Start wlst partialy working.

Hi All,
we are using wlst to start the weblogic server, we use startServer( jvmArgs=args ) in wlst. it works fine if the boot.properties is in domain folder. if we put it in domain folder and execute it, the server starts fine and the script waits for timeout and after timeout it throws a IOException and terminates the server.
WLST-WLS-1300117682885: <WSEE:31>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a
result, Web Service async responses via jms transport is not supported. If the target service uses J
MS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
.........................Unable to start the server, startServer timed Out ...
WLST-WLS-1300117682885: IOException when running WLSTProcess
java.io.IOException: Stream closed
at java.io.BufferedInputStream.getBufIfOpen(BufferedInputStream.java:145)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:255)
at java.io.BufferedInputStream.read(BufferedInputStream.java:317)
at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at weblogic.management.scripting.utils.WLSTProcess.run(WLSTProcess.java:78)
at java.lang.Thread.run(Thread.java:619)
WLST-WLS-1300117682885: Stopped draining WLST-WLS-1300117682885
No stack trace available.
Problem invoking WLST - Traceback (innermost last):
File "/wslt/4.1/start_application.wslt", line 9, in ?
File "<iostream>", line 418, in startServer
WLSTException: Error occured while performing startServer : Could not start the server, the process
might have timed out or there is an Error starting the server. Please refer to the log files for mor
e details.

Another thing that i found was that in the taskbar properties in the star menu tab it dosent show an option to change betwen start menu or start screen
Add:
In preview build 10041, taskbar prooerties\start menu, there's no option to chang between menu and screen, you can see mine:
while you can maximize start menu to full screen.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Starting WLST in Interactive mode

I am having a lot of trouble starting WLST in Interactive mode. I am running setWLEnv.sh and then using the command java weblogic.WLST and I get the following error.
root@esrsqa1 bin# ./setWLSEnv.sh
CLASSPATH=/opt/bea/patch_wlw1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/patch_wls1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/jrockit_150_11/lib/tools.jar:/opt/bea/wlserver_10.0/server/lib/weblogic_sp.jar:/opt/bea/wlserver_10.0/server/lib/weblogic.jar:/opt/bea/modules/features/weblogic.server.modules_10.0.1.0.jar:/opt/bea/modules/features/com.bea.cie.common-plugin.launch_2.1.2.0.jar:/opt/bea/wlserver_10.0/server/lib/webservices.jar:/opt/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/bea/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar:
PATH=/opt/bea/wlserver_10.0/server/bin:/opt/bea/modules/org.apache.ant_1.6.5/bin:/opt/bea/jrockit_150_11/jre/bin:/opt/bea/jrockit_150_11/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/oracle_client/product/11.1.0/client_1/bin:/root/bin
Your environment has been set.
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin# java Weblogic.WLST
Exception in thread "main" java.lang.NoClassDefFoundError: Weblogic.WLST
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Caused by: java.lang.ClassNotFoundException: Weblogic.WLST not found in gnu.gcj.
runtime.SystemClassLoader{urls=[file:./], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
I can use WLST just fine if I pass it a python script but it will not work interactively. I am using WLST in my startup and shutdown scripts and they work flawlessly. Does anybody have any ideas?
Thanks,
Scott
Edited by: carters2 on Apr 2, 2009 6:46 AM
Edited by: carters2 on Apr 2, 2009 6:49 AM

