Start rtorrent on boot?

Hello,
I'm trying to make a torrent box. So far I've installed rtorrent and wtorrent (web front-end). I haven't been able to get rtorrent to download yet, but that's because I haven't really configured it.
Is there anyway to start rtorrent as a daemon upon boot? The way it's set up now, after the server boots, I have to manually log into my user and start it with `rtorrent`. I'd like for rtorrent to start automatically. Also, is there an global config file for rtorrent? As far as I know, it takes it's configuration from ~/.rtorrent.rc, which is user specific (which will get in the way if the rtorrent starts as a daemon, ie: non-user)
Thanks

I'd add
su username -c "screen rtorrent"
to rc.local.
-edit-
Found this: http://bbs.archlinux.org/viewtopic.php?id=53395
Last edited by lucke (2009-05-23 23:15:08)

Similar Messages

Dhcpcd does not start automatically on boot

Hi everyone,
I have just installed Arch (64 bit) and am running on a dynamic, wired connection.
I followed the Beginners' Guide and enabled the dhcpcd service during the installation so that it would start automatically on boot.
systemctl enable [email protected]
However, I currently must issue the command "dhcpcd" each boot before the internet starts to work.
Does anyone know how I can automate this process or if I need to further configure my network connection?
Thank you in advance.
Last edited by Ipozya (2012-11-15 11:29:05)

foppe wrote:
Check the output from
# systemctl status [email protected]
to debug the issue you're experiencing.
% sudo systemctl status [email protected]
[email protected] - dhcpcd on eth0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Tue, 2012-11-15 20:38:16 GMT; 27 sec ago
Process: 244 ExecStart=/sbin/dhcpcd -A -q -w %I (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/[email protected]/eth0
Nov 15 20:37:47 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:47 arch dhcpcd[244]: eth0: sendmsg: Cannot assign requested address
Nov 15 20:37:47 arch dhcpcd[244]: eth0: broadcasting for a lease
Nov 15 20:37:51 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:55 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:59 arch dhcpcd[244]: eth0: sending IPv6 Router Solicitation
Nov 15 20:37:59 arch dhcpcd[244]: eth0: no IPv6 Routers available
Nov 15 20:38:16 arch dhcpcd[244]: timed out
Nov 15 20:38:16 arch systemd[1]: Failed to start dhcpcd on eth0.
Nov 15 20:38:16 arch systemd[1]: Unit [email protected] entered failed state
Dhclient did not work automatically on boot either.
Others seem to have experienced similar issues but I don't see any real solutions in any of these posts, despite being marked as solved. For example, adding "-t 120" to the dhcpcd start line in /usr/lib/systemd/system/[email protected] did not work for me.
I also tried the following but it did not work either and I had to issue "dhcpcd" before internet started working.
Install and configure wired and wireless networking
# pacman -S netcfg ifplugd
# cd /etc/network.d
# ln -s examples/ethernet-dhcp .
Make sure the WIRED_INTERFACE and WIRELESS_INTERFACE lines is uncommented
# nano /etc/conf.d/netcfg
# systemctl enable net-auto-wired.service
# pacman -S wireless_tools wpa_supplicant wpa_actiond dialog
# systemctl enable net-auto-wireless.service
https://bbs.archlinux.org/viewtopic.php?pid=1176656
https://bbs.archlinux.org/viewtopic.php?pid=1189587
https://bbs.archlinux.org/viewtopic.php?pid=1180192
Last edited by Ipozya (2012-11-15 21:08:03)

Btsync not starting correctly at boot

Hi all,
I have installed Btsync with the help of this nice guide:
https://wiki.archlinux.org/index.php/BitTorrent_Sync
Running this on the RaspberryPi.
And it starts when I boot but it does not show any logs (systemctl status btsync@username) and the GUI does not work until I do a
systemctl restart btsync@username
What shall I do?
Regards
Kristofer

Service file: [email protected]
[Unit]
Description=Bittorent Sync service for %i
After=network.target
[Service]
User=%i
ExecStart=/usr/bin/btsync --config %h/.config/btsync/btsync.conf --nodaemon
Restart=on-abort
[Install]
WantedBy=multi-user.target
After a reboot when the btsync does not work:
systemctl status btsync@xx
[email protected] - Bittorent Sync service for xx
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Thu 1970-01-01 01:00:23 CET; 44 years 0 months ago
Main PID: 143 (btsync)
CGroup: /system.slice/system-btsync.slice/[email protected]
`-143 /usr/bin/btsync --config /home/xx/.config/btsync/btsync.c...

