Starting and stopping composites with ant

Hi All,
I am receiving the below error when I try to stop/start a composite using ant script.
export ORACLE_HOME=/apps/oracle/product/fmw/soa
export ANT_HOME=$ORACLE_HOME/../modules/org.apache.ant_1.7.1/
export ANT_BIN=$ORACLE_HOME/bin
PATH=$ORACLE_HOME:$ANT_HOME:$ANT_BIN:$PATH
+$ ant -f $ANT_BIN/ant-sca-mgmt.xml stopComposite -Duser=qetst1user -Dpassword=welcome1 -Dhost=qetst1.corp.netapp.com -Dport=9200 -DcompositeName=ProcessSalesOrderEbizFfmtEventConsumer -Dpartition=Q2I -Drevision=1.0.0+
Buildfile: /apps/oracle/product/fmw/soa/bin/ant-sca-mgmt.xml
[echo] oracle.home = /apps/oracle/product/fmw/soa/bin/..
stopComposite:
[input] skipping input as property host has already been set.
[input] skipping input as property port has already been set.
[input] skipping input as property user has already been set.
[secure-input] skipping secure-input as property password has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
[echo] oracle.home = /apps/oracle/product/fmw/soa/bin/..
compositeMgrTask:
[java] Connecting to: service:jmx:t3://qetst1.corp.netapp.com:9200/jndi/weblogic.management.mbeanservers.runtime
[java] connection initiated
_*[java] Cannot find composite lifecycle mbean.*_
BUILD SUCCESSFUL
Total time: 12 seconds
Thanks,
Harsh Bansal

Hi user11274260,
Thanks for the reply. Can you direct me a way on how to achieve that using wlst as well. Any snippet of code or some other info would be very useful.
Thanks.

Similar Messages

I want cRIO to start and stop acquisition with push of physical button on cRIO, is that possible?

When using my cRIO 9024 on the field, I prefer to be able to start and stop acquisition with push of a physical button on cRIO.
I mean I don't want it to be "as start-up," I don't want cRIO to start acquisition as soon as the power is supplied.
Is that possible?
Solved!
Go to Solution.

Hi Cashany,
you surely can read that switch status. But there are easier (but more expensive) ways to switch a button. Fiddling with a pen or small screwdriver to switch USER1 isn't what I call "user friendly"...
- You have atleast 2 voltage inputs on your module available. Use a switch to supply voltage to those inputs. Use a "real" button!
- You have a serial port available. You could set some pins to GND or voltage and check their status inside cRIO/RT target...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Start and stop movie with key press

Can anyone please tell me how to do this?
I'm very new to flash.
Thankyou

Place this code in the timeline that you are trying to control--pressing and releasing a key will play/stop depending on which mode it is currently in.
stop();
var isPlaying:Boolean = false;
stage.addEventListener(KeyboardEvent.KEY_UP, keyUsed);
function keyUsed(event:KeyboardEvent)
if (isPlaying){
          stop();
     } else {
          play();
isPlaying = !isPlaying;
If you have other questions, try to anticipate what you might be asked and include those details.

Windows script to start and stop jobserver only, with BOXI31

hi,
my question is easy but i have found nothing : on BOXI31
how to start and stop jobserver (adaptive...) automaticaly with windows script ?
in tasklist command, jobserver have no services name...
thank's

In XI R2 you can stop & start job servers by their types, but in XI 3.1 I don't think you can do that, b'cos it doesnt list by server type just shows jobserver for crystal, webi & deski.
Thanks,
Hari

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

Tree node images changes.. with start and stop button

I create the animator extends JPanel, which start and stop can be controlled with Swing Timer. It works fine with animation control over the panel.
Now, I have a tree with each image at each node.
when the start button clicks, one node image should be animated.
It is implementable. If animation.gif would have worked, I did't have to do this, but animation gif has fatal error with time interval.
any words would be appreciated. Thanks =

Damn !
With version 1.2.1 I think you'll have to create a new class that extends PositionPathInterpolator and add a pause() anr resume() method to it.
i suggest something like:
public class MyPositionPathInterpolator() extends PositionPathInterpolator {
// add some constructors if necessary
private float pauseAlphaValue = 0;
// override computeTransform method
public void computeTransform(float alphaValue, Transform3D transform) {
   float newAlphaValue = alphaValue + pauseAlphaValue; // calculate new alpha value
   if(newAlphaValue > 1) // modify it if it is out of bounds
      newAlphaValue -= 1;
   else if (newAlphaValue < 0)
      newAlphaValue += 1;
   super.computeTransform(newAlphaValue, transform); // computeTransform with the right alpha value
public void pause() {
   this.setEnable(false); // it won't compute transform anymore
   pauseAlphaValue = this.getAlpha().value(); // retrieve current alphavalue
public void resume() {
   pauseAlphaValue -= this.getAlpha().value();
   this.setEnable(true) // restart computing transform
}Now you invoke pause and resume methods on your myPositionPathInterpolator object when user clicks on the buttons.
Of course it is a trick and it will work only with increasing alpha.
c ya
GnG