Team,
As per the instructions, I have changed the port from 7001 to 10003
java weblogic.WLST
wls:/offline> connect()
Please enter your username [weblogic] : weblogic
Please enter your password [weblogic] : weblogic
Please enter your server URL [t3://localhost:7001] : t3://localhost:7001
Connecting to t3://localhost:7001 with userid weblogic ...
edit()
startEdit()
cd ('Servers/AdminServer')
cmo.setListenPort(9999)
save()
activate()
When I tried to start the server, I am receiving the following error
May 4, 2010 4:15:41 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun
Microsystems Inc.>
<May 4, 2010 4:15:42 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 380194 Fri Oct 24 13:20:13 IST 2008
WebLogic Server Temporary Patch for 8408837 Fri Apr 03 17:01:18 EDT 2009
WebLogic Server Temporary Patch for CR378781, CR380313 Fri Sep 19 13:34:16 PDT 2008
WebLogic Server Temporary Patch for CR381056 Mon Oct 06 10:48:50 EDT 2008
WebLogic Server Temporary Patch for CR374413, CR378680 Tue Sep 02 09:55:36 PDT 2008
WebLogic Server Temporary Patch for CR378102 Wed Sep 10 23:28:48 PDT 2008
WebLogic Server Temporary Patch for CR378741 Tue Sep 09 13:08:51 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<May 4, 2010 4:15:43 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 4, 2010 4:15:43 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 4, 2010 4:15:44 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\user_projects\domains\osb_domain\servers\AdminServer\l
ogs\AdminServer.log is opened. All server side log events will be written to this file.>
<May 4, 2010 4:15:44 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
java.net.UnknownHostException: aaa.bbb.org:10003
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:849)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1200)
at java.net.InetAddress.getAllByName0(InetAddress.java:1153)
at java.net.InetAddress.getAllByName(InetAddress.java:1083)
at java.net.InetAddress.getAllByName(InetAddress.java:1019)
at java.net.InetAddress.getByName(InetAddress.java:969)
at weblogic.rjvm.JVMID.setLocalID(JVMID.java:201)
at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
How do I start the server now?

Z77A-GD65 - fast ram and Intel Rapid Start don't work together??

Greetings.
I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write to the special partition for IRS. The PC then try to reboot, but after 2 attemps it says that the Overclocking has failed and I have the choise of F1 (setup) or F2 (load default settings and continue).
If I lower the ram speed below the default speed (i.e. don't use the XMP profile), then Intel Rapid Start works fine.
Memtest86 do not show any error at all after 4 pass with the G.Skill at 2400Mhz. To me it seems like the motherboard can't handle this speed at the state in Intel Rapid Start.
Anybody with info about what to do?

Quote from: RemusM on 16-January-14, 00:14:15
The internet is bloated with paid "reviews" ...
Here is what you have and what you paid for:
http://ark.intel.com/products/65520
Max Memory Size (dependent on memory type) : 32 GB
Memory Types : DDR3-1333/1600
Memory Channels : 2
Max Memory Bandwidth : 25.6 GB/s
Intel does not guarantee anything above 1600MHz.
On the top of that, 25.6 GB/s bandwidth is enough for DDR3-1600 in dual-channel only.
In other words, above 1600Mhz the perfomances boost is close to ZERO.
RAM speed over 1600Mhz does nothing? That WAS true, but not anymore. First of this:
Anandtech:
http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill
xbitlabs:
http://www.xbitlabs.com/articles/memory/display/ivy-bridge-ddr3.html
overclock.net:
http://www.overclock.net/t/1438222/battlefield-4-ram-memory-benchmark
Second, I can messure a real performance difference when using this memory at 2400mhz vs 1600mhz, f.i. Winrar5.01 x64, when searching in reg.database, and other memoryhungry programs. My graphic-card is not powerfull enough to show any difference in games, but almost anything else I _can_ se a difference.
If you honestly can read these 3 links and still say, that memory speed does not matter, I think I know more about this than you
I'm quite sure, that a big place like Anandtech is not payed to show up this result.

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much

Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.

My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
& yes we all have imessage on.

Hi there,
I see that you are having IMessage problems. Some of the problems might be:
- Your friends IMessage is not activated (you have to activiate it with your apple id)
- Your IMessage is not activated
Here is some links to another person`s Imessage problems:
https://discussions.apple.com/message/17301880#17301880
https://discussions.apple.com/message/20142285#20142285
https://discussions.apple.com/message/18988318#18988318
Hope that helps!

How to start wlst in online mode

I'm a first time user of 'wlst' ;-)
I installed the WebLogic Server 9.1 on the HP-UX PA-RISC platform and is running in a production environment.
I can start 'wlst' offline on HP-UX but don't know how to switch back to the online mode.
I'd like to find out if 'wlst' online mode is supported on HP-UX. If it supports on HP-UX, can someone let me know how to start 'wlst' in online mode?
Thanks!
Pearl

When you first invoke WLST, by default you are in "offline" mode. Once you are connected to a server you will be in "online" mode.
Thanks,
-satya
BEA Blog: http://dev2dev.bea.com/blog/sghattu/

Error starting the gateway work process (gwwp)

Hi Gurus,
I have an error in my system when I review the tx sm21, shows me a constant error that says:
Error starting the gateway work process (gwwp)
fork failed, error 002
> \ Gwwp.EXE
This happens after making a copy of the constituents scc9 tx.
Thanks and regards
Tao Gonz.

