Start point don't work

Hello experts,
A VC problem, in design view.
I have an abap function that i checked(test & retrieve info from abap).
In the design view I have an input form, abap function & table view. All working great but... without default values. I try to add some default values(start point), but
no change occur.
Thenks in advanced,
Nadav Finish

Since this is a form I guess you want the default values displayed to the user before sending them to the function.
Try adding the default values in the form fields' control properties dialogues. Under general tab you will find the Default value field.
Henning

Similar Messages

  • Start and Start apps don't work after System Restore

    Hey guys, I tried to install Andy (Android emulator) on my PC today and I had to reboot after the setup was complete. This time when booting up, my computer froze before login screen. I've restarted the computer several times, but no login screen.
    So I used System Restore to restore my system (refresh point is 2 days old) and voila, everything works like it should...
    Except for Start menu, Cortana & search bar and notifications. Restarting explorer.exe didn't fix the problem. Even Start menu apps like Music or Store don't work... Only way to open the Settings app is to click on my network connection icon. Help please!
    I'm using build 9926

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

  • Search in start menu don't work, Windows 7, sp1.

    Hi guys!
    I have this really annoying problem with my newly install Win7 pro, sp1.
    The Start Menu Search doesn't work. All I get are 3 files that look like categories (Programs, Control Panel and Files).
    The normal search , in file explorer, works though.
    What I've tried so far:
    I have enabled search in the Start Menu Settings. In Customize Start Menu I have enabled "Search with public folders" and "Search programs and Control Panel".
    I have reset my search indexing several times. I have tried different registry tweaks suggested in forums like these like these:
    http://social.technet.microsoft.com/Forums/windows/en-US/cc594db0-dbe8-4255-a259-5c1914318c3d/search-in-start-menu-stopped-working
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-7-start-menu-search-not-working/1b0bf595-a246-4397-8d05-73e117f046fe?page=6
    Non of these suggestions worked for me. I tried importing the registry keys below as suggested by some posts above:
    [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}]
    "CanonicalName"="StartMenu"
    "Mode"=dword:00000001"
    PerceivedType"=dword:00000000
    "Theme"="default"
    "MostRelevant"="prop:System.Author;System.Keywords"
    "LayoutType"=dword:00000001
    [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews]
    [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews\{00000000-0000-0000-0000-000000000000}]
    "Name"="NoName"
    "Order"=dword:00000000
    "GroupBy"="System.StartMenu.Group"
    "PrimaryProperty"="System.StartMenu.Group"
    "SortByList"="prop:-System.Search.Rank;-System.DateModified;System.ItemNameDisplay"
    "LogicalViewMode"=dword:00000001
    This also didn't do anything.
    I can't find anything else online that addresses this problem. Now I'm getting a little desperate. I'm no novice when it comes to Windows. I have spoken to seasoned Windows tech support people (not from MS). None of them nor I have ever seen this problem
    before. There is very not much help online. Can anybody please help pointing me in the right direction.
    Cheers

    Hi,
    Anything recorded in the event log? You can check the event viewer.
    Regarding to the index option you mentioned, verify that the Start Menu is in the list of indexing option, then check the selected location under indexed location of start menu
    If possible, I suggest you create a new user account, then copy the old files to the new user profile, please refer to this link
    Fix a corrupted user profile
    http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
    Yolanda Zhu
    TechNet Community Support

