Statistical set up of orders ( oli7bw)

HI Gurus,
Just a small doubt,
I am going to do OLI7BW for SD Orders. This statistical setup is going to take 8 to 10 hours of time.
Now can you please suggest
1) when to run this setup? DUring weekends or nights where user activity will not be there...
2) Whether to run it in foreground or background ( i have two options execute & execute in background which one to select ? )
3) what is the significance of ' New Run' , ' Block all orders?' & ' Simulation extr. str. BW'
Thanks in advance
regards
Janardhan KUmar K

1) when to run this setup? DUring weekends or nights where user activity will not be there...
The best time to run the setup is when there's little or no activity on the source system.
2) Whether to run it in foreground or background ( i have two options execute & execute in background which one to select ? )
It should be run in background. If you run in foreground, you'll lock up your SAPGUI and risk timing out. Execute in Background is the best selection.
3) what is the significance of ' New Run' , ' Block all orders?' & ' Simulation extr. str. BW'
'New Run' should be checked if this is a new execution of the setup.
'Block all orders?', when checked, will lock all documents in the source system from being updated during the setup (not advisable if the setup is running during times where the source tables can be updated).
'Simulation extr. str. BW' runs the setup as a simulation, whereby the setup tables aren't updated. This will help you figure out if there are any issues with the data prior to the actual execution of the setup job.
If I may make a suggestion...you may want to get the range of Sales Documents by year/month and execute multiple, concurrent setup jobs. You could probably run 4 concurrent jobs with Sales Document ranges of 6 months per job. This will significantly increase your throughput in extracting the data into the setup table.

Similar Messages

  • Statistical set up table / V3

    Hi,
    --I just completed a review and a test on IDES (in R3) on the topic “statistical set up process for the logistics customizing cockpit”
    1. The document kept referring to “V3 scheduled” job and “V3” update: Can you bring this “V3” in simple terms for me? Was I supposed to see something called V3? What really is V3 update?
    2. There was a discussion about running OLI17BW transaction to set up the “statistical table for the logistics application number”.  I followed the discussion but what actually is this “statistical table” and what is it for?
    3. In this same discussion, it stated that “you can no longer use the statistical data already contained in setup table and you have to delete it via LBWG” Can you touch on this quote to help me get the logic behind it? What is this setup table and how do I view its content?
    Thanks

    Hi Amanda,
    The V3 update is the method used to load your QRFC queue.  This method is identified in transaction LBWE and you can change your method there.  In your case, you need to select the option next to Application 11: SD Sales BW.  Without getting to involved, "Queued Delta" is probably chosen most often.
    In OLI7BW, your are filling in the setup tables for Initializing SD data transfers.  If you want to load a year's worth of data, then you load that year's data into the setup table using OLI7BW.  Then you can go to BW and run a full load or initialization for that data.  If, for example, you wanted 2006 sales data, you would identify you SD number ranges that were created in 2006, select those sales documents in OLI7BW and execute the transaction in the background for large amounts of data (or foreground for smaller datasets).  After successful completion, you can go into BW and run you infopackage wide open and you will get your 2006 data.  If you loaded 2005 and 2006 into the setup tables, running the IP wide open would give you both years.
    LBWG deletes the data in the setup tables.  If you load 2006 data in the table, and then load the data a second time, then you will have duplicate data.  You will need to run LBWG to wipe the data and start over.
    Thanks,
    Brian

  • New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

    Hi there,
    We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
    It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
    To see this :
    1. Create a bullet point list with 4 lines
    2. Set build to Appear
    3. Set "Set Timing and Order of each Build" to on
    4. Create a Smart Build - set to flip
    5. On the Smart Build Set "Set Timing and Order of each Build" to on
    5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
    At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
    With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
    Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
    Thanks

    Hi glennelliott72,
    I've noticed the bug you describe and to me it's very irritating.
    I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
    What is your experience about?
    I currently use OX Lion.
    Thank you

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Unable to set the tab order in a form I am creating

