Steps to migrate Project Server 2007 from SQL Server 2005 to SQL Server 2008?

We need to migrate Project server 2007 from SQL Server 2005 to SQL Server 2008.
1. Is it as simple as doing backup and restore of databases and pointing Project Server to the new DB server? Or there are some specific steps that should be followed?
2. Article at
http://technet.microsoft.com/en-us/library/dd207290(office.12).aspx is about moving databases from one DB server to another (same versions). At one place, it mentions to
backup all databases but at another place it mentions that
You should only back up the Draft and Published databases from the source database server.
What should be done when moving from 2005 to 2008?
Regards,
Amit
Gupta

High Level step you can get this form Tech net or MSDN too
Shut down the SharePoint servers (App / Web)
backup all of the SharePoint and Project
Server databases from the SQL 2005 server
copy these over to the new SQL 2008 server and restore all of
the databases with the same names
script out all of the logins used by SharePoint/PS from the SQL 2005 server and create these on the SQL 2008 server
script out the Delete expired sessions SQL job from the SQL 2005 server and create this on the SQL 2008 server - or create them manually on the SQL 2008 server
repoint the SQL server DNS Alias from the SQL 2005 server to the SQL 2008 server, if SharePoint and Project Server was installed using the actual SQL server name and no alias, you can create a DNS alias for the old SQL 2005 server name that points to the SQL
2008 server. This is so that the SharePoint servers can still connect to the same SQL server name
Start up the SharePoint servers
kirtesh

Similar Messages

Importing Data from MS Access into SQL Serevr 2005 via Linked Server: User-Dependent failure

I am operating an Express version of SQL Server 2005 on a Windows XP machine.
I have successfully setup a linked server to a remote Access (.mdb) database. With my user account (Windows authentication) I can retrieve and store data without any problem.
I have another user (apparently with same settings as my own account) that is always failing to get the data.
The Error message he gets is:
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TSU_Tmp" returned message "The Microsoft Jet database engine cannot open the file '\\DSITSO-NT0001\Exchange\Database5.mdb'. It is already opened exclusively by another
user, or you need permission to view its data.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TSU_Tmp".
Here below the code used to set up the linked server (coming from the Code Snippets of SQL Server 2005).
EXEC sp_addlinkedserver
@server = N'TSU_Tmp',
@provider = N'Microsoft.Jet.OLEDB.4.0',
@srvproduct = N'OLE DB Provider for Jet',
@datasrc = N'\\DSITSO-NT0001\Exchange\Database5.mdb'
EXEC sp_addlinkedsrvlogin
@rmtsrvname = N'TSU_Tmp',
@useself = N'TRUE',
@locallogin = NULL,
@rmtuser = N'Admin',
@rmtpassword = NULL
We both run the script, actually is a Stored Procedure, (see code below) on the same XP machine where SQL Server is running.
EXEC('INSERT INTO tblFcst
(StartBUCode, StartBUType, StartBUSeq, StartTrz, StartCty,
EndBUCode, EndBUType, EndBUSeq, EndTrz, EndCty,
FcstCreationPeriod, FcstValidForPeriod, Fcst, FcstExternalReference,
IsProcessed, IsSolved)
SELECT TSU.BUCodeSend, TSU.BUTypeSend, TSU.BuaNoSend, Null AS StartTrz, Null AS StartCty,
TSU.BUCodeRcv, TSU.BUTypeRcv, TSU.BuaNoRcv, Null AS EndTrz, Null AS EndCty,
TSU.[Current week], TSU.[Forecast for week], TSU.[Volume trp m3], TSU.[TSU_ID (Don''t touch me)],
0 AS IsProcessed, 0 AS IsSolved
FROM TSU_Tmp...tbl_TSU_trpm3 AS TSU;')
PS: it is run using an 'EXEC(String)' format as at compile time of Store Procedure the Linked Server is not existing and otherwise compile would fail.
We tried it with different files, in different locations. It always wors for me, never for him...
The files were not used by anyone else. The folder(s) where they were stored are open to "Everyone".
So I concluded it should be something linked to the User... :) But I really do not know what, as said apparently we have exactely the same setup in our Login profiles.
Any idea or suggestion is welcome.
Thanks
Luca