  • Flash Video Cue Points don't work

    I used the template sample from Adobe named :Flash video
    template: Showcase website for personal video...I followed all the
    steps sugested. I used Flash Video Encoder, created the cue points,
    worte down the location of those cue points, which I wrote exactly
    in the Settings.XML file for each chapter....etc. I guarantee you
    that I did it all as sugested...In fact several months ago, it
    worked for another project and another videos that I had.
    But this time, when I am testing it, the video appears in the
    screen all right but when I select a chapter for the section of
    that video, an error appears like this :
    VideoError: 1003: Invalid seek
    at fl.video::VideoPlayer/seek()
    at fl.video::FLVPlayback/seek()
    at
    Video_fla::MainTimeline/chapterClickHandler()[Video_fla.MainTimeline::frame1:184]
    VideoError: 1003: Invalid seek
    at fl.video::VideoPlayer/seek()
    at fl.video::FLVPlayback/seek()
    at
    Video_fla::MainTimeline/chapterClickHandler()[Video_fla.MainTimeline::frame1:184]
    My Settings file has the correspondent locations for each cue
    point, like this :
    <?xml version="1.0" encoding="utf-8"?>
    <showcase>
    <!-- Video section #1: Safety Fair 2008 -->
    <section>
    <title>Safety Fair 2008</title>
    <video>video/MOPS_safetyFair.flv</video>
    <cuepoints>
    <cuepoint>
    <title>Fire Department 1</title>
    <time>00:00:13.291</time>
    <image>img/Gath1.png</image>
    <caption>What to do in case of a fire at
    home...</caption>
    </cuepoint>
    <cuepoint>
    <title>Fire Department 2</title>
    <time>00:01:39.686</time>
    <image>img/Poison Center.png</image>
    <caption>How to escape from a fire at
    home</caption>
    </cuepoint>
    <cuepoint>
    <title>Crime Stoppers</title>
    <time>00:01:51.869</time>
    <image>img/TxDepTra.png</image>
    <caption>Buckle up...</caption>
    </cuepoint>
    <cuepoint>
    <title>Texas Dep of Transportation</title>
    <time>00:01:51.869</time>
    <image>img/Poison Center.png</image>
    <caption>Assistance by phone in case of
    emergency...</caption>
    </cuepoint>
    <cuepoint>
    <title>Poison Center</title>
    <time>00:02:02.946</time>
    <image>img/Gathering3.png</image>
    <caption>Mops Gathering at the FLC Picnic
    area</caption>
    </cuepoint>
    <cuepoint>
    <title>Fellowship</title>
    <time>00:02:09.591</time>
    <image>img/Kids-with-Jenny.png</image>
    <caption>Nice visit and gathering w/our
    children</caption>
    </cuepoint>
    </cuepoints>
    </section>
    I have my file structure right as well in each folder IMG and
    VIDEO.
    What does this error means and how can I correct the
    problem.....I have been expending hours trying different ways and
    still can't get it to work.
    Thanks,
    Edna

    you don't need a cuepoint to detect the end of your video.  use:
    var lo:Object = {};
    lo.complete = function(eObj:Object):Void {
    next_btn._visible=true;
    flv_pb.addEventListener("complete", lo);   // <- use the instance name of your flvpb component

  • Leopard 10.5.4 and Appleworks Starting Points

    I am a teacher and love using Appleworks 6.2.9 Starting Points Calendars but with my new Imac/Intel I can't seem to get it to work. I keep getting that file cannot be converted to an Appleworks document. Can anyone give me information as to how to get this to work?

    "I open AW, then go to File and plug down to Show Starting Points, click on it. Briefly I see the Starting Points box show up on the screen, then the screen shows up saying that file cannot be opened and do I want to report the problem to Apple. AW always quits at that point.
    This is a far different statement from your original "I can't seem to get it [AppleWorks 6.2.9 Starting Points Calendar] to work. I keep getting that file cannot be converted to an Appleworks document."
    If AppleWorks quits with a File cannot be opened" message while trying to open the Starting Points windows, that would indicate a problem with one of the files or folders in Starting Points. see below for some trouble-shooting steps.
    I have tried to start up Calendar Asst from the hard drive list and it bounces me out and says cannot open file, do I want to report the problem to Apple. The error message is the same whether opening it from AW or the hard drive. "
    This is normal behaviour. As I said earlier, the Assistants cannot be opened from the Finder, only from within AppleWorks. Trying to open an Assistant from the finder will result in the "cannot be converted" message you mentioned earlier. In AW 6, that means only from within Starting Points. (In the previous version Assistants and Templates were a menu item in the File menu.)
    Trouble-shooting steps:
    Qujit AppleWorks before each of these steps. At the end of each step, launch AppleWorks. If AW launches successfully, it indicates the problem lies within one of the folders/files removed during the step just finished; Go to "Successful launch?" If AppleWorks Quits with the same error message as before, continue with the next numbered step.
    1
    I would start with a maintenance step: Trash the contents of AppleWorks's Recent Items folder(s).
    Go to Mac HD > Users > yourname > Documents > AppleWorks User Data > Starting Points > Recent Items. Drag all or most of the items in this folder to the Trash. (The items are aliases to the named files. Deleting them has no effect on the files themselves.) Close the Recent Items folder.
    Create a New Folder on the Desktop. Name it AWUD, and drag all of the folders in AppleWorks User Data into the new AWUD folder.
    2.
    Create a New Folder, SP, on the Desktop. Go to Applications > AppleWorks 6 > Starting Points
    Drag the first two folders (Assistants and Backgrounds) into the new SD folder.
    3.
    Drag the next two folders from Starting Points into SP.
    4.
    Repeat step 3 until all Starting Points folders have been moved into SP.
    Successful launch?
    Quit AppleWorks. Return the folders you moved in PREVIOUS steps to their original folders. Leave the items you moved in the most recent step in the folder where you put them. Launch AppleWorks.
    A successful launch confirms the problem lies in one of the folders you removed in the most recent step.
    Quit AppleWorks. Return one of the folders to its original folder. Launch AppleWorks. Repeat with the remaining folder(s) until AppleWorks quits as before.
    Once you have located the folder containing the problem file, do a similar search of the files in that folder. Open the folder, drag half of the files it contains into one of the (now empty) new folders you created, then re launch AppleWorks. Put half the removed files back and launch again. Repeat until you locate the single file causing trouble.
    If it's one that you do not use, trash it. If you do want to continue using it, it will probably be necessary to re-install AppleWorks from your original disks.
    Regards,
    Barry

