Steps to build summarization tables for CO-PA
Hello Experts,
I recently deleted and re-created the COPA datasources to include some additional fields from the Operating Concern. However, I need to delete and re-create the COPA summarization tables as well to test my extractors. Can some of you provide me with a step-by-step solution to build the summarization levels.
Thanks,
Rishi
HI,
Go through the following links.
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c40864a0111d1894c0000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/57/f32c7dd435d1118b3f0060b03ca329/frameset.htm
Cheers..
Similar Messages
-
Building summarization levels for reporting
Hi All,
Our system is very slow to execute COPA reports. I am willing to create summarization levels.
1. I let the system create a proposal
2. I created hiearchy levels
3. I uploaded the levels with data
4. I checked whether reports are reading hierarchy level
I am a little bit confused how this summarization level is intedted to work. I tested the summarization. It works by 1-2 reports, but not for the rest.
So my question is, when a summarization level is applicable for a report?
For examle, if I summarize for customer... and in the report I have characteristics customer... does the system takes this summarization level or not? If in general I need customer in all of our reports as characteristics, I won´t be able to use summarization level for customer?I am looking somehow for similar answer.
When the system does proposal for sum. levels why the created levels are not used.
For your information. If you have just created new reports and hope to get them speed up it might not work properly.
When you use the proposal of levels the system analysis the ones last used. If some reports are used not often they might not be considered.
So you need to watch and fine tune it.
I noticed that the index which is important to access the level, does not really match our criteria. The sum. level might have the right data but not very good index.
Further you could check the usage of fixed characteristics. For example you copy a simple sum. level with certain data and you add fixed characteristics. Example, company code 01.
But the magical question when it is utilized is also open. Don't forget to activate the usage of sum. levels in the report attributes itself.
BR -
Do I need to install Oracle database 12c on PC to create tables for Weblogic server
Hi,
I am new to WebLogic and I am following a book Java EE Development
with Eclipse published by PACKT Publishing to learn Java EE. I have installed Oracle Enterprise Pack for Eclipse
on the PC and I am able to log into the WebLogic Server
Administration Console and set up a Data Source. However the next step is to create
tables for the database. The book says that the tables can be
created using SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic
Server Admistration Console. Aslo there is no SQL Command line
in DOS.
I have put a previous question on the Oracle Forum about the above and I was advised to use SQL Plus
to create the tables for the weblogic server but no mention was made of installing Oracle database.
I have downloaded InstantClient SQL Plus and Instantclient Basic on a PC and
put the files into the same directory C:\SQLPlus but now I am having a problem in that it is
looking for a username and password when I run the sqlplus.exe file.
Now I assume that I need to have an installation of Oracle databse on the
PC so as to be able to use SQL Plus. Am I correct in this or can I create tables for the
datasource in weblogic without an Oracle database?
Thanks in advance for your help. BrianYou should install it separately and also need to change the OBIEE's user.sh to tell it where is your Oracle client installed.
-
Fill Internal Header Table for VBUK via Doc. Flow Predeces.
Good Day,
I'd executed the step Fill Internal Header Table for VBUK via Doc. Flow Predeces in System Analysis Phase. It has been running for the past 7 days. We know that the problem might be that the "update statistics" is not updated since Febraury this year, this table has 20 million records.
Is there a possibility or how or where to find how much time is left, how many records it has been analyzed for this activity?
Thanks in advanced.
AnatoliiThank You very much dear colleagues for your advices and help!!!!!
I was able to resolve this problem with the following:
(as you told me before) Create standard M1 Index, in my case ZM1, with the field parameters VBEL, POSNV and VBELN ( MANDT it was not needed)
Using HINTS parameters from "Note 130480 - Database Hints in Open SQL for Oracle"
and changing the program: "CNV_TDMS_05_TI_I_CO_VBUK_2_C_N" in the sender system
before it was:
%_HINTS ORACLE 'full(VBFA) parallel(VBFA, 4)'. "#EC CI_NOFIRST
i was changed to:
%_HINTS ORACLE 'INDEX("&TABLE&" "VBFA~ZM1" "VBFA^ZM1")'. "#EC CI_NOFIRST
The Procedure finished successfully =)
With best regards,
Anatolii -
Steps to create f4 help for a table
steps to create f4 help for a table
These are the steps you have to take first:
1. Please elaborate, your question does not all too clear.
2. Search on SCN.
3. Search on help.sap.com (for creating F4 search help).
I guess you get the picture. Creating an F4 help is quite easy (you can find that on SCN for sure), but what do you mean by
for a table
1.Do you want to create a field which has an F4 help for searching tables or
2. is this field part of a table and you need to have a search help for that field of that table in order to select some sort of value
3. Is this a custom table.
4. Is this a custom field for which F4 help should be added.
5. Won't a domain value do.
6. etc. -
How to build a table with two For Loop
Hi,
I have two Loop For and I want to build a table with N columm (N = a loop + b loop)
You can see my example.
