Startup or Default Services

How do you get services to automatically startup when you restart the Server? The only services that start up automatically are those that I initially picked during the initial setup of a new Mac OSX Server installation. IE AFP and on Open Directory startup, but now I want Software Update to always startup, but instead I have to manually start it each time I restart the server. Can't find anywhere in the documentation that addresses this.

hostconfig is already showing that as shown below
AFPSERVER=-YES-
AUTHSERVER=-NO-
AUTOMOUNT=-YES-
CUPS=-AUTOMATIC-
NFSLOCKS=-AUTOMATIC-
NISDOMAIN=-NO-
TIMESYNC=-YES-
QTSSWEBADMIN=-NO-
WEBSERVER=-NO-
SMBSERVER=-NO-
SNMPSERVER=-NO-
SPOTLIGHT=-YES-
QTSSRUNSERVER=-NO-
TIMESERV=-YES-
WEBPERFCACHESERVER=-NO-
ARDAGENT=-YES-
SOFTWAREUPDATESERVER=-YES-
HOSTNAME=-AUTOMATIC-
LDAPSERVER=-YES-
IPFILTER=-NO-
but if I restart the server, softwareupdate is not running and I have to use server admin to manually start it.

Similar Messages

Default services that need to run on Oracle GRID.

I started learning RAC recently, I have got 3 years of experience in managing stand-alone instance.
The question I have now is
Q1 - What are all the default services that need to run on Oracle GRID ?

Hi,
user639966 wrote:
I started learning RAC recently, I have got 3 years of experience in managing stand-alone instance.
The question I have now is
http://learnwithme11g.wordpress.com/2010/03/15/11g-new-background-processes/
http://www.oracle-home.ro/Oracle_Database/RAC/11gR2-Clusterware-Startup-Sequence.html
http://appsdbaworkshop.blogspot.in/2011/11/manage-startupshutdownstatus-services.html
better to refer oracle document
http://docs.oracle.com/cd/E11882_01/rac.112/e17264/toc.htm
Regards
Hitgon

Jabber 4 Everyone default service profile

Hello all,
A customer running UCM 9.1.2 with IM&P 9.1.2. They have rolled out Jabber Desktop as the default application for IM and Presence for the organization. We have setup several "SERVICE PROFILES" inside of UCM to differentiate between Ehanced Presence for employees that have both IP Phones and Jabber, and just Regular Presence for employees that do not have an IP Phone on the system. We made the Regular Presence the "DEFAULT SERVICE PROFILE" and then we ran a bulk update to update all users "currently" in the directory to have the option
HOME CLUSTER and ENABLE User for Unified CM IM and Presence.
CUCM is AD integrated so all the users come from AD
The issue we are experiencing is for any new hires, the account gets created in AD then eventually sync'ed into CUCM. We can't find a switch that allows us to make sure new users have certain "DEFAULT USER" settings namely "HOME CLUSTER" and "Enable User for Unified CM IM and Presence. So these new users are not getting this setting and can not login to Jabber until this occures
Thanks

Hi Ryan,
I have the same issue and at the moment no solution for that.
I have a bulk user template, so everytime new users come in, I bulk the setting over the new users.
Would be nice to see, if someone has another solution.
Best regards
Ben

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

Can you specify the port for default services when installing OEG?

Hi everyone,
The default installation of OEG 11g uses 8090 port for management services, and 8080 for the virtualized services that you register in the gateway. After installation, you can change the ports by editing gateway's Profile Repository in Policy Studio. But is there a way to specify the port number before/during the installation?
Thanks,
Iris

