Stereo shows Mono in viewer???

I have a stereo track on the time line, it's recorded in stereo and is linked on the time line but when I double click it to load it to the viewer, it goes to mono and shows Mono (a1) and Mono (a2) tabs in the viewer with ONE waveform and overlay...I should see two waveforms and two overlays one on top of the other for stereo.
Why is it separating it when I load it? I've never seen this before. I double checked the camera settings and FCP settings and it's set for stereo. Any thoughts why it's splitting it to mono once loaded to the viewer? Thanks.
Using FCP 6 latest everything, etc....

Hmm. I have basically the same question, I'm afraid. FCP 6.0.5 latest OS X. I am using the HDV Easy Setup, so the Audio/Video Settings Capture Presets are set to HDV (and it's got a padlock to the right). I was ingesting audio and video shot on a Canon XLH1a with two different XLR Sennheiser mics on two people. I'm doing this using a Sony HVR-M15AU at 1080p/30F.
In FCP I see linked Mono not stereo as the original poster described. Is there some other setting I need to change so get linked stereo??
Thanks,
Andy

Similar Messages

How to view 'stereo' vs 'mono' in GarageBand 10.0.2?

How to view 'stereo' vs 'mono' in GarageBand 10.0.2?
Thanks

Tjed wrote:
Could that have something to do with why I got no sound out of the external monitors (speaker)?
it's possible, if for instance the track was set to channel 1 (mono) and you were sending a signal on channel 2 (or any other channel your interface might offer), but you may want to start a new thread with this issue providing all background info for it

Mono/stereo field in iTunes view options

How do I add a mono/stereo field to the view options in iTunes?
I have over 20 years experience working with professional bands but am now deaf in 1 ear so I understand what mono is.
This would help sort a 128 kbs stereo copy of a song that is about half the quality of a 128 kbs mono copy of the same song.

Dot-Khan wrote:
How do I add a mono/stereo field to the view options in iTunes?
If Apple's iTunes software engineers did not design-in a particular feature or function, you can't add one yourself, unless you are a skilled programmer or hire one to do it for you. Even then, I expect that modifying the code is a violation of the end-user license agreement (EULA).
If I understand your motive, you could rename mono files to distinguish them from others, or perhaps use an existing field - there are quite a few sort fields not typically used - and place an 'M' there to easily sort those tunes.

Stereo-to-mono glitch when match-framing

While searching for an answer I found a posting from ChiaMac dated Nov. 15, 2005 which describes the same problem I am experiencing. I have pasted the post below. Does anyone have an answer ?
Hi,
Three different editing systems, all running OS 10.3.9 and FCP 4.5 -- an iBook G4, PowerMac G5, and PowerMac G4.
Quite often, when match-framing in the timeline to bring up a clip in the viewer, the viewer will show dual mono audio, whereas the source clip has stereo audio. Then, when I try to cut that viewer clip into the timeline, in this sequence or another, it will be dual mono. Quite irritating.
It is quite replicable. Not all clips will produce the stereo-mono result, but it is replicable with the same clips over and over.
The "linked selection" has no effect on the process, no one has pressed command-L by mistake, and all audio settings on each of the systems are set to capture and output in stereo.
Is this a known FCP 4.5 HD glitch? I haven't seen it listed anywhere when I've searched for it. Any ideas, suggestions...?

>When converting a file from stereo to mono, Audition severely suppresses the amplitude of the entire file. This happens when using both the Convert Sample Rate method, as well as exporting a file from multi-track.
>It gets weirder: files that were recorded quite a while back will process this conversion just fine, but newer ones will not. All files are recorded in 16-bit 44100 stereo and saved as a Windows PCM wav file - so as far as I can tell there is no difference and I'm simply confounded.
Generally when this happens, it means that there isn't that much stereo (ie, difference between the two channels) in the file anyway, and one of these two channels is inverted - so that what happens when you combine them is that the 'mono' parts then cancel out, rather than add together, and all that's left is the difference - which looks pretty much like what you've got.
To test this, the thing to do is to select one channel only in EV, and invert its polarity (Effects>Invert). If you now get more like the waveform you were expecting when you convert to mono, then you've found the cause. But not necessarily the reason for it...

Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
Thankyou
Andrew.

