State Migration Point Problem
Hallo,
I have SCCM 2007 RTM everything is working, but i get this error from Component 'SMS_State_Migration_Point':
SMP Control Manager detected SMP is not responding to HTTP requests. The http status code and text is 500, Internal Server Error.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which SMS is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which SMS is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
Possible cause: The SMS ISAPI Application Identity does not have the requisite logon privileges.
Solution: Verify that the account that the SMS ISAPI is configured to run under has not been denied batch logon rights through group policy.
For more information, refer to Microsoft Knowledge Base.
The IIS is working, for example SMS-Reporting. Where do i configure the ports SMS communicate with IIS?
Thanks
Andreas Scheer
Srikanth,
I am experiencing the same issue as Tom. Here is an excerpt from my smpisapi log:
========== GetExtensionVersion ==========
smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
SMPRequestHandler::Initialization started.
smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
SMS Sitecode = 001 smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
Inserted store "d:\SMP\" to cache smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
Inserted store "D:\SMP\" to cache smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
Initialization of SMP store completed smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
Started SMPStoreMgr worker thread smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
SMPStoreMgr is now initialized smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
Initializing smpPerfObject. smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
smpPerfObject initialization complete. smpisapi 12/12/2007 1:39:58 PM 3232 (0x0CA0)
========== BEGIN: HttpExtensionProc ========== smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Query string to parse: 'op=healthcheck'. smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Creating state store - D:\SMP\SMPSTORED_91DAA93F$\FBC02D2321401636EFBD99756C5AAF338C3D018C06B9724EB56B409163928473. smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Statestore - D:\SMP\SMPSTORED_91DAA93F$\FBC02D2321401636EFBD99756C5AAF338C3D018C06B9724EB56B409163928473 exists. smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
SecureAccess failed with error code (80070005) smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
AddACE to store with access account domain.com\HOST$ failed for directory \\domain.com\SMPSTORED_91DAA93F$\FBC02D2321401636EFBD99756C5AAF338C3D018C06B9724EB56B409163928473. smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Revoke access failed for directory \\domain.com\SMPSTORED_91DAA93F$\FBC02D2321401636EFBD99756C5AAF338C3D018C06B9724EB56B409163928473. smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
StatusRequest::UpdateStatus failed with errorcode (0x80070005) smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
StatusRequest::HandleMessage failed with errorcode (0x80070005) smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Failed to process CAPTURESTATUS request for client GUID:33BB9A27-9705-4553-A4F4-C2A46C17ACFB smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
SMPRequestHandler::HandleMessage for StoreOp CAPTURESTATUS failed with server errorcode 99 smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
HealthCheckRequest::HandleMessage failed with errorcode (0x80040063) smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Failed to process HEALTHCHECK request for client GUID:33BB9A27-9705-4553-A4F4-C2A46C17ACFB smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
SMPRequestHandler::HandleMessage for StoreOp HEALTHCHECK failed with server errorcode 99 smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Returning status "500 Internal Server Error" smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
========== END: HttpExtensionProc ========== smpisapi 12/12/2007 1:44:58 PM 3232 (0x0CA0)
Similar Messages
-
How to manually recover user state data saved to a State Migration Point
Hi,
In SCCM 2012, how would you recover the User State saved to the State Migration Point manually?
In SCCM 2007 you could do what was outlined here:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/159affd3-1726-4829-a0f4-0c875481fc11
However this does not work for SCCM 2012 because the User State Recovery key so long that it cannot be used with a loadstate command (Loadstate commands cannot be longer than 256 characters)
Previously you could also have just opened the User.mig file using Windows Easy Transfer and entered the User State Recovery key stored in SCCM - however in SCCM 2012 this does not work either!
I really need to recover the contents for a user who got a new computer (old one stolen) and requires data from a previous user state capture on the State Migration Point.Hi,
It seems something changed in SCCM 2012.
I've got the same problem and after couple hours of research I found MS article that only helped me -
http://technet.microsoft.com/en-us/library/hh824962.aspx
In SCCM server I run this command:
C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit\User State Migration Tool\amd64>usmtutils.exe /extract C:\tmp\_MIG\USMT.MIG C:\tmp\_MIG\Extract /decrypt /keyfile:C:\tmp\_MIG\Key.txt
and received necessary data. -
State Migration Point Data not Deleting
Hi
I've seen this issue mentioned numerous times on these forums but it looks like a tricky one to get a solution for - would appreciate if somebody could assist
I have SCCM 2012 Deployed with a State Migration Point on another Site Server - I migrate to Windows 7 and the Task Sequnce used include a Capture User State Section and a restore User State Section - The Migration/Task Sequence completes
successfully - have checked reports ....