Hi Luca Lentati,
According to your description and T-SQL statement, we need to verify if the download and install the Microsoft.Jet.OleDB.4.0 as a provider.
If the 64bit SQL Server is running on the server, The error, the Microsoft.Jet.OleDB.4.0 is not support, I reommend you download and install the Microsoft.ACE.OLEDB.12.0 as a provider.
The error 7303 message indicates that the linked server does not have correct login mapping. You can execute the sp_helplinkedsrvlogin stored procedure to set the login information correctly. Also, verify that you have specified the correct parameters
for the linked server configuration.
In addition, if the issue still exists, I recommend you copy the access file to local Server, and create linked server between them , check if it can run well. If yes, it means that
the account which SQL server uses to run the service does not have read/write access to that file share.
There is an article about configuring a Linked Microsoft Access Server on SQL 2005 Server , you can review the following article.
http://www.aspfree.com/c/a/Microsoft-Access/Configuring-a-Linked-Microsoft-Access-Server-on-SQL-2005-Server/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Migrate MS Access 2007 multi-valued fields to MS SQL 2012

Hi! I do have a MS Access data base (made of MS Access 2007) which has an Attachement field. As you know Attachment DataType is a multi-valued field that replaces the Object Link Embedding (OLE) Object DataType in the new Access Database (ACCDB) file
format. At present the whole DB has reached to the max size which is 2GB. Since we want to use the data and add more data to it, I was tasked to findout ways of converting it to SQL server. I have tried to use Import and Export data x32 module to import data
from MS Access to MS SQL Express 2012. All the data were imported except the BLOBs at the Attachement filed. Could you please help me to import those BLOBs to MS SQL DB. Thx!

Hello,
About those OLE objects, please try the following article:
http://www.codeproject.com/Articles/90908/Saving-OLE-Object-as-Image-Datatype-in-SQL
Another recommended resources:
http://www.microsoft.com/en-us/download/details.aspx?id=28763
http://blogs.msdn.com/b/ssma/archive/2011/03/06/access-to-sql-server-migration-understanding-data-type-conversions.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

What are the steps to Migrate a Web Service from Tomcat to JBoss

Hi,
I am totally new to JBoss and need some help. I mostly worked on BEA and Oracle. I have a web service deployed on Tomcat that needs to be now migrated to JBoss. What are the steps in moving a web service from Tomcat to JBoss.
Is there some step by step tutorial on developing and deploying a web service on JBoss along with sample build script.
Any help is really appreciated.
Thanks

R u using axis. If you want to stick with axis and don't want to use JBossWS there is nothing else you need to do. Move all the axis to Jboss. If you plan to reimplement all ur services in JBossWS here it is:
http://jbws.dyndns.org/mediawiki/index.php?title=Quick_Start
http://jbws.dyndns.org/mediawiki/index.php?title=User_Guide
Let me know if you need anything else.

Steps in migrating Web and mailman from one server to another

I am minimally skilled so am taking this slowly
I currently have a server set to manage several websites all on the same IP forwarded from a DSL modem. Also Mailman provides list distribution for several of the websites. That box also serves as a primary DNS within my subnet behind the modem. My question is what services to I transfer first to make sure I have it right. Shooting from the hip, I would say I do it in this order:
~ Set up the multiple web sites on the new server.
~ Set up mail services on the new server
~ Set up the mailman services on the new server.
~ Change the port forwarding on the modem from the old box to the new one so the outside world now gets sent to the new server
~ Change DNS services for the intranet
Does this sequence make sense or am I missing something?

Actually, I migrated using a process in this thread:
http://discussions.apple.com/message.jspa?messageID=6390958#6390958
and it worked very well. Had to do a lot of clean-up to get Apache to work correctly but now it does.