Thank's a lot
Attachments:
help_table.zip 10 KBI think this is the solution that you are going for.
-Jim
Attachments:
help_table.vi 26 KB -
How to automatically build a table with 2 alternated font colors for the lines ?
Hi,
I'm looking for a way to automatically build a table with alternate background color and alternate font color for the lines.
I have this particular project (a list of companies of an industrial area) and it is updated twice a year :
I managed to set an automated alternate background color of the lines so this works well (white/blue/white/blue...)
But the font color does not automatically alternates... and I do not know how to set this up...
All the companies are ordered alphabetically so when I have to insert or delete one, the whole text of the table under the modified line is messed up. Then I have unreadable white text on white background and blue text on blue background...
Does anyone have an idea on how to automatically alternate the font color ?
Thank you.
Best regards,
G.Hi,
I know this [JS] code is awful but it works. If someone wants to correct it …!
At the beginning, you have an Excel file. You play a little with it [doing concatenations] to get, after importing it in ID:
Then, just run the .jsx:
Done! -
Steps for setup tables for 2lis_08trfkz?clarification?
Hi guru's
we want to enhance the extrator 2LIS_08TRFKZ.
I just want to know which transaction we use to fill setup table for this extractor.
Do we use OLI8BW or something else
A quick response wil be highly appericiated.
Regards,
AmandeepHi Srikanth,
Thank you for a quick response.
Yes i have deleted the setup tables before filling them
the job status say it is finished
the only bit i am worried is the log which says the setup is for application 12 although we are running it for 2lis_08trfkz and which is under application 8(shipment).
Please clarify if this is the it is suppose to work.
Once again thank you very much for your help and time.
Regards,
Amandeep.
Start date 14.10.2006 Name of run TRFKZ
Start time 19:49:49 User name SINGAM
Date of terminatio00.00.0000 Application 12
Time of terminatio00:00:00 Source table LIKP
Finish date 15.10.2006 New run
Finish time 03:53:37 Document from 0000000000
Duration (min) 483.8 Document to ZZZZZZZZZZ
No. of docs 1,707,237 Version &(
Variant -
Select columns from table for display in alvgrid.
Hi all,
i have the following:
i do select a tablename and pass it as a parameter. then this table is loaded into an internal table and displayed in an alv-grid.
what i now want to do is a step between the both:
after the internal table with its structure is loaded, i want to display the field columns and i want them to be selectable so that in the next step the alv - grid is selected only with the selected columns ( just now it allways runs with all columns - even the not needed ).
Any ideas for that would be appreciated. Is there some tutorial on that or some sample ?hi
chk this sample code:
*REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
**reward if helpful
regards,
madhu -
Creation of New Table for Delivery Output Type.
Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys correct me and let me find a way.????
Thanks very much indeed.
Regards,
VivekHi If u have already the field in FC u can add with new entries .
Try with ,enter t- code <b>SE11</b>, enter <b>KOMB</b>- it will ask for access key get from basis and add u r Field catalog
Field catalog for condition key: output determination
If at all u want a new field tao add to u r FC u Can try with userexit.
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:<b></b>
Message was edited by:
SHESAGIRI GEDILA -
Report Builder 1.0 for SQL Server Reporting Services 2008 R2
We are trying to implement Ad-Hoc Reporting using SSRS 2008 R2.
First of all, it is very unhelpful that all SSRS books are for either 2008 or 2012, even though SSRS has major changes in 2008 R2 compared to 2008.
Our instructional materials indicate that we should build Report Models to abstract out our databases into terms familiar to our business users.
The problem we are having is the difference in functionality between Report Builder 1.0 and Report Builder 3.0. Report Builder 3.0 is touted as having the modern, ribbon based interface that is supposed to make end-users feel more comfortable. However,
all the documentation says that end users are supposed to use Report Builder 1.0 for Ad-Hoc Reporting. And, it seems, that the reports generated by Report Builder 1.0 are not round-trip compatible with all the other reporting tools for SSRS 2008 R2.
The documentation we have illustrates that Report Builder 1.0 is nice for Ad-Hoc reporting, because is based on connecting directly to Report Models, and the end users can directly drag-and-drop entities and fields into their reports.
