Status need to be change form PCNF to CNF

Hi PP Gurus,
In my project, we have orderwise confirmation. When the users do confirmation in CO15, they do it partially irrespective of the confirmed qty it may be equal or short. say for qty 10, they do partial confirmation for qty 10. Now when the order gets status change as TECO, then also system allow to do confirmation for the same oder of qty 10, as this is the natural behaviour of system to do posting against partial confirmations.
So my requirement is , whether we can do status change in the order with TECO from PCNF to CNF?
What procedure we need to follow? As per my understanding, the status of the order for posting, say PCN,CNF & DLV cannot be change in the order itself. Some posting related transaction must be happen on the order.
Regards,
Sandeep

Dear ,
What setupo did you keep for Stauts Id -I0045 in BS22 for TECO and business transtion ?? Please check it if system is allowing the CNF even you set TECO in CO02 for production order .
Here in BS22 , for TECO sttus , you have to mark Forbidden in Business Tans which allow you to post confirmation .
Select the Business Transaction RMRU (Confirm order) - It will be in Allowed status and make it Forbidden
Refer our earlier thread: posting date in CO11N
Regards
JH
Edited by: Jiaul Haque on Dec 9, 2010 7:49 AM

Similar Messages

W2 report hs been run!!! Filing status needs to be changed

Hi Team,
The W2 report has been run for a set of employees and the filing date has been set.Unable to run for the rest of the employees.
Please suggest how can we delete the records of w2 forms for the employees run as the issue is that the filing date has been set.
Please reply asap.
Thanks in advance
Regards,
Sridevi

Oh Jolly! The day has come to find out whether we will be screwed by BestBuy Mobile with a $600 fee for their mistake. I do not expect any fair resolution (which would be not charge the fee since no "dealer code" was changed and no breach in the purchase agreement occurred) from them to be honest. They haven't given me a reason to believe so.
I am betting I will get no answer today, and when I contact the outsourced support tonight after 48 hours have passed, they will tell me to wait another 48 hours "for my matter to be resolved". I'm sure if I send the phones back tomorrow I they would get there before I get any type of response from this "Activations team" .
Any takers?

Change form CNF to PCNF status

Dear all,
I have one production order with 2 operations.
In the setup I have that the final confirmation will be set automatically, means that when the sum of yeld and scrap quantity reach the total of the operation the final confirmation is set.
Now I have one issue, after I have my last opration with status CNF and my order with status CNF, If I canc el a confirmation of the last operation, but not the confirmation that is flaged as final confirmation, the quantity is reduced, but the status is not changed from CNF to PCNF.
If I can cel the confirmation that is flaged as final confirmation the quantity is reduced and also the status change from CNF to PCNF.
Anyone have one idea how I can have the status also reverted from CNF to PCNF id any of the confirmation is canceled?
Thanks in advance for your help
Best Regards
Manuel Antonio

Dear,
You can change the status from PCNF to CNF but can not change the status from CNF to PCNF.
Please try with CO13 cancle the confirmation and then do confirmation
If you confirm the First Operation with Final Confirm then the operation Status would be CNF and also the Order Status will also be CNF.
So, proceed with other operation confirmations or again partially confirm the first operation with 0 quantity, then the order Status will be PCNF.
Please refer this thread also,
status change from CNF to PCNF urgent
Regards,
R.Brahmankar

Infotype screen headers needs to be changed for all the infotypes

Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
Aastha

Hi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK

How to bring status icons in the Adobe Form.

Hi Experts,
I am new to Adobe forms and I need to bring a icon indicating the satus ( For example green icon shoud be displayed if the values exceed our expection ) . Currently if I try to bring an icon in the form it is just displaying the text value corresponding to the icon even though the icon is of data type ICONTEXT (For Example:Instead of displaying a icon in green it just displaying the corresponding text values like '@@4' ) . When we try to display the same icon in the table view it is displayed in a form of image.
Kindly let me know how to bring status icon in the adobe forms.
Thanks in Advance.
Regards,
Nandha

Hi,
The ADS will not understand this as an icon and create it on the PDF. If you want to insert an icon in the
PDF you should insert it as an image in the Designer.
Arun

Need equivalent of Oracle Forms Row-Level LOV

I came very close, but I am stuck on the last item.
I am trying to build an update form. I have a select box at the top, and when I select a new value, I want it to change all of the values on the form (for update) to the record associted with the value I chose in the Select Box.
I did this with the Master Detail wizard, although I believe that a "Form with a Report ", would work too. With the Master Detail Wizard, I choose "Edit detail on separate page", which creates the page that I am after, then I just delete the others. I then go to the last page (i.e., edit detail), and change the non-displayed primary key to a "Select List with Redirect" and then associate the desired LOV.
It works pretty nicely one I select a value, and it performs the redirect. However; I can't seem to get the form to pre-populate upon startup.
I tried defaulting the Select List, it does not pull in the detail data, unless I select something with the selct box.