  • Chromium doesn't start and suspend, shutdown don't work occassionally

    Hello,
    I have this problem on my laptop but since chromium doesn't start on my desktop either, I don't think it's specific to laptops.
    When I try to start chromium in a terminal, I get a blank window (I can tell because I use spectrwm):
    ATTENTION: default value of option force_s3tc_enable overridden by environment.
    [25148:25148:0215/130205:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
    I temporarily resorted to using Firefox instead, but at times it just freezes up while opening some pages. After that point, even killing firefox doesn't help: the system load level keeps on rising. I used pidof to check if firefox is still running, but I had no output from pidof. After having firefox to freeze, shutdown, suspend, etc don't work. The laptop goes to a black screen state, but the power LED remains on indefinitely.
    These might be two separate issues, but they started together on my laptop.
    Thanks in advance!
    Last edited by SgrA (2015-02-15 09:47:08)

    I also have issues wich starting up  chromium (google-chrome and opera too).
    Feb 15 10:09:58 localhost kernel: [ 102.301038] chromium[786]: segfault at 7ffffd294ff8 ip 00007fb4386962b2 sp 00007ffffd295000 error 6 in chromium[7fb43371e000+66c6000]
    Feb 15 10:12:16 localhost kernel: [ 240.102784] chromium D 0000000000000000 0 786 1 0x00000104
    Feb 15 10:12:16 localhost kernel: [ 240.102789] ffff8800c2d5bb68 0000000000000082 ffff8800c5635a90 0000000000013640
    Feb 15 10:12:16 localhost kernel: [ 240.102793] ffff8800c2d5bfd8 0000000000013640 ffffffff81818540 ffff8800c5635a90
    Feb 15 10:12:16 localhost kernel: [ 240.102796] ffff8800c2d5bb78 0000000000000246 ffffffff81a52047 ffff88042f5eeb08
    Feb 15 10:12:16 localhost kernel: [ 240.102799] Call Trace:
    Feb 15 10:12:16 localhost kernel: [ 240.102809] [<ffffffff8109e777>] ? try_to_wake_up+0x1e7/0x380
    Feb 15 10:12:16 localhost kernel: [ 240.102814] [<ffffffff81551599>] schedule+0x29/0x70
    Feb 15 10:12:16 localhost kernel: [ 240.102818] [<ffffffff81553e25>] rwsem_down_write_failed+0x175/0x360
    Feb 15 10:12:16 localhost kernel: [ 240.102823] [<ffffffff812c0e63>] call_rwsem_down_write_failed+0x13/0x20
    Feb 15 10:12:16 localhost kernel: [ 240.102827] [<ffffffff81553604>] ? down_write+0x24/0x40
    Feb 15 10:12:16 localhost kernel: [ 240.102832] [<ffffffff8122c5cd>] do_coredump+0x16d/0xf30
    Feb 15 10:12:16 localhost kernel: [ 240.102837] [<ffffffff81080524>] ? force_sig_info+0xd4/0xf0
    Feb 15 10:12:16 localhost kernel: [ 240.102841] [<ffffffff8107e3d7>] ? __sigqueue_free.part.15+0x37/0x40
    Feb 15 10:12:16 localhost kernel: [ 240.102846] [<ffffffff8108180c>] get_signal+0x38c/0x710
    Feb 15 10:12:16 localhost kernel: [ 240.102852] [<ffffffff81014617>] do_signal+0x37/0x800
    Feb 15 10:12:16 localhost kernel: [ 240.102855] [<ffffffff81550f08>] ? __schedule+0x3e8/0xa50
    Feb 15 10:12:16 localhost kernel: [ 240.102859] [<ffffffff81014e48>] do_notify_resume+0x68/0xa0