Hi,
Check below SAP notes & thread link.
604437 GW: Checking of started Gateway work processes 1
116051 Checklist: Problems SNA gateways (R/3 ==> R/2)
71251 Gateway : Versions of dplib are different
92104 Gateway does not work after restart
gateway not starting automatically
Hope this helps you.
Thanks,
Sushil

Photoshop Adobe 3.2 starter edition stopped working

A couple of days ago my Adobe 3.2 starter edition quit working. It asked me to re register then when I did I got an email reply saying that: The Adobe Starter edition is no longer available....What's up with that?

I believe that there is a separate forum on Photoshop Starter, but have to admit that I could not find the link to offer it up to you. It seems that John Joslin has posted it before, as have some others. Maybe your boolean is better than mine, and you'll be able to find the exact forum.
Good luck,
Hunt

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

Cs2 on mini mac won't load starting today -- been working for years

cs2 on mini mac won't load starting today -- been working for years

Follow the instructions in this Adobe document:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

When i open youtube on ff it has started to only work in pulses.

Whenever i open ff on youtube my whole laptop starts to only work in pulses. The best way to describe it. It has only started yesterday. I have tried to use another web browser and no problem. I also tried to open another website and the same problem. I think it only happens with media players on the site. What can i do as i like to use ff?

Hello,
It sounds like you are having a problem with the Flash player plugin.
Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash update and/or a malfunctioning browser plugin such as Real Player.
If the problem only occurs on youtube then I suggest using the HTML5 version of youtube which doesn't require the Flash plugin at all. Click the Join Trial button on this page:
http://www.youtube.com/html5
In order to remedy the flash problem, please perform the steps mentioned in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
* http://forums.adobe.com/thread/1018071?tstart=0
* http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!

Start of planned working time in Time Statement

Hi experts,
I have a issue with Time Statement Form, the problem is that i don't know how to make appear sobeg (Start of planned working time) and soend (End of planned working time)
¿Does anybody know how to solve this?
Regards,
dpungitore.

WPBP is a clauster table which contains the combined data from Infotypes 0, 1, 7, 8 and 27. Hence it also have IT0007 data. You can check the same in cluster results. In WPBP same field is named as DIVGV (Working Hours per Payroll Period) which you can use.
But i i am not sure why it is not wrking with P0007. Can u pls check if you have an entry in T514K as P0007 for your molga.
Also pls check the 'Output length' in the change single field screen.
I have tried with WPBP - DIVGV with output length 10 just to simulate your scenario and it works for me.

Unable to start WLST

Hi,
I am unable to start WLST and throwing "d:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8 was unexpected at this time" error message
OS: Win 7 64-bit version
Java : Java 1.6 64-bit (jdk-6u33-windows-x64.exe)
WL Version : 10.3.6 generic version (wls1036_generic.jar)
While installing Weblogic, I have chosen the Sun JDK.
After successful installation, I changed the nodemanager properties such as startScriptEnabled and stopScriptEnabled as "true". And run the NodeManager and NodeManager started successfully on port 5556.
But while trying to start the Weblogic scripting Tool, it is throwing the error message as
"d:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8 was unexpected at this time"
I have not created any domain and planning to create using WLST script.
Please help.
Thanks,
Ravi

Hi all,
I am also facing the same issue.I am trying to update fusion midddleware shared libraries. For that i need to run
cd oracle_common\common\bin
wlst.cmd upgradeJRF('/DOMAIN_HOME')
While running wlst.cmd file i am getting message in command prompt
D:\OraHome\Middlleware\oracle_common\common\bin>wlst
The input line is too long.
:APPEND_CLASSPATH
was unexpected at this time.
D:\OraHome\Middlleware\oracle_common\common\bin>wlst
The input line is too long.
D:\OraHome\MIDDLL~1\ORACLE~1\common\bin\setWlstEnv.cmd was unexpected at this time.
Kindly guide me regarding this.
Thanks in advance.

