Starting SOAMANAGER from Application server Problem

Hello,
  We can get SOAMANAGER to start when attached to the Database server in our ERP2006 running with Oracle on Solaris, but when we are running on one of the Application servers we can not get SOAMANAGER to start.  Is there some parameter or setup that is needed to get this to work from one of the Application Servers?
Thanks,
Dan Adams

Hi,
Is the ICM started on your Application servers ? If not, SOAMANAGER will not run when launched from an appserver because the URL is genrated with the hostname of the appserver.
On my system where ICM is started on CI and DIA servers, SOAMANAGER runs from every server.
Regards,
Olivier

Similar Messages

  • Problem in uploading file from Application Server

    Hi everyone,
    i got a problem in uplaoding a file from application server.i am having two folder (one folder name is current and another one is processed)in application server. In current folder i am having N no of files.I want to upload all the files names into one internal table and i want to process one by one file.After processing each file the file should be moved to processed folder and the files should not exist in current folder.All these process must be done everyday.Please rectify my problem asap.

    Ramesh,
    Take authorization from basis guy.
    Use the below code to get the list of files from require directory
    *& Report  ZDIRFILES                                                   *
    REPORT  ZDIRFILES    .
    PARAMETER: p_fdir            type pfeflnamel DEFAULT '/usr/sap/tmp'.
    data: begin of it_filedir occurs 10.
            include structure salfldir.
    data: end of it_filedir.
    *START-OF-SELECTION
    START-OF-SELECTION.
    Get Current Directory Listing for OUT Dir
      call function 'RZL_READ_DIR_LOCAL'
           exporting
                name     = p_fdir
           tables
                file_tbl = it_filedir.
    Now in internal table "it_filedir"  will have all your files.
    For moving and deleting
    report zrich_0001.
    Parameters: d1 type localfile default '/usr/sap/TST/SYS/fld1/Data1.txt',
                d2 type localfile default '/usr/sap/TST/SYS/fld2/Data1.txt'.
    data: begin of itab occurs 0,
          rec(20) type c,
          end of itab.
    data: wa(20) type c.
    start-of-selection.
      open dataset d1 for input in text mode.
      if sy-subrc = 0.
        do.
          read dataset d1 into wa.
          if sy-subrc <> 0.
            exit.
          endif.
          itab-rec = wa.
          append itab.
        enddo.
      endif.
      close dataset d1.
      open dataset d2 for output in text mode.
      loop at itab.
        transfer itab to d2.
      endloop.
      close dataset d2.
      delete dataset d1.
    Check below FM if required
    To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
    To Delete 'EPS_DELETE_FILE'.
    Don't forgot to reward if useful

  • Problem  in reading file from application server

    while reading the file from application server i am succesful in reading from dataset but the program gets terminated giving a runtime error "CONVT_CODEPAGE".
    the code written is as below :
    open dataset d1 for input in text mode encoding default.
    IF sy-subrc NE 0.
    EXIT.
    ENDIF.
    do.
                    Read dataset d1 into btab.
         if sy-subrc <> 0.
         exit.
                   else.
                   condense btab NO-GAPS.
                   wtt_text-text1 = btab-wa+0(10).
                   wtt_text-text2 = btab-wa+10(1).
                   wtt_text-text3 = btab-wa+11(3).
                  append wtt_text.
                  clear wtt_text.
                  wt_counter = wt_counter + 1.
                  ENDIF.
    enddo.
    write : /10 ' number of records :'.
    write :  wt_counter.
    kindly help me asap.
    regards,
    rachu.

    If I am not wrong you are working on a Unicode enabled system. That is why this error is coming.
    Look at the link below, where the solution is provided.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/content.htm
    open dataset DSN in text mode for output encoding utf-8.
    Regards,
    Ravi
    Note - Please close the thread by selecting PROBLEM SOLVED against the answer which helped your most, if the issue is resolved.

  • Problem with pdf display downloaded from application server

    Hi all,
    I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
    I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
    Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
    However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
    I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
    I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
    Regards,
    Sasi
    Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

    used a program to read the file from appl server and then downloading it to desktop.

