StartX Failing With ATI Proprietary Drivers
I have installed the catalyst legacy drivers, but cannot figure out why they are not working.
My log from xorg:
[ 2142.903]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2142.903] X Protocol Version 11, Revision 0
[ 2142.903] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2142.903] Current Operating System: Linux arch 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
[ 2142.903] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=82506866-1d99-427a-abf7-4cfa641b7c26 ro quiet nomodeset
[ 2142.903] Build Date: 27 August 2012 08:04:39AM
[ 2142.903]
[ 2142.903] Current version of pixman: 0.28.2
[ 2142.903] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2142.903] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2142.903] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 8 10:50:35 2013
[ 2142.903] (==) Using config file: "/etc/X11/xorg.conf"
[ 2142.903] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2142.903] (==) ServerLayout "aticonfig Layout"
[ 2142.903] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2142.903] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2142.903] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2142.903] (==) Automatically adding devices
[ 2142.903] (==) Automatically enabling devices
[ 2142.903] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2142.903] Entry deleted from font path.
[ 2142.903] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2142.903] Entry deleted from font path.
[ 2142.903] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2142.903] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2142.903] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2142.903] (II) Loader magic: 0x7c8b00
[ 2142.903] (II) Module ABI versions:
[ 2142.903] X.Org ANSI C Emulation: 0.4
[ 2142.903] X.Org Video Driver: 12.1
[ 2142.903] X.Org XInput driver : 16.0
[ 2142.903] X.Org Server Extension : 6.0
[ 2142.904] (--) PCI:*(0:2:0:0) 1002:9488:106b:00b6 rev 0, Mem @ 0xc0000000/268435456, 0xd0220000/65536, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
[ 2142.904] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2142.904] (II) "extmod" will be loaded by default.
[ 2142.904] (II) "dbe" will be loaded by default.
[ 2142.904] (II) "glx" will be loaded by default.
[ 2142.904] (II) "record" will be loaded by default.
[ 2142.904] (II) "dri" will be loaded by default.
[ 2142.904] (II) "dri2" will be loaded by default.
[ 2142.904] (II) LoadModule: "extmod"
[ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2142.905] (II) Module extmod: vendor="X.Org Foundation"
[ 2142.905] compiled for 1.12.4, module version = 1.0.0
[ 2142.905] Module class: X.Org Server Extension
[ 2142.905] ABI class: X.Org Server Extension, version 6.0
[ 2142.905] (II) Loading extension MIT-SCREEN-SAVER
[ 2142.905] (II) Loading extension XFree86-VidModeExtension
[ 2142.905] (II) Loading extension XFree86-DGA
[ 2142.905] (II) Loading extension DPMS
[ 2142.905] (II) Loading extension XVideo
[ 2142.905] (II) Loading extension XVideo-MotionCompensation
[ 2142.905] (II) Loading extension X-Resource
[ 2142.905] (II) LoadModule: "dbe"
[ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2142.905] (II) Module dbe: vendor="X.Org Foundation"
[ 2142.905] compiled for 1.12.4, module version = 1.0.0
[ 2142.905] Module class: X.Org Server Extension
[ 2142.905] ABI class: X.Org Server Extension, version 6.0
[ 2142.905] (II) Loading extension DOUBLE-BUFFER
[ 2142.905] (II) LoadModule: "glx"
[ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2142.905] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2142.905] compiled for 6.9.0, module version = 1.0.0
[ 2142.905] (II) Loading extension GLX
[ 2142.905] (II) LoadModule: "record"
[ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2142.906] (II) Module record: vendor="X.Org Foundation"
[ 2142.906] compiled for 1.12.4, module version = 1.13.0
[ 2142.906] Module class: X.Org Server Extension
[ 2142.906] ABI class: X.Org Server Extension, version 6.0
[ 2142.906] (II) Loading extension RECORD
[ 2142.906] (II) LoadModule: "dri"
[ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2142.906] (II) Module dri: vendor="X.Org Foundation"
[ 2142.906] compiled for 1.12.4, module version = 1.0.0
[ 2142.906] ABI class: X.Org Server Extension, version 6.0
[ 2142.906] (II) Loading extension XFree86-DRI
[ 2142.906] (II) LoadModule: "dri2"
[ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2142.906] (II) Module dri2: vendor="X.Org Foundation"
[ 2142.906] compiled for 1.12.4, module version = 1.2.0
[ 2142.906] ABI class: X.Org Server Extension, version 6.0
[ 2142.906] (II) Loading extension DRI2
[ 2142.906] (II) LoadModule: "fglrx"
[ 2142.906] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2142.920] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 2142.920] compiled for 1.4.99.906, module version = 8.97.2
[ 2142.920] Module class: X.Org Video Driver
[ 2142.921] (II) Loading sub module "fglrxdrm"
[ 2142.921] (II) LoadModule: "fglrxdrm"
[ 2142.921] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2142.921] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 2142.921] compiled for 1.4.99.906, module version = 8.97.2
[ 2142.921] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 2142.921] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7
[ 2142.921] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[ 2142.921] (--) using VT number 2
[ 2142.925] (WW) Falling back to old probe method for fglrx
[ 2142.928] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2142.929] (--) Chipset Supported AMD Graphics Processor (0x9488) found
[ 2142.929] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2142.930] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2142.930] (II) AMD Video driver is signed
[ 2142.930] (II) fglrx(0): pEnt->device->identifier=0x93e4a0
[ 2142.930] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 2142.930] (II) Loading sub module "vgahw"
[ 2142.930] (II) LoadModule: "vgahw"
[ 2142.931] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2142.931] (II) Module vgahw: vendor="X.Org Foundation"
[ 2142.931] compiled for 1.12.4, module version = 0.1.0
[ 2142.931] ABI class: X.Org Video Driver, version 12.1
[ 2142.931] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2142.931] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2142.931] (==) fglrx(0): Default visual is TrueColor
[ 2142.931] (**) fglrx(0): Option "DPMS" "true"
[ 2142.931] (==) fglrx(0): RGB weight 888
[ 2142.931] (II) fglrx(0): Using 8 bits per RGB
[ 2142.931] (==) fglrx(0): Buffer Tiling is ON
[ 2142.931] (II) Loading sub module "fglrxdrm"
[ 2142.931] (II) LoadModule: "fglrxdrm"
[ 2142.931] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2142.931] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 2142.931] compiled for 1.4.99.906, module version = 8.97.2
[ 2142.932] ukiDynamicMajor: found major device number 250
[ 2142.932] ukiDynamicMajor: found major device number 250
[ 2142.932] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2142.932] ukiOpenDevice: node name is /dev/ati/card0
[ 2142.932] ukiOpenDevice: open result is 11, (OK)
[ 2142.932] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2142.932] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2142.933] (**) fglrx(0): NoAccel = NO
[ 2142.933] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 2142.933] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4670" (Chipset = 0x9488)
[ 2142.933] (--) fglrx(0): (PciSubVendor = 0x106b, PciSubDevice = 0x00b6)
[ 2142.933] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 2142.933] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2142.933] (--) fglrx(0): MMIO registers at 0xd0220000
[ 2142.933] (--) fglrx(0): I/O port at 0x00001000
[ 2142.933] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2142.933] (II) fglrx(0): AC Adapter is used
[ 2142.940] (EE) fglrx(0): V_BIOS address 0xd00 out of range
[ 2142.940] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
[ 2143.157] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 2143.157] (--) fglrx(0): Video RAM: 262144 kByte, Type: GDDR3
[ 2143.157] (II) fglrx(0): PCIE card detected
[ 2143.157] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2143.157] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2143.158] (II) fglrx(0): Using adapter: 2:0.0.