    Feb 15 10:12:16 localhost kernel: [ 240.102863] [<ffffffff81556322>] retint_signal+0x48/0x86
    Feb 15 10:12:16 localhost kernel: [ 240.102871] Watchdog D 0000000000000004 0 794 1 0x00000104
    Feb 15 10:12:16 localhost kernel: [ 240.102874] ffff880402757d40 0000000000000082 ffff8800c5632840 0000000000013640
    Feb 15 10:12:16 localhost kernel: [ 240.102877] ffff880402757fd8 0000000000013640 ffff880418841420 ffff8800c5632840
    Feb 15 10:12:16 localhost kernel: [ 240.102880] ffff880402757ce8 ffff880402757e70 00000000ffffff92 ffff880402757c98
    Feb 15 10:12:16 localhost kernel: [ 240.102883] Call Trace:
    Feb 15 10:12:16 localhost kernel: [ 240.102888] [<ffffffff810dbe32>] ? hrtimer_cancel+0x22/0x30
    Feb 15 10:12:16 localhost kernel: [ 240.102893] [<ffffffff810ed4e6>] ? futex_wait+0x206/0x280
    Feb 15 10:12:16 localhost kernel: [ 240.102897] [<ffffffff810dbbc0>] ? __run_hrtimer+0x250/0x250
    Feb 15 10:12:16 localhost kernel: [ 240.102900] [<ffffffff81551599>] schedule+0x29/0x70
    Feb 15 10:12:16 localhost kernel: [ 240.102903] [<ffffffff81553c65>] rwsem_down_read_failed+0xe5/0x130
    Feb 15 10:12:16 localhost kernel: [ 240.102906] [<ffffffff810ed0d0>] ? futex_wake+0x80/0x160
    Feb 15 10:12:16 localhost kernel: [ 240.102910] [<ffffffff812c0e34>] call_rwsem_down_read_failed+0x14/0x30
    Feb 15 10:12:16 localhost kernel: [ 240.102913] [<ffffffff815535d7>] ? down_read+0x17/0x20
    Feb 15 10:12:16 localhost kernel: [ 240.102918] [<ffffffff81060aed>] __do_page_fault+0x1ed/0x600
    Feb 15 10:12:16 localhost kernel: [ 240.102923] [<ffffffff8110e7f9>] ? seccomp_phase1+0x99/0x210
    Feb 15 10:12:16 localhost kernel: [ 240.102927] [<ffffffff81060f22>] do_page_fault+0x22/0x30
    Feb 15 10:12:16 localhost kernel: [ 240.102930] [<ffffffff81557598>] page_fault+0x28/0x30
    Feb 15 10:12:43 localhost kernel: [ 267.288947] chromium[920]: segfault at 7fff3faceff8 ip 00007fa90fcc62bc sp 00007fff3facf000 error 6 in chromium[7fa90ad4e000+66c6000]
    It started happening after upgrade:
    [2015-02-15 09:43] [ALPM] upgraded chromium (40.0.2214.94-1 -> 40.0.2214.111-1)
    I was wondering if it has anything to do with some X-related upgrades:
    [2015-02-15 09:42] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.16.4-1)
    [2015-02-15 09:43] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.16.4-1)
    [2015-02-15 09:48] [ALPM] upgraded xorg-server-devel (1.16.3-2 -> 1.16.4-1)
    [2015-02-15 09:45] [ALPM] upgraded nvidia (346.35-5 -> 346.35-6)
    I tried to downgrade chromimu to 40.0.2214.94-1 and it didn't help. I tried to downgrade nvidia, xorg-server and xorg-server-devel to previous versions, when everything worked and X chouldn't start.
    Other observations are that if I start chromium, the ps command hangs and I have to reboot the system to be able to use ps command again.
    Linux lisa 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
    It's worth mentioning that I also run spectrwm, like SgrA, however i don't have other issues with freezing on shutdown etc.