The Proble is I have set the Stae Migration Point to delete the User State Data to Delete after 3 days ...
it never does this - the Entries remain in the USMT section of SCCM - and if I log onto the Server with the State Migration Role all the data is still there after 3 days.
This is a major problem - is there anyway to force the State Migration Point to delete after 3 days regardless. I know from reading that the issues look to be around the fact that their may be an issue with the "Release Store" Section - however my task sequence
continues -and is marked as successful
SO Basically is there a way to force the Delation of Data automatically through the State Migration Point and if not .... will a manual delation work and if so what folders should I delete (had a nasty issue the other day where I deleted one of these
User State Folders and the State Migration Point went offline, only came back online when I created a blank folder to replace the folder I deleted)
Would really appreciate assistance here as I have come accross this problem on a number of Sites and its not practical to go through log files for each migration to verify that the stores were released correctlyhere is the issue... Thank you Steve Rachui... http://blogs.msdn.com/b/steverac/
I was lucky enough to have him onsite today... for some reason the loadstate is not releasing the client store. if you check the migrationstatus.xml you will see false under restore status. not sure why the store doesn't release yet but it could be timing
between the release and reboot command im not sure.
FYI: - the next morning..
I removed the reboot cycle on my task and when I came in this morning, the xml file showed the datastore was released. (restore status = true) With that said, you will probably need to extend the delay between the release state and the reboot, or remove
the reboot entirely, (which I probably would't personally do.)
good luck guys
So how did you delete the existing folders for the tasks that had already run? Did you manually change the restore status to TRUE? Or is there no way to delete the old data except removing the SMP role, deleting the folders and then re-enabling the SMP role?
Thanks,
SinghP80 -
Restricting State Migration Point to allow 10 GB of data as User State backup
Hi ,
I am using State migration point to backup user data settings through USMT. I am looking for some option either on SMP side or USMT side to restrict data maximum of 10 GB from the system. SMT\USMT should not allow data backup more than 10GB from any system.
Any pointers will be appreciated. Thanks.
Regards,The best you can do is to run scanstate with the estimate parameter to estimate how data it will collect and then branch or abort based on the results.
I outlined how to collect this information beforehand at
http://blog.configmgrftw.com/collecting-usmt-estimates-using-configmgr/
Jason | http://blog.configmgrftw.com | @jasonsandys -
State Migration Point Minimum Free Space
I am in the process of doing OS deployment with Windows 7. I have a State Migration Point in place with minimum free space threshold of 100mb. My question is, will my task sequence error out and fail prior to formatting the drive and installing Windows 7
if the minimum free space is met and all the data cannot be captured? I am nervous that if this threshold is met all user data on a system is not able to be captured and the task sequence continues on to format the drive and install the OS.
Thanks,
Mike
Solutions ArchitectYes, the prepare state capture task will fail if it can't find an SMP with free space on it thus causing the TS as a whole to fail assuming you haven't selected the ignore failure option on the task or any of its parent groups. That's doesn't necessarily
guarantee that there is enough free space or that multiple simultaneous task sequences couldn't cause issues though thus you should plan accordingly, monitor the free space instead of leaving it to chance, and enable the auto cleanup feature with a rational
period of time.
Jason | http://blog.configmgrftw.com -
State Migration Point issues - Error 12030
Hello there,
I wanted to add a state migration point to a host that already operates as a distribution point for several months. The state migration installs successfully when looking at the msi-log, but is not operational afterwards. The log file states that the health
check fails with error 12030. Did I forget something?