Import into SQL Server db from Sybase 7 data source - SQL Server 2008 R2/2012

Hi,
I need to import Sybase 7 data into a SQL Server 2008 R2 or 2012 database.
Has anyone any experiences about this import?
Thanks

The nuance is in basically setting your connection manager right.
If I remember correctly, I did that using the ODBC/ADO, but I do not remember the Sybase version.
I suggest you visit a post dedicated to this operation (the author chose to use the ADO.NET type of a provider):
http://msbimentalist.wordpress.com/2013/11/01/import-and-export-from-sql-server-to-sybase-db-using-ssis/
Arthur My Blog

Migrate NSS volume data from OES2-SP1 to OES2-SP3 server fails

Hello forums
I have a senario where we want to use miggui to migrate all files/folder
and trustees, to e new server using miggui.
When we try to migrate from the existing "VOL" from the old OES2-SP1
server, we get an error on the miggui log running on the new OES2-SP3
server like this:
ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 269) No
data sets can be found or the resource is not available.
In the miggui the Volumes can be dragged and dropped fine.
I do not by not know the old OES2-SP1's patch level, nor the OES2-SP3's
at this time.
Any ideas of what causes this error?
- Michael

Have you looked at this?
Troubleshooting data migration issues with miggui
I'd check and maybe see if the sms/tsa code is working properly on the OES2 SP1 server.

Steps to migrate Hyperion Planning application from 9.2.0 to new 9.3.1 env

We currently have 9.2.0 Hyperion planning installed in a windows env. We are planning to setup a new Hyperion planning env on a totally new hardware upgraded env. Would be appreciate if some can outline steps invloved to migrate Hyperion Planning apps, forms, BR ect from 9.2.0 to the newly setip 9.3.1 env. Is there any documentation, URL's to do the above. Any help would be greatly appreciated. Any issue to look out for, setbacks details would be helpful.
Thanks..

Hi,
One way of doing it would be :-
Create a new database for your planning application 9.3.1
Create a datasource to the database
Create a fresh planning application on version 9.3.1 make sure the admin is the same name as your old 9.2 planning app
Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created
Stop Planning
Restore the 9.2 planning application database over the one created in the first step
Go into the HSP_USERS table and update the SID for user id 50001
Start planning
Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
If you are requiring to migrate users as well, you will have to make sure you create them in Shared Services and then use the updateusers utility in the planning bin directory.
Or you could try using the copy app utility though I don't believe it is the best utility about and not sure how it handles between different versions(http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch09s01.html)
Cheers
John
http://john-goodwin.blogspot.com/

MS SQL Server upgrade from 2000 to 2005

I'm running SAP Tools for MsSQL server and my database version that is running on my system is 8, I'm getting an error saying that the SAP tools can only work with version 9.
Is there an older version of SAP Tools to work with MS SQL Server version 8 ?
Thanks.
George

Hi,
what is the version of the Sap tools ? generally all sap executables are downward compatible.
Regards,
Siddhesh

Migrating Hyperion Planning Applications from 11.1.2.2(old server) to 11.1.2.3(Development Server)

HI All,
I have 1 PSPB, 1 PFP and one OPEX Planning Applications in 11.1.2.2 old server which we are planning to move these apps into new development server having Hyperion11.1.2.3v installed. I have gone thru few documents but im still in dilemma that can we go ahead with LCM backup and export apps in old server thru LCM backup and place it in File system area of new development server like we do usually or do we need to upgrade the 11.1.2.2 old server with maintenance release and then taking LCM backup of that upgraded applications only, we can migrate in new server having 11.1.2.3?
Please guide
Thanks

A)Created a planning shell application with the same name as that of 11.1.2.2 planning application
B)Backup 11.1.2.2 planning schema
c)Restore the old schema 11.1.2.2 to new environment 11.1.2.3
D)update the SID ,Only if the userid (Default :admin) is different for 11.1.2.3 version
E)Restart the planning services
or make use of Planning Upgrade wizard
A)Logon to workspace (11.1.2.2)under Administer-> Classic Application Administration-> Planning Administration
B)Go to Classic Application Wizard ->Upgrade Wizard
or also try with the lcm way.
Thanks,
Sreekumar Hariharan

How to migrate Java Dictionary content from the one to the other server?