  • Problem while dowloading the file from Application Server

    Dear Experts,
                 I am facing the Problem while downloading the file from Application server.
    We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
    I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
    But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
    Please help me to solve this issue.
    Thanks & Regards,
    Srini

    but our user will use the Txn. AL11 and they will download from there
    Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
    I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
    You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
    Hope i'm clear.
    BR,
    Suhas

  • Problem during retriving file from application Server

    Hi all,
    i am trying to upload a world file (from desktop ) on application server and
    retrieve it back on local desktop.
    during retrieval of file from application server i am getting all the data in encoded format .
    i am using -
    open DATASET p_fpath for output in text mode encoding UTF-8 WITH SMART LINEFEED.
    plz help.

    Hi,
    use the tcodes CG3Y and
    CG3Z
    Or
    try with this command
    open DATASET p_fpath for output in text mode encoding default.
    Regards,
    nagaraj

  • Problem while downloading data from Application server.

    Hi
    I have create a file on the application server.
    When i tried to download the file from application server into Excel file , all the fields in the file appear in the same column.
    How can place the fields separately in different columns in the Excel.
    Thanks
    Subha
    Edited by: subhacp on Sep 5, 2011 8:32 AM

    Hi,
    Try to use below function module where you need not to do anything new, just give path of the directory where you want to store on your workstation in the parameter  I_FILE_FRONT_END  and give path of your application server from where you want to pick file which is in .XLS format in the FM parameter I_FILE_APPL  .
    It will simply copy the file from Apllication server to your workstation in the same format and with the same characters.
    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
      EXPORTING
        I_FILE_FRONT_END          = pr_down
        I_FILE_APPL               = l_w_file
        I_FILE_OVERWRITE          = 'X'
    * IMPORTING
    *   E_FLG_OPEN_ERROR          =
    *   E_OS_MESSAGE              =
    EXCEPTIONS
       FE_FILE_OPEN_ERROR        = 1
       FE_FILE_EXISTS            = 2
       FE_FILE_WRITE_ERROR       = 3
       AP_NO_AUTHORITY           = 4
       AP_FILE_OPEN_ERROR        = 5
       AP_FILE_EMPTY             = 6
       OTHERS                    = 7
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Hope it will solve your query.

  • Prining problem from application server

    dear all
    i m unable to send print from application server,while i can print from DB server
    on application server i restarted print spool service from service.msc, but all in vain.
    plz tell me how can i resolve that issue
    Best Regard
    Imran

    Hi....
    when i check through sp01 , it given error in detail as
    desciption      values
    Status :         Incorrect (Error in ABAP pocessing)
    job status:      completed
    area :             Data transfer
    error :             cannot call ABAP Function
    Also tell me
    how can i add spool work process on apps server,
    regard

  • How to delete the Generated files from application server(open hub)?

    hi experts,
    when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
    when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
    so to delete the generated file from application server, how to delete it for specific dates?
    Information on where terminated
    Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
    "START_ROUTINE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 2874
    of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
    The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
    and when i check the dump it is point out at below code
    " Populate the lookup table for 0STOR_LOC
    SELECT * from /BI0/TSTOR_LOC
    into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
    FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
    STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
    but the programme is syntactically correct only.
    how to rectify the issue.
    regards
    venuscm
    Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

    hi experts,
    We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
    here is the code written in the Transformations
    In the global section
    Text for 0STOR_LOC
        DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
              WITH UNIQUE KEY stor_loc.
        DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
    and in the code to get the text
    " Populate the lookup table for 0STOR_LOC
        *SELECT * from /BI0/TSTOR_LOC*
          into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
          FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
                  STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
    im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
    thanks
    venuscm
    Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