  • Z77A-GD65 - fast ram and Intel Rapid Start don't work together??

    Greetings.
    I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write to the special partition for IRS. The PC then try to reboot, but after 2 attemps it says that the Overclocking has failed and I have the choise of F1 (setup) or F2 (load default settings and continue).
    If I lower the ram speed below the default speed (i.e. don't use the XMP profile), then Intel Rapid Start works fine.
    Memtest86 do not show any error at all after 4 pass with the G.Skill at 2400Mhz. To me it seems like the motherboard can't handle this speed at the state in Intel Rapid Start.
    Anybody with info about what to do? 

    Quote from: RemusM on 16-January-14, 00:14:15
    The internet is bloated with paid "reviews" ...
    Here is what you have and what you paid for:
    http://ark.intel.com/products/65520
    Max Memory Size (dependent on memory type) : 32 GB
    Memory Types : DDR3-1333/1600
    Memory Channels : 2
    Max Memory Bandwidth : 25.6 GB/s
    Intel does not guarantee anything above 1600MHz.
    On the top of that, 25.6 GB/s bandwidth is enough for DDR3-1600 in dual-channel only.
    In other words, above 1600Mhz the perfomances boost is close to ZERO.
    RAM speed over 1600Mhz does nothing? That WAS true, but not anymore. First of this:
    Anandtech:
    http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill
    xbitlabs:
    http://www.xbitlabs.com/articles/memory/display/ivy-bridge-ddr3.html
    overclock.net:
    http://www.overclock.net/t/1438222/battlefield-4-ram-memory-benchmark
    Second, I can messure a real performance difference when using this memory at 2400mhz vs 1600mhz, f.i. Winrar5.01 x64, when searching in reg.database, and other memoryhungry programs. My graphic-card is not powerfull enough to show any difference in games, but almost anything else I _can_ se a difference.
    If you honestly can read these 3 links and still say, that memory speed does not matter, I think I know more about this than you 
    I'm quite sure, that a big place like Anandtech is not payed to show up this result.

  • Direct Selection Tool don't works cause points dissapear in shapes

    Good evening,
    I'm using Photoshop CC under a Macbook Pro Retina Display (15 inches), I've noticed that since lasts updates, when I use the direct selection tool for chaning a shape trace the points that should appear for selecting each anchor dissapears, and there's no way to get them back (sometimes by closing the program and restarting fixes this issue).
    The tool is working because when I clic somewhere over a shape it gets highlighted on layers panel, but I can't see the points and so, can't modify the shape.
    Does this belongs to any option? (I know in Illustrator there's an option to see or hide the points, but don't know if in Photoshop goes the same way or not) or it's a bug from the last updates? (I would say that it didn't happen at the beggining). But as I use a lot shorcuts, sometimes I can make a misstake and press cmd + wrong key, so I think it could be the reason for this... but I'm not quite sure.
    Thanks in advice!
    EDIT:
    I've seen that if I hide the "extras" (cmd + H) it hides the guides but also the points from shapes (that shouldn't be this way, right?) and even I can see them when I turn them on, I can't pick just one as I did in CS6 by using direct selection tool and pressing on just one point (at the beggining all of them are highlighted cause you've got selected the whole shape layer, but when you press one, it should get this highlighted and turn off the rest of them), and the only way to get just one point is to pan with the cursor and make a selection, passing over the points you want to highlight, but this is annoying cause if you've got any other shape below, it will select it as well.

