Starting with javacard development

Hello,
I have to start the development of JavaCard applet and I need some information concerning which smart card to buy.
As reader I have found the Omnikey CardMan 5321 and the 3121 except for the dual interface of the first one, are them comparable?
I'm not able to choose a smart card model.
The SAMSUNG S3CC9P9 32 Kb is really cheap but is based on the JavaCard 2.1.1 and GP2.1.1 as stated on a vendor website.
The IBM JCOP2136 Kb seams to be Java Card 2.2.1 based and GP2.1.1 but is a little bit more expensive.
TheIBM JCOP3136 Kb seams to be equal to the 21 except for the dual interface..is it true?
No trace of the IBM JCOP41.
Is it so important to have a JavaCard 2.2.1 based smart card or the 2.1.1 is enough?
In you experience what is the best choice?
Thanks in advance
Maui

Hello bf2fighter ,
thank you for your answer.
You have been really clear, every JavaCard will do the job.
I don't think to proceed with a commercial product, but thanks for your advice, it is really important.
Concerning the choice of the smartcard I have still a question, what is the problem in writing a match-on-card application? Is the fact that every device producer (device such as fingerprint reader) uses a different algorithm/protocols to authenticate or the javacard's implementation of the Biometric API?
I can always write my own match-on-card application without the Bio API right?
Thanks
Maui

Similar Messages

Starting with JavaCard

Hi:
I'm starting with Javacard, I have read too much about this. I have a question.
How can I store the created application on a SmartCard? Do I need a SC reader/writer? Would you suggest some device?
Thanks.

First suggestion - read more.
Second - yes - get any pc/sc reader you can get. And watch out that ur "SmartCard" is acctually a JavaCard ... othervise your readings will not make too much sense.

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue?

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons

Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit

What software do I need to get started with GIS development

Hello, I'm a Oracle RDBMS specialist but interested in getting into GIS development. I want to set up a local environment and play around with it. Could someone advise me as to what software I need to install/download? Is all of it free?
1.) I'm assumming I need ORACLE with SPATIAL (was looking into 10g) Is this download free?
2.) I also looked into MAP VIEWER as an extension of the Oracle Application Server.
Are these 2 products all I need to get started?
I also read alot about arcGIS? Can this product be downloaded for free or is it a licensed product?
Does anyone have any other suggestions about some software/documentation that may help me get started in this technology.
Thanks,

Hello!!
Actually, you need Oracle Spatial or Oracle Locator. Oracle Locator is free on Oracle Express, and you could start with it. Otherwise, if you want to know more, Oracle Spatial comes with Oracle Enterprise, and Oracle 10g gives you a schema that allow you to store, manage and query spatial data through Oracle functions, etc.
To start using MapViewer, considering that you already have some spatial data stored on the database, you could download the MapViewer kit at http://www.oracle.com/technology/products/spatial/index.html.
You could buy the Pro Oracle Spatial book. It´s very good.
Good Luck!
Regards
Carlos Eduardo

Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
to here that as well.
Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
THAT would also work incredibly well as I am much more familiar with Matlab.
I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
Thanks in advance for any advice you can give me!

Hi Jicnon,
Thank you for posting in MSND forum.
Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
,maybe you will get better support.
In addition, I find a similar thread about your issue, maybe you will get some useful message.
https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to start with oracle development

Hi Friends,
I'm new to Oracle development(now planning to go as an oracle developer)
My question is .. how to do I start study'g ?
actually i took some basic training.. but i dint feel its effective..
and also during the training, my instructor provided me with some oracle pdf's..
so can you guys please suggest me, some ways to better understand and learn oracle development.
Regards,
Jack

Start from oracle document.
All documents are available here
http://tahiti.oracle.com/
You may want to spend some time with the database concepts.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/toc.htm
And then application development is there
http://www.oracle.com/pls/db111/portal.portal_db?selected=5&frame=
This should get you started.
Thanks,
Karthick.

Is this the right place for me to get started with pdf development?

Hi, What I am going to do is to write some AS3 classes which will load a pdf file and can extract its data like taking BitmapData shots from all the pages and that stuff...
so, will you be able to let me know if I'd be able to ask tech questions in this forum along the way? and also, will you be able to tell me where to start to get some helpful information about pdf files so that I can access and read them in binary level?
any comment is appriciated,
Hadi

thanks for the reply, I just downloaded that reference book and will start reading it in a few minutes... I wonder if I'd also need to purchase the pdf library thing later? http://www.adobe.com/devnet/pdf/library/
or accesing the pdf in AS3 in binary level will solve my problem of taking bitmapData screenshots from pages?
Regards,
Hadi

Getting Started with JavaCard

hi all,
i have mifare dual interface card, and want to create a s/w that can write read to the smartcard,
and i am glad if i can write to RFID, and the Javacard
but i dont have any softawre instead the hardware and cards,
i have also Mifare RFID
Frans
Indonesia

If you have a pure Mifare card you won't be able to use Java Card technology. Check out NXP's product website on Mifare:
http://www.nxp.com/#/pip/cb=[type=product,path=/53420/53565/41960]|pip=[pfp=41960][0]
For writing/reading the Mifare blocks you can use the Mifare Wnd program:
http://www.nxp.com/files/markets/identification/download/pe089917.zip

Problem starting with NWDS

Dear All,
i have a problem starting with netweaver developer studio.
once it is opened , it is not responding......same application is staring again......keep not responding.........
can anyone help me to solve this

Hello Sithi,
The information you provided is not sufficient to understand the problem situation.
Give more infos like:
1. NWDS version
2. Did your NWDS work before properly or is it a new installation making problems are installing.
3. Check the log file in NWDS for Errors
Also my advice would be to:
1. Close NWDS
2. delete the contents of workspace directory =>
%user_home%\Documents\SAP\workspace\
(%user_home% = your home directory)
3. After deleting just start NWDS.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How to get started on JavaCard 3.0 development?