[ 2143.257] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x10000000)
[ 2143.271] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 2143.271] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2143.271] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2143.271] (==) fglrx(0): Center Mode is disabled
[ 2143.271] (II) Loading sub module "fb"
[ 2143.271] (II) LoadModule: "fb"
[ 2143.271] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2143.272] (II) Module fb: vendor="X.Org Foundation"
[ 2143.272] compiled for 1.12.4, module version = 1.0.0
[ 2143.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2143.272] (II) Loading sub module "ddc"
[ 2143.272] (II) LoadModule: "ddc"
[ 2143.272] (II) Module "ddc" already built-in
[ 2143.423] (II) fglrx(0): Finished Initialize PPLIB!
[ 2143.428] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 2143.428] (II) fglrx(0): Output DFP1 has no monitor section
[ 2143.428] (II) fglrx(0): Output DFP2 has no monitor section
[ 2143.428] (II) fglrx(0): Output CRT2 has no monitor section
[ 2143.428] (II) Loading sub module "ddc"
[ 2143.428] (II) LoadModule: "ddc"
[ 2143.428] (II) Module "ddc" already built-in
[ 2143.428] (II) fglrx(0): Connected Display0: LVDS
[ 2143.428] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2143.428] (II) fglrx(0): Manufacturer: APP Model: 9cbc Serial#: 16843009
[ 2143.428] (II) fglrx(0): Year: 2009 Week: 26
[ 2143.428] (II) fglrx(0): EDID Version: 1.4
[ 2143.428] (II) fglrx(0): Digital Display Input
[ 2143.428] (II) fglrx(0): 8 bits per channel
[ 2143.428] (II) fglrx(0): Digital interface is undefined
[ 2143.428] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2143.428] (II) fglrx(0): Gamma: 2.20
[ 2143.428] (II) fglrx(0): DPMS capabilities: Off
[ 2143.428] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 2143.428] (II) fglrx(0): Default color space is primary color space
[ 2143.428] (II) fglrx(0): First detailed timing is preferred mode
[ 2143.428] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 2143.428] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
[ 2143.428] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 2143.428] (II) fglrx(0): Supported established timings:
[ 2143.428] (II) fglrx(0): Manufacturer's mask: 10
[ 2143.428] (II) fglrx(0): Supported detailed timing:
[ 2143.428] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
[ 2143.428] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 2143.428] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 2143.428] (II) fglrx(0): Unknown vendor-specific block 1
[ 2143.428] (II) fglrx(0): LM215WF3-SLA1
[ 2143.428] (II) fglrx(0): Monitor name: Color LCD
[ 2143.428] (II) fglrx(0): EDID (in hex):
[ 2143.428] (II) fglrx(0): 00ffffffffffff000610bc9c01010101
[ 2143.428] (II) fglrx(0): 1a130104a0301b78266fb1a7554c9e25
[ 2143.428] (II) fglrx(0): 0c505400001001010101010101010101
[ 2143.428] (II) fglrx(0): 0101010101011a3680a070381f403020
[ 2143.428] (II) fglrx(0): 3500db0b1100001a0000000100061030
[ 2143.428] (II) fglrx(0): 11000000000000000a20000000fe004c
[ 2143.428] (II) fglrx(0): 4d3231355746332d534c4131000000fc
[ 2143.428] (II) fglrx(0): 00436f6c6f72204c43440a20202000ba
[ 2143.428] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2143.455] (II) fglrx(0): EDID for output LVDS
[ 2143.455] (II) fglrx(0): Manufacturer: APP Model: 9cbc Serial#: 16843009
[ 2143.455] (II) fglrx(0): Year: 2009 Week: 26
[ 2143.455] (II) fglrx(0): EDID Version: 1.4
[ 2143.455] (II) fglrx(0): Digital Display Input
[ 2143.455] (II) fglrx(0): 8 bits per channel
[ 2143.455] (II) fglrx(0): Digital interface is undefined
[ 2143.455] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2143.455] (II) fglrx(0): Gamma: 2.20
[ 2143.455] (II) fglrx(0): DPMS capabilities: Off
[ 2143.455] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 2143.455] (II) fglrx(0): Default color space is primary color space
[ 2143.455] (II) fglrx(0): First detailed timing is preferred mode
[ 2143.455] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 2143.455] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
[ 2143.455] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 2143.455] (II) fglrx(0): Supported established timings:
[ 2143.455] (II) fglrx(0): Manufacturer's mask: 10
[ 2143.455] (II) fglrx(0): Supported detailed timing:
[ 2143.455] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
[ 2143.455] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 2143.455] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 2143.455] (II) fglrx(0): Unknown vendor-specific block 1
[ 2143.455] (II) fglrx(0): LM215WF3-SLA1
[ 2143.455] (II) fglrx(0): Monitor name: Color LCD
[ 2143.455] (II) fglrx(0): EDID (in hex):
[ 2143.455] (II) fglrx(0): 00ffffffffffff000610bc9c01010101
[ 2143.455] (II) fglrx(0): 1a130104a0301b78266fb1a7554c9e25
[ 2143.455] (II) fglrx(0): 0c505400001001010101010101010101
[ 2143.455] (II) fglrx(0): 0101010101011a3680a070381f403020
[ 2143.455] (II) fglrx(0): 3500db0b1100001a0000000100061030
[ 2143.455] (II) fglrx(0): 11000000000000000a20000000fe004c
[ 2143.455] (II) fglrx(0): 4d3231355746332d534c4131000000fc
[ 2143.455] (II) fglrx(0): 00436f6c6f72204c43440a20202000ba
[ 2143.455] (II) fglrx(0): EDID vendor "APP", prod id 40124
[ 2143.455] (II) fglrx(0): Printing DDC gathered Modelines:
[ 2143.455] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 2143.455] (II) fglrx(0): Printing probed modes for output LVDS
[ 2143.455] (II) fglrx(0): Modeline "1400x1050"x60.0 108.00 1400 1444 1556 1684 1050 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1444 1556 1684 1024 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1444 1556 1684 960 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1444 1556 1684 800 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1444 1556 1684 864 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1444 1556 1684 768 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1444 1556 1684 720 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1024x768"x60.0 108.00 1024 1444 1556 1684 768 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "1024x600"x60.0 108.00 1024 1444 1556 1684 600 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "800x600"x60.0 108.00 800 1444 1556 1684 600 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "800x480"x60.0 108.00 800 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "720x480"x60.0 108.00 720 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): Modeline "640x480"x60.0 108.00 640 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
[ 2143.455] (II) fglrx(0): EDID for output DFP1
[ 2143.455] (II) fglrx(0): EDID for output DFP2
[ 2143.455] (II) fglrx(0): EDID for output CRT2
[ 2143.455] (II) fglrx(0): Output LVDS connected
[ 2143.455] (II) fglrx(0): Output DFP1 disconnected
[ 2143.455] (II) fglrx(0): Output DFP2 disconnected
[ 2143.455] (II) fglrx(0): Output CRT2 disconnected
[ 2143.455] (II) fglrx(0): Using exact sizes for initial modes
[ 2143.455] (II) fglrx(0): Output LVDS using initial mode 1400x1050
[ 2143.455] (II) fglrx(0): Display dimensions: (480, 270) mm
[ 2143.455] (II) fglrx(0): DPI set to (74, 98)
[ 2143.455] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4670 has 2 configurable heads and 1 displays connected.