This is the content of the smpmgr.log
SMS_EXECUTIVE started SMS_STATE_MIGRATION_POINT as thread ID 3376 (0xD30). $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3636 (0xE34)>
******************************************************************************** $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
SMS_STATE_MIGRATION_POINT received START notification. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
SMPPeriodicActivityInterval = 1440 minutes. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
SMPEncryptionCert Length 3008. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
RegOpenKeyEx succeeded for regkeypath SOFTWARE\MICROSOFT\SMS\SMP\STATESTORE $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
StateMsgDir = C:\SMS\MP\outboxes\statemsg.box, StatusmsgDir = C:\SMS\MP\outboxes\stat.box, sitecode = PH2 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.256-60><thread=3376 (0xD30)>
Securing SMP msg dirs successful $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
HandleSMPRegistryChanges: RegQueryInfoKey succeeded. Number of SMP stores=1 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
RegOpenKeyEx succeeded for regkeypath SOFTWARE\MICROSOFT\SMS\SMP\STATESTORE\SMPSTOREE_EAFE6917 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
Directory E:\StateMigration\SMPSTOREE_EAFE6917$ exists. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
Creating share SMPSTOREE_EAFE6917$ succeeded $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
AllowSMPIsapiAccess succeeded for share E:\StateMigration\SMPSTOREE_EAFE6917$. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
SMPPeriodicActivityInterval = 1440 minutes $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
Handling SMP registry Changes succeeded. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.287-60><thread=3376 (0xD30)>
Successfully created factory CSMPMgrFactory $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.303-60><thread=3376 (0xD30)>
Successfully registered class CSMPMgr. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.303-60><thread=3376 (0xD30)>
SMS_STATE_MIGRATION_POINT successfully started $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.303-60><thread=3376 (0xD30)>
Configuration and Availability Monitor thread started. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.303-60><thread=1196 (0x4AC)>
Initialized 'SMS Server Availability' performance instance => SMS State Migration Point.~ $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:28:50.303-60><thread=1196 (0x4AC)>
HandleSMPRegistryChanges: RegQueryInfoKey succeeded. Number of SMP stores=1 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.190-60><thread=1196 (0x4AC)>
RegOpenKeyEx succeeded for regkeypath SOFTWARE\MICROSOFT\SMS\SMP\STATESTORE\SMPSTOREE_EAFE6917 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.190-60><thread=1196 (0x4AC)>
Directory E:\StateMigration\SMPSTOREE_EAFE6917$ exists. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.190-60><thread=1196 (0x4AC)>
Creating share SMPSTOREE_EAFE6917$ succeeded $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.206-60><thread=1196 (0x4AC)>
AllowSMPIsapiAccess succeeded for share E:\StateMigration\SMPSTOREE_EAFE6917$. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.206-60><thread=1196 (0x4AC)>
SMPPeriodicActivityInterval = 1440 minutes $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.206-60><thread=1196 (0x4AC)>
Handling SMP registry Changes succeeded. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:14.206-60><thread=1196 (0x4AC)>
SSL is enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Client authentication is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
CRL Checking is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Machine name is 'statemigr.something.com'. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Certificate has "SSL Client Authentication" capability. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Certificate doesn't have "SSL Client Authentication" capabilities. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Skipping this certificate which is not valid for ConfigMgr usage. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
>>> Selected Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' for HTTPS Client Authentication $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.298-60><thread=1196 (0x4AC)>
Failed to send http request /SMSSMP/.sms_smp?op=healthcheck. Error 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
Call to HttpSendRequestSync failed for port 443 with 12030 error code. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
Health check operation failed, error code is 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
STATMSG: ID=6208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=statemigr.something.com SITE=PH2 PID=2904 TID=1196 GMTDATE=Di Mrz 24 19:29:20.314 2015 ISTR0="12030" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
Completed availability check on local machine $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
Initialization still in progress. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:20.314-60><thread=1196 (0x4AC)>
SSL is enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Client authentication is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
CRL Checking is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Machine name is 'statemigr.something.com'. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Certificate has "SSL Client Authentication" capability. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Certificate doesn't have "SSL Client Authentication" capabilities. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Skipping this certificate which is not valid for ConfigMgr usage. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
>>> Selected Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' for HTTPS Client Authentication $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Failed to send http request /SMSSMP/.sms_smp?op=healthcheck. Error 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Call to HttpSendRequestSync failed for port 443 with 12030 error code. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Health check operation failed, error code is 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Completed availability check on local machine $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
Initialization still in progress. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:29:50.294-60><thread=1196 (0x4AC)>
SSL is enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Client authentication is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
CRL Checking is also enabled. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Machine name is 'statemigr.something.com'. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Certificate has "SSL Client Authentication" capability. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Begin validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Certificate doesn't have "SSL Client Authentication" capabilities. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Completed validation of Certificate [Thumbprint 35633602ebcd8512702330af54bf349adb3b9b0a] issued to 'statemigr.something.com' $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Skipping this certificate which is not valid for ConfigMgr usage. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
>>> Selected Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' for HTTPS Client Authentication $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Failed to send http request /SMSSMP/.sms_smp?op=healthcheck. Error 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Call to HttpSendRequestSync failed for port 443 with 12030 error code. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Health check operation failed, error code is 12030 $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.289-60><thread=1196 (0x4AC)>
Completed availability check on local machine $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.305-60><thread=1196 (0x4AC)>
Initialization still in progress. $$<SMS_STATE_MIGRATION_POINT><03-24-2015 20:30:20.305-60><thread=1196 (0x4AC)>The server has two certificates, one with client auth and one with server auth capabilities. As you can see in the log, the certificate with the server auth capability is ignored and the client auth is succesfully selected:
>>> Selected Certificate [Thumbprint b1b24deaaa109fa76f892a1ded986dca246d4f60] issued to 'statemigr.something.com' for HTTPS Client Authentication $$<SMS_STATE_MIGRATION_POINT>
This client certificate has been (and still is) working for client authentication of the distribution point on the same server for months. -
State Migration Point Status Shows Critical
Our environment is a single primary site with one primary server (MP, FSP, DP, SMP, etc.) and four remote servers that function as DPs and SMPs. The primary site server is reporting in the Site Status window that it is in a Critical status, except
that everywhere else shows nothing is wrong. It has been this way for several weeks. Under Component Status, every component reports OK. All of the smpmgr.log files show no errors and show the typical health check success messages. I
can't find any reason that this role is reporting Critical in the Site Status window, and resetting counts isn't helping. Has anyone run into this before or do you have any ideas how to resolve this short of un-installing and re-installing the role.Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Collecting USMT data to State Migration point without imaging.
