Starting Rman getting error PL/SQL package not current

I come across a problem. My server is windows 2003 and Oracle is 10g Release 2.
My previous DBA install Oracle 10g R1, 10gR2 and Oracle Data Warehouse Builder 10g on the same server at different Oracle_Home. When I came to this work. I tried to use Rman for backup. When i went to server command line, type Rman, Rman target /. the error message was:
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.02 in TARGET database is not current and PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.02 in TARGET database is not current.
I found the solution from oracle_metalink ( Note:429499.1). I followed note to use Oracle Universal Installer to move the 10.2.0.2 home. Then I can start Rman. Then I fixed some other small errors. I came back to loginto Rman. The system told me the same errors. I used Oracle Installer to check the Oracle_Home. Only two home exist. One is 10gR2 10.2.0.2. Another one is data warehouse builder with version 10.2.0.3. So it seems that 10gR2 Home is not current. How can I remove this Oracle_Home? If I remove it off, database will be dead. So if I remove oracle data warehouse builder, will it make two PL/SQL package for Rman current? or I have to remove DW builder first, then patch 10gR2 Home to 10.2.0.3? Please help. Thanks.

damorgan:
No. it is not related to oracle_home and oracle_sid. It is related to PATH setting. I have solved the problem. Thanks for your comment.

Similar Messages

Can't register a database in RMAN catalog (PL/SQL package not current)

Hi RMAN experts. I'm trying to register a 10.2.0.1.0 database into a 10.2.0.5.0 RMAN catalog but I get the following error (Note: following was done on the rman server machine, ORACLE_SID=rman, target database is remote)
$ rman catalog rman/rman target sys@MPOWER
Recovery Manager: Release 10.2.0.5.0 - Production on Sat Apr 30 12:54:16 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not current
connected to target database: MPOWER (DBID=**********)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
RMAN-00571: ===============
RMAN-00569: =========ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-00904: : invalid identifier
Basically the error says that there are two packages in the TARGET database (SYS.DBMS_BACKUP_RESTORE and SYS.DBMS_RCVMAN) which are not compatible with the RMAN catalog.
I cannot register the target database into the RMAN catalog.
I highly appretiate if you give me an advice on this.
Regards

user13064912 wrote:
Hi RMAN experts. I'm trying to register a 10.2.0.1.0 database into a 10.2.0.5.0 RMAN catalog but I get the following error (Note: following was done on the rman server machine, ORACLE_SID=rman, target database is remote)
$ rman catalog rman/rman target sys@MPOWER
Recovery Manager: Release 10.2.0.5.0 - Production on Sat Apr 30 12:54:16 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not current
connected to target database: MPOWER (DBID=**********)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
RMAN-00571: ===============
RMAN-00569: =========ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-00904: : invalid identifier
Basically the error says that there are two packages in the TARGET database (SYS.DBMS_BACKUP_RESTORE and SYS.DBMS_RCVMAN) which are not compatible with the RMAN catalog.
I cannot register the target database into the RMAN catalog.
I highly appretiate if you give me an advice on this.
RegardsCould you try to run the rman at the target database server (MPOWER), instead of rman catalog server ant try to register your database?
Your rman client is higher than your target server. That could be the problem.
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

RMAN-10006: error running SQL statement: alter session set remote_dependenc

Backups are failing with following error
RMAN-00554: initialization of internal recovery manager package failed
RMAN-12001: could not open channel default
RMAN-10008: could not create channel context
RMAN-10002: ORACLE error: ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must be from among MANUAL, AUTO
RMAN-10006: error running SQL statement: alter session set remote_dependencies_mode = signature
Not able to change to signature
SQL> alter session set remote_dependencies_mode=signature;
ERROR:
ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must
be from among MANUAL, AUTO
I dont see MANUAL or AUTO as valid value for this parameter (http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1175.htm#1023124) DB version is 9.2.0
Parameter type
String
Syntax
REMOTE_DEPENDENCIES_MODE = {TIMESTAMP | SIGNATURE}
Default value
TIMESTAMP
Parameter class
Dynamic: ALTER SESSION, ALTER SYSTEM
=======================================
I believe it could be because of following bug
"A PRE-PATCHED ORACLE IMAGE CAN BE INSTALLED IN MEMORY "
Refer: "https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1613505143885559758::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,4610411,1,1,1,helvetica"
I appreciate your effort in fixing this issue.
Edited by: user10610722 on Nov 25, 2008 4:37 PM

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

HT201299 Verizon signal is strong but get error message "Ipad is not connected to the Internet"   Wireless works but my Verizon account does not

Verizon signal is strong but get error message "Ipad is not connected to the Internet"   When I try to use Safari.
Wireless works but my Verizon account does not

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Reader 10.1.7 Windows xp, can't access at all just get message the patch package not recognised

Reader 10.1.7 with windows xp, can't access at all, or remove , just get message that patch package not recognised. Or else Runtime error Help please

Uninstall the corrupted Reader installation using http://labs.adobe.com/downloads/acrobatcleaner.html
then reinstall the latest version from http://get.adobe.com/reader/enterprise/

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps

Why do I get "error code 3: Could not load front panel" when I run my executable.

I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
Unfortunately I do not have access to the internet at my jobsite so bear with me.
Rob

Hi V-rob,
I'm glad to hear the executable is working now that NI-VISA is installed. Thanks for posting the solution!
Jennifer R.
National Instruments
Applications Engineer

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Getting error logical file name not maintained adequtely

Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'DOWNL'.
Determine and construct OS specific file name                        *
        PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
                           pf_with_file_extension
                           pf_param_1
                           pf_format
                           pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in    *
download file name                                                   *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
CLIENT                        = SY-MANDT
      logical_filename              = 'Z_MATERIAL_BOM_FILE'
      operating_system              = pf_os
      parameter_1                   = lf_para1
PARAMETER_2                   = ' '
PARAMETER_3                   = ' '
USE_PRESENTATION_SERVER       = ' '
      with_file_extension           = pf_with_file_extension
USE_BUFFER                    = ' '
    IMPORTING
EMERGENCY_FLAG                =
    file_format                   = pf_format
    file_name                     = pf_fname
EXCEPTIONS
   file_not_found                = 1
   OTHERS                        = 2
Error handling.
CASE sy-subrc.
    WHEN '1'.
      MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
    WHEN '2'.
      MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
      LEAVE.
ENDCASE.

Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani

Getting error in Hiring " Partner not assigned to applicant".

Hi
Getting error in hiring " partner not asisgned to applicant". Is any thing missing from erecruitment system. Any infotype not getting updated etc. Kindly provide any solution to this? We have checked the relationship of NA-CP-BP and it has unique ids. We are finding 2 person holding the perner in production because of this. Attach is the screen shot.
Regards,
Sarvada Redkar.

Hi Sarvada,
The error message is strange - where do you get that exactly? Any additional information for that in transaction SLG1?
Regards,
Nicole

Starting Rman getting error PL/SQL package not current

Similar Messages

Maybe you are looking for