[ 2143.455] (==) fglrx(0): PseudoColor visuals disabled
[ 2143.455] (II) Loading sub module "ramdac"
[ 2143.455] (II) LoadModule: "ramdac"
[ 2143.455] (II) Module "ramdac" already built-in
[ 2143.455] (==) fglrx(0): NoDRI = NO
[ 2143.455] (==) fglrx(0): Capabilities: 0x00000000
[ 2143.455] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2143.455] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2143.455] (==) fglrx(0): UseFastTLS=0
[ 2143.455] (==) fglrx(0): BlockSignalsOnLock=1
[ 2143.455] (--) Depth 24 pixmap format is 32 bpp
[ 2143.456] (II) Loading extension ATIFGLRXDRI
[ 2143.456] (II) fglrx(0): doing swlDriScreenInit
[ 2143.456] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2143.456] ukiDynamicMajor: found major device number 250
[ 2143.456] ukiDynamicMajor: found major device number 250
[ 2143.456] ukiDynamicMajor: found major device number 250
[ 2143.456] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2143.456] ukiOpenDevice: node name is /dev/ati/card0
[ 2143.456] ukiOpenDevice: open result is 12, (OK)
[ 2143.456] ukiOpenByBusid: ukiOpenMinor returns 12
[ 2143.456] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2143.456] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2143.456] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2143.456] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x26000
[ 2143.456] (II) fglrx(0): [uki] mapped SAREA 0x26000 to 0x7f222ea1b000
[ 2143.456] (II) fglrx(0): [uki] framebuffer handle = 0x27000
[ 2143.456] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2143.456] (II) fglrx(0): swlDriScreenInit done
[ 2143.456] (II) fglrx(0): Kernel Module Version Information:
[ 2143.456] (II) fglrx(0): Name: fglrx
[ 2143.456] (II) fglrx(0): Version: 8.97.2
[ 2143.456] (II) fglrx(0): Date: Nov 16 2012
[ 2143.456] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 2143.456] (II) fglrx(0): Kernel Module version matches driver.
[ 2143.456] (II) fglrx(0): Kernel Module Build Time Information:
[ 2143.456] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.7.10-1-ARCH
[ 2143.456] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 2143.456] (II) fglrx(0): Build-Kernel __SMP__: no
[ 2143.456] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2143.456] (II) fglrx(0): [uki] register handle = 0x00028000
[ 2143.475] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[ 2143.475] (II) fglrx(0): Shutdown CMMQS
[ 2143.475] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2143.475] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x26000 at 0x7f222ea1b000
[ 2143.475] (WW) fglrx(0): ***********************************************************
[ 2143.475] (WW) fglrx(0): * DRI initialization failed *
[ 2143.475] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 2143.475] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 2143.475] (WW) fglrx(0): ***********************************************************
[ 2143.475]
Fatal server error:
[ 2143.475] AddScreen/ScreenInit failed for driver 0
[ 2143.475]
[ 2143.475]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2143.475] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2143.475]
[ 2143.498] Server terminated with error (1). Closing log file.
[ 2143.475] (WW) fglrx(0): ***********************************************************
[ 2143.475] (WW) fglrx(0): * DRI initialization failed *
[ 2143.475] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 2143.475] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 2143.475] (WW) fglrx(0): ***********************************************************
Have you gone over this section of the wiki and made sure everything is done? Are you using the legacy driver? If so how did you install it, and from where?
Last edited by Kilz (2013-03-09 13:01:00)
Similar Messages
-
Lag when dragging windows and scrolling, using ATI Proprietary drivers
Ok, so I've installed Arch Linux on my Desktop PC, and on top of that I'm using Gnome as my GUI. Because I am addicted to Minecraft, I wanted to play it as soon as possible, but I got this error telling me to install my graphiccard drivers. And so I installed the "ATI Proprietary Driver".
After rebooting my computer I noticed that when I drag windows around or scroll inside them, it lags, though I have no problems watching movies. And still Minecraft complains about graphic drivers!
I'm not a pro at Linux so I would really like some help here, because I don't know what to do.
:EDIT:
Think I solved it! I just ran the installation one more time and now there's no lag? Hmm...
/Znax
Last edited by ZnaxQue (2011-05-21 21:36:20)https://wiki.archlinux.org/index.php/Catalyst
- xorg-server 1.12 is in [extra] repo, catalyst does not support it so please use [xorg111] repo. -
X fails with new catalyst drivers
I'm running 64bit arch and i just upgraded to the new catalyst drivers from AUR (9.4). When I try to run xorg now, it fails (screen just goes black and I can't switch to any of the vcs or kill X). The X log file says that it can't load the glx module because it doesn't exist. I'm not entirely clear on modules and how they work, but what should I do to try and get X working?
Gratias vobi ago!
Last edited by Qvintvs (2009-03-28 17:08:54)I'm running a Radeon HD 4870 x2. I've been trying some things, and now I dont get the missing glx error. I do get these errors:
(EE) Failed to load module "dri2" (module does not exist, 0)
(EE) Failed to load module "record" (module does not exist, 0)
(EE) fglrx(0): Unknown EDID version 0
Though it appears that X keeps going past all three of these. Here's my entire log: http://pastebin.com/f5153ff39 . Here's the xorg.conf file aticonfig generated with the unused device, monitor, and screen sections commented out: http://pastebin.com/f1e765d83 .
Any help on where to go next would really be appreciated, I've been at this for over a day now.
jun, I think the wiki discourages getting the drivers from the amd site directly, though given the success (or lack thereof) I'm having with the AUR drivers, I can't say (personally) that they're any better.
Last edited by Qvintvs (2009-03-29 19:18:06) -
Probs with ATI Catalysts Drivers
I’m currently using ATI Catalyst Drivers 6.14.10.6404 (3.9) for my ATI Radeon 9600xt.
If I upgrade to the latest ATI or Omega Drivers (4.7 I think), my card crashes and is very unstable.
my current graphics settings are:
enabled VPU recover
fast write is on
AGPx8
Why does 3.9 work and 4.7 not work, I have only had this problem since changing to this board.
Any help appreciated.Well I hope it works for you engrrowl! I was installing a slipstreamed version of XP with SP2. But that sure didn't help me. I would randomly have my screen corrupt with my 9700. And that stupid card has given me headaches since I got an LCD. So driver incompatibility used to make my screen go black all the time. It would then revert to normal (maybe!). But there were many times I had to shutdown by the keyboard and disconnect the DVI cable to get it to work again. And the LCD is a Samsung so it's not cheap.
I broke down the other night and when I had to reinstall WinXP from scratch I reverted to an older GF4. This morning I ordered a Geforce 6800, and it will "upgrade" fine. But if I tried to go from an ATI to an Nvidia I would have had to reload my OS again. So it worked out for me.
But it's strange that switching video cards solved all my "issues". That and the fact that I've never really like ATI's drivers means I will never get another of their cards. -
Problems with Ati Propietary drivers, Yaourt
Im an ubuntu refugee and a nub-zilla i will try to include as much information as possible and hope fuly get some help. Thanks in advance!
Arch x86_64
I am attempting to install the propietary ati drivers using yaourt from aur
I have base and base-devel installed (notsure if that matters)
to find it i issed th command: yaourt catalyst-utils
the first option is the one i attempt to install
yaourt -S /aur/catalyst-utils 9.8-1
everything goes smoothly until the very end
"Finished making: catalyst 9.8-1 x86_64"
"Continue installing catalyst utils? [Y/n]
y
Password
"loading package data..."
"checking dependencies..."