  • How to bring the data from application server to presentation server

    hi,
    i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this  topic.folowing is the code .
    *& Report  ZPFA_HIER_LOAD
    REPORT  ZFPA_HIER_LOAD.
    *---- Declaration of Oracle connectioN
    DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
    DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
    DATA : mfilename type string.
    data: begin of matab1 occurs 0,
          MFL1(9) TYPE C,
          MFL2(5) TYPE C,
          MFL3(9) TYPE C,
          MFL4(2) TYPE C,
          MFL5(8) TYPE C  ,
         end of matab1 .
    data: setid(8) type c.
    data: begin of source occurs 0,
          setid(8) type c,
          end of source.
    *PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
    *PARAMETERS : m_bsenty(8). " type c obligatory.
    *mfilename = P_PFILE.
    EXEC SQL.
      SET CONNECTION :con_name
    ENDEXEC.
    EXEC SQL.
      CONNECT TO :con_name
    ENDEXEC.
    EXEC SQL PERFORMING get_source.
      SELECT set_id FROM UNIT_SET INTO
      :setid
      ORDER BY SET_ID
    ENDEXEC.
    start-of-selection.
    LOOP AT SOURCE.
      REFRESH matab1. CLEAR matab1.
      EXEC SQL PERFORMING evaluate.
    SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
    :MFL5
    where set_id = :SOURCE-SETID ORDER BY MEM_ID
      ENDEXEC.
      if SOURCE-SETID = '80000000'.
       mfilename = '/tmp/aesorg'.
      elseif SOURCE-SETID = '80000006'.
       mfilename = '/tmp/Consolidation_Manager'.
      elseif SOURCE-SETID = '80000010'.
       mfilename = '/tmp/10org'.
      elseif SOURCE-SETID = '80000012'.
       mfilename = '/tmp/20org'.
      elseif SOURCE-SETID = '80000018'.
       mfilename = '/tmp/30org'.
      elseif SOURCE-SETID = '80000025'.
       mfilename = '/tmp/40org'.
      Endif.
      mfilename = '/usr/test.dat'.
    ************************This was i tried***********************
      open dataset mfilename for output in text mode encoding default." IN
    *TEXT MODE ENCODING DEFAULT.
    if sy-subrc <> 0.
    exit.
    endif.
    close dataset mfilename.
    CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
         FILENAME         = MFILENAME
         FILETYPE         = 'ASC'
       TABLES
         data_tab         = matab1
       EXCEPTIONS
         file_write_error = 1
         invalid_type     = 2
         no_authority     = 3
         unknown_error    = 4
         OTHERS           = 10.
    loop at matab1 .
    transfer matab1 to mfilename.
    endloop.
      clear matab1.
    ENDLOOP.
    loop at matab1 .
    transfer matab1 to mfilename.
    endloop.
    close dataset mfilename.
         MFL5 = '0'.
       CLEAR MFL5.
    FORM evaluate.
      if MFL5 = -1.
        MFL5 = ''.
      ENDIF.
      concatenate MFL1 ','   into MFL1.
      concatenate MFL1 ','   into MFL3.
      matab1-MFL1 = MFL1.
      matab1-MFL2 = 'ZBUE,'.
      matab1-MFL3 = MFL3.
      matab1-MFL4 = ' ,'.
      matab1-MFL5 = MFL5.
      append matab1 .
      CLEAR MFL1.
      CLEAR MFL2.
      CLEAR MFL3.
      CLEAR MFL4.
      CLEAR MFL5.
    ENDFORM.
                     "evaluate
    *&      Form  GET_SOURCE
          text
    FORM GET_SOURCE.
      source-setid = setid.
      append source.
      clear source.
    ENDFORM.                    "GET_SOURCE

    Hi Rammohan,
    You cannot use OPEN DATASET to transfer data from application server to presentation server.
    You can do the following :
    <b>Do 1st point in BACKGROUND</b>
    1. Read the data file from application server into an internal table using OPEN DATASET
    <b>Do 2nd point in Foreground</b>
    2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
    You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
    Best regards,
    Prashant

  • TRANSFER OF DATA FROM APPLICATION SERVER TO REPORT

    I have a file on application serverin T-code AL11(sap directories).I want to bring the data from this file to my report.
    Please explain me procedure with example.
    I approached below method:
    I approached with OPEN DATASET,But i got short dump.
    syntax:
    open dataset c_dset(file in app.svr.) for output in text mode
    encoding default.
    transfer c_dset to i_transfer(itab).
    close dataset.
    short dump:
    unable to open file "".
    Kindly solve my problem.