    1000x this. My designs are 100% vector shapes, so if Adobe have changed this core behavior intentionally, they’ve just made my life a lot more difficult.
    We should be able to use the Direct Selection Tool to select a shape layer (similar to how the Move Tool has done) by clicking on any visible pixel. But then we should be able to freely drag-select points on that shape (starting from any neutral area) without selecting other shape layers. This is how it’s worked since before I can remember.
    Here’s why the two new selection modes don’t work:
    Active Layers - I can no longer freely select any visible shape. Instead I’m forced to make a time-consuming roundabout to the layer palette, where I have to squint to find my shape layer, and activate it manually before continuing. (Hitting “V” to select a layer, then “A” to get back to the D.S. Tool is nearly as cumbersome. Plus, I leave off the Move Tool's auto-select mode.)
    All Layers - Treats all my shapes as if they’re on one layer. Overlapping shapes are therefore impossible to work with -- mainly drag-selecting and deselecting points -- in situ.
    We either need a “legacy” setting, or some way to constrain selection on drag, via a key modifier or something. This “all or nothing" thing doesn’t work for me... and apparently for others. Why would they change such a thing?
    Or maybe there’s something I’m missing. Please let that be the case!

  • F11 Recovery don`t work - error Windows failed to start

    After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
    File: \windows\system32\winload.efi
    status: 0x0000001
    Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
    ?Any ideas?
    This question was solved.
    View Solution.

    1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
    2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
    3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
    It's very sad, it was a gift to my father for Christmas.
    I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets. 
    I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

  • Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

    Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

    Try resetting your SMC and PRAM.
    Resetting the System Management Controller  >>
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Don't know how to set an interactive form as starting point?

    Hi all,
    I need to have a scenario where the starting point of a guided procedure is an interactive form.
    I've made an interactive form in Adobe Designer and saved it as .xdp
    I've made a callable object from it, add it to an action and add the action into a process.
    Now when I initiate a new process in runtime I only see the input fields from the form in a Web Dynpro like design and not the actual form itself.
    I thought it was just a simple handling to start a guided procedure process with an IF but it appears not to be for me.
    Can somebody help me please?

    The input parameters you are seeing in a 'Web Dynpro like' form are more than likely input parameters to the process.  Process input parameters come from action input parameters  in process blocks and actions that are not mapped.  Given that, it sounds like you have not mapped all the input parameters for one or more of your actions in your process.  By default, GP provides the process initiator the ability to specify the values of these inputs when a process is started. To avoid this you can either,
    1. Map all the input parameters.
    2. Specify the process to start automatically under the 'Instantiation' tab for the process template.  By selecting this, input parameters are ignored and their default values used.
    3. Don't expose these parameters if they are not required or applicable to your process.  This can be done at the action or block level under the 'Parameters' tab.
    ~Greg

  • Financial Reporting - don't work condition "starts with"

    Hi All,
    I want exclude rows from report where dimension members name start with "9", I try suppress row with condition "starts with", but this don't work.
    When I explore Conditional Suppression feature I got positive take only for "contains" condition.
    Please help me how I can exclude rows from my report.

    I make sense, condition "starts with" work perfect, error in hierarchy on my dimension.
    Hyperion Financial Reporting the best :8}

  • View all what I have done from a specific start point or time frame ?

    While I am Creating A Controlling Area,  and Defining a Cost Center Standard Hierarchy
    get a phone call or meeting.   Need to get back to keep going,  is there a way or a T-Code to view all what I have done from a specific start point or time frame ?

    Greatly appreciate every single reply from all of you.
    I did access T-Code SE10, and attached a screen.
    The most confusing thing i have ever seen   
    I was hoping for some type of report that looks like an Excel sheet where it can give better details.

  • Cannot update itunes10.6.3.  I get no errors. I repaired all of the apple programs and it still don't work.  Acts like it wants to start but doesn't.  Thanks in advance

    I cannot updated itunes 10.6.3.  I receive no errors.  I repaired all of the apple programs as suggested in other discussions but it still don't work.  Do I need to uninstall and start over again?

    Initially I received the usual message to update.  I replied to it but it did not respond.  I then tried to manually  update through iTunes and it did nothing.  Only reaction I get is that the cursor "flutters" for a second and than tries to go to the store for maybe a second and than nothing else happens.
    With that one, try updating using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    Does that go through any better for you?

  • Starting on external hard drive with OSX.6.8 don't works

    starting on external hard drive with OSX.6.8 don't works
    On mac book with OSX.7.5 it start with my external hard drive with OSX6.8

    10.6 does not support an iMac that came with a later OS X version.
    see > Don't install a version of Mac OS X earlier than what came with your Mac

Maybe you are looking for