Hi,
I wasn't able to attend JavaOne, but from what I understand, some lucky developers were able to write JavaCard 3.0 apps to compete in the contest that was held at JavaOne. So, how can I get started in JavaCard 3.0 app development? I can't find anywhere where I can download an SDK or buy compatible cards.
Thanks,
Bruce

daddyhop wrote:
I but I want to use the new features that in 3.0 that developers had access at JavaOne in order to participate in the contest. Where's the link for the stuff that folks had to play with at JavaOne?http://java.sun.com/javacard/contest/index.jsp
http://java.sun.com/javacard/contest/download.jsp
http://developer.gemalto.com/home/java-card-3/developer-contest/jc3bot-installation-instructions.html
http://developer.gemalto.com/home/java-card-3/developer-contest/jc3bot-development-guide.html
http://developer.gemalto.com/nc/forums.html
http://javacard.vetilles.com/2008/05/08/writing-a-java-card-3-program/
http://blogs.sun.com/javacard/entry/not_an_architecture_diagram

Developerday VM Ora-12505 Getting Started with Oracle SQL Developer 3.0

Just downloaded the VM , Started the tutorial Getting Started with Oracle SQL Developer 3.0
As mentioned in tutorial , I was trying to make a new connection and I am getting following error
Ora - 12505 : TNS Listener doesn't currently know of SID
I gave SID as orcl, and seems to be working OK, can I use orcl for this tutorial
Edited by: OrcArgusDev on Apr 13, 2012 9:01 AM
Edited by: OrcArgusDev on Apr 13, 2012 9:11 AM

Thanks, I'll survive. Just my luck, the first item I try to anon. debug didn't work! :)
thanks, hopefully this problem will be few and far between

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to start working with a Development Component

Hi Guys,
Till now I was working with the local development of WD. I was the only one working so I created a local project and use to deploy to the J2EE Engine.
Now we have got the full NWDI (Netweaver Dev Infrastructure).
I want to know exactly how to start working and creating Projects now that the work is not local. I may need to use 1 DC inside another.
A Development Component is to be created in the CMS and Checked into DTR. From the DTR I check in into my workspace. This is all i know
Can someone tell me exact steps of how to start the work.
Thanks for your support

Hello,
I believe you have already setup NWDI correctly and its running fine.
So here is link of a step by step guide.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/2656405aff1e24e10000000a1550b0/content.htm
If you want to migrate your existing WD Projects to DC Projects, here is a link for "how to" do the same.
http://help.sap.com/saphelp_nw04/helpdata/en/9e/1c200ac164cf4a942f2dacdf3359e9/frameset.htm
If you want to create an external utility library containing some jar files which you want to use in your DC, follow this excellent blog by Valery.
/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
Hope this is good enough for you to start with.
Regards,
Shubham

Own developements & Customizing starting with Z

Hi,
quick question: it is known that project specific customizing needs to start with Z or with Y in order to avoid being overwritten in the next SAP version.
Is there any other letter I may use in order to start my own customizing or developments?
Thanks,
F

>
Navneeth Bothra wrote:
> Hi,
>
> You can use your own namespace, other than 'Z'r 'Y' for customer developents.
>
> Thanks & Regards,
> Navneeth K.
But you have to apply for it and get it approved first. Tip - get as short a one as possible... I'm using one with 8 characters...

How to start with Card programming !

Hello,
I want to learn card programming. For this i want to know few things.
1) Where can i find an IDE to write program ?
2) Do we get any simulator in it ?
3) How to compile and run the card program.
Right now i can not buy a reader or card. Just want to develop in simulator. How to start ?
Please, help me. I do not know anything about it.
Thanks,
Abhijit Chandekar

I want to learn card programming.http://developers.sun.com/techtopics/mobility/javacard/articles/
Read "An Introduction to Java Card Technology" Part 1 to 3 for starting with java cards.
1) Where can i find an IDE to write program ?The JCOP tools plugin for Eclipse is the cheapest IDE i know.
http://www.zurich.ibm.com/jcop/products/tools.html
2) Do we get any simulator in it ?Use CREF from the Java card development Kit or the JCOP emulator from the JCOP tools.
3) How to compile and run the card program.See the Java Card Development Kit User’s Guide that comes with the Java Card JDK.
@the other forum member:
May be we should start creating a forum-FAQ which will be posted once a week. That would make it easier to help all the "newbies"...
Someone interested?
Jan

Starting with javacard development

Similar Messages

Maybe you are looking for