    Hi Saritha,
    If I am not wrong u r trying to read the data from the file which is on  the apps server rite?
    Use open data set with input for reading the file from application server ..........  output is to write the file onto the application server
    check the below sample code.......
    DATA:
    len TYPE i,
    text(30) type c,
    dir(30) TYPE c VALUE '/tmp/test.txt'.
    DATA: begin of data OCCURS 0,
    matnr type matnr,
    werks type werks_d,
    end of data.
    START-OF-SELECTION.
    CLEAR: text.
    OPEN DATASET dir FOR INPUT IN TEXT MODE.
    DO.
    READ DATASET dir INTO text.
    IF SY-SUBRC 0.
    EXIT.
    ENDIF.
    close dataset.

  • Urgent - Append data to internal table from Application server

    Hi All,
    I encountered the problem while read the input file from Application server...then append it to internal table. I manage to read the input file from presentation and append the data to internal table.
    Below are my coding which cause me not able the append data from Application server. Please kindly help me to solving/correct my coding. Thanks in advance .
    PARAMETERS : p_inpfl LIKE rlgrap-filename.  "Material Input File
    SELECTION-SCREEN BEGIN OF LINE.
    Application Server
    SELECTION-SCREEN COMMENT 1(19) text-002 FOR FIELD rb_ux.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: rb_ux RADIOBUTTON GROUP g1.
    Presentation Server
    SELECTION-SCREEN COMMENT 40(21) text-003 FOR FIELD rb_pc.
    SELECTION-SCREEN POSITION 65.
    PARAMETERS: rb_pc RADIOBUTTON GROUP g1 DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN  SKIP.
    SELECTION-SCREEN END OF BLOCK b01.
    FORM f_Input_file.
      CLEAR: v_f_exists.
      CHECK NOT p_inpfl IS INITIAL.  "input file exist
      IF NOT rb_pc IS INITIAL.  " Pc check
        PERFORM f_read_tab_delimited_file TABLES i_input
                               USING    c_09
                                        p_inpfl
                                        rb_ux
                               CHANGING v_ifile_str_with_tab
                                        v_f_exists
                                        v_ifile_record_count
                                        v_message.
        IF v_f_exists EQ '1' .
      UPLOAD FILE could not be read
          MESSAGE e546 .
        ENDIF .
        IF v_ifile_record_count EQ 0 .
      Zero records in upload file
          MESSAGE e547 .
        ENDIF.
      ELSE.
        OPEN DATASET p_inpfl FOR INPUT IN TEXT MODE.
        DO.
          READ DATASET p_inpfl INTO i_input.
          IF sy-subrc EQ 0.
            APPEND i_input.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        CLOSE DATASET p_inpfl.
      ENDIF.