Just three last questions.
1) If I want to call another similar form and have it start on the same item that I currently have selected in the select box, how would I pass that parameter, and how would I receive that parameter? I currently create a link on the first page, and use the following to call the second page:
LinkName
2) Is there an easier way to do what I am trying to do other than using a Master Detail Wizard, or Form with a Report. When I use the wizrd to create a single form, it seems to default to an Insert Form, and is missing the necessary function to do what I like.
3) In my first two forms, a record will always exist before I navigate to it. However; I have another class of form, that may not have a record yet. Do I need to create this form differently, or will the approach I've taken above still work if I need the form to do an insert rather than an update into the associated detail table?

Hiding Status column in MSS Status Overview for Personnel Change Requests

Hi,
We have MSS implemented in SAP Portal.
We are using Status Overview for Personnel Change Requests iview for which we have multiple columns displayed with data.
We need to hide Status column in Status Overview for Personnel Change Requests iview for all the users.
Can any body please let me know how it can be done.
Regards,
Pradeep B
Edited by: pradeep balam on May 17, 2011 4:01 PM

Hi Pradeep,
Preview the portal page which you want to edit, in this case status overview in PCR. In the preview press the CTRL-key and right-click on the column that you want to edit. Here, you will be able to perform your customizations like hiding columns, labels etc
Hope it helps,
Prathamesh

Change Form Name

Dear All,
Is it possible to change the form name in any module of SAP B One. I want to change form name of A/R down payment request is it possible to do this in main menu of module. If yes please let me know the procedure.
Thanks
swapnil

Hi SWAPNIL,
Rahul is partially correct. You can change Purchase documents' name/form title from the document numbering form (AdministrationSystem IniticalizationDocument Numbering).
For Sales documents yes, you really need to use the UI API.
Regards,
Vítor Vieira

SCSM 2012 Change form issue - Scheduled start and end times default to 12:00:00

I have a report that the Change Form in SCSM 2012 is not allowing users to set the scheduled start and end times. The date stays correct, but the time reverts back to 12:00:00, and the user has to save to the initial form, then re-open and
change the times.
I checked in the authoring tool, the time/date field is set to full date and time. (I think these are custom fields)
I am not sure where else to look to adjust any settings as needed.
Thanks for any assistance.
Joshua Fuente

Hi Joshua,
Is this situation on all consoles or few ones? Check the time format on the user's PC. 24h or 12h could affect the DateTime control's behavior.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

Change form layout by User's Manager

Hi all,
1. I need change forms of provisioning e management for User's Manager/Administrator of Resource view only resources management by him.
Eg.
If Admin1 access User1 profile and go to resource profile, I need show only resources that he is Administrator.
2. Are the some way to filter the resource profile by User's Manager/Administrator of Resource?
Eg.
In the User1 profile, Admin1 view information A/B/C (roles of resource) on the attribute profile(combobox/lookup) and Admin2 view only information B/C/D.
Thanks in advance,
Carlos

Sorry, i have no idea. I would suggest you create an SR in metalink.oracle.com if you have purchased oracle support to find out what the variable is for.
-Kevin

Material Ledger Status for exisitng materials change

Hi,
What is the best way to perform material ledger closing entries for pre-existing materials in plant?
I have a plant that already has pre-exisiting materials since 01/2009 or prior, and then we activated material ledger for this plant.
Of course, we then try to run actual costing CKMLCP for these existing materials for period 05/2010, and is errored with
"carry-out period-end closing for materials in previous period" message. I try OSS note 361236 to close out periods that are older than previous period..with the MMPV period shift situation; but is not helping because these materials are already existing, so I can have CKM3 analysis for these materials as far back as 01/2006...as I ran report S_ALR_87013180 to check the period status for all these materials to see how far do i have to go back in terms of period/fiscal yr.
My question is, if there are pre-existing materials active in the plant and then we activated ML, how far do I have to go back to get the CKMLCP done? Or what is the best way to handle such scenarios?
any advice?