Hey can anyone help out with this. We are trying to capture user data from one workstation to another using the SCCM and USMT. It works great...for in place migration, but here is the scenerio:
user Bob, gets a new workstation, he wants to back all of the data up from the old workstation to the new workstation. From what I can see as of right now, the only way to do that is to reimage it with USMT, and then associate the computer within
SMP in the console to the new workstation.
Is there a way I can just boot the OS into PE capture the data to the SMP and go from there?
Hope that made sense.
ThanksYou've just described a side-by-side migration and your assumption is almost correct.
This is the process:
1. Create computer association between old & new
2. Create TS with USMT capture to SMP (custom task sequence with USMT only)- deploy to old (you don't have to re-image the old computer - just capture the data)
3. Create TS with OSD and UMST restore - deploy to new
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
User State Migration using SMP with config manager 2012 R2
Hi ,
I have SMP at primary site and need to migrate XP and 7 machines using this SMP (using USMT),
what are the steps do i need to define in TS so that usmt can use State migration point for user setting\data backup?
Another challenge i see it with XP since we are deciding to take 2 phase approach, that means we will backup data using 1 TS (3 step TS) and then restore data as part of another TS that will install windows 8.1 also with user state restore.
Any pointers if we need to define anything special in TS (migration store etc.) or since its SMP, TS should able to take care of finding it automatically and backup\restore user state?
We have MDT based TS, just wondering if we need to define anything inside CS.ini file related to SMP?
Any pointers will be appreciated. Thanks
Regards,Hi,
Please refer to the link below:
How to migrate user data from Windows XP to Windows 8.1 with System Center 2012 R2 Configuration Manager
http://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Dynamic computers collection based on User State Migration associations
At our company, we have a group of computers with the follwoing situation:
User works on machine with WindowsXP, there is already prepared new machine, with Windows 7 installed, and delivered to user. I have prepared 2 task sequences - "State Capture" and "State Restore", both deployed to separate device collections.
Now, what I do is create old/new computer association in the User State Migration tab, add old computer to Capture collection, let the TS complete, add new computer to Restore collection, and let the TS complete. After all these steps user can begin to work
on the new machine with his/her profile and data migrated.
But I would like to speed things a little bit, and allow my
colleagues to perform such "migration" by simply adding computers association. To achieve that, I need to create a query, that would assign computers to collections, based on the existing associations in the User State Migration tab. The problem is,
I fail to find appropriate rule in query wizard. Is it possible at all?
I need computer to be added to Capture collection upon detection of it being source computer in the USM tab, and removed from collection upon finished TS, with the target computer added to Restore collection at the same moment and removed from the collection
upon finished restore TS.
I would greatly appreciate any help or pointing into right direction.Hi,
There is a blog about removing computer from collection after SCCM task sequence. But it is for SCCM 2007. You could have a look on this blog to see if the script can be edited to meet your requirements.
Remove computer association from collection
after SCCM task sequence
Note: Microsoft provides third-party contact information to help you find technical support. This
contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it. -
Migration point base to Oracle
can any one suggest steps to migrate point base to oracle database.
This is a DB forum question.
Neverthless, a intelligent Gentleman has written a utility for this.
http://linux-bsd-central.com/index.php/content/view/243/
Thanks
Vishnu -
Migration Assistant problem: Lion to Lion does not work
Background:I have a 2 year old 15" MBP. I just purchased and tonight am setting up a brand new 27" iMac 2.7Ghz i5.