    Hi,
    Refere the following code for the poulating internal from the application server.
    PARAMETERS :  pr_sfile TYPE  filename-fileintern,
    Here give the logical file name from the application serevr.
    data :        w_param_1 LIKE  filename-fileintern,
                   x_file(500),
                   w_move_file LIKE  epsf-epsfilnam,
                   w_from_dir  LIKE epsf-epsdirnam,
                   w_path LIKE rlgrap-filename,
                  input_line(1000),
                  w_path LIKE rlgrap-filename,
                  w_file LIKE rlgrap-filename,
                  w_dir LIKE  rlgrap-filename,
                  w_dir1 LIKE epsf-epsdirnam,
                  w_file1 LIKE  epsf-epsfilnam,
    **************Start of the code***************
      MOVE '*' TO w_param_1.
      PERFORM get_file_name USING pr_sfile w_param_1.
        LOOP AT it_file WHERE name CP w_file1.
          CLEAR : x_file, w_path,
                  w_move_file, w_from_dir.
          REFRESH : it_input,
                    it_input_err.
       IF w_flag IS INITIAL.
          CONCATENATE w_dir it_file-name INTO x_file.
          CONDENSE  x_file.
    TO Move file from sever for backup storing the file name and path
          w_path = x_file.
          CALL FUNCTION 'TRINT_SPLIT_FILE_AND_PATH'
            EXPORTING
              full_name     = x_file
            IMPORTING
              stripped_name = w_move_file
              file_path     = w_from_dir
            EXCEPTIONS
              x_error       = 1
              OTHERS        = 2.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    ********here it_input will be the structure of the file present on the application server
          PERFORM read_file TABLES it_input
                            USING  x_file.
          CLEAR it_input_err.
          REFRESH it_input.
        ENDLOOP.
    *******************end of the code****************
    *&      Form  read_file
          text
         -->P_X_FILE  text
    FORM read_file  TABLES it_tab
                    USING  x_file.
      OPEN DATASET x_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        WRITE : / text-006.
      ELSE.
        DO.
          READ DATASET x_file INTO input_line.
          IF sy-subrc = 0.
            CLEAR: it_input, count.
            DO.
              ADD 1 TO count.
              ASSIGN COMPONENT count OF STRUCTURE it_tab TO <fs>.
              IF sy-subrc = 0.
                SPLIT input_line AT separator INTO <fs> input_line.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            APPEND it_tab.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
      ENDIF.
      CLOSE DATASET x_file.
    *&      Form  get_file_name
          text
         -->P_P_SFILE  text
         -->P_W_PARAM_1  text
    FORM get_file_name USING    p_sfile
                                w_param_1.
                               CHANGING x_file.
      CALL FUNCTION 'FILE_GET_NAME'
        EXPORTING
          client           = sy-mandt
          logical_filename = p_sfile
          parameter_1      = w_param_1
        IMPORTING
          file_name        = x_file
        EXCEPTIONS
          file_not_found   = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      w_path = x_file.
      CALL FUNCTION 'TRINT_SPLIT_FILE_AND_PATH'
        EXPORTING
          full_name     = w_path
        IMPORTING
          stripped_name = w_file
          file_path     = w_dir
        EXCEPTIONS
          x_error       = 1
          OTHERS        = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      w_dir1 = w_dir.
      w_file1 = w_file.
      CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
        EXPORTING
          dir_name               = w_dir1
          file_mask              = w_file1
        TABLES
          dir_list               = it_file
        EXCEPTIONS
          invalid_eps_subdir     = 1
          sapgparam_failed       = 2
          build_directory_failed = 3
          no_authorization       = 4
          read_directory_failed  = 5
          too_many_read_errors   = 6
          empty_directory_list   = 7
          OTHERS                 = 8.
      IF sy-subrc <> 0.
        WRITE : / text-006.
      ENDIF.
    Hope this will help you.

  • Could not start Sun Java Application Server

    Hi ,
    I have been using JSC for a while, now and then it reports an error " could not start sun java application server...". Does any one know why it s not able to start java application server..
    Before you say anything, I have tried
    1. use netstat to find any port conflicts.
    2. Tried to start application server manually
    3. shut down and start studio creator and then try running the project
    4. shut down and start PC
    unfortunately none of them helped
    Only reinstalling resolved the problem. But I cant keep reinstalling very often.
    Does any one know the permanent solution for this problem.
    Cheers
    kush

    Sometimes it appears this is a timeout issue because it's taking too long to come up. As Jonathan says, undeploy can help with this (along with his other suggestions).
    How many deployed projects do you see (in the server navigator you can open up the deployed server and see what's out there)?
    I periodically undeploy "junk" projects that I'm not really using because they slow down the server startup (same thing happens I believe for tomcat... when the server starts it has to load them all and it takes awhile). You can undeploy from within the server navigator by drilling into the server nav and right clicking on the deployed app and choosing undeploy... or you can use the server admin tool.
    hth,
    v