"error: replacing packages with -U is not supported yet"
"error: you can replace packages manually using -Rd and -U"
"error: failed to prepare transaction (conflicting dependencies)"
": : catalyst-utils: conflicts with libgl"
==>WARNING: You package is saved in blah blah blah
any suggestions as to how to get this working would be amazingly helpful, im such a nub that im not sure which part of all of this information is useful
anyway thanks again!I have another problem. I install everything properly, reboot my system and dmesg shows fglrx has loaded fine (added it to rc.conf). But when I startx my monitor is left black and my system unresponsive. Cannot get a log for this attempt of x session (not even with startx > xlog). And following the wiki does not solve my problem (it says to delete /etc/ati/amdpcsdb.
Kernel: 2.6.30-ARCH x86_64
X: xorg-server 1.6.3.901-1
Last edited by ldvx (2009-09-12 03:06:08) -
[SOLVED] Artifacts with EXAPixmap ON and KMS with ATI OSS drivers
I had some problems for many months on my Arch Linux installation and I couldnt figure out what was causing it, so, because I found the sollution, I wanted to post it here and share it with you.
I, like others, was experiencing huge artifacts with KMS and EXAPixmaps on, on various cases, visuals and textures. After fiddling with all radeon options in xorg.conf and KMS on/off I found out thats its best for me to have KMS on (I couldnt play wine games otherwise) and EXAPixmaps off. But then again, when EXAPixmaps was off, I had poor 2D performance with KMS on, Xrender acceleration wasnt working and was falling back to software engine. Solution came from something that was brought to my attention in this topic. I ve set ARGB visuals off, raster engine for rendering and tried EXAPixmaps on.
It worked! Everything are as they supposed to be. Xrender engine and composite manager are finally working, no more artifacts. Framebuffer memory on my radeon card was somehow cleared. I then later found out an awkward solution on how to clear it by demand... Start X with vesa driver... then fix again xorg.conf back to radeon driver and reboot.
Now I have both 2D and 3D acceleration, I am logged in with KDE and have good performance. My glxgears output is 1000 to 1150 fps (vsync off) and I am using Xrender for the KDE desktop effects.
EDIT: I must clarify that I have an ATI Radeon 9200 Mobility M9+ (R200 serries)
Last edited by twilight0 (2011-05-13 20:30:27)I 've made some more edits and this is my current xorg.conf
http://pastebin.com/x6ubG80K
I have ColorTiling set on for performance, be careful as it may be resource hungry in 3D apps but it increases dramatically fps.
You can try setting off EXAPixmaps as well and see how it goes, but then you ll have poor 2D performance and yet videos will play just fine either way. -
I installed arch base and pacman'd xorg and startx. Downloaded xf86-video-i810. I ran Xorg -configure. Made sure mouse pointed at /dev/input/mice.
Startx produces no errors but just quits.
˝/.xinitrc has one line in it: exec fluxbox (or exec enlightenment)
Does $PATH have anything to do with it ?
Here is my xorg.conf which I have messed around with many times now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "xtrap"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 1024 768
Depth 1
EndSubSection
SubSection "Display"
Viewport 1024 768
Depth 4
EndSubSection
SubSection "Display"
Viewport 1024 768
Depth 8
EndSubSection
SubSection "Display"
Viewport 1024 768
Depth 15
EndSubSection
SubSection "Display"
Viewport 1024 768
Depth 16
EndSubSection
SubSection "Display"
Viewport 1024 768
Depth 24
EndSubSection
EndSection
[/quote]My /etc/inittab:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
id:3:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty 38400 vc/6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
x:5:respawn:/usr/bin/xdm -nodaemon
# End of file
I found no EE's. The last few of Xorg.0.log:
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd093f000 at 0xb78a1000
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
the saved state
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(WW) I810(0): Successfully set original devices (2)
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.
Will try to test it with VESA driver. Should I just replace i810 with VESA in xorg.conf then ? -
[SOLVED]Problem installing ATI catalyst drivers
Hello arch users, ive been having trouble when installing the ati proprietary drivers through pacman. I followed the wiki and added the catalyst repo into my pacman.conf file. however when i type in sudo pacman -Syu i get this:
:: Synchronizing package databases...
error: failed retrieving file 'catalyst.db' from catalyst.apocalypsus.net : The requested URL returned error: 404
error: failed to update catalyst (download library error)
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
there is nothing to do
and when i try to install catalyst and catalyst-utils i get this as an output:
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils and libgl are in conflict. Remove libgl? [y/N] y
:: catalyst and ati-dri are in conflict. Remove ati-dri? [y/N] y
Targets (6): ati-dri-8.0.4-1 [removal] libgl-8.0.4-1 [removal]
netkit-bsd-finger-0.17-7 xinetd-2.3.15-2 catalyst-12.6-3
catalyst-utils-12.6-1
Total Installed Size: 121.91 MiB
Net Upgrade Size: 74.13 MiB
Proceed with installation? [Y/n] y
(4/4) checking package integrity [######################] 100%
error: catalyst-utils: signature from "Vi0L0 <[email protected]>" is unknown trust
error: catalyst: signature from "Vi0L0 <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
any idea on what to do?
i want to use the proprietary over the open source because it gives me less problems when using 3d rendering.
or are there any other ways of installing these packages other than pacman?
Last edited by CokaBear (2012-07-19 19:45:35)You could add 'SigLevel = Never' under the catalyst repo in pacman.conf, so that it doesn't check for package integrity.
And about the 404, maybe your 'Server' is incorrect. I use 'Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch' -
Black screen on startx with ati radeon HD4330 Mobility and fglrx
Hi,
I managed to install Archlinux on my HP Butterfly laptop that's great !
However I am not able to get X running properly.
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series]
Firstly I tried to use the xf86-video-ati open source driver but it made my kernel crash during the module init.
So I am now trying fglrx, and at least my kernel is unharmed.
But all I get is a black screen after running startx.
Here is my X log :
[ 95.354]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 95.354] X Protocol Version 11, Revision 0
[ 95.354] Build Operating System: Linux 2.6.35-ARCH i686
[ 95.354] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011 i686
[ 95.355] Kernel command line: root=/dev/sda7 ro nomodeset
[ 95.355] Build Date: 01 November 2010 10:35:30PM
[ 95.355]
[ 95.362] Current version of pixman: 0.20.2
[ 95.363] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 95.363] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 95.364] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 9 20:52:31 2011
[ 95.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 95.408] (==) ServerLayout "aticonfig Layout"
[ 95.408] (**) |-->Screen "base-screen" (0)
[ 95.408] (**) | |-->Monitor "native-monitor"
[ 95.408] (**) | |-->Device "radeon-4330HD"
[ 95.408] (==) Automatically adding devices
[ 95.408] (==) Automatically enabling devices
[ 95.467] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.467] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.489] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 95.489] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 95.489] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 95.489] (II) Loader magic: 0x81f1f80
[ 95.489] (II) Module ABI versions:
[ 95.490] X.Org ANSI C Emulation: 0.4
[ 95.490] X.Org Video Driver: 8.0
[ 95.490] X.Org XInput driver : 11.0
[ 95.490] X.Org Server Extension : 4.0
[ 95.491] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0281 rev 7, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004110/8
[ 95.491] (--) PCI: (0:1:0:0) 1002:9552:1025:0281 rev 0, Mem @ 0xd0000000/268435456, 0xf4400000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 95.491] (II) Open ACPI successful (/var/run/acpid.socket)
[ 95.491] (II) "extmod" will be loaded by default.
[ 95.491] (II) "dbe" will be loaded by default.
[ 95.491] (II) "glx" will be loaded by default.