I upgraded from Snow Leopard to Lion the day it was released on the MBP. A day later, I purchased the iMac which still had Snow Leopard so I used the "up to date" program to get a free version of Lion. I did a clean install of Lion on the iMac since it was brand new.
Problem: I connected the MBP and iMac via Ethernet cables connected to my Airport Extreme. Migration Assistant worked on the initial steps, finding the MBP and matching the authentication codes. After that, I get to the screen where the iMac is looking for files on the MBP and calculating the size of folders to move. On this screen (on the iMac side), an error box pops on and off many times for about a minute then stays there with the following: "Your other Mac stopped responding. Make sure that all of your network devices are connected and turned on. If you cancel the transfer, use Migration Assistant to complete the transfer later. Looking for your Mac..." It only gives me the button to "Cancel Transfer"
My connections were fine. I was able to connect until this point. This issue happens whether the connection is Ethernet network via Airport Extreme, both connected via Wifi from the Airport Extreme, or connected directly via Firewire 800. I've tried everything I can think of. No solution and have not found this issue here or on any other forum. Any ideas? I really want to use the Migration Assistant route with this. I've use it before on previous Mac's with no issues.I just talked to the Apple support and they suggested to try the migration using Time Machine. That's was also my idea this morning so I'm trying to do this now.
For the Apple support I add the repeating part from the console here:
25.07.11 23:44:01,106 MigrateTool: (SRV) ! (26) `o:incompatibleAppsInfoForPaths p:/Library/Screen Savers/3D Weather Globe Deluxe Edition.saver... [92] o:(null)... [0]'
25.07.11 23:44:01,106 MigrateTool: (PA!): failed to serialize result: (null)
25.07.11 23:44:01,107 MigrateTool: (SRV) -> served 0.000004 MB... 0.001252s @0.003047MB/s
25.07.11 23:44:01,709 MigrateTool: (SRV) -> Reset Server Control...
25.07.11 23:44:01,710 MigrateTool: (SRV) ! (27) `o:sizeForAbsolutePath p:/Users/andreas/Desktop... [1] o:(null)... [0]'
25.07.11 23:44:01,773 MigrateTool: (SRV) -> served 0.000230 MB... 0.062471s @0.003679MB/s -
Migration Assistant Problem in Mountain Lion
I just purchased a Mac Mini Server (i7 quad core with 16GB memory and 2 750GB drives). The machine seems to work well and is quite fast. My problem is when I try to migrate everything off of my Macbook Air 13" using Migration Assistant. With both computers (Mac OS X 10.8) connected to the same LAN segment (either wired or by 802.11n) and apparently talking on the LAN properly (no packet loss on pinging the host router), I follow the on-screen propmts for MA and the source computer is found. When I start the migration though, I consistently get a dialogue on the "to" machine (Mac Mini) that states that the MacBook has "stopped responding" and the whole process hangs up. Exiting the MA apps on both sides reveals that each machine appears to work normally on the network with no indication of LAN communication issues. Has anyone seen this behaviour or have any practical solutions to suggest?
JohnUse Disk Utility on both to Verify the Drives, what does it report?
-
I just started my new iMac and used the migration feature. I have techtool 4.1.1 on my old machine. When the migration finished it started with Techtool splash screen and " ? " marks in the dock for everything but the finder and trash. I tried to throw TT away but it wouldn't let me so I restarted in terminal mode and removed all files containing " techtool". I restarted iMac (after removing Firewire) and same thing -- techtool screen. I read threads and checked those things and places with no luck. I logged out and logged in under another admin account and there was no problem, looked perfect. I rechecked user libraries-- nothing. Any ideas??
Also my Adobe, Filemaker, Quickbooks, etc -- applications didn't transfer but the Application support files did.I fixed it myself -- do I get points? Apparently Paralels was not ready for the update. Once they did an update it was fine
Maybe you are looking for
-
Does anyone know how to get a matrix style title effect and whether it can be done in Livetype or Motion, or is there a good plug-in for it?
-
I have generated a CSR for WS and have received a CERT and that works fine... all installs well. However, I would like to be able to clean slate re-install the WS and reload the CERT (why - because we have a script that rebuilds an RP in minutes auto
-
Just tried to install the driver "Creative Sound Blaster X-Fi series driver 2.8.005" on my XtremeMusic and it said operating system not recognized. Is there going to be an updated version of the driver that support Windows 7 SP? Does anyone know of a
-
what's the best way to change a gray/dirty white sky to blue?
-
I installed Pro tools 8 M- Powered, the ilook and interface are plugged in, but for some reason when I go to create a new session, it doesn't happen. Pro Tools is still open, but I cannot access any sessions.