Hi -
here are the steps to change the listening port (in 11.1.1.6)
- Connect to OEG using Policy Studio
- Click on "Edit Active Configuration"
- Under "Services", find the default services, and you'll see a listener for port 8080 there. Right-click to edit this.
- Change the port from 8080 to your desired port. Note that if you've installed the software and running it as a non-root user on Linux, then it will not have permission to bind to a low-number port (like port 80 for instance)
- Now deploy your change (for 11.1.1.6 hit F6 or click on the "deploy" button which is towards the right of the toolbar in Policy Studio).
- You may also choose to version your configuration at this point (click on "version" which is beside the "deploy" button and enter a comment about your version).
Now verify that OEG is listening on your new port. You can see it bind to the new port by looking at the trace [Connect a browser to port 8090 on OEG, login as admin or another user who has rights to view the trace, then click on "Trace"].
It's a usual practice to configure a new listener on SSL (e.g. on port 443) then to delete that pre-configured port 8080 listener, if you want to only receive traffic over SSL.

How to assign the default service package to the user in the command line ?

when i create use use the following command ,which service package is assigned to the user ,or in where can i set the default service package ,thanks for you!
/opt/SUNWcomm/bin/commadmin user create -D admin -F John -l jdoe -L Doe -n jnpc.com.cn -p 80 -w admin123 -W demo -X v120e.jnpc.com.cn -S mail,cal -E [email protected] -H v120e.jnpc.com.cn -k legacy

When I create a user via command-line, I get no service package. I don't see any way to assign such on creation via command-line.
Some of what might be in a service package can be set as default falues, through configutil.
quota is this kind of thing.

How to set default services in cc.xml

Hi,
When deploying a repository manager, I can set the default services in a co.xml by setting
<property name="services" value="properties,feedback,layout"/>.
But how can I set the default values for services in cc.xml? I tried
<attribute name="services" type="List" default="properties"/>
but that doesn't take effect.
Help appreciated!
Thanks,
Ray

Hi Martin,
Thanks, it works:) points rewarded.
By the way, if I want to specify the default value of a property of type "
class
" to "<u>Not Set</u>", how should I write the cc.xml? I have this requirement because, by default, the <u>Property Search Manager</u> is
com.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
, which has something wrong in our EP.
In my cc.xml I wrote:
<attribute name="propertysearchmgr.class" type="class" constant="" />
But failed. What should I do?
Thanks,
Ray

Sqlplus: Can I define a default service?

This is applicable to those of us which most of
the time log into the same service with SQL*Plus.
I found out that from the Windows environment, I can
always insert the name of my prefered service into the
registry, and every time I run SQL*Plus, I can leave
the 3rd. field ("Host String") empty.
If Oracle Corp. is consistent, there should be some
Unix environment valiable like:
setenv PREF_ORA_SERVICE database@payroll
or something like that, which will allow me to
have an implicit default service (a.k.a. SID)
Is there such a thing?
TIA,
-Ramon F. Herrera

Thanks a lot to Don Klein and Steven Pilgrim for their
kind answers. Don: the ORACLE_SID environmental variable
only works for me when the client (sqlplus) is located in
the same host as the server. Hovever, the TWO_TASK tells
my server-less Linux client to connect to my Solaris server.
Thanks again!!
-Ramon

Automating startup of 9iAS services on Unix

Hello,
could you please guide me through the recommended procedure for
enabling automatic startup of 9iAS services when my server
starts.
I know that /etc/oratab should be modified, what else need to be
done.
NB. I am running 9iAS on HP-UX (64-bits)
thanks in advance for your replies
Kind regards
Yogeeraj

hi folks,
i know that this may be a trivial issue for some of you. Please
spare some time to send me some guidelines.
should i do it the same way as Oracle? or is there another way?
kind regards
yogeeraj

Calendar sync problem: "the default service for your device's calendar has changed..."

When I go to sync, this window pops up: "The default service for your device's 'Calendar' has changed since the last time you synchronized. Click OK to use your new default service and combine your data, which might duplicate some entries. Click Cancel to stop...."
I haven't changed a thing. What's going on? I don't want to get duplicate entries.