    Hello,
    I have a form that I created a bunch of fields for. I did make some of the fields out of order, but was not concerned as I figured I would set the tab order as I have in the past.
    However, for this set of fields, not mater what I do, and how many times I try to set the tab order manually, it skips over a bunch of fields. Even if I try to let acrobat automatically set the tab order, it still doesn't work.
    These fields have been made from scratch as well as, copy and pasted to make sure their properties were all the same, other than a unique name. I can't figure this one out.
    Has anyone ever had this happen to them before?
    thanks!!
    babs

    Hi everyone...thanks!!
    I did check the read only issue first, and that wasn't it... and I made sure they were just text fields and never started out as radio buttons...
    At one poin,t a bad param error popped up..... ah ha!!
    So, I exported the file back to postscript (deleting all the fields first)
    and then made new ones and it worked fine...
    Must have been a corrupted file ;-)
    Thanks for the help!!!!
    babs

  • How can I save the order of photos in albums? Even though I have set as album order they revert back

    How can I save the order of photos in albums in Elements 11? Even though I have set as album order they revert back to original order.

    Could you confirm that when you re-open the sorted album, the display order on the top bar just over the browsing space is still in 'album' order ? That order may have been changed to a date order. For me, I get the order of the last album I opened, not necessarily the 'album' order of the present album.

  • Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

    Hi,
    We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
    Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
    Would be great if anyone could guide in this regard
    Detailed Scenario:
    1) Maintenance Order is created (IW31) is created in plant A
    2) For non-stock items, reservation created by maintenance order creates a purchase requisition
    3) Account Assigned STO (against maintenance order) is created from purchase requisition
    4) Transfer Posting done from Plant B (351 movement) for complete qty
    5) GR at Plant A done (101 movement) for complete qty.
    6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
    Thanks
    Edited by: muthukumarv on Apr 2, 2010 8:59 PM
    Edited by: muthukumarv on Apr 2, 2010 9:00 PM
    Edited by: muthukumarv on Apr 2, 2010 9:03 PM

    Hi,
    Please check in the STO if the "Delivery completed" indicator is checked or not?
    If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
    If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
    Thanx.
    Nilmoni.

  • How to set default sorting order in ADF Table

    Hi,
    I want to set the default sorting order as ascending in adf table. Please help me regarding how can we do it.
    Using JDev 11.1.1.5.0

    Hi Frank,
    Thanks for the quick reply.
    I have done binding of table with list of pojos.
    The Class for which Data control is created is as:-
    public class DemoDC {
        private List<TableEntity> tableList =
            new ArrayList<TableEntity>();
        public List<TableEntity> getTableList() {
            return tableList;
        public void setTableList(List<TableEntity> tableList) {
            this.tableList = tableList;
    where TableEntity is a pojo which has all the columns as its attributes.
    Now when i do the above steps , after clicking on pencil icon and seecting the iterator name in the iterator tab (DemoDC-> tableList) , and selcting the 'sort criteria' tab when i select a column and try to set the sort order  I get error as ' Iterator can not be created for the selected node ' .

  • How to get and set the column order in SharePoint list forms

    Hi,
    I want to read the column order of the SharePoint list forms in SharePoint 2003 sites using any of the available web services and need to set the same order
    in the newly created list in SharePoint 2010.
    I am able to read the fields from SharePoint 2003 and creating the list with same fields in SharePoint 2010, but the column order is not maintaining in
    list forms.
    Also, I need to created the views from 2003 site to 2010 site.
    Please help me...
    Thanks in advance...

    Hi,
    Please try to use the following code to programatically change the order.
    SPList list = web.Lists["Example List"];
    if (list.ContentTypes.Count > 0)
    SPContentType ct = list.ContentTypes[0];
    string[] names = {"Example_x0020_One", "Example_x0020_Two", "Example_x0020_Three"};
    ct.FieldLinks.Reorder(names);
    ct.Update();
    Here is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/en-US/ce66fd65-2882-4bda-8142-89e116d8b90f/how-to-set-the-order-of-the-fields-in-list-forms?forum=sharepointdevelopmentprevious
    Best Regards
    Dennis Guo
    TechNet Community Support

  • System downtime during Statistical Set-up (OLI3BW)

    Hi Gurus,
    Please help me with this.
    Is there a way we can minimise R/3 downtime while doing Statistical set-up for loading data into BW.
    We have Purchasing cube active with us and we are enhancing the cube and the extractor to add new fields, since the requirements needs history for this new fields, we have to reinitliase the LO set-up again, we are also upgrading from unserialised V3 to Queued Delta update. However historically it looks like we need a downtime which means no transactions should happen while performing OLI3BW. I was wondering is there a way we can perform this with no downtime. Our client is little apprehensive for a long downtime. Please share your thoughts..
    Thanks All.

    hi,
    try check SAP Note Number: 753654
    and there is 'how to' minimize downtime
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6

  • Is it possible to set the tab order of components on a form?