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

Control DC Motor (start and stop) with LabView

I never used Lab View before. For a project, we have to use Lab View to make a small dc motor （HP:1/2， RPM 1725) start, and stop. I have no idea how to do this. Any advice/help anyone? Any tutorial or vi. would help!

Hi there,
Search for “H-bridge” for a common DC motor control circuit, the input terminals from the bridge can be controlled using any DAQ device with digital output lines from LabVIEW. For example: https://decibel.ni.com/content/docs/DOC-17062
Regards,
Alejandro | Academic Program Engineer | National Instruments

With apple pages - how do I start and stop the correction system/ spell and grammar, etc proof reader?

How do I start and stop the corection system - das Korrektursystem/ the program in pages where one mark a text while proff reading it?

Pages version?

Starting and stopping timer using external inputs interfaced with labview

hello,
I have trouble finding how to start and stop the timer using external voltage or current pulse. we are interfacing a circuit to labview. so for that we need to count the time it takes between the two external voltages. We have to keep on comparing the voltages to some reference voltage. And when the external voltage crosses the reference voltage we have to start the timer and again we have to stop the timer using tha same logic. We need it for time calculation between the triggers.
hope you can help.

https://decibel.ni.com/content/docs/DOC-23334 is agood example to start. You need to modify it to include stop trigger.

Start and Stop Trigger using PXI-6120 and DigitalStartAndStopTrigger.vi not working :-(

Hello,
I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
my software as of now.
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.3.0.49152
DAQmx 8.6.0f12
Trad DAQ 7.4.4f7
before I updated I had the same problem but with the following versions:
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.2.1.3001
DAQmx 8.5.0f5
Trad DAQ 6.9.3f4
So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
Many thanks,
Mike

Hi Graham
I'm out of the lab today but I'll try and answer your questions as best I can...
1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
2) Does the program end after the stop trigger is implemented?
Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
3) Lastly can you give me the details of triggering method. Are you
using a digital train of users set digital pulses? how long is the
program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running and then toggle the line high, wait a couple of seconds and then toggle it low.
To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
Any ideas? and thanks for you help,
Mike

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Need help getting Tomcat 5.0.28 to start (and stop, eventually)

Hi!
I am such a newbie to the Terminal and writing scripts, so please forgive my naiveté. I have successfully installed Tomcat in my /usr/local directory, but I am having trouble creating files to start and stop Tomcat, per the instructions on the following page:
http://developer.apple.com/internet/java/tomcat1.html
I've followed the directions but continue to get the following error after I execute ~/bin/start_tomcat.
-bash: start_tomcat: command not found
My file contains the following code:
#!/bin/sh /n
export CATALINA_HOME=/usr/local/jakarta-tomcat-5.0.28 /n
export JAVA_HOME=/usr /n
$CATALINA_HOME/bin/startup.sh /n
If anyone can help me, I would really, really, really appreciate it!
Thanks!
PowerBook G4 12" Mac OS X (10.4.5)

Why are there all those "/n" there? Either you or the place you copied from has the wrong slash. But still, it's wronger than that to have them at all: "\n" means a newline (i.e., press "return") not the actual "backslash en" characters. Sometimes people post code with those \n visible: by making it explicit where a line-break should be, one doesn't have as much trouble when a web browser reformats the text and puts line breaks where they don't belong.

Music starts and stops during playback of burned DVD

I really need help with this problem...I made a slideshow and added music from itunes in the program IDVD. Once I burned the DVD the music will start and stop throughout the DVD and not at chapters as I read in other threads - but in random places on the DVD. The DVD sounds like it gets hung up and then starts again. This is my first project using IDVD, so any help would be great.

Debra,
Do your project have music purchased from iTunes? If so, that could be the cause of this problem. Music from iTunes is DRM-protected and can cause problems in playback. To take care of this, first burn all of your purchased music to a CD, then reimport in an aiff format. To do this, in iTunes, go to iTunes>Preferences>Advanced>Importing. Look for "Import using", and use the drop-down menu to select AIFF encoder.
Good luck.

In Month View, showing start and stop times for appointments

Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave

I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.

Starting and stopping composites with ant

Similar Messages

Maybe you are looking for