARCHIVED_SEQ# APPLIED_THREAD# APPLIED_SEQ#
1 947 1 945

Virtual desktop template creation with UR1 - two issues

There are two new issues affecting Virtual Desktop template creation with WMS 2012 with UR1.
Issue #1: Some systems fail to create a new or customized virtual desktop template with UR1 applied. UR1 includes an updated MultiPoint Connector which is compatible with a UR1 host. The Connector gets included in the Virtual Desktop template
so that the virtual desktops can be managed by MultiPoint Dashboard. On some systems installation of the UR1 Connector will require a reboot that takes too long to complete and template creation will timeout.
If you try to create a template without doing the following update to the unattend-t.xml file, and if the Connector reboot takes too long, the template creation process will never complete, appearing stuck at 80% until the timeout. If you check the running
Virtual Machine Connection, you will see an error message that Windows could not complete the installation.
To correct this:
From MultiPoint Manager or Hyper-V Manager, shutdown the running template VM.
Delete the template .vhd stored in Public Documents\Hyper-V\Virtual hard disks
3. a) Make a backup copy of
C:\Program Files\Windows MultiPoint Server\Unattend-t.xml
e.g. rename it .bak
b) open
C:\Program Files\Windows MultiPoint Server\Unattend-t.xml in your favorite text editor.
b) find “connector” in the file
c) replace this string (starts with <Path> and ends with </Path>)
<Path>powershell -Command "try { $process = Start-Process -FilePath '%Windir%\Temp\Connector\WmsConnector.Exe' -ArgumentList '/Quiet' -PassThru -Wait; } catch { throw 'WmsConnector
Install Failed'}; exit $process.ExitCode"</Path>
with this string
<Path>powershell -Command "try {
$p = Start-Process -FilePath '%Windir%\Temp\Connector\WmsConnector.Exe' -ArgumentList '/Quiet
/NoRestart' -PassThru -Wait; } catch { throw 'WmsConnector Install Failed'}; exit $p.ExitCode"</Path>
then save the file again as Unattend-t.xml
d) Proceed with Create and Customize virtual desktop template, and Create virtual desktop station as described on our blog at
Virtual Desktop Templates – Part
1 & Part 2
We continue to investigate why this issue occurs on some machines and not others
Issue #2: UR1 was intended to fix an issue creating virtual desktop templates on true UEFI systems, i.e. systems that don’t fall back to legacy support for earlier BIOS services. UR1 did not solve the issue. For now we are recommending
doing template creation on systems that do fall back to legacy BIOS services. To check: from Device Manager under Disk Drives select your system hard drive. Double click and go to the Volumes tab and click Populate. The Partition Style entry should
be Master Boot Record (MBR). If it is GPT you have a UEFI system.
We continue to investigate fixing this for UEFI systems.

Any word on a UEFI fix? My instructions on the other thread seem to work for me.
Also, I imagine this won't be an issue on the next version of MultiPoint Server since the next Hyper-V in Server 2012 R2 now has those native UEFI VM's. Have you guys played around with that yet? Also, FWIW, I'm not sure why the pre-release docs
mention that UEFI is only supported on Windows 8 VM's. Why not x64 Windows 7 and Vista SP1 VM's? I thought those already support full UEFI boot. Is it because Hyper-V has mandatory restrictions to have Secure Boot turned on for UEFI VM's?

