Starting Weblogic 6.1 failure extracting WAR classes file access denied

When I start Weblogic I get following error
<[WebAppServletContext(4057696,cert ificate,/certificate)] failure extracting WAR classes java.io.IOException: Permission denied at java.io.UnixFileSystem.createFileExclusively(Native Method) at java.
When I am shutting down weblogic with following command
java weblogic.Admin -url 10.170.80.140:7001 SHUTDOWN -username system -password mydomainIt is not shutting down properly
It does not show following message
E:\bea\wlserver6.1>goto finish
E:\bea\wlserver6.1>cd config\mydomain
E:\bea\wlserver6.1\config\mydomain>ENDLOCAL
which normally it should.

Hi.
Not sure what could be the cause. Are you running the latest service pack (sp2)? If not
please upgrade and try again. You might also check rwx permissions on the war file and
the directories.
Regards,
Michael
Alex wrote:
Hi there,
I'm getting several error-messages when starting my weblogic 6.1 saying:
<Jan 10, 2002 9:07:32 AM CET> <Error> <HTTP> <[WebAppServletContext(4057696,cert
ificate,/certificate)] failure extracting WAR classes java.io.IOException: Permission
denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
etc...
but the server is running and the applications work fine. Should I just ignore
the error-messages or how can I avoid them?
Any help is appreciated
thanx
Alex--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

Starting Weblogic 6.1 failure extracting WAR classes

Hi there,
I'm getting several error-messages when starting my weblogic 6.1 saying:
<Jan 10, 2002 9:07:32 AM CET> <Error> <HTTP> <[WebAppServletContext(4057696,cert
ificate,/certificate)] failure extracting WAR classes java.io.IOException: Permission
denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
etc...
but the server is running and the applications work fine. Should I just ignore
the error-messages or how can I avoid them?
Any help is appreciated
thanx
Alex

Hi.
Not sure what could be the cause. Are you running the latest service pack (sp2)? If not
please upgrade and try again. You might also check rwx permissions on the war file and
the directories.
Regards,
Michael
Alex wrote:
Hi there,
I'm getting several error-messages when starting my weblogic 6.1 saying:
<Jan 10, 2002 9:07:32 AM CET> <Error> <HTTP> <[WebAppServletContext(4057696,cert
ificate,/certificate)] failure extracting WAR classes java.io.IOException: Permission
denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
etc...
but the server is running and the applications work fine. Should I just ignore
the error-messages or how can I avoid them?
Any help is appreciated
thanx
Alex--
Michael Young
Developer Relations Engineer
BEA Support

Failure extracting WAR classes when starting weblogic server

I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
./config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
Linden

Hi
This is a Unix problem, you may check if you have all the permissions.
I suspect that some of the files which may be owned by someone other than user-value and therefore preventing the writting to the
files.
Can you check the files owership under /usr/local/bea/wlserver6.1/config/mydomain/applications/.wlnotdelete to see if any of the
files or subdirectories are owned by someone else, such as 'root' or even under different group?"
Hope this help
JFG
Linden Lu wrote:
I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
/config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
Linden

Failure extracting WAR classes

Hi,
I am not sure whether this is the right forum... but I guess somebody here should be able to answer my question. I am deploying a war file on Weblogic 6.1 on Solaris. But when I start Weblogic after deploying the application, I get the error :
<Sep 16, 2002 6:31:52 AM GMT-05:00> <Error> <HTTP> <WebAppServletContext(100251,certificate,/certificate)] failure extracting WAR classes
java.io.IOException: Permission denied
I tried changing the permissions on the war file... even that did not help... Can anybody please help me?
Thanks in advance...
Nish

Hey even i am getting the same error in Solaris 8 and
weblogic 6.1.
Can anyone tell why i am getting this error.It is
urgent .
Thanks in advance.
You likely started Weblogic as another user at one point (perhaps root).
Change ownership of all files in $WL_HOME/server/bin/myserver/.wlnotdelte to the user you would like to start weblogic and try again.

Just started getting error messages: "error in trying to open this file, access denied"

Can anyone help? Just started to get error messages: "error in trying to open this file, access denied" This ha-ppens when trying to open PDF attachemnts to e-mail, something we have been doing for years. No new softare had been loaded recently so I can't explain what is happening. Anyone with any insight in to this situation?