[ 95.491] (II) "record" will be loaded by default.
[ 95.492] (II) "dri" will be loaded by default.
[ 95.492] (II) "dri2" will be loaded by default.
[ 95.492] (II) LoadModule: "extmod"
[ 95.492] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 95.506] (II) Module extmod: vendor="X.Org Foundation"
[ 95.506] compiled for 1.9.2, module version = 1.0.0
[ 95.506] Module class: X.Org Server Extension
[ 95.506] ABI class: X.Org Server Extension, version 4.0
[ 95.506] (II) Loading extension MIT-SCREEN-SAVER
[ 95.506] (II) Loading extension XFree86-VidModeExtension
[ 95.506] (II) Loading extension XFree86-DGA
[ 95.506] (II) Loading extension DPMS
[ 95.506] (II) Loading extension XVideo
[ 95.506] (II) Loading extension XVideo-MotionCompensation
[ 95.506] (II) Loading extension X-Resource
[ 95.506] (II) LoadModule: "dbe"
[ 95.506] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 95.509] (II) Module dbe: vendor="X.Org Foundation"
[ 95.509] compiled for 1.9.2, module version = 1.0.0
[ 95.509] Module class: X.Org Server Extension
[ 95.509] ABI class: X.Org Server Extension, version 4.0
[ 95.509] (II) Loading extension DOUBLE-BUFFER
[ 95.509] (II) LoadModule: "glx"
[ 95.510] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 95.528] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 95.528] compiled for 7.6.0, module version = 1.0.0
[ 95.529] (II) Loading extension GLX
[ 95.529] (II) LoadModule: "record"
[ 95.529] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 95.529] (II) Module record: vendor="X.Org Foundation"
[ 95.529] compiled for 1.9.2, module version = 1.13.0
[ 95.529] Module class: X.Org Server Extension
[ 95.529] ABI class: X.Org Server Extension, version 4.0
[ 95.529] (II) Loading extension RECORD
[ 95.529] (II) LoadModule: "dri"
[ 95.530] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 95.535] (II) Module dri: vendor="X.Org Foundation"
[ 95.535] compiled for 1.9.2, module version = 1.0.0
[ 95.535] ABI class: X.Org Server Extension, version 4.0
[ 95.535] (II) Loading extension XFree86-DRI
[ 95.535] (II) LoadModule: "dri2"
[ 95.535] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 95.536] (II) Module dri2: vendor="X.Org Foundation"
[ 95.536] compiled for 1.9.2, module version = 1.2.0
[ 95.536] ABI class: X.Org Server Extension, version 4.0
[ 95.536] (II) Loading extension DRI2
[ 95.536] (II) LoadModule: "fglrx"
[ 95.536] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 95.719] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 95.731] compiled for 1.4.99.906, module version = 8.81.5
[ 95.731] Module class: X.Org Video Driver
[ 95.736] (II) Loading sub module "fglrxdrm"
[ 95.736] (II) LoadModule: "fglrxdrm"
[ 95.736] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.765] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 95.765] compiled for 1.4.99.906, module version = 8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Version Identifier:8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Release Identifier: 8.812
[ 95.765] (II) ATI Proprietary Linux Driver Build Date: Jan 4 2011 21:30:56
[ 95.765] (--) using VT number 7
[ 95.767] (WW) Falling back to old probe method for fglrx
[ 95.852] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 95.861] (--) Chipset Supported AMD Graphics Processor (0x9552) found
[ 95.862] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 95.862] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 95.871] (II) AMD Video driver is signed
[ 95.871] (II) fglrx(0): pEnt->device->identifier=0x8f63678
[ 95.872] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 95.873] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 95.873] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 95.873] (==) fglrx(0): Default visual is TrueColor
[ 95.873] (**) fglrx(0): Option "DPMS" "true"
[ 95.873] (==) fglrx(0): RGB weight 888
[ 95.873] (II) fglrx(0): Using 8 bits per RGB
[ 95.873] (==) fglrx(0): Buffer Tiling is ON
[ 95.874] (II) Loading sub module "fglrxdrm"
[ 95.874] (II) LoadModule: "fglrxdrm"
[ 95.874] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 95.876] ukiOpenDevice: node name is /dev/ati/card0
[ 95.876] ukiOpenDevice: open result is 11, (OK)
[ 95.876] ukiOpenByBusid: ukiOpenMinor returns 11
[ 95.876] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 95.876] (==) fglrx(0): NoAccel = NO
[ 95.876] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 95.876] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4300 Series" (Chipset = 0x9552)
[ 95.876] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0281)
[ 95.876] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 95.876] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 95.876] (--) fglrx(0): MMIO registers at 0xf4400000
[ 95.876] (--) fglrx(0): I/O port at 0x00003000
[ 95.877] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 95.889] (II) fglrx(0): AC Adapter is used
[ 96.174] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 96.174] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 96.174] (II) fglrx(0): PCIE card detected
[ 96.174] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 96.174] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 96.180] (II) fglrx(0): Using adapter: 1:0.0.
[ 96.224] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 96.453] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 96.453] (II) fglrx(0): RandR 1.2 support is enabled!
[ 96.453] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 96.453] (==) fglrx(0): Center Mode is disabled
[ 96.453] (II) Loading sub module "fb"
[ 96.453] (II) LoadModule: "fb"
[ 96.454] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 96.475] (II) Module fb: vendor="X.Org Foundation"
[ 96.475] compiled for 1.9.2, module version = 1.0.0
[ 96.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.475] (II) Loading sub module "ddc"
[ 96.475] (II) LoadModule: "ddc"
[ 96.475] (II) Module "ddc" already built-in
[ 96.725] (II) fglrx(0): Finished Initialize PPLIB!
[ 96.773] (II) fglrx(0): Output LVDS using monitor section native-monitor
[ 96.773] (II) fglrx(0): Output DFP1 has no monitor section
[ 96.773] (II) fglrx(0): Output CRT1 has no monitor section
[ 96.785] (II) Loading sub module "ddc"
[ 96.785] (II) LoadModule: "ddc"
[ 96.786] (II) Module "ddc" already built-in
[ 96.786] (II) fglrx(0): Connected Display0: LVDS
[ 96.786] (II) fglrx(0): Display0: Failed to get EDID information.
[ 96.862] (II) fglrx(0): Cannot get EDID information for LVDS
[ 96.862] (II) fglrx(0): EDID for output LVDS
[ 96.862] (II) fglrx(0): Not using mode "640x350" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "720x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "848x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1024x768i" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1152x864" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (monitor doesn't support reduced blanking)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Printing probed modes for output LVDS
[ 96.881] (II) fglrx(0): Modeline "1366x768"x60.0 69.50 1366 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x768"x60.0 69.50 1280 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x720"x60.0 69.50 1280 1414 1446 1466 720 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x768"x60.0 69.50 1024 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x600"x60.0 69.50 1024 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x600"x60.0 69.50 800 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x480"x60.0 69.50 800 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "720x480"x60.0 69.50 720 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "640x480"x60.0 69.50 640 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): EDID for output DFP1
[ 96.881] (II) fglrx(0): EDID for output CRT1
[ 96.881] (II) fglrx(0): Output LVDS connected
[ 96.881] (II) fglrx(0): Output DFP1 disconnected
[ 96.882] (II) fglrx(0): Output CRT1 disconnected
[ 96.882] (II) fglrx(0): Using exact sizes for initial modes
[ 96.882] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 96.882] (II) fglrx(0): DPI set to (96, 96)
[ 96.882] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4300 Series has 2 configurable heads and 1 displays connected.