Yes, I sync with Outlook. From what I understand, your default service should be your e-mail address for both mail & calendar.Spell Check

Transferring from Yahoo mail to Gmail default service for calendar

Good day,
I am given up on using Yahoo Mail after 13 years. I get timed out and have problems login in and some of my messages don't get forwarded to my BlackBerry. So I switched over to using Gmail as my main e-mail provider and it's been working well so far.
I use Outlook calendar on my laptop and sync it with my Torch 9800 using USB connection. If I remove my Yahoo Mail as a default sevice for Calendar, Contact List and Messaing, and select Gmail as my default service how do I convert all my calendar and contact list to the Gmail profile. Actually, not sure if my contact list would be affected since I don't see the association of the contact list to my Yahoo Mail currently. If I delete my Yahoo profile would my events get deleted or would they get transferred to the default calendar profile? Or do I just sync it again with my Outlook and my events will be transferred to the Gmail profile after selecting Gmail as my default service for Calendar and Contact List. I hope I am explaining this correctly. I also have a Facebook calendar profile showing birthday reminders, which I'm trying to remove but that's another problem.
I want to do it right the first time and don't want to accidentally delete my events and contact list.
Thanks in advance.
Solved!
Go to Solution.

Before doing anything make a full backup of the device.
I think you can solve this by making the Gmail the default service. Then in the calendar app go to Options. On the screen type the letters M O V E. That should move all events to the default calendar. It's been a while since I've done this, though.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Help - "Default Services" in "Advanced Options" Menu has White Screen

I just purchased my BlackBerry Curve 9330 yesterday. I went in to change a feature (I followed the BlackBerry Help Guide) however, when I got to the "Default Services" area it shows only a white screen. What can I do to fix it?
I tried to take it back to the Alltel Store I bought it from, but they were of little to no help (just genuinely annoyed that I interrupted her solitaire game)
Do I need to have them replace the phone or is there something I can do to make it work properly?
I have attempted rebooting the phone and also downloading an app like facebook (the latter was the dealer's only suggestion)

Hi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If that does not clear it, then an OS reload would be your next step...here is a process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Given how new it is, you must weigh the efforts against the potential for a non-satisfactory outcome...there is no way to say 100% that any advice given here will result in anything positive whatsoever. If you are not comfortable with that possible outcome, then you should just take it in for warranty evaluation (though the person playing solitaire will likely be even more annoyed!!).
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Default services ...Calendar, Contact list, Messaging

Hope someone can help
New to BB
Set it up 10 days ago, works OK, but an app does not work
Got me looking at settings etc
In the DEFAULT SERVICES section of ADVANCED OPTIONS
the calendar (CICAL) and messaging (CMIME) are set to the correct e-mail address
but the contact list (SYNC) is set to an incoreect e-mail address
This does not have a drop down box (like the other two)...so apparantly I can t change it
buit I need it to be the same as the Calendar & messaging setting
Can anyone help me please ?
Thanks alot
Alan

AlanKent wrote:
2) I dont know whether BIS /  BES...how do I find out ?
BIS - (BlackBerry Internet Service) personal account and device
BES - (BlackBerry Enterprise Service) most often a corporate provided and connected to corporate exchange email accounts.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Default service(application:cisco) not available from CIPC

I search to have more informations on Default service of CUCM because I cannot reach them for my CIPC and if the problem is a network problem I will need to know the port
Best regards,.

Thanks for your response Ram
If this is a manual step (which I believe it is), this is not something I did when I originally provisioned the MMS.
But I have tried it, and still, the Terms Sets are not available when I go to Site Settings > Term Store Management
Just to confirm what I just attempted:
Central Admin > Application Management > Manage Service Applications > %ManagedMetaDataService% > Permissions
Under Connection Permissions, I added the service account which is the identity for the Web Application and gave it
'Full Access to Term Store'
Is there an additional step I missed? I have looked at the SQL permisisons as they all seem fine.

Default Services NO CALENDAR

In Default Services there is NO CALENDAR. I think I may have deleted it by mistake. How do I restore it to default?

This is a Blackberry BOLD 9900

Startup or Default Services

Similar Messages

Maybe you are looking for