How to start tomcat at boot on 10.8

I have been trying for days to get Tomcat to start on system boot. I have it working fine as an launch daemon when I log on, but I want it to start when the system starts. I have installed the plist to start tomcat in /System/Library, changed the ownership to root:wheel, ensured that the script it runs is accessible and workable, but no luck. Where am I going wrong.

I have been trying for days to get Tomcat to start on system boot. I have it working fine as an launch daemon when I log on, but I want it to start when the system starts. I have installed the plist to start tomcat in /System/Library, changed the ownership to root:wheel, ensured that the script it runs is accessible and workable, but no luck. Where am I going wrong.

I bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?

i bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?
plz help me

Hi Jaimie,
To install Windows via Boot Camp you will need to have a copy of Windows on a physical dvd disc.
If your purchase provides you with an ".ISO" file then you can simply burn this to a DVD and then follow the standard Boot Camp installation instructions.
Boot Camp instructions: http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
If you get stuck, just let me know the website you purchased Windows 7 from and I might be able to help you out.
Cheers

Macbook upgrade to Lion.. how do i minimize what applications start up from boot ?

how do i minimize what applications start up from boot (start-up) ??
excel, word, safari and mail are all opening
takes too long

Disable Resume...
How To Disable Lion's 'Resume' Feature - MacRumors.com
And if you restart your Mac from the Apple menu > Restart
Deselect: Reopen windows when logging back in

How do I start service at boot?

Hello,
I am relatively new to arch, so I have played with it since .3 on and off but never as a server. Right now I can start mysql, httpd and exim just fine, but they don't seem to be starting up at boot time. How do I fix this?
Thanks,
mrjohnston

Hi mrjohnston,
You have to add an entry for each daemon in the DAEMONS array in the file /etc/rc.conf. If you add "exim" (for example) to the DAEMONS line, the file /etc/rc.d/exim will be executed, and that should get it started at bootup.
Cheers.

OSX 10.6 .8 -- Firefox automatically starts when I boot up (MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options. Don't know where else to look.

How do I keep Firefox automatically starts when I boot up (OSX 10.6 .8 -- MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options.

Hi fullrun-
Once Firefox is open, you should be able to open the Right click context menu on the icon. From there you select 'Options' and then de-select 'Open at Login'. Hope that helps.

Oracle 11g XE listener does not start automatically during boot

Hi,
This happened to me recently I just wanted to share it with you.
For development I was running Standard Edition, at some point I decided to run also XE on the same server for another reasons. Everything was working fine, except that after restart of the server, the XE listener is not starting automatically. Debugging the startup script I found that this happens because of a bug in the code, which assumes that XE listener is running if it finds the word LISTENER within the processes list. I didn't found any obligation in the docs for running XE without any other databases on the same host.
In file /etc/init.d/oracle-xe, at line 556 the code is failing:
1     + status='oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit'
2     + '[' 'oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit' == '' ']'
As you can see I have another listener(the one for SE) running and because of the XE startup script found the keyword LISTENER it’s supposing that the XE LISTENER is already running.
To fix this simply change line 556 from:
1     status=`ps -ef | grep tns | grep oracle`
To:
1     status=`ps -ef | grep tns | grep oracle | grep xe`
Now XE listener is started automatically during boot.
Sve
Blog: http://sve.to
Twitter: sgyurov

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

Grid on a standalone server Cluster daemons not starting during server boot

Hi!I have installed Oracle Grid on a standalone server and setup Oracle db 11.2.0.2 on Oracle Linux 6.2 64 bit server.When I reoot the server and run crs_stat -t,several daemons havent started thus the ASM and db instances are also down as below
Name Type Target State Host
ora.DATA.dg ora....up.type OFFLINE OFFLINE
ora.FRADG.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE amldb01dc
ora.amldb.db ora....se.type OFFLINE OFFLINE
ora.asm ora.asm.type OFFLINE OFFLINE
ora.cssd ora.cssd.type ONLINE OFFLINE
ora.diskmon ora....on.type ONLINE OFFLINE
ora.evmd ora.evm.type ONLINE ONLINE amldb01dc
ora.ons ora.ons.type OFFLINE OFFLINE
I am forced to manually start the daemons via command crsctl start resource -all then I manually start the ASM and db instances.
Yet when I run the commands
crsctl config has
CRS-4622: Oracle High Availability Services autostart is enabled.
crsctl check has
CRS-4638: Oracle High Availability Services is online.
Thus I would assume the daemons would start automatically during boot.
How can I resolve this?