Good day!
We have a few developments which uses java dictionary DC and JPA. It's on NW CE7.2. Now we need to migrate all developments to NW 7.4. The question is how to migrate all java dictionary content for these developments? The main purpose not to develop any more:).
Thanks in advance!

I think the problem is solved.
Through the SQL Developer (Oracle) we can export the needed data and import it again where we need it.

IChat Server - Moving from one Mac OSX 10.5 server to another

Hi
I have found and read several posts about migrating Mac OSX 10.4 iChat to Mac OSX 10.5, but that's not quite what I want to do. I have deployed a new Xserve on our network and have moved/migrated all services from my old Mac OSX 10.5 server to the new unit now, with the exception of iChat.
Does anyone know how I can move all of my existing users/settings across from one server to another? I don't really want to have to recreate all the set-up on the new server and it would be much easier if there was a way of moving the iChat Server from one server to another. iChat seems to install itself in lots of places on 10.5 server and I suppose I'm looking for somebody who can tell me which files/folders need to be moved over to the new unit in order for it to work.
Thanks in advance.
Paul

Paul,
stop the ichat server on both machines using:
sudo launchctl unload /System/Library/LaunchDaemons/org.jabber.jabberd.plist
make a backup of /etc/jabberd, /var/jabberd on the target machine
copy the contents of the directories /etc/jabberd and /var/jabberd from the source machine to the destination machine, ensuring that owners and file permissions are maintained.
restart the ichat server on the target machine thus:
sudo launchctl load /System/Library/LaunchDaemons/org.jabber.jabberd.plist
and it should work. I say should 'cos I have never actually had a reason to do this, but there is no reason I can see that this will not work.
Note that this assumes that the user community (names) on the target machine are the same as the source, certificates if you use them are in the same place and, I guess it should go without saying, but the name of the ichat server and DNS names are the same. Note that DNS must be correct and pointing to the target machine.

Can I install the Exchange Server 2010 from my SBS2011 onto a sceond server, whilst still keeping the SBS2011 ?

Hi,
My customer currently has an HP Proliant ML350p G8 running SBS2011.
What they want to do is install the whole Exchange Server 2010 onto a second server which is running Server 2008 R2 Standard which is on the domain as an additional Domain Controller.
Is this possible ??
Many thanks
Alan Skinner

Running Exchange Server on a DC is supported. Here are some issues you can get:
http://support.microsoft.com/kb/940845
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Migrating applciation from weblogic to oracle 9i application server(OC4J)??????

Hi,
I am migrating my ejb application from weblogic to oracle 9i application server.What changes are needed to be made in code and what configuration changes are required.
In my application i use a couple of session beans wherin a session bean calls the method of the other session bean which acceses the database.I am using a jdbc thin driver for the database connection. is it possible for a session bean to call a method of another session bean which access the database??This concept works well in weblogic where the current application is running.
The problem is that while migrating the application to the orion server, it gives an OrionCMTException ...
memory leak..etc.
Could any one clarify.
Thanks in advance!!!