  • Use of Open and close data set in to pick up files from application server

    Hi,
    As per my earlier posts i m making a programm which will pick excel sheet from application server and make auto PR by bapi and this all process will be handle by background processing (SM36, SM37). My concer is all proces are working fine but my files are not been picked by application server , when run on my own machine everything is working fine.I never used OPENDATA SET command before , so i have no idea how it will be used , can anyone provide me details with my set of codes where it should be used ....
    sou_dir_name = 'Y:\Sucess\'.
    tar_dir_name = 'Y:\destination\'.
    Open dataset sou_dir_name for input in text mode encoding default.
    if sy-subrc eq 0.
       do.
           read dataset sou_dir_name into file_table.
       if sy-subrc ne 0.
         exit.  " end of file.
    enddo.
    endif.
    CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
      EXPORTING
        DIRECTORY  = sou_dir_name
        FILTER     = '.'
      IMPORTING
        FILE_COUNT = file_count
        DIR_COUNT  = dir_count
      TABLES
        FILE_TABLE = file_table
        DIR_TABLE  = dir_table
      EXCEPTIONS
        CNTL_ERROR = 1
        OTHERS     = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
    loop at file_table into wa_file_table.
    clear  :  strr , str1 , str2 , str3 .
      strr = wa_file_table-PATHNAME .
      concatenate sou_dir_name strr into str1 .
      concatenate tar_dir_name strr into str2 . " success
      concatenate tar_dir_name1 strr into str3 .         " failed
    FILE = STR1 .
    *start-of-selection.
    *&  Function For Retrieve Data From Excel
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        filename                      = FILE
        i_begin_col                   = col_start
        i_begin_row                   = row_start
        i_end_col                     = col_end
        i_end_row                     = row_end
      tables
        intern                        = excel_bdcdata
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3.
      IF sy-subrc NE 0.
    WRITE : / 'File Error'.
    EXIT.
    ENDIF.
      loop at excel_bdcdata.
        translate excel_bdcdata to upper case .
        move excel_bdcdata-col to it_index.
        assign component it_index of  structure  wa_file to <fs> .
        move excel_bdcdata-value to <fs>.
        at end of row.
          append wa_file to it_file .
            clear wa_file.
          endat.
      endloop.

    Parsing XML data:
    http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
    or alternatively check out ABAP online help for "CALL TRANSFORMATION".
    For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
    Thomas

  • File from application server-- Email ?

    Hi,
    I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
    For that i had used the following code:
    REPORT  ZEMAIL_APP_SER_FAIL.
    DATA :is_doc_chng        TYPE sodocchgi1,
          it_objtxt          TYPE STANDARD TABLE OF solisti1,
          is_objtxt          TYPE solisti1,
          it_objpack         TYPE STANDARD TABLE OF sopcklsti1,
          is_objpack         TYPE sopcklsti1,
          it_objbin          TYPE STANDARD TABLE OF solisti1,
          is_objbin          TYPE solisti1,
          it_reclist         TYPE STANDARD TABLE OF somlreci1,
          is_reclist         TYPE somlreci1,
          w_lines_tx         TYPE i.
    ** Create Message Body
    **   Title and Description
    *is_doc_chng-obj_name  = 'MAIL'.
    is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
    ** main text
    is_objtxt-line = 'This is an automatically generated mail. Please do not reply  to it.'(028).
    APPEND is_objtxt TO it_objtxt.
    is_objtxt-line = space.
    APPEND is_objtxt TO it_objtxt.
    *   write packing list (main)
    DESCRIBE TABLE it_objtxt LINES w_lines_tx.
    READ     TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
    is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
    CLEAR is_objpack-transf_bin.
    is_objpack-head_start = 1.
    is_objpack-head_num   = 0.
    is_objpack-body_start = 1.
    is_objpack-body_num   = w_lines_tx.
    is_objpack-doc_type   = 'CVS'.
    is_objpack-OBJ_NAME   = 'GIND_EXP'.
    is_objpack-Obj_langu  = 'E'.
    APPEND is_objpack TO it_objpack.
    is_reclist-receiver = 'XXX'@'YYY'.COM'.
    is_reclist-rec_type = 'A'.
    Break-point.
    *is_reclist-REC_ID   =  'XXX@YYY'.COM'.
    APPEND is_reclist TO it_reclist.
    CLEAR is_reclist.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
       document_data              = is_doc_chng
       put_in_outbox              = 'X'
       commit_work                = 'X'
    TABLES
       packing_list               = it_objpack
       contents_txt               = it_objtxt
       receivers                  = it_reclist
    EXCEPTIONS
       too_many_receivers         = 1
       document_not_sent          = 2
       document_type_not_exist    = 3
       operation_no_authorization = 4
       parameter_error            = 5
       x_error                    = 6
       enqueue_error              = 7
       OTHERS                     = 8.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    when i execute this program:
    I get the following error msg:
    Activation setting not yet maintained
    May i know what is the problem?

    If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?

Maybe you are looking for