crstcl check crs seems not to be applicable to single instance but for RAC,since I have a single instance db,the output of the command is as below
crsctl check crs
Parse error:
'crs' is an invalid argument
Brief usage:
crsctl check has
Check status of OHAS.
There is no crsd.log in path /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/crsd.The output of crs_stat -t is already posted in initial post and output of entire alert log is as below
2012-07-03 16:18:35.975
[client(8182)]CRS-2101:The OLR was formatted using version 3.
2012-07-03 16:18:36.471
[client(8218)]CRS-1001:The OCR was formatted using version 3.
[client(8293)]CRS-10001:CRS-6021: No msg for has:crs-6021 [l][unlimited]
[client(8294)]CRS-10001:CRS-6021: No msg for has:crs-6021 [n][65536]
2012-07-03 16:18:42.528
[ohasd(8291)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:18:42.538
[ohasd(8291)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:18:51.271
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:18:52.299
[evmd(8479)]CRS-1401:EVMD started on node amldb01dc.
[client(8520)]CRS-10001:03-Jul-12 16:18 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
[client(8889)]CRS-10001:03-Jul-12 16:19 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:19:22.600
[cssd(9014)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:19:31.128
[cssd(9014)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
[client(10038)]CRS-10001:03-Jul-12 16:25 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:34:13.791
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:37:39.674
[ohasd(8291)]CRS-2765:Resource 'ora.DATA.dg' has failed on server 'amldb01dc'.
2012-07-03 16:37:43.636
[ohasd(8291)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-03 16:38:06.905
[cssd(9014)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-03 16:38:07.006
[cssd(9014)]CRS-1660:The CSS daemon shutdown has completed
2012-07-03 16:38:10.118
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:09.578
[ohasd(4827)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:42:09.649
[ohasd(4827)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:42:10.437
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:2:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:10.667
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:40.463
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:40.464
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:54.641
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:55.675
[evmd(5060)]CRS-1401:EVMD started on node amldb01dc.
2012-07-03 16:54:35.840
[cssd(5256)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:54:44.396
[cssd(5256)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
2012-07-03 16:54:56.832
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:03:53.530
[ohasd(4827)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-04 10:04:02.701
[cssd(5256)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-04 10:04:02.809
[cssd(5256)]CRS-1660:The CSS daemon shutdown has completed
2012-07-04 10:04:03.008
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:07:48.492
[ohasd(4698)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:07:48.534
[ohasd(4698)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:07:49.059
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:07:49.192
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:08:19.085
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:19.093
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:33.278
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:34.319
[evmd(5069)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:27:13.716
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:30:57.260
[ohasd(4619)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:30:57.280
[ohasd(4619)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:30:57.660
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:30:57.784
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:41.868
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:42.916
[evmd(5184)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:39:17.166
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:01.219
[ohasd(4575)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:43:01.240
[ohasd(4575)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:43:01.643
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:01.781
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:45.864
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5120)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:46.915
[evmd(5136)]CRS-1401:EVMD started on node amldb01dc.

On system start up safari boots up and shortly after chrome boots up. why? I do not want chrome to boot up.

on system start up safari boots up and shortly after chrome boots up. why? I do not want chrome to boot up.. What do I need to do?

It's likely that one of your login items is causing the problem. Select the Login Items tab in the Users & Groups pane of System Preferences. Delete any items that you don't recognize. If you're not sure which ones to delete, double-click each to test it.

How do I start slapd at boot time in leopard?

Greeting,
Forgive me if this is the wrong forum/community.
I want to start slapd at boot time on my new leopard upgrade. On tiger, it was as simple as having an LDAPSERVER=-YES- line in /etc/hostconfig. That does not seem to work for leopard. I can run slapd from the command line. I needed to make changes to the slapd.conf tiger version and reload my database, but all is working fine. I just have not been able to get the deamon to start at boot up. It must be simple. Any ideas?
Thanks,
--Linn

Texas Mac Man,
Thanks. Slapd is the OpenLDAP daemon (server) delivered with MacOS, even Client. No, starting at the user level is not what I need. I can already do that in a terminal window with /usr/libexec/slapd, after I get su'ed to root.
Think Unix, not iApps. When the system boots up, there should be scripts available to start specific daemons. I am looking for hints there.
BDAqua,
Thanks. I had seen that first discussion before. It deals with slapd failing when it tries to start on MacOS Server... where all these daemons indeed start at boot time. I am just trying to figure out how to do in leopard what I successfully did in tiger, namely start /usr/libexec/slapd at boot time.
And note, this is not an issue with slapd failing due to slapd.conf or database problems. All works fine from the user lever start.
Thanks,
--Linn