[ 96.882] (==) fglrx(0): PseudoColor visuals disabled
[ 96.882] (II) Loading sub module "ramdac"
[ 96.882] (II) LoadModule: "ramdac"
[ 96.882] (II) Module "ramdac" already built-in
[ 96.882] (==) fglrx(0): NoDRI = NO
[ 96.882] (==) fglrx(0): Capabilities: 0x00000000
[ 96.882] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 96.882] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 96.882] (==) fglrx(0): UseFastTLS=0
[ 96.882] (==) fglrx(0): BlockSignalsOnLock=1
[ 96.882] (--) Depth 24 pixmap format is 32 bpp
[ 96.882] (II) Loading extension ATIFGLRXDRI
[ 96.882] (II) fglrx(0): doing swlDriScreenInit
[ 96.882] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.883] ukiDynamicMajor: found major device number 252
[ 96.883] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 96.883] ukiOpenDevice: node name is /dev/ati/card0
[ 96.883] ukiOpenDevice: open result is 12, (OK)
[ 96.883] ukiOpenByBusid: ukiOpenMinor returns 12
[ 96.883] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 96.883] (II) fglrx(0): [uki] DRM interface version 1.0
[ 96.883] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 96.883] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 96.883] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb76f0000
[ 96.883] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 96.883] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 96.883] (II) fglrx(0): swlDriScreenInit done
[ 96.883] (II) fglrx(0): Kernel Module Version Information:
[ 96.883] (II) fglrx(0): Name: fglrx
[ 96.883] (II) fglrx(0): Version: 8.81.5
[ 96.883] (II) fglrx(0): Date: Jan 4 2011
[ 96.883] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 96.883] (II) fglrx(0): Kernel Module version matches driver.
[ 96.883] (II) fglrx(0): Kernel Module Build Time Information:
[ 96.883] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-ARCH
[ 96.883] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 96.883] (II) fglrx(0): Build-Kernel __SMP__: no
[ 96.883] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 96.883] (II) fglrx(0): [uki] register handle = 0x00004000
[ 96.922] (II) fglrx(0): DRI initialization successfull
[ 96.922] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 96.933] (==) fglrx(0): Backing store disabled
[ 96.933] (II) Loading extension FGLRXEXTENSION
[ 96.933] (**) fglrx(0): DPMS enabled
[ 96.934] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 96.934] (**) fglrx(0): Textured Video is enabled.
[ 96.934] (II) LoadModule: "glesx"
[ 96.944] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 97.061] (II) Module glesx: vendor="X.Org Foundation"
[ 97.062] compiled for 1.4.99.906, module version = 1.0.0
[ 97.062] (II) Loading extension GLESX
[ 97.062] (II) fglrx(0): GLESX enableFlags = 528
[ 97.062] (II) fglrx(0): GLESX is enabled
[ 97.062] (II) LoadModule: "amdxmm"
[ 97.062] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 97.072] (II) Module amdxmm: vendor="X.Org Foundation"
[ 97.072] compiled for 1.4.99.906, module version = 2.0.0
[ 97.072] (II) Loading extension AMDXVOPL
[ 97.072] (II) Loading extension AMDXVBA
[ 97.091] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 97.094] (II) fglrx(0): Enable composite support successfully
[ 97.094] (WW) fglrx(0): Option "VendorName" is not used
[ 97.094] (WW) fglrx(0): Option "ModelName" is not used
[ 97.094] (II) fglrx(0): X context handle = 0x1
[ 97.094] (II) fglrx(0): [DRI] installation complete
[ 97.094] (==) fglrx(0): Silken mouse enabled
[ 97.101] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 97.101] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 97.101] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 97.101] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 98.234] (--) RandR disabled
[ 98.234] (II) Initializing built-in extension Generic Event Extension
[ 98.234] (II) Initializing built-in extension SHAPE
[ 98.234] (II) Initializing built-in extension MIT-SHM
[ 98.234] (II) Initializing built-in extension XInputExtension
[ 98.234] (II) Initializing built-in extension XTEST
[ 98.234] (II) Initializing built-in extension BIG-REQUESTS
[ 98.234] (II) Initializing built-in extension SYNC
[ 98.234] (II) Initializing built-in extension XKEYBOARD
[ 98.234] (II) Initializing built-in extension XC-MISC
[ 98.234] (II) Initializing built-in extension SECURITY
[ 98.234] (II) Initializing built-in extension XINERAMA
[ 98.234] (II) Initializing built-in extension XFIXES
[ 98.234] (II) Initializing built-in extension RENDER
[ 98.234] (II) Initializing built-in extension RANDR
[ 98.234] (II) Initializing built-in extension COMPOSITE
[ 98.234] (II) Initializing built-in extension DAMAGE
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 98.240] ukiOpenDevice: node name is /dev/ati/card0
[ 98.240] ukiOpenDevice: open result is 13, (OK)
[ 98.240] ukiOpenByBusid: ukiOpenMinor returns 13
[ 98.240] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 98.965] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 99.057] (II) fglrx(0): Enable the clock gating!
[ 99.058] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 99.597] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 99.597] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.597] (II) LoadModule: "evdev"
[ 99.611] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 99.622] (II) Module evdev: vendor="X.Org Foundation"
[ 99.622] compiled for 1.9.0, module version = 2.5.0
[ 99.622] Module class: X.Org XInput Driver
[ 99.622] ABI class: X.Org XInput driver, version 11.0
[ 99.622] (**) Power Button: always reports core events
[ 99.622] (**) Power Button: Device: "/dev/input/event5"
[ 99.630] (--) Power Button: Found keys
[ 99.630] (II) Power Button: Configuring as keyboard
[ 99.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.630] (**) Option "xkb_rules" "evdev"
[ 99.630] (**) Option "xkb_model" "evdev"
[ 99.630] (**) Option "xkb_layout" "us"
[ 99.695] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 99.695] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.695] (**) Video Bus: always reports core events
[ 99.695] (**) Video Bus: Device: "/dev/input/event7"
[ 99.703] (--) Video Bus: Found keys
[ 99.703] (II) Video Bus: Configuring as keyboard
[ 99.703] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.703] (**) Option "xkb_rules" "evdev"
[ 99.703] (**) Option "xkb_model" "evdev"
[ 99.703] (**) Option "xkb_layout" "us"
[ 99.704] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 99.704] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.704] (**) Video Bus: always reports core events
[ 99.704] (**) Video Bus: Device: "/dev/input/event8"
[ 99.713] (--) Video Bus: Found keys
[ 99.713] (II) Video Bus: Configuring as keyboard
[ 99.713] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.713] (**) Option "xkb_rules" "evdev"
[ 99.713] (**) Option "xkb_model" "evdev"
[ 99.713] (**) Option "xkb_layout" "us"
[ 99.731] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 99.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.731] (**) Power Button: always reports core events
[ 99.731] (**) Power Button: Device: "/dev/input/event1"
[ 99.753] (--) Power Button: Found keys
[ 99.753] (II) Power Button: Configuring as keyboard
[ 99.753] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.753] (**) Option "xkb_rules" "evdev"
[ 99.753] (**) Option "xkb_model" "evdev"
[ 99.753] (**) Option "xkb_layout" "us"
[ 99.754] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 99.754] (II) No input driver/identifier specified (ignoring)
[ 99.754] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 99.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 99.755] (**) Sleep Button: always reports core events
[ 99.755] (**) Sleep Button: Device: "/dev/input/event4"
[ 99.770] (--) Sleep Button: Found keys
[ 99.770] (II) Sleep Button: Configuring as keyboard
[ 99.770] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 99.770] (**) Option "xkb_rules" "evdev"
[ 99.770] (**) Option "xkb_model" "evdev"
[ 99.770] (**) Option "xkb_layout" "us"
[ 99.773] (II) config/udev: Adding input device HD Video WebCam (/dev/input/event10)
[ 99.773] (**) HD Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 99.773] (**) HD Video WebCam: always reports core events
[ 99.773] (**) HD Video WebCam: Device: "/dev/input/event10"
[ 99.796] (--) HD Video WebCam: Found keys
[ 99.796] (II) HD Video WebCam: Configuring as keyboard
[ 99.796] (II) XINPUT: Adding extended input device "HD Video WebCam" (type: KEYBOARD)
[ 99.796] (**) Option "xkb_rules" "evdev"
[ 99.796] (**) Option "xkb_model" "evdev"
[ 99.796] (**) Option "xkb_layout" "us"
[ 99.797] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 99.798] (II) No input driver/identifier specified (ignoring)
[ 99.806] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 99.806] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 99.806] (**) AT Translated Set 2 keyboard: always reports core events
[ 99.806] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 99.823] (--) AT Translated Set 2 keyboard: Found keys
[ 99.823] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 99.823] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 99.823] (**) Option "xkb_rules" "evdev"
[ 99.823] (**) Option "xkb_model" "evdev"
[ 99.823] (**) Option "xkb_layout" "us"
[ 99.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 99.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found 10 mouse buttons
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 99.840] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 99.840] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 99.840] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 99.840] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 99.840] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 99.840] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 99.840] (II) No input driver/identifier specified (ignoring)
[ 99.841] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 99.841] (II) No input driver/identifier specified (ignoring)
[ 100.317] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 103.491] (II) fglrx(0): Preparing normal LeaveVT...