What OS and Adobe Reader version are you using. Also what e-mail application are you using.

How can i extract war a file

hello, How can i create or extract a war file

If you are using the command line and the $JAVA_HOME/bin directory is in your path environment variable (where $JAVA_HOME is the location of your base Java installation directory), use the following command:
jar cvf webapp.war ./webapp/The jar tool (short for Java ARchive) behaves similarly to the Unix tar tool (short for Tape ARchive) except that it works with .zip .jar or .war instead of .tar files (war is short for Web ARchive).
To update an existing webapp, use something like:
jar uvf ExistingWebApp.war newFile.classIf your using Microsoft Windows XP and don't have access to a good command line, or don't have access to a java installation, you can just highlight the files you want to be in the archive, right click on them, and select "Send To" > "Compressed (zipped) Folder". The file will be created with a .zip extension and you can just rename it with a .jar extension.

How to control class file access

Hi
I am developing an application in java. I am keeping only one class where the user has to enter valid password. different classes are called later as soon as the user run the application. I guss, any one can access other class even those has not main class by way of writing a new class having main method and calling all other class from that class. Will any one suggest how do I protect it?
Thanks in advance

package mypackage;
public class myEntryClass { // public as this class is the only one that is to be used by others
private boolean isLoggedIn; // no one can change this value except myEntryClass
public myEntryClass() {
public final void login(String user, String password) { //anyone can attempt to login - the mehod may not be overridden however by subclasses as it is final
if ( /* check if username and password is ok */ ) {
this.isLoggedIn = true;
public void callAMethod() { // anyone logged in may do so
if (this.isLoggedIn) {
AnotherClass.aMethod();
package myPackage;
class AnotherClass { // package/default visibility
static void aMethod() { // package/default visibility
// do something
Hope that helps
rh

Visual Studio Online Build Failure - Unable to copy file, access to directory is denied

Hi,
I have an ASP.Net Web Site that compiles and builds with no errors on my local machine.
However when I attempt to build the site using default build definitions/configurations within Visual Studio Online and deploy to an Azure Website / App Service I receive the following errors:
C:\a\src\House of Canine\HouseOfCanine_1_.metaproj: Unable to copy file "C:\a\src\House of Canine\HouseOfCanine\Bin\AjaxControlToolkit.dll" to "HouseOfCanine\\Bin\AjaxControlToolkit.dll". Access to the path 'HouseOfCanine\\Bin\AjaxControlToolkit.dll' is denied.
Where, I assume, the directory "C:\a\src\House of Canine..." refers to the Visual Studio Online Directory and the directory "HouseOfCanine\\Bin\Ajax..." refers to the Azure Website directory.
This error is repeated for a number of other .dll files in the Bin folder and if I look at the diagnostics tab for the failed build on VSO, I can see that it is where it attempts to copy the binaries to the "drop" where the error fails.
Any advice much appreciated,
Ross
Update
MSBuild Error Code: MSB3021
It seems the permissions are not set correctly for the DLLs in the Bin folder however I cannot change the permissions of the files on Visual Studio Online. Any ideas?

Hi Ross,
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Start Weblogic 10.3.5 in production mode

I am doing a Weblogic upgrade from 9.1 to 10.3.5.
I am also simultaneously doing a Java upgrade to 1.6.0_27.
All changes are done and the project is in in System test mode.
I have configured my Sysytem test environment in development mode and used JDk installed on my computer.
To move the changes to the UAT server, I want to start weblogic in production mode.
can anyone help me as to how will this be different,I am planning thing for UAT and production right now.
Can I run my System test server in production mode .
Is it that with production mode ,we have to use jrockit and not Sun Jdk?
Please help.
Thanks,