When we try working with Report Builder 3.0, it seems we must first connect to the Report Model as a Data Source and then build a Dataset query on the Report Model. Only then are some entity attributes available to be dropped into the report.
If the user decides another source column is needed, they have to go back, edit the query, save the query, and then drag the column from the Dataset to the report. This does not seem end user friendly at all!
We are also concerned that if we train our users on the seemingly soon-to-be-obsolete Report Builder 1.0, and get them used to having direct Report Model access, that at some point we will have to move them to the Dataset-interrupted approach of Report Builder
2+. Highlighting this perception of impending obsolescence of Report Builder 1.0 is that in our shop that is starting with SSRS 2008 R2, we cannot figure out how to get a copy of Report Builder 1.0 in the first place.
We just don't see our end users being savvy enough to handle the steps involved with creating Datasets on top of Report Model Data Sources. So we would have to build the Datasets for them. But in that case, what point is there in creating any
Report Models in the first place if DBAs are the ones to make Datasets?
As such, it is hard to envision a forward-looking SSRS implementation that has the end user ease-of-use Ad-Hoc reporting that the SSRS 2008 documentation presents.
What is it that Microsoft actually wants/expects SSRS implementers to do?
Dan Jameson
Manager SQL Server DBA
CureSearch for Children's Cancer
http://www.CureSearch.orgHi Dan,
Report Builder 1.0
Simple template-based reports
Requires report model
Supports only SQL Server, Oracle, and Analysis Services as data sources
Supports RDL 2005
Bundled in SSRS
Report Builder 2.0 or later
Full-featured reports as the BIDS Report Designer
Doesn't require (but supports) report models
Supports any data source
Supports RDL 2008
Available as a separate web download
In your scenario, you want to use Report Builder 1.0 in SQL Server Reporting Services 2008 R2, I am afraid this cannot achieve. Report Builder 1.0 is available in the box in either SQL 2005 or SQL 2008. It is not available as a separate client apps and is
only available as a click once application.
Report Builder 1.0
Report Builder 3.0
Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
How can I build a table with the time values of a timer from a while loop
Hi:
I have a question concerning building a table:
Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
0msec 1V
100msec 2V
200msec 3V
300msec 4V
etc.
If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
Can I also save the table to a file or even to an Excelsheet? How can I do that?
Thanks for your help!Hi Craig:
thank you very much. To solve the mystery : ) :
I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
Thank you very much!
Steffi
Attachments:
motor.vi 238 KB
sensor.vi 59 KB -
How to extract data from table for huge volume
Hi,
I have around 200000 material doc number for which need to get material number from MSEG table but while using SE16 it gives dump , i have even tried breaking it into batches of 20000 records but still SAP gives dump on executing SE16 for MSEG. Please advise if there is any alternate way to get data from SE16 table for such a large volume.
Note: In our system SE16N does not work, only SE16 is there for our SAP version.
Thanks,
VihaanHi Jurgen,
Thanks for your reply.
I am getting Dump when i enter more than 5000 records as input parameter in MSEG, if I put more than that then it gives dump as "ABAP runtime errors SAPSQL_STMNT_TOO_LARGE ".
I understand that I can extract data restrciting 5000 every time but I have around 250000 material docs so that means if we consider batches of 5000 I need to run the step more 50 times--> 50 excel files. I wanted to avoid that as that is going to take lots of my time.
Any suggestion, please help.
Also wanted to highlight that apart from Material Doc number I am entering Plant (8 plants) and Mvt type (14 mvt type) also as input parameter.
Regards,
Vihaan
Edited by: Vihaan on Mar 25, 2010 12:30 AM -
How to extract data into the set-up table for 2LIS_06_INV LIS structure
We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction' -
How to build sql query for view object at run time
Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth AddankiAs I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_
Maybe you are looking for
-
Dump while downloading data from Application Server File in 4.6 system
Hi, When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c. When we faced similar kind of issue in ECC version, we have used the statement, Ignoring
-
How to send as alias with icloud account in Android mail
I have a Galaxy S4 and have set up my icloud account on the mail app. I need to be able to send from one of my alias's but I cannot sign into mail using that name. Is there a way to add this alias?
-
How to send an SMS with text and image
I'm trying to add a photo and text to an SMS but can't add anything in the body of the SMS. What do I need to do?
-
hi Could anyone please help in this case, if FEBP can be used to clear the open items automatically. Also, the interpretation algorithm used in global config is '001- standard algorithm'. Please suggest if automatic clearing of subledger can be achie
-
How can I change the email on my icloud or get in to it
i have an apple id but my icloud wont let me in because its telling me to check one of my other emails to verify the account but i dont have an email from apple in the mailbox. how can i change that please?? thank you !