[ 103.860] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 103.860] (II) fglrx(0): Backup framebuffer data.
[ 103.860] (II) fglrx(0): Backup complete.
[ 119.766] (II) fglrx(0): Preparing normal EnterVT...
[ 119.766] (II) Open ACPI successful (/var/run/acpid.socket)
[ 119.766] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 120.803] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 121.433] (II) fglrx(0): Hot-plug event occurs on device: 1:0:0
[ 124.299] (II) fglrx(0): Preparing normal LeaveVT...
[ 124.633] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 124.633] (II) fglrx(0): Backup framebuffer data.
[ 124.633] (II) fglrx(0): Backup complete.
All seems normal to me.
Here is my X configuration (/etc/X11/xorg.conf.d/10-monitor.conf) :
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "base-screen" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "native-monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon-4330HD"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "base-screen"
Device "radeon-4330HD"
Monitor "native-monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768_60.00"
EndSubSection
EndSection
I initially wanted to use slim as a login manager but it always complains about not beeing able to connect to any X server.
As a bonus I give you my rc.conf, might be usefull :
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fglrx)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(!eth0 !wlan0)
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.100.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal acpid network !netfs crond !wicd)
I tried those tips Archlinux Catalyst Wiki but it didn't help.
I may be missing something obvious, but I am quite desperate so any help is welcome.
I can give you any other log that would be meaningfull to you.
Thanks for helping Archlinux to spread a little more.i have this problem
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M93 [Mobility Radeon HD 4500 Series]
when I have install catalyst-utils 11.1 and catalyst-daemons .after rebooting i saw a black screen.
if I install xf86-video-ati occures lots of crash of KWIN plasma desktop .
i want using Catalyst -
Xorg7: fglrx drivers fails with modprobe
Arch installed three days ago from ISO Noodle (after a crash of an old HD), have been actualised up today with xorg7. ATI Radeon 7200LE card is correctly recognised by lshwd as Radeon QD using driver 'vesa', but a display in X flitters in comparison with that in xorg6.9, where it was absolutely steady . Package ati-fglrx is installed correctly. Module 'fglrx' fails loading either placed in modules section of rc.conf or manually invoked by 'modprobe'. Configuration via 'aticonfig' led to inefficient 'xorg.conf' for missing 'fglrx'. Module path in xorg.conf is correct and ATi drivers as well as 'fglrx'module are present. Monitor section of 'xorg.conf' has propper options according the monitor specification. Any idea what is wrong and why 'fglrx' is not recognised when trying to load it? Thank you.
I think brain0 is right on this one. Your card is not offically supported by the fglrx driver as seen in this quote taken from the ati website
"The ATI Proprietary Linux driver currently supports Radeon 8500 and later AGP or PCI Express graphics products, as well as FireGL 8700 and later products. We do not currently plan to include support for any products earlier than this. Drivers for earlier products should already be available from the DRI Project or Utah-GLX project."
The opensource driver mentioned by brain0 should do the trick.
remove your ati drivers that you installed
re-install libgl-dri
install the open source ati driver "pacman -S xf86-video-ati"
change your driver line in xorg.conf to
Driver "radeon"
from what you most likely have right now...
Driver "fglrx"
that should do it!
best of luck! -
Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.
I'm setting Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.
i get the message: "setup did not find a driver compatible with your current hardware or operating system., Setup will now exit."
i think it's having problems "Extracting setup.exe" - i get the message "Cannot create setup.exe" and "Cannot create data1.cab"
help!You're welcome.
Thanks for the points.
10 points for your solution! -
Can't Install ATI Video Drivers on Bootcamp with Windows 7 64-bit
I've just installed Windows 7 64-bit under Bootcamp but can't seem to get any ATI Graphics drivers to install. I ran into the common blank-screen problem during installation and temporarily solved that by deleting atikmdag.sys from within Lion. At the moment W7 runs with 640x800 resolution (pretty chunky on a 27" screen!). The ATI Catalyst software just doesn't run at all (i.e click on it and nothing happens). I've used DriverSweeper to force remove all drivers and start again but every time I reboot, Windows automatically reinstalls the default driver that seems to be causing the problem in the first place!
For reference, here are iMac specs:
iMac 27" w/ OS X Lion 10.7.2
2.8Ghz Intel Core i7
4GB 1067Mhz DDR3 RAM
ATI Radeon HD 4850 512MB GDDR3
Any ideas?
Thanksgets asked 100s of times, daily too. check my profile bookmarks for "AMD" thread(s).
-
Install proprietary drivers for ATI HD4850, and I cant change my resol
I installed the ATI drivers from AUR, and now I cannot change my screen resolution, i get this error:
I have 2x ATI HD4850
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen 1 "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1
Driver "fglrx"
BusID "PCI:1:0:1"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
EndSection
Here is my xorg.conf
Everything was working fine on the xf86-video-ati drivers, but I want better 3D acceleration.
one screen is 1680x1050, and the other is 1440x900.
Last edited by epiclulz3212 (2010-06-21 19:39:57)its probably because there was some chatter that you have to have a patched xorg-server since xorg upgraded to 1.8. Go through the AMD/ATI Bar and Grill thread (last few pages) to see if a solution is available. But that could be old news.
Which version of catalyst drivers are you using?
Last edited by Inxsible (2010-06-21 19:39:45) -
SCCM 2007 SP2 R2--
I have copied my working task sequences for Operation System Deployment (Windows 2008 R2) because I am introducing new hardware into our environment. After adding new drivers to the Boot image and to the Drivers catalog, I am now experiencing an issues
when running the TS.
In my SMSTS.log, I see these errors:
*************** SMSTS.LOG ********************************
Processing driver match result. OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
XML parsing error at line 1 char 1: Invalid at the top level of the document.