Hi
When you started the Weblogic Server, in the starup window (or nohup output file) search for the word named like "Development". When I started my AdminServer and in the output from startup window, I could see a line like this: and in the end it says like AdminServer started in Development mode. On your side search for the word like "Production" or just "WLS Start Mode".
WLS Start Mode=Development
There should be a way to find out from Weblogic Admin Console, but I am not aware of this.
Coming to redirecting the log file(s). do you want to redirect the startup log file(s) like when you start weblogic, you want all the outputs to go to someother file. Or is it the full log files from each server which are under like domain/servers/AdminServer/logs folder. I guess from weblogic console you should be able to control this.
Coming to redirecting startup log files on Linux, under the domain root folder I created a simple file like admin_start.sh with below contents. And I run this admin_start.sh instead of startWeblogic.sh command. This takes care of starting weblogic and all output goes to specific file I mentioned. Also I can kill this window and still weblogic will be starting:
DOMAIN_HOME="/home/ravijegga/Oracle/Middleware115/user_projects/domains/myDomain1"
LOG_FILE="/home/ravijegga/Oracle/Middleware115/user_projects/domains/myDomain1/logs/admin.log"
nohup ${DOMAIN_HOME}/bin/startWebLogic.sh > ${LOG_FILE} &
The point is if you use > you can redirect to any log file. Google around and you should be able to find more examples for Windows OS also.
Thanks
Ravi Jegga

Problems on zipping and unzipping class files

I am trying to add a class file to a new jar file using FileInputStream and JarOutputStream.
I am getting a very unique problems.
when I read a class file using FileInputStream from my local hard disk I am getting 30 bytes less than then actual file size (the difference in bytes is exactly 30 bytes for any file, either class or xml or java, I dont understand this concept). after reading the contents I am writing the bytes read to a jar file using JarOutputStream. This all gets done fine. But when I extract the class file written into the jar file and try to run the class it is giving me the exception as follows:
java.lang.ClassNotFoundException: com.wipro.flowbrix.plugins.factory.NewClass
Exception in thread "main" java.lang.ClassFormatError: com/wipro/flowbrix/plugins/factory/NewClass (Bad magic number)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
The classpath to the folder from where I am running the file is set. I have double checked the classpath.
any information or solutions regarding this would be of great help.

A "magic number" is a short sequence of data at the beginning of a file used to identify the file. ".class" files, for instance, always start with OxCA, 0xFE, 0xBA and 0xBE.
If the 30 bytes missing are at the beginning of your file, there's nothing suprising in getting a "ClassFormatError" exception.
I think we should concentrate on your first problem. Can you post the code used to add the class file, please?
/Stephane

Shared utility class file among servlets and Ejb

I have the following context:
XXX.war:
WEB-INF\
Jsp files
WEB-INF\classes\
WEB-INF\lib\
WEB-INF\web.xml
WEB-INF\weblogic.xml
YYY.jar
META-INF\
Class files
META-INF\ejb-jar.xml
META-INF\weblogic-ejb-jar.xml
In XXX/WEB-INF/classes/â€¦/Util.class
In YYY/util.class
How can I share Util.class between both XXX and YYY?
Cheers,

If you are on 8.1 check out
http://e-docs.bea.com/wls/docs81/programming/classloading.html#1069420
The larger document talks about how classloading works in Weblogic
Dave
<mehdi valizadeh> wrote in message news:[email protected]..
I have the following context:
XXX.war:
WEB-INF\
Jsp files
WEB-INF\classes\
WEB-INF\lib\
WEB-INF\web.xml
WEB-INF\weblogic.xml
YYY.jar
META-INF\
Class files
META-INF\ejb-jar.xml
META-INF\weblogic-ejb-jar.xml
In XXX/WEB-INF/classes/???/Util.class
In YYY/util.class
How can I share Util.class between both XXX and YYY?
Cheers,

8.1.7 LoadJava. Where do the class files get Stored

I am using an 8.1.7 Database. I have class files in my database that were loaded using loadjava. I want to extract these class files to do a binary comparison. Does anyone know where a users schema the actual class files are stored. In 9i i believe that they are stored in CREATE$JAVA$LOB$TABLE but they aren't stored there in my 8.1.7 database. Where should i be looking in an 8.1.7 database???
Cheers
Paul

found a solution. In case it is of interest to anyone, using enterprise manager from a 9i client, connected to my 8.1.7 database, and under, schema--> user-->source types--> java classes. for each class, select the class and there is an option to export the class on the RHS. Selecting this, can export class files to hard drive.

How to protect the class files inside jar file.

Hi Group,
pls help me.
my need is i created a executable jar file with certain classes.
and i'm supposed to send it to my client.
but if the client needs he can extract the class files from the jar and with the
help of some decompilers he can convert class file to .java source code and read the whole
stuff.
how can i protect my jar file from these.
is there any security mechanism for that
pls help me.
Regards,
Ranjith.M

In order to protect my jar file I tried the jar signer technology but it only protects the jar from modification so I need to know how to protect jar file from decoding of the contents inside.