Hi Avi and Harrison,
Cease Fire avi!!!!.First of all let me clear the issue of posting the same problem twice.Well, when i mentioned the problem the first time , i found the title session bean deployment was not right and few people would look into it as it was a common problem so i thought it would be appropriate if i mentioned the title correctly , so i posted the query again with the change in title.
Now coming to the answer for ur questions.
The platform used is MS Windows NT.
The (OC4J) version is 1.0.2.2.1.
I am not using JDeveloper.
The database is oracle 8i and i am using the thin driver.
The beans to be deployed are stateless session beans.
The client involved is a web client i.e a jsp application.
The first session bean is as follows.
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import java.sql.Timestamp;
import java.rmi.RemoteException;
import java.util.Date;
import javax.ejb.*;
import javax.naming.*;
import initcontext;
import PrintMessage;
import JB_B2B_ERROR_PARSER;
* @stereotype SessionBean
* @homeInterface DB_UTILITYHome
* @remoteInterface DB_UTILITYRemote
public class DB_UTILITY implements SessionBean
     private SessionContext context;
private ResultSet rs = null;
private Statement stmt = null;
private Connection con = null;
private PrintMessage print = null;
public DB_UTILITY()
rs = null;
stmt = null;
con = null;
print = new PrintMessage();
     public Connection getConnection()throws RemoteException
          InitialContext initctx = null;
          Connection con = null;
          try
               initctx = initcontext.getContext();
               javax.sql.DataSource ds =
(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
               con = ds.getConnection();
//(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
catch(NamingException namingexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", namingexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("AppError",
"Epool-10001", "DB_UTILITY.getConnection"));
catch(SQLException sqlexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception),
"DB_UTILITY.getConnection"));
catch(Exception exception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("EpoolError",
"Epool10005", "DB_UTILITY.getConnection"));
          return con;
     public String getDate()throws RemoteException
          String Date=null;
          try
               con=getConnection();
               stmt=con.createStatement();
               rs=stmt.executeQuery("SELECT
TO_CHAR(SYSDATE,'YYYY-MM-DD HH:MI:SS') FROM DUAL");
               while(rs.next())
                    Date=rs.getString(1);
               stmt.close();
               con.close();
catch(SQLException sqlexception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception), "DB_UTILITY.getDate"));
catch(Exception exception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("epoolError",
"Epool10005", "DB_UTILITY.getDate"));
finally
try
if(con != null && !con.isClosed())
con.close();
catch(Exception exception2)
stmt = null;
con = null;
          return Date;
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
Also the xml files are as follows.
web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<display-name>AddressBook Web Application</display-name>

<description>Web module that contains an HTML welcome page, and 4 JSP's.</description>