Request failed (Code 0x80040e14) OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
bSuccess == ((VARIANT_BOOL)-1), HRESULT=80004005 (e:\nts_sms_fre\SMS\common\inc\ccmxml.h,1116) OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
spXMLDoc.loadFromXML(pszResponse), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\onlinedrivercatalog.cpp,536) OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
Server response: Request failed (Code 0x80040e14) OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
processDriverResponse( sResponseBody, fpCallbackProc, pvCallbackData, matchResultMap ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\onlinedrivercatalog.cpp,457) OSDDriverClient 7/25/2012 9:48:01
AM 1296 (0x0510)
Failed to process driver catalog response. Code 0x80004005 OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
pDriverCatalog->match( deviceList, m_fpCallbackProc, m_pvCallbackData, matchResultMap ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,854) OSDDriverClient 7/25/2012 9:48:01
AM 1296 (0x0510)
pDriverInstaller->AutoInstallDrivers( pDriverCatalog, bBestMatch ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,286) OSDDriverClient 7/25/2012 9:48:01 AM 1296
(0x0510)
Failed to auto provision driver. Code 0x80004005 OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
ProcessAutoProvision( pDriverInstaller, bBestMatch ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,415) OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
Failed to auto provision drivers. Code 0x80004005 OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
Exiting with return code 0x80004005 OSDDriverClient 7/25/2012 9:48:01 AM 1296 (0x0510)
Process completed with exit code 2147500037 TSManager 7/25/2012 9:48:01 AM 1632 (0x0660)
!--------------------------------------------------------------------------------------------! TSManager 7/25/2012 9:48:01 AM 1632 (0x0660)
Failed to run the action: Post Install - Auto Apply Drivers.
Unspecified error (Error: 80004005; Source: Windows) TSManager 7/25/2012 9:48:01 AM 1632 (0x0660)
I have also checked my NLB MP's and have found this error in the MP_DriverMgr.log
********************* MP_DriverMgr.log *******************************************
CMPDBConnection::ExecuteSQL(): ICommandText::Execute() failed with 0x80040E14 MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
======================================= MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
MPDB ERROR - CONNECTION PARAMETERS
SQL Server Name : SERVERNAME
SQL Database Name : SMS_AM0_RPL
Integrated Auth : True
MPDB ERROR - EXTENDED INFORMATION
MPDB Method : ExecuteSP()
MPDB Method HRESULT : 0x80040E14
Error Description : Syntax error or access violation
OLEDB IID : {0C733A63-2A1C-11CE-ADE5-00AA0044773D}
ProgID : Microsoft OLE DB Provider for SQL Server
MPDB ERROR - INFORMATION FROM DRIVER
null MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
=======================================
MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
Failed to execute strored procedure: MP_MatchDrivers, hr=0x80040e14 MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
Failed to execute MatchDrivers task, hr=0x80040e14 MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
Response message sent to the client MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
Failed to execute task, hr=0x80040e14 MP_DriverManager 7/24/2012 12:47:50 PM 7436 (0x1D0C)
Executing Driver Request - Match MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
XML Schema support is not installed, XML validation will be skipped. MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
CMPDBConnection::ExecuteSQL(): ICommandText::Execute() failed with 0x80040E14 MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
======================================= MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
MPDB ERROR - CONNECTION PARAMETERS
SQL Server Name : SERVERNAME
SQL Database Name : SMS_AM0_RPL
Integrated Auth : True
MPDB ERROR - EXTENDED INFORMATION
MPDB Method : ExecuteSP()
MPDB Method HRESULT : 0x80040E14
Error Description : Syntax error or access violation
OLEDB IID : {0C733A63-2A1C-11CE-ADE5-00AA0044773D}
ProgID : Microsoft OLE DB Provider for SQL Server
MPDB ERROR - INFORMATION FROM DRIVER
null MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
=======================================
MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
Failed to execute strored procedure: MP_MatchDrivers, hr=0x80040e14 MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
Failed to execute MatchDrivers task, hr=0x80040e14 MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
Response message sent to the client MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
Failed to execute task, hr=0x80040e14 MP_DriverManager 7/25/2012 9:48:01 AM 3740 (0x0E9C)
Any pointer where to look to troubleshoot this issue more?Hi All Did you guyz find a resolution for this ? I am having same error while Installing Power edge R620
Below shows SMSTS.log
Failed to process driver catalog response. Code 0x80004005
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
pDriverCatalog->match( deviceList, m_fpCallbackProc, m_pvCallbackData, matchResultMap ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,854)
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
pDriverInstaller->AutoInstallDrivers( pDriverCatalog, bBestMatch ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,286)
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
Failed to auto provision driver. Code 0x80004005
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
ProcessAutoProvision( pDriverInstaller, bBestMatch ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,415)
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
Failed to auto provision drivers. Code 0x80004005
OSDDriverClient 10/11/2012 12:31:21 PM
1084 (0x043C)
Below is the MP Driver log
CMPDBConnection::ExecuteSQL(): ICommandText::Execute() failed with 0x80040E14
MP_DriverManager 10/11/2012 11:12:59 AM
11228 (0x2BDC)
======================================= MP_DriverManager
10/11/2012 11:12:59 AM 11228 (0x2BDC)
MPDB ERROR - CONNECTION PARAMETERS
SQL Server Name : sqlserver
SQL Database Name : SMS
Integrated Auth : True
MPDB ERROR - EXTENDED INFORMATION
MPDB Method : ExecuteSP()
MPDB Method HRESULT : 0x80040E14
Error Description : Syntax error or access violation
OLEDB IID : {0C733A63-2A1C-11CE-ADE5-00AA0044773D}
ProgID : Microsoft OLE DB Provider for SQL Server
MPDB ERROR - INFORMATION FROM DRIVER
null MP_DriverManager
10/11/2012 11:12:59 AM 11228 (0x2BDC)
=======================================
MP_DriverManager
10/11/2012 11:12:59 AM 11228 (0x2BDC)
Failed to execute strored procedure: MP_MatchDrivers, hr=0x80040e14
MP_DriverManager 10/11/2012 11:12:59 AM
11228 (0x2BDC)
Failed to execute MatchDrivers task, hr=0x80040e14
MP_DriverManager 10/11/2012 11:12:59 AM
11228 (0x2BDC)
Anyone found a resolution for this ?Storage drivver is H710 mini and because of this error,storage driver is not getting installed, and hence OS installation is failing -
Problems with ATI drivers and gnome3?
I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?
I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)
Maybe you are looking for
-
I use my iPad Mini for giving speeches. Is there any way to keep the screen from going to sleep?
I should say, when I pause while someone else talks for a couple of minutes.
-
Performance concern with directory server implementation
performance concern with directory server implementation I first posted this at metalink forum, and was suggested to post it here instead. Hi, I'd like to get any feedback regarding performance of oracle directory server implementation. Below is what
-
What do I use seeing I can not download adobe flashplayer
I am trying to watch a tv rerun I am in Australia and it will not let me watch it on my iPad. I understand I can not download adobe flash player, so what program do I use
-
PGP Decryption Error (File is no valid PGP Message)
Hi, I'm encountering an error while decrypting a pgp file. Error is MP: exception caught with cause com.sap.aii.af.lib.mp.module.ModuleException: File is no valid PGP Message, could not apply decryption. I have tested decrypting the file using an ex
-
How to compare data from 2 different time periods
Hi folks, I have a question on approach to a problem. I want to be able to compare data from a common db, but for 2 different time periods. For example I want to see the number of occurences of an instance in my data for today and compare it against