Startup time increases after installition of mountain lion.

after installition of mauntain lion, startup time increases . is it necessary to first format our hdd before installition of mountain lion

I don't reboot much, but when I reboot my Mountain Lion MacBook Pro (Late 2008) it takes much longer to boot. Shutdown seems to take forever to get to the Boot beep, then after the system gives me the apple screen it takes a longer time to get to the logon screen.
The systems is otherwise quite stable, but this oddity is bugging me.
I did a clean install (and format) of the system, so it's not crud left over from Snow Leopard.
I did a Verbose boot, and on shutdown it seems to have problems quitting some componets and unmouting the disk (I did not write down who he culpuits were- is it logged on my HD somewhere?).

Similar Messages

How can I resolve backup time machine after upgrade to Mountain Lion?

Time machine backup is "failed" and message reads: The backup disk image "/volumes/data/lynnblake's MacBookPro sparsebundle" is already in use.
I have no idea what this means or how to solve. It started after my upgrade to mountain lion.

Shut down the computer then restart it.

Time Machine after upgrade to Mountain Lion need help

Just had Apple store upgrade my iMac to Mountain Lion and I had taken my 2T external drive with me with my most recent time machine backup. I am home and hooked up the driveand in preferences it says oldest backup; and latest backup none. The drive doesn't show up on my desktop. I thought they were going t be sure all was working.

Now I know why I was nervous about doing this myself - the power cord wasn't plugged in all the way. It seems to be backing up now. It says 228 GB of 2 TB available - backing up 2.22 of 13.33 GB - oldest backup none - is this just an incremental backup and are all of my old backups still there. This is one of the main reasons I went to the store for the install of Lion as I was concerned about my computer being completely backed up first. The assured me the time machine backup was all I needed. I guess I need reassurance right now.

Time Machine after upgrade to Mountain Lion from Snow Leopard

Hi,
I upgraded my Macbook pro to Mountain Lion yesterday from Snow Leopard. I just did the upgrade over the top of snow leopard so all of my apps and documents are exactly as they were (right down to the wallpaper)
However, there is a problem with time machine.
Time Machine no longer automatically backups to the drive I had been using for my snow leopard backups (I assume this is because I have changed operating systems).
How can i continue to use this drive for time machine?
Can I just select it again and will it retain my existing snow leopard backups?
Or do I need to format it?
Cheers guys.

Thank you, so that will retain my existing snow leopard backups and just start making new mountain lion backups? (There is more than 1TB of available space on the drive still)

Problem accessing internet using time capsule after update to mountain lion

After updating my macbook air to moutain lion i am having some trouble accessing internet.
Evertytime i re-start my mac or airport utility i am able to access internet properly. After sometime when i access some particular sites, internet access goes down and i need to restart time capsule to access internet again.
Even though in airport utility internet is marked as disconnected, time capsule's indicator is still glowing green colour.
I tried deleting the com.apple.timemachine.plist file from /Library/Preferences/, but still no luck.
Is anybody else also facing the same problem? How can i resolve this problem?

Is the time capsule the only router in the network?
Try setting the lease time in the TC to very short value.. 20min or even less, 10min. It will not add signficant network traffic but might keep the Air updated to the TC.
I would also use SMB compatible name for the TC as well as wireless.. ie short, no spaces.. pure alphanumeric.
Set a different name for 5ghz so it cannot swap around.
And lock the wireless channels. Try each channel in turn, to see if any are better.

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After installing the mountain lion on my Mac at startup a stop sign appears and i cant loguin or do anything.. What should i do?

After installing the mountain lion on my Mac at startup a stop sign appears and i cant loguin or do anything.. What should i do?

If you mean the "no entry" sign, a circle with a slash through it, then you need to reinstall Mountain Lion.
Boot into the Recovery HD by holding down cmd-r at startup tone until gray screen.
From there, reinstall Mountain Lion.

Imac keeps crashing in time machine backup after upgrade to mountain lion

2008 imac kept crashing (shutdown and restart) during first backup after upgraded to mountain lion. The backup size was about 10GB but time machine crashed after a while (at most 2GB) and never completed backup. So, I don't have any backup since right before I upgraded from Lion. Any suggestion?

Something strange happened. I was able to get time machine to work by going out to the login screen (the account kept logged in) and let it run the backup with the screen off (screen auto off after a few min). I tried it on two different external drives and that did the trick on both. Since the initial Mountain Lion backup was huge (155 GB), I was quite surprise that it worked at all. I assume your MBP was a Lion to ML. I also just did a 2012 MBP upgrade but that one was smoother. I did not recall having crashing issue. One thing I did find during this was that my WD passport USB drive was corrupted. Not sure it was the cause or not. I had to erase and reformat to get it back to work. Maybe do a verify disk to confirm. Good luck.

After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

Apple made some changes to increase security that slowed the boot time.
Startup - Slow Boot
Startup - Slow Boot (2)
Startup - Slow Boot (3)

After install of Mountain Lion I have no facetime. It is nowhere in hd and ap store will not allow download. Will I need to re-instal ML in order to get it back??

After install of Mountain Lion I have no facetime. It is nowhere in hd and ap store will not allow download.
Will I need to re-instal ML in order to get it back?

Where are you, geographically?
I might suggest:
Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).
If this doesn't work, then reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Can I use time machine to revert to Mountain Lion from Maverick?

In spite of everyone saying how great Maverick is, I have poblems with slow operation, hard to use mail addresses, problems with iPhoto, etc. So I want to go back to Mountain Lion. Can I use Time Machine to restore back before Maverick was installed?

Only if you have a full backup of Mountain Lion on your Time Machine backup drive. Then you can boot to the Recovery HD that is on the Time Machine backup drive, erase your drive, then do a full Mountain Lion restore. But if you have already used Time Machine to backup your Mountain Lion system, then this won't work. You will need to erase the drive and reinstall Mountain Lion separately. Then you can restore your Home folder from the Time Machine backup.
Or you can avoid all the above by trying to fix the problems with your Mavericks system. You will need to upgrade iPhoto.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac. Anybody having similar probelms?
I am thinking about doing a clean install of Mountain Lion. Would I be able to restore my applications and data from Time Machine after the re-install?

My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem. After it sleeps, I go to use something... and the beachball of death occurs. This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
It could possibly be revolving around safari... as that is really the only thing that is running consistently. I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008. This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

Startup time increases after installition of mountain lion.

Similar Messages

Maybe you are looking for