Hard start won't work ?

I have the iphone 4 and the hard start will not work and I receive an error message when trying to restore through itunes on my macbook, any other suggestions?

First, check this: Computers that can be upgraded to use OS X Internet Recovery. If you can use Network Recovery, then do the following:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button. Be sure to select the SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Error when trying to start WLST in Jython 2.5 interpreter

Hello!
I try to get WLST working in a standalone jython interpreter.
What i did:
- installed Jython 2.5.4 RC1
- created a startscript for Jython (taken from wlst.sh)
WL_HOME="/opt/oracle/wlserver_10.3"
umask 027
# set up common environment
WLS_NOT_BRIEF_ENV=true
. "${WL_HOME}/server/bin/setWLSEnv.sh"
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${FMWLAUNCH_CLASSPATH}${CLASSPATHSEP}${DERBY_CLASSPATH}${CLASSPATHSEP}${DERBY_TOOLS}${CLASSPATHSEP}${POINTBASE_CLASSPATH}${CLASSPATHSEP}${POINTBASE_TOOLS}"
/export/home/weblogic/jython/bin/jython
- generated the wl.py as mentioned in "http://docs.oracle.com/cd/E13222_01/wls/docs92/pdf/config_scripting.pdf"
wls:/(offline)> writeIniFile("wl.py")
This is the generated file (wl.py):
This is WLST Module that a user can import into other Jython Modules
@author Satya Ghattu
Copyright (c) 2004 by BEA Systems, Inc. All Rights Reserved.
Copyright (c) 2008,2009 Oracle and/or its affiliates. All rights reserved.
WARNING: This file is part of the WLST implementation and as such may
change between versions of WLST. You should not try to reuse the logic
in this script or keep copies of this script. Doing so could cause
your WLST scripts to fail when you upgrade to a different version of
WLST.
from weblogic.management.scripting.utils import WLSTUtil
import sys
origPrompt = sys.ps1
theInterpreter = WLSTUtil.ensureInterpreter();
WLSTUtil.ensureWLCtx(theInterpreter)
execfile(WLSTUtil.getWLSTScriptPath())
execfile(WLSTUtil.getOfflineWLSTScriptPath())
exec(WLSTUtil.getOfflineWLSTScriptForModule())
execfile(WLSTUtil.getWLSTCommonModulePath())
theInterpreter = None
sys.ps1 = origPrompt
modules = WLSTUtil.getWLSTModules()
for mods in modules:
execfile(mods.getAbsolutePath())
wlstPrompt = "false"
- started Jython with the startscript from above
- imported wl.py into the jython interpreter
- got this error:
weblogic@AP4S105# ./start_jython.sh
Jython 2.5.4rc1 (2.5:723492dbab02, Feb 8 2013, 09:50:55)
[Java HotSpot(TM) Server VM (Sun Microsystems Inc.)] on java1.6.0_75
Type "help", "copyright", "credits" or "license" for more information.
>>> import wl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "wl.py", line 17, in <module>
    theInterpreter = WLSTUtil.ensureInterpreter();
        at weblogic.management.scripting.utils.WLSTInterpreter.addModulesFromManifest(WLSTInterpreter.java:252)
        at weblogic.management.scripting.utils.WLSTInterpreter.addModulesFromManifest(WLSTInterpreter.java:246)
        at weblogic.management.scripting.utils.WLSTInterpreter.addWLSModules(WLSTInterpreter.java:220)
        at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:141)
        at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:76)
        at weblogic.management.scripting.utils.WLSTUtil.ensureInterpreter(WLSTUtil.java:157)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
java.lang.NoSuchFieldError: java.lang.NoSuchFieldError: packageManager
Does someone know what I can do to fix this?

Hi guys:
I got exactly the same error. I recently installed BPEL Process Manager for Developers 10g Release 2 (10.1.2) in windows XP.
The default setting for BPEL VM memory is Xms512m -Xmx512m -Xmn300m. I tried to set maximum size to 1024 but I had this error.
Error occurred during initialization of VM
Could not reserve enough space for object heap
if any body can suggest a solution will be great .
Thanks.
Message was edited by:
user533906
Message was edited by:
user533906

Start wlst partialy working.

Similar Messages

Maybe you are looking for