<welcome-file-list>
<welcome-file>B2B_COUNTRY_CODE.jsp</welcome-file>
</welcome-file-list>
<ejb-ref>
<ejb-ref-name>SB_B2B_COUNTRY_CODEHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>SB_B2B_COUNTRY_CODEHome</home
<remote>SB_B2B_COUNTRY_CODERemote</remote>
</ejb-ref></web-app>
Application.xml
<?xml version="1.0"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN" "http://java.sun.com/j2ee/dtds/application_1_2.dtd">
<application>
<display-name>Country Code</display-name>
<module>
<ejb>epool_CountryCode-ejb.jar</ejb>
</module>
<module>
<web>
<web-uri>epool_CountryCode-web.war</web-uri>
<context-root>/epool_CountryCode-web</context-root>
</web>
</module>
</application>
ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN" "http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd">
<ejb-jar>
<description>epool_CountryCode</description>
<enterprise-beans>
<session>
<display-name>CountryCode Session
Bean</display-name>
<ejb-name>SB_B2B_COUNTRY_CODERemote</ejb-name>
<home>SB_B2B_COUNTRY_CODEHome</home>
<remote>SB_B2B_COUNTRY_CODERemote</remote>
<ejb-class>SB_B2B_COUNTRY_CODE</ejb-class>
<session-type>Stateless</session-type>
<ejb-ref>
<description>EJB Epool DButility</description>
     <ejb-ref-name>DB_UTILITYRemote</ejb-ref-name>
               <ejb-ref-type>Session</ejb-ref-type>
               <home>DB_UTILITYHome</home>
               <remote>DB_UTILITYRemote</remote>
          </ejb-ref>
          <ejb-ref>
          <description>EJB Entity Bean</description>
<ejb-ref-name>EB_B2B_COUNTRY_CODERemote</ejb-ref-name>
               <ejb-ref-type>Entity</ejb-ref-type>
               <home>EB_B2B_COUNTRY_CODEHome</home>
          <remote>EB_B2B_COUNTRY_CODERemote</remote>
          </ejb-ref>
</session>
<session>
<display-name>DbUtility Session Bean</display-name>
<ejb-name>DB_UTILITYRemote</ejb-name>
<home>DB_UTILITYHome</home>
<remote>DB_UTILITYRemote</remote>
<ejb-class>DB_UTILITY</ejb-class>
<session-type>Stateless</session-type>
</session>
<entity>
<ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
     <home>EB_B2B_COUNTRY_CODEHome</home>
     <remote>EB_B2B_COUNTRY_CODERemote</remote>
     <ejb-class>EB_B2B_COUNTRY_CODE</ejb-class>
     <persistence-type>Container</persistence-type>
     <prim-key-class>EB_B2B_COUNTRY_CODEPK</prim-key-class>
     <reentrant>False</reentrant>
     <cmp-field>
     <field-name>country_code_desc</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>phone_format_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_date</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_phone_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_tax_percent</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>sort_order</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_modified</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_modified</field-name>
     </cmp-field>
     <resource-ref>
     <description></description>
     <res-ref-name>jdbc/ePool</res-ref-name>
     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
     </resource-ref>
</entity>
</enterprise-beans>
<assembly-descriptor>
     <container-transaction>
          <method>
               <ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
               <method-name>*</method-name>
          </method>
          <trans-attribute>Required</trans-attribute>
</container-transaction>
<security-role>
<description>Users</description>
<role-name>users</role-name>
</security-role>
</assembly-descriptor>
</ejb-jar>
The session bean which uses the above session bean is as follows.
import javax.ejb.SessionContext;
import javax.ejb.SessionBean;
import java.sql.*;
import javax.naming.Context;
import java.sql.Timestamp;
import java.util.Vector;
import initcontext;
import DB_UTILITYHome;
import DB_UTILITYRemote;
import EB_B2B_COUNTRY_CODEHome;
import EB_B2B_COUNTRY_CODERemote;
import EB_B2B_COUNTRY_CODEPK;
* @stereotype SessionBean
* @homeInterface SB_B2B_COUNTRY_CODEHome
* @remoteInterface SB_B2B_COUNTRY_CODERemote
public class SB_B2B_COUNTRY_CODE implements SessionBean
     private SessionContext context;
     * Sets the context of the bean
     * @param context The Bean's Context
     public Vector selectCountryCode(String query,String
countquery, String pagenos) throws Exception
          Context ctx = initcontext.getContext();
          Connection con=null;
          Vector records=new Vector();
          int pageno=Integer.parseInt(pagenos);
          int min=(pageno-1)*10;
          int max=pageno*10;
          int counter=0;
          boolean recordsfound=false;
          try
               DB_UTILITYHome home =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote remote =
(DB_UTILITYRemote)home.create();
               con=remote.getConnection();
               Statement stmt = con.createStatement();
               ResultSet rscount =
stmt.executeQuery(countquery);
               while(rscount.next())
                    int temp=rscount.getInt(1);
                    int pagecount=temp;
                    pagecount=pagecount/10;
                    if((temp%10)>0)
                    pagecount=pagecount+1;
                    records.addElement(""+pagecount);
               ResultSet rs = stmt.executeQuery(query);
               while(rs.next())
                    counter++;
                    if(counter>min && counter<=max)
                         String row[]=new String[8];
                         recordsfound=true;
                         row[0]=rs.getString(1);
                         row[1]=rs.getString(2);
                         row[2]=rs.getString(3);