    I'm trying to set the tab order of text boxes on a form, that uses GridBag layout. It seems that the tab order is automatically set according to the order that components are added to the form in. Is there a way to change it manually? I really don't want to redo the entire form...

    I have no idea what you're talking about. It might be worth to look for the right forum which suits your actual problem. Are you talking about Swing? Then post it in the Swing forum. Are you talking about JSP? Then post it in the JSP forum.
    Go to the forum index to see what forums are all available: http://forum.java.sun.com/index.jspa?tab=java

  • Need to set the tab order in HTMLB controls

    I readed in another thread that it was not possible to set the tab order in HTMLB controls on BSP forms.
    However it was possible to do a little workaround, by setting the tooltip property, and put in the tabindex in that. Because Browsers do understand the property tabindex.
    Examble:
    <htmlb:inputField id="authorfname1"
    tooltip='tooltip1" tabindex="2'
    value = "<%= authorfname %>" />
    HTML Output would be like this:
    <input title="tooltip1" tabindex="2" class="sapEdfTxtEnbl"
    size="20" name="authorfname1" id="authorfname1" value="">
    <b>It works a little bit differently in my HTMLB controls.</b> Output is like this:
    <input title="tooltip1&quot; tabindex=&quot;2" class="sapEdfTxtEnbl"
    size="20" name="authorfname1" id="authorfname1" value="">
    <i>It doesn't work. " becomes &quot; <b>How do I solve this?</b></i>

    thanks for sharing the info.
    to handle your issue you could do the following
    <% data: replace_string type string .
    clear replace_string .
    replace_string = `<input  tabindex="2"`.
                  %>
                  <bsp:findAndReplace find    = "<input"
                                      replace = "<%= replace_string                  %>" >
                   <htmlb:inputField id="authorfname1"
    tooltip="tooltip1"
    value = "<%= authorfname %>" />
                  </bsp:findAndReplace>
    Hope this helps.
    Regards
    Raja

  • Quick Tip: How do I set up tab order in a form? | Acrobat X Tips & Tricks | Adobe TV

    Learn how to set the tab order in a PDF form using Acrobat X Std. or Pro. to improve the appearance of your PDF form and also make it easier for users to use.
    http://adobe.ly/zMIMWJ

    Well, most users want custom tab orders. To do that...
    Go to Menu Forms --> Add or Edit Fields...
    If necessary, make sure the left-side bar opens up to the form fields listing.
    There's a dropdown menu at the top of this sidebar that says "Tab Order"
    Click it and select "Order Tabs Manually"
    Then drag and drop the tabs sequentially in the list in the sidebar. When you close Form Editing & test, you should be able to tab through in your new order.
    HTH

  • How can I set the tab order in a form?

    How can I set the tab order in a form?

    Sorry. I don't mean page tabs, but the order in which form fields are selected by the tab key. In simple html there is a value called tabindex and I was just wondering if there is a way to assign this order within a portal form. I have basically recreated the form with a custom layout and adjusted the table structure to force the order I was looking for, but it would be a nice add for future versions.

  • Anyway to set the TAB order in a form?

    Hi all,
    Is there anyway to set the TAB order in a form where it can skip from tabbiong to the labels... and also when to form regions are side by side to direct the tabbing to go down the first form then up to the top of the second and down the second...???
    Some languages allow to assign tab order... 10,20,30,40..etc.
    Thank you, Bill

    Hi Andy!
    I just started to set the tabindex on each item... it wasn't working.. I copied the example you gave.. ha.. you had taxindex --- TAX and I too didn't notice it.. so just want to mention it incase anyone does what I did.. copies without thinking..
    As you said in the previous post it is TABINDEX="n"
    Ha.. its a Monday.. Bill

Maybe you are looking for