Note: Mail.app and Folders with Dovecot - Copying Folders w Subfolders

I found a problem with Apple Mail regarding folder creation with the new Dovecot Server...
Say you import some mail from Eudora or some other mail client, and you have folders with no messages, only subfolders (or mailboxes if you want to call them that). The mailbox on "My Mac" appears white instead of blue, and you can see the subfolders just fine and everything looks great. Drag that folder (the white one with subfolders) to your IMAP account to copy it to the server. It will copy just fine. Now try to rename or delete that white folder you just copied to the server. You will get the following error:
For this example I will call the problem folder "TestFolder"
The IMAP command RENAME (or DELETE if you try to delete) (to TestFolder) failed with the server error: Mailbox does not exist: TestFolder
The problem is this:
Dovecot creates folders and subfolders as separate directories on the server:
.TestFolder
.TestFolder.TestSubFolder1
.TestFolder.TestSubFolder2
In the above example, there is a folder (or mailbox) called TestFolder with two folders inside it, TestSubFolder1, and TestSubFolder2. This example is the correct way to create a folder with dovecot, or if not "correct", at least you can delete or rename the "TestFolder" without an error.
What happens with Apple Mail (Mail.app), is that when you drag a white folder to the server, it would create the following:
.TestFolder.TestSubFolder1
.TestFolder.TestSubFolder2
Notice the root folder .TestFolder is missing. This is why you get the error message noted above. If you create .TestFolder in the directory, chmod 700 .TestFolder and chown <username> .TestFolder, you can rename or delete the problem folder (notice it turns blue as well). This gets rather annoying when dealing with multiple folders/subfolders, and is not a real graceful way of dealing with the situation.
Apparently there is some intended difference with the white folders and blue folders, in that blue folders can contain messages but white folders can only contain other folders. Great, but Mail.app needs to somehow create the folder on the server in a way that is compatible with Dovecot.
If someone has a developer account (mine keeps complaining that there is missing information, but there is no missing information and won't let me log in), could you post this as a bug report? I'll deal with my developer account later...
Thanks.

> It's not that they don't show up in Mail. In Mail, they are in their
(manually) sorted folders. On the server they are in BOTH their
sorted folder, AND the main inbox where they first appeared.
Yes, but what I’m saying is that, according to your reports, even after rebuilding the Inbox of the .Mac account that has the problem, there are still messages in that mailbox on the server that don’t show up in Mail in that same mailbox. Is that correct? This is what doesn’t make sense to me...
> Mac-mydotmacusername1
Mac-mydotmacusername2
[email protected]
So you have two .Mac accounts and a POP account. You hadn’t mentioned this before, had you? I got the impression that you only had one .Mac account...
Which account has the problem, i.e. for which account there are messages on the server’s Inbox that don’t show up in Mail even after rebuilding that mailbox? Are you moving messages from a .Mac account’s Inbox to custom mailboxes of that same account or to mailboxes associated with the other .Mac account?
<hr>
Try this to determine the scope of the problem:
1. Go to Apple Menu > System Preferences > Accounts and create a new user account for testing purposes.
2. Either log out of your main user account or just quit Mail so that it does not interfere with the other user account.
3. Log in as the newly created user and set up Mail anew there.
4. For spam-related security reasons, go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
5. If you set up a POP account, go to Preferences > Accounts > Advanced and disable Remove copy from server after retrieving a message if it’s enabled, to avoid messages being accidentally removed from the server while testing.
6. Check whether the problem also happens when logged in as another user.