LaCie ext drives not starting up on boot

I have 4 LaCie drives that do not automatically turn on mount when I power up my tower:
2TB LaCie BIGGER U2&F4&F8 EXTR 7200RPM 16MB US
Big Disk
d2 Hard Drives
When I have connected my older 17" PowerBook, the drives start up on boot and turn off at shutdown as they should. This action also occurred successfully on my previous G5 tower running Tiger. This is not occurring on my current G5 tower (Mac Pro).
Both systems are running Leopard, but the 17" PB is NOT the Intel processor like the tower.
All firmware has been updated on the external drives per LaCie's instructions, and they are now suggesting I turn this issue over to Apple to figure out.
The drives work fine, and I can turn them on manually when I boot the machine, but I just want my automatic turn on and turn off back.
Suggestions?

Ok here's the output after a fresh boot.
ben@arch-desktop:~$ systemctl status [email protected] -l
[email protected] - PS3 Media Server
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Wed 2014-03-05 22:20:11 EST; 1min 8s ago
Main PID: 601 (java)
CGroup: /system.slice/system-pms.slice/[email protected]
└─601 java -Xmx768M -Xss1024k -Dfile.encoding=UTF-8 -Djava.net.preferIPv4Stack=true -Djna.nosys=true -classpath update.jar:pms.jar net.pms.PMS
Mar 05 22:20:20 arch-desktop PMS.sh[601]: at java.lang.Thread.run(Thread.java:744) [na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: ERROR 2014-03-05 22:20:21.264 [UPNPHelper] UPNP network exception
Mar 05 22:20:21 arch-desktop PMS.sh[601]: java.net.SocketException: No such device
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.PlainDatagramSocketImpl.join(Native Method) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.AbstractPlainDatagramSocketImpl.join(AbstractPlainDatagramSocketImpl.java:178) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.net.MulticastSocket.joinGroup(MulticastSocket.java:319) ~[na:1.7.0_51]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at net.pms.network.UPNPHelper$2.run(UPNPHelper.java:384) ~[pms.jar:1.90.1]
Mar 05 22:20:21 arch-desktop PMS.sh[601]: at java.lang.Thread.run(Thread.java:744) [na:1.7.0_51]
Mar 05 22:21:05 arch-desktop PMS.sh[601]: INFO 2014-03-05 22:21:05.376 [UPNPHelper] No IP filter specified, access granted to /192.168.1.42
Mar 05 22:21:05 arch-desktop PMS.sh[601]: INFO 2014-03-05 22:21:05.377 [UPNPHelper] Using the following UUID configured in PMS.conf: 6ed45cde-e5fa-4e6b-a419-306a122aba82

HT5639 When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?

When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?
I am currently using Windows 8 and also have Microsoft office installed but those are the only thing on my partitioned space. I don't know if I installed 32 or 64 version of Windows 8. Could that be the problem?

Can you deal with XP not being supported by Apple and Microsoft? no security etc?
Can you use Windows in a VM instead of natively?
All the drives other than the one with XP will need to be pulled.
Always have backups of your system, clone that you can boot from.
Boot Camp 3.0 was the last supported. You don't need OEM 10.4.6 DVD and your system with EFI and SMC updates (Aug/Sept 2007) may not like it.
32-bit version of Windows on EFI-32 will only get 1.9GB RAM.
Installing 64-bit Windows 7 is a bit harder. Vista pre-SP1 64-bit was the best match for install on my 1,1 and that was 2006-2007.
The new owner needs to deal with this, not you. And really they are better off with a $400 PC instead. Or use a VM.
the owner should put in a new SSD for the system and $44 buys 4 x 2GB RAM. Together it will run just fine. 500GB SSD now $250 / $135 250GB. Biggest issue is a video card on these.
The grey screen - you upgraded the graphic card perhaps.
Unplug everything. Hit power for 5-10 seconds. Reconnect cables for mouse/kb and power, and monitor. You just reset SMC. Yes there is a small button - pull drive #4 and any controller in top slot #4 to see the SMC motherboard reset button but you don't need to.
Any PCIe cards can also play a role and factor into XP or Windows not working.

Ical automatically starts when I boot up but I don't have it set to autostart. Why ?

ical automatically starts when I boot. I have nothing set to auto start. Any ideas?

I now have double entries for all of my contacts since I downloaded 3.0 software to my iPhone 3G. Can't figure out why. I sinc with an IMac and I have mobileme. Looked at my settings on iPhone and I don't see why this is happening. Anyone got a suggestion?

Start rtorrent on boot?

Similar Messages

Maybe you are looking for