Hey,
Can you let me know when did you do the ML startup?
At production start, the system automatically sets all materials to price determination control 2, which will not be included in ckmlcp processing.
And when you change the price determination from 2 to 3 via CKMM, the period status will be automatically changed to "new object", for which there's no need to do the period end closing.
Anyway, if your materials is with status 30 for the previous periods, the most convenient solution is to manually set it to 70 for the last period. You may achieve this via program MLHELP_SET_PP_STATUS_70. You only need to do it for the period before last period. Then you can go ahead with the normal period end closing process for the previous period.
Best Regards
Young

Need to build a form based on a table in a different schema

Hello all,
I am still new to APEX. I have been playing with it for a few days.
I have an APEX user 'demo' whose default schema is demo1.
But I need to create a form that can insert,update and delete based on table 'employee' in schema demo2.
Demo has all the rights on employee table in demo2. I also assigned the demo2 schema to demo user's workspace.
But when I am building the form, demo1 is th eparsing schema, but in table/view owner only demo1 is available. I don't see demo2 even though I assigned it to demo user's workspace.
Is it possible to build a form based on a table in a different schema? I tried creating a synonym, but it doesn't show up in the list of tables to select from.
I don't want to create views or anything because there are many tables in different schemas and it's not possible to go on creating views or such for each one.
I was able to access th etable in a report though by prefixing the table name with the schema name.
I would appreciate if someone could point me in the right direction.
Thanks!

Varad,
Thank you for the explanation. So from what I understand, every time I create a form or report based on a table in a different schema, just change the parsing schema in application definition to the new one and create the form or report. So this way my forms and reports or whatever can be based on different tables in different schemas and they would run fine when deployed in a runtime environment (provided the appropriate privileges are there on the objects in context)?
I tried this and I was able to see the different schema and select the table and create the form. I haven't tested in runtime though.
Seems like a feasible option, need to test all scenarios though. If this is a feasible solution then there is no need to create synonyms or views (I am not talking about others' scenarios such as security etc) etc. Just appropriate privileges will do it.
Thanks Varad. Have you used this way of creating a form in your apps? I need to explore more to see if it breaks anything.
So, every time I need to select an object, say a table, in a different schema I need to temporarily change the parsing schema to that schema in the application definition? Is that a correct statement?
I will leave the thread open to see if anybody has any comments.

JDAPI change form reference within menus

Hello selfless helpers of Oracle,
We are trying to migrate our web forms from a windows 2003 server to a linux server.
I posted a similar issue sometime back , but that was with regards to getting the JDAPI to start working. The JDAPI has started working , i was able to successfully convert the form-references to lowercase from uppercase within a form , using the sample code ChangeCase from "Note 403582.1 Sample Code JDAPI: switch Case For FormName in OPEN_FORM /CALL_FORM /NEW_FORM " .
But i also have numerous references to other forms within my Menu files i.e my mmb. I did the basic changes like search and replace all Form with menu etc etc.. i got my code compiled and running.
Problem is :-
If i have the CALL_FORM made within the Menu item code, it doesn't seem to pick it up. However i had another menu file where the CALL_FORM was made within a program unit ( i.e a procedure) and it picked up the reference and even converted it to lower case.
I wanted to know how to manipulate the code , to pick up form-references when made from menu item code as well... I am posting the code i used for changing the case of menus ...
thanks in advance.....
K