                         row[3]=rs.getString(4);
                         row[4]=rs.getString(5);
                         row[5]=rs.getString(6);
                         row[6]=rs.getString(7);
                         row[7]=rs.getString(8);
                         records.addElement(row);
          con.close();
          catch(Exception e)
               System.out.println("Error in selecting Country
Code "+e);
               throw new Exception("Error in selecting Country
Code "+e);
          return(records);
     public void insertCountryCode(String country_code, String
country_code_desc, String country_phone_code, String
phone_format_flag,String active_flag, String sort_order,String
country_tax_percent)throws Exception
          Context ctx = initcontext.getContext();
          Double Sort_Order=null;
          Double cntry_tax_prct=null;
          if(sort_order!=null && sort_order.length()>0)
          Sort_Order=new Double(sort_order);
          if(country_tax_percent!=null &&
country_tax_percent.length()>0)
          cntry_tax_prct=new Double(country_tax_percent);
          String user_created=null;
          Timestamp date_created=null;
          Timestamp active_date=null;
          String user_modified=null;
          Timestamp date_modified=null;
          try
               DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote dbremote =
(DB_UTILITYRemote)dbhome.create();
               user_created=dbremote.getUser();
date_created=Timestamp.valueOf(dbremote.getDate());
               active_date=date_created;
               EB_B2B_COUNTRY_CODEHome home =
(EB_B2B_COUNTRY_CODEHome)ctx.lookup("java:comp/env/EB_B2B_COUNTRY_CODER
emote");
               EB_B2B_COUNTRY_CODERemote remote =
(EB_B2B_COUNTRY_CODERemote)home.create(country_code, country_code_desc,
country_phone_code,active_flag, phone_format_flag,user_created,
date_created, active_date, Sort_Order, user_modified,
date_modified,cntry_tax_prct);
          catch(Exception e)
               System.out.println("Error in Creating COUNTRY
Code "+e);
               throw new Exception("Error in Creating COUNTRY
Code "+e);
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
The jsp client which acces the beans is as follows.
<BODY >
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<%@ page import="initcontext" %>
<%@ page import = "java.util.*" %>
<%@ page import="DB_UTILITYHome"%>
<%@ page import="DB_UTILITYRemote"%>
<%@ page import="javax.naming.*"%>
<%Connection con=null; %>
<script src="search_getvalues.js">
</script>
<form name=frm1>
<%! int intCount,intI,intRowCount,intJ;
String strtname=new String();
String strhidden=new String("txthdn");
     Statement st;
     ResultSet rs;
     ResultSetMetaData rmeta;
....%>
<%
try
     Context ctx = initcontext.getContext();
     DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
     DB_UTILITYRemote dbremote = (DB_UTILITYRemote)dbhome.create();
     con=dbremote.getConnection();
     st=con.createStatement();
     rs=st.executeQuery(strsqlquery);
     rmeta=rs.getMetaData();
intCount=rmeta.getColumnCount();
....... %>
</form>
</BODY>
</HTML>
The resulting exception generated is as follows:
D:\oc4j\j2ee\home>java -jar orion.jar
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... done.
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e\epool_CountryCode-web.war... done.
Auto-deploying epool_CountryCode (New server version detected)...
Auto-deploying epool_CountryCode-ejb.jar (No previous deployment
found)... done.
Error deploying
file:/D:/oc4j/j2ee/home/demo/messagelogger/messagelogger-ejb.jar homes:
No javax.jms.Destination found a
t the specified destination-location (jms/theTopic) for
MessageDrivenBean com.evermind.logger.MessageLogger
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
Auto-deploying epool countryCode example (New server version
detected)...
************************1
************************2
COUNT QUERY :SELECT COUNT(COUNTRY_CODE) FROM BAP_COUNTRY_CODE
QUERY :SELECT
COUNTRY_CODE,COUNTRY_CODE_DESC,COUNTRY_PHONE_CODE,PHONE_FORMAT_FLAG,COU
NTRY_TAX_PERCENT ,SORT_ORDER,ACTIVE
FLAG,ACTIVEDATE FROM BAP_COUNTRY_CODE order by COUNTRY_CODE
Error in selecting Country Code java.rmi.RemoteException: Error
(de-)serializing object: com.evermind.sql.OrionCMTConnec
tion; nested exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
JB:Error in selecting country cd java.lang.Exception: Error in
selecting Country Code java.rmi.RemoteException: Error (d
e-)serializing object: com.evermind.sql.OrionCMTConnection; nested
exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
Error in Selecting Records
OrionCMTConnection not closed, check your code!
LogicalDriverManagerXAConnection not closed, check your code!
(Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... Error unpacking: IO Error:
The system cannot find the path specified
Error updating application epool_CountryCode: Unable to find/read
assembly info for D:\oc4j\j2ee\home\applications\epool_C
ountryCode\build\epool_CountryCode (META-INF/application.xml)
But if the DBUTILITY session bean is changed to a simple bean and accessed the code works fine and i am able to retrieve the data.Is the problem there because u one session bean cannot access a database connection method from another one or could it be because of the driver???
I hope i am clear.Please revert back in case any more references are needed.
Thanks in advance!!!!!!

Steps to migrate Project Server 2007 from SQL Server 2005 to SQL Server 2008?

Similar Messages

Maybe you are looking for