Jars and .class files - security of the source code

Hi,
I have an app that is in a jar file with the .class files (so no source code).
I'm wondering how difficult it is to attain the source code from these .class files in my jar? Looking through the contents of the .class files it seems there is a large amount of readable text. For example I see method names, variables, etc.
This leads me to believe these jars are not secure. What is a better way?
Thanks!
Edit:
Looking around, I've noticed many java decompilers and Sun even supports a dissembler - javap. I think this is not cool, haha.
What way can I protect my code? To me, the value of java just went way down due to the ease at attaining source code (based on what I read in the past hour or so. I have yet to try it myself). I wonder if this impacts companies reasons not to use java?
Edit 2:
I heard that there may be a way to make the jar closed, so you can't say, use winrar, to extract the class files. Does anyone know anything about this?
Message was edited by:
dayrinni
Message was edited by:
dayrinni

Hi,
I have an app that is in a jar file with the .class
files (so no source code).
I'm wondering how difficult it is to attain the
source code from these .class files in my jar?
Looking through the contents of the .class files it
seems there is a large amount of readable text. For
example I see method names, variables, etc.
This leads me to believe these jars are not secure.
What is a better way?
Thanks!
Edit:
Looking around, I've noticed many java decompilers
and Sun even supports a dissembler - javap. I think
this is not cool, haha.
What way can I protect my code? To me, the value of
java just went way down due to the ease at attaining
source code (based on what I read in the past hour or
so. I have yet to try it myself). I wonder if this
impacts companies reasons not to use java?All intellectual property stored in electronic form is vulnerable. Not just Java bytecode. You can use tools called obfuscators to make decompiling more difficult, which is usually good enough. The truth is, no matter how great you think your code is, it's of a lot less interest to others than you actually think. Unless you've got a particularly sexy argorithm or something, it's not really worth worrying too much about
All you can do is make it more difficult for people to crack things, never prevent it. True of all languages, all electronic media

HELP!!! java.lang.ClassFormatError: (Truncated class file)

Hello all,
I'm writing a ClassLoader and the funniest things are happening. If I load a compiled class for the first time after compilation everything is ok. Once I change the class and recompile it, it starts putting out java.lang.ClassFormatError: (Truncated class file). If I alter the changes back to normal and recompile. It works again. Is there some sort of buffer which keeps the once loaded class in memory, even after rebooting?
Please help, I'm at a loss
Gideon

hi dmbdmb,
I got following error when try to run a java code in JBoss.
15:39:56,696 ERROR [LogInterceptor] Unexpected Error:
java.lang.ClassFormatError: Thilina (Truncated class file)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at java.lang.ClassLoader.defineClass(ClassLoader.java:448)
at com.sun.tools.javac.v8.StringCompiler$Loader.findClass(StringCompiler
.java:63)
at com.sun.tools.javac.v8.StringCompiler.executeMethodWithReturnType(Str
ingCompiler.java:120)
at cc.aot.qVoice.domain.ejb.qVoiceManager.qVoiceManagerEJB.getVxmlString
(qVoiceManagerEJB.java:125)
I use JBoss 3.0.6 and sdk 1.4. In my program, classes are create and load on the fly. Then using Reflection API I called some
methods in the dynamically created class(this class not
write into a file and it is taken as a String variable).
I refferd this url as a guid to write class loader and compiler.(actually same thing i copied
from there and change it's name Pmat1 to StringCompiler)
http://forum.java.sun.com/thread.jsp?thread=347467&forum=4&message=1439418
When I run this as a normal application, it is work well. Then I try to run it in a jboss and it will give the above error.
In here I Wote some EJBs and struts also and i called the methodds in the StringCompiler(Pamat1) class in a EJB. Thilina is
the name of the dynamically created calss and StringCompiler is the class that includes the class loader and compiler methods
as in the above url. qVoiceManagerEJB has a getvxmlString method. Whithin this method
i called required the methods in the String compiler.
Can u some body help me. Thanx in advanced for any help.
anjithalb

Starting Weblogic 6.1 failure extracting WAR classes file access denied

Similar Messages

Maybe you are looking for