import java.io.BufferedReader;
import java.io.InputStreamReader;
import oracle.forms.jdapi.MenuModule;
import oracle.forms.jdapi.Jdapi;
import oracle.forms.jdapi.JdapiIterator;
import oracle.forms.jdapi.JdapiMetaObject;
import oracle.forms.jdapi.JdapiMetaProperty;
import oracle.forms.jdapi.JdapiObject;
import oracle.forms.jdapi.JdapiTypes;
import oracle.forms.jdapi.ProgramUnit;
import oracle.forms.jdapi.Trigger;
import oracle.forms.jdapi.MenuItem;
public class ChangeCase_Menu {
private static boolean uppercase =
false; /* change this boolean to what is required (for uppercase set true)*/
private static int changed =
0; /*variable indicating if any changes were accepted in the menu*/
public static void setInteger(int value) {
changed = value;
public static int getInteger() {
return changed;
private static int resetIter = 0; /*iterator for looping through objects*/
public ChangeCase_Menu() {
public static void main(String[] args) {
String text;
MenuModule mmd;
// Open the Menu
if (args.length < 1) {
System.out.println("Usage java ChangeCase_Menu Menuname.mmb");
System.exit(0);
else if (!args[0].toUpperCase().endsWith("MMB")) {
System.out.println("Works Only For Menus i.e only MMB ");
System.out.println("Usage java ChangeCase_Menu Menuname.mmb");
System.exit(0);
try {
mmd = MenuModule.open(args[0]); /*open the Menu*/
System.out.println("Open Menu " + mmd.getName());
loopObjects(mmd);
if (getInteger() ==
1) { /*save the menu only if something is changed in the triggers*/
System.out.println("Saving the menu to " +
mmd.getAbsolutePath());
mmd.save(mmd.getAbsolutePath());
System.out.println("Menu saved");
mmd.destroy();
} catch (Exception e) {
if (e.toString().endsWith("not found"))
System.out.println("Menu Does not exist");
Jdapi.shutdown();
private static void loopString(JdapiObject obj, String Text,
String finalText) {
boolean beenthere = false, setX = false, setZ = false;
int x = -1, y = -1, z = -1;
int t = -1;
String tempText = Text;
t = Text.indexOf("CALL_FORM"); /* search in trigger for a call_form **/
if (t == -1) {
x = Text.indexOf("OPEN_FORM");
t = x;
if (x != -1)
setX = true;
/* if call_frm is not found, then search for open_form*/
if (t == -1) {
z = Text.indexOf("NEW_FORM");
t = z;
if (z != -1)
setZ = true;
if (t != -1) {
System.out.println("\nThis is the current code for " +
obj.getName());
System.out.println("-------------------------------------------------------");
System.out.println(Text);
while (t !=
-1) /* loop if there are multiple call_form/open_form/new_form*/
beenthere = true;
finalText = changeText(obj, finalText, t);
y = t + 10;
tempText = finalText.substring(y, Text.length());
if (setX == false && setZ == false) {
t = tempText.indexOf("CALL_FORM");
} /* search in trigger for a call_form **/
if (t == -1 || setX == true || setZ == true) {
if (x == -1 && setZ == false) {
tempText = finalText;
y = 0;
setX = true;
if (setZ == false) {
x = tempText.indexOf("OPEN_FORM");
t = x;
/* if call_form is not found, then search for open_form*/
if (x == -1 || setZ == true) {
if (z == -1) {
tempText = finalText;
y = 0;
setZ = true;
z = tempText.indexOf("NEW_FORM");
t = z;
if (t != -1) {
t = y + t;
setX = false;
setZ = false;
if (beenthere == true) {
System.out.println("\nProposed change of code " + obj.getName() +
" to");
System.out.println("-------------------------------------------------------");
System.out.println(finalText);
System.out.println("\nDo you want to change this Text? (Y/N) ");
/* In this codepart I first question if you would like to make the change
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
Hard coding for batch process , uncomment if you want user interaction
try {
//String answer = br.readLine();
String answer = "Y";
while (answer.toUpperCase().compareTo("Y") != 0 &
answer.toUpperCase().compareTo("N") != 0) {
//answer = br.readLine();
answer = "Y";
if (answer.toUpperCase().compareTo("Y") == 0) {
System.out.println("changing the code");
if (obj instanceof Trigger) {
Trigger obj3 = (Trigger)obj;
obj3.setTriggerText(finalText);
} else if (obj instanceof ProgramUnit) {
ProgramUnit obj3 = (ProgramUnit)obj;
obj3.setProgramUnitText(finalText);
}else if (obj instanceof MenuItem) {
MenuItem obj3 = (MenuItem)obj;
obj3.setMenuItemCode(finalText);
setInteger(1);
System.out.println("changed the code");
if (answer.toUpperCase().compareTo("N") == 0) {
System.out.println("not changed");
} catch (Exception e) {
System.out.println(e);
private static String changeText(JdapiObject obj, String Text, int t) { /*In this code I search first for the substring of CALL_FORM or OPEN_FORM
*When this is found I search first for the first quote, then for the second quote
*This string returned I will put in uppercase, if you need lowercase, then
*change here Text2.substring(firstquote,secondquote).toUpperCase() to
*Text2.substring(firstquote,secondquote).toLowerCase()
String Text1 = Text.substring(0, t);
String Text2 = Text.substring(t, Text.length());
String finalText = Text;
int firstquote = Text2.indexOf("'", 0);
int secondquote = Text2.indexOf("'", firstquote + 1);
if (uppercase == true) {
finalText =
Text1 + Text2.substring(0, firstquote) + Text2.substring(firstquote,
secondquote).toUpperCase() +
Text2.substring(secondquote, Text2.length());
} else {
finalText =
Text1 + Text2.substring(0, firstquote) + Text2.substring(firstquote,
secondquote).toLowerCase() +
Text2.substring(secondquote, Text2.length());
return (finalText);
private static void loopObjects(JdapiObject obj) { /*this function will loop through all objects in the menu*/
JdapiMetaObject meta = obj.getJdapiMetaObject();
JdapiIterator iter = meta.getChildObjectMetaProperties();
while (iter.hasNext()) {
JdapiMetaProperty cprop = (JdapiMetaProperty)iter.next();
JdapiIterator kids =
obj.getChildObjectProperty(cprop.getPropertyId());
while (kids != null && kids.hasNext()) {
if (resetIter > 0) {
kids = obj.getChildObjectProperty(cprop.getPropertyId());
loopObjects((JdapiObject)kids.next());
resetIter = 0;
} else {
loopObjects((JdapiObject)kids.next());
if (obj instanceof Trigger) {
if (!(obj.isSubclassed())) {
// Get the trigger text make sure it exists.
String theText =
obj.getStringProperty(JdapiTypes.TRIGGER_TEXT_PTID);
if (theText != null) {
Trigger obj3 = (Trigger)obj;
String Text = obj3.getTriggerText();
String finalText = Text;
loopString(obj3, Text, finalText);
} else {
System.out.println("Error: This object " + obj.getName() +
"doesn't have any trigger text");
if (obj instanceof ProgramUnit) {
System.out.println("Found PU" + obj.getOwner().getName() + "." +
obj.getName());
if (!(obj.isSubclassed())) {
String theText =
obj.getStringProperty(JdapiTypes.PROGRAMUNIT_TEXT_PTID);
if (theText != null) {
ProgramUnit obj3 = (ProgramUnit)obj;
String Text = obj3.getProgramUnitText();
String finalText = Text;
loopString(obj3, Text, finalText);
} else {
System.out.println("Error: This object " + obj.getName() +
"doesn't have any PU text");
if (obj instanceof MenuItem) {
System.out.println("Found Menu Item Code " + obj.getOwner().getName() + "." +
obj.getName());
if (!(obj.isSubclassed())) {
String theText =
obj.getStringProperty(JdapiTypes.MENU_ITEM_CODE_PTID);
if (theText != null) {
MenuItem obj3 = (MenuItem)obj;
String Text = obj3.getMenuItemCode();
String finalText = Text;
loopString(obj3, Text, finalText);
} else {
System.out.println("Error: This object " + obj.getName() +
"doesn't have any Menu item code text");
}