Creating Standby database with Oracle 10gR2 SE (no dataguard). Procedure

Hello,
I have problems in creating a standby database without Dataguard (Oracle Standard Edition)
-Oracle 10gR2 SE (No DataGuard !!!!)
- SUSE Enterprise 10.
Both primary and standby databases are running in Virtual machines (lab).
I will describe the exact steps I followed :
1.---------------------------------------------------
Both primary and standby databases have exactly the same file / folder structure
2.---------------------------------------------------
I enabled archive log mode with a new destination : /opt/oracle/oradata/orcl/archive_logs.
Also : SQL> alter database force logging;
3.---------------------------------------------------
I shut down the primary database (shutdown immediate)
4.---------------------------------------------------
I created a standby controlfile on the primary database:
SQL> startup mount
SQL> alter database create standby controlfile as '/tmp/standby.ctl'
SQL> shutdown immediate
5.---------------------------------------------------
I did a cold backup from the primary db to the standby db
(I copied all the db files, control files, redo log)
6.---------------------------------------------------
I copied from the primary db to the standby db the standby control file
(from primary /tmp/standby.ctl)
7.---------------------------------------------------
I copied from the primary db to the standby db the standby control file
(from primary /tmp/standby.ctl)
8.---------------------------------------------------
I created on the standby database a pfile from the spfile :
SQL> create pfile from spfile;
9.---------------------------------------------------
I edited the pfile and changed the controlfile location (with the standby controlfile created in step 4)
>>>>> *.control_files='/opt/oracle/oradata/orcl/standby.ctl'
10.--------------------------------------------------
I started the standby db
SQL> startup mount pfile='/opt/oracle/product/10.2/db_1/dbs/initorcl.ora'
SQL> alter database recover managed standby database disconnect from session;
SQL> quit
11.--------------------------------------------------
I made some changes on the primary db on user scott
SQL> update table set .......
12.--------------------------------------------------
I switched logfile on the primary db
SQL> alter system switch logfile;
13.--------------------------------------------------
I manually copied the new archivelog to the standby db
And then nothing !!!
The db changes are not applied.
Please help me fix the procedure !!!
Thanks

Hi
Ref to your Oracle SE Standby issue, we were in similar situation couple of years ago to build an Automated Standby for our disaster recovery on Oracle SE. We finally got a solution provider Anbul Technologies , they have a one of their solutions based on Oracle SE which provided fully automated Standby in Oracle SE.
We are successfully running that solution in our prod env for many years. You can visit their site www.anbultechnologies.co.uk or contact them for further details. They are Uk based but provides support and services all over Europe.
Cheers

Dataguard creation with Grid Control

hi all
i'm trying to create a physical standby database with grid control. (asm to asm)
after setting various properties in the wizard, grid goes on creating a broker config and when it gets to the step "preparing standby database creation" it fails with "ERROR: invalid username and/or password."
no more info on where it fails.
preciate if anyone has any tips on what to check.

Hi jstem,
thank you for your help
The initial status of the DATAGUARD is SUCCESS, and all is working fine with the BROKER.
The"Availability"=>"Dataguard Administration" page is correct, all the indications are right, except :
- Estimate Failover Time : Not available
Here is the output of 'Verify Data Guard Setup'
Initializing
Connected to instance srv-bdd02:PHOENIX
Starting alert log monitor...
Updating Data Guard link on database homepage...
Skipping verification of fast-start failover static services check.
Data Protection Settings:
Protection mode : Maximum Availability
Redo Transport Mode settings:
PHNXFIN: SYNC
PHNXENT: SYNC
Checking standby redo log files.....OK
Checking Data Guard status
PHNXFIN : Normal
PHNXENT : Normal
Checking inconsistent properties
Checking agent status
WARNING: No credentials available for target. srv-bdd01
Attempting agent ping ... OK
WARNING: No credentials available for target. srv-bdd02
Attempting agent ping ... OK
Checking applied log on PHNXENT...OK
Processing completed.
Yes, i've already investigated about credentials ...
ALL the credentials are OK for hosts, instance, agent, .... don't know where to add more credentials ....

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

BOM changes(Not creation) with EC Number

Hi
I want to make the ECN as mandatory while changing the BOM,not for creation.
I tried by setting OS27,OS25 settings for BOM. I tried BOM creation with status 3(With history requirement). System gives only warning message,not the error message.(Message no. 29045)
I tried to make the Change number field as mandatory,but it applies it to CS01 & CS02. I want only in CS02.
Plse help me out if any knows the soultion.

Dear Sudhar,
1.Please check in OS27 - Tick mark is included for EC Management Active &
BOM validity manitained and History Requirement.
2.In OS25 - For History Requirement.
3.Get the help from ABAP consultant,to make use of field exit for the particular
screen CS02 ,which has got a screen number.The system will not allow the user
to enter into the next screen unless that field is not filled.
4.Check for the Auth.Object C_STUE_NOH
With this Logic only we are using in my present project.
Check & reply.
Regards
Mangal

Standby creation with BCV copy

Similar Messages

Maybe you are looking for