Quotation(VA22) - How to change form - sap script or smartforms ?

Hallo,
as defaults, by VA22 I can print the quotation by sapscript.
I have to change form: I have to create a new smartforms instead sap script. in transaction V/30 I can set some parameters to change it.
My question is: Where is the correct parametrs to entry ?
(I entered the name of smartforms and a Z print program but I got an error message )
Any idea ?
Tks.

Hi,
I guess the terminology's causing some problems. Here's what I think you need to do;
In transaction V/30 select the Output Type then double-click on the folder 'Processing Routines'. The columns are as follows;
Medium - Print, email etc
Program - Name of the print program
FORM Routine - name of the subroutine in the print program that will be called
Form - Name of the SAPscript (if used)
PDF/Smartform Form - Name of the Smartform, or pdf form (if used)
Type - If a Smartform or pdf form is specified, select from this drop-down which type it is.
If you're getting an error when you enter your parameters, it would be useful if you told us what the error was.
Regards,
Nick

Delivery Date needs to be changed on Schedule lines

Hi All-
I am using BAPI_SALESORDER_CHANGE, to update the delivery date on the schedule lines...If I have 2 lines of schedule, needs to be updated the second one ETENR '0002'...
Bapi returns message that successfully processed, when I go back and look at Sales order, I don't se any changes on schedule line..
I am pssing into BAPI, sales doc and schedule line with the delivery date and the flag 'U'..and also I am using BAPI commit...
But, let me know if I am missing something and also let me know is it possible to change schedule delivery date or not?
Thanks,
Sony

Hi
Please follow this process.
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data.
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.

Status need to be change form PCNF to CNF

Similar Messages

Maybe you are looking for