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

Problem with Css styles not showing in live view or when i browse

I am using Mac osx 10.6 and building website with Dreamweaver CS5. Sometimes div tags i create not showing styles or rendering in live view or when I browse but showing in design view. I looked in dreamwever faq and they talk about not showing in design view to toggle the display styles. That is not the problem becuase it is check marked and I tried turning off and turning on and made no difference.I am using firefox browser.
It happened before the other day too. But all of my other pages in this site that i have created the same way building with div tags and css styles. So not sure what the problem is. Maybe someone has a suggestion here.
Johanna

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Portfolio</title>
<style type="text/css"></style>
<link href="css/jbstyles.css" rel="stylesheet" type="text/css" />
<style type="text/css"></style>
</head>
<body>
<div id="wrapper">
<div id="mainnav">
    <div id="navbar">
      <ul>
        <li><a href="index.html"><br />
        </a></li>
<li>
          <ul>
            <li><a href="index.html">          Home</a><a href="about.html">About</a></li>
            <li><a href="portfolio.html">Portfolio</a><a href="contact.html">Contact</a></li>
          </ul>
        </li>
      </ul>
</div>
    <div id="contentinside">
      <div id="navbar2">
        <ul>
          <li><a href="design.html">Design</a></li>
          <li><a href="multimedia.html">Multimedia</a></li>
          <li><a href="webdesign.html">Web Design</a></li>
        </ul>
      </div>
      <div id="mm1thumb">Content for id "mm1thumb" Goes Here</div>
      <div id="mm2thumb">Content for id "mm2thumb" Goes Here</div>
    </div>
    <img src="images/multimsidebar.gif" width="212" height="615" alt="mmsdbr" longdesc="http://multimsidebar" />
<div id="footer">
    <p> </p>
    <p>Johanna Bresnahan</p>
    <p>Web & Graphic Design - http://www.johannabresnahan.com</p>
    <p> email: [email protected] ....phone....857•991•5717<br />
</p>
</div>
</div>
</div>
</body>
</html>
Here is the html code above. not sure how to attach my file so get a visual. This is the first time I have used this forum.
Johanna

Ical events showing in week view as an hour later than the details in event

Hi all,
I've just been upgrading my ical / mobileme and I can't figure this out. All time zones are set to London-UK. If I look up appointments in week view all my calendars are colour coded. One particular calendar appears 1hr late with appointments. When I go into the details of this even it show correct time. For example. Kids school looks like it's in for 9:50 in week view but when I go into appointment it reads the correct time of 08:50?
Any ideas. Thanks

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

Sub folders not showing in Explorer view

Hi,
We have a totally standard Sharepoint 2013 installation. We've noticed this week that in some document libraries when opening them up in Explorer view it doesn't display all the sub folders in that library/folder. It's a real pain when users have a folder
with 20+ documents and want to move them somewhere else and can't because one of the folders aren't showing up. Manually moving them one by one is pretty tiresome.
If I remove the subfolder in Sharepoint and then recreate the folder in Explorer view that works fine, so it's not that the name is too long. It's not a permission thing since I'm site collection admin. Same issue on Windows 7 and Windws 8. Tried different
logins. Just can't wrap my head around this issue or what's causing it.
Any ideas?

Hi Kristoffer,
I have seen an attribute for folder object which could control SharePoint folder hide or show in webdav explorer view, you can use PowerShell to output the problematic folder property, see if it the case, then use the PowerShell code to set it's property
with blank value to make it show in explorer view,
Use the PowerShell to get the folder object and then check the property value with this code line $folder.Properties["vti_winfileattribs"]
#folder can be site, library level and folder level
$folder = (Get-SPWeb http://sp).Folders["shared documents"].SubFolders["folder1"]
#hide folder
$folder.Properties["vti_winfileattribs"]="00000016"
#show folder
####$folder.Properties["vti_winfileattribs"]=""
$folder.Update()
https://social.technet.microsoft.com/Forums/lync/en-US/9ceafb38-24dc-466c-b497-2cee062b81cf/explorer-view-hidden-folder-attribute?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support

Errors are not showing in Tasks view

Hello,
I dont know why errors are not showing in Tasks view after I click Save All Metada, they only show when a Rebuild de project. This start to happen after a few days, can anyone tell me how to fix this?
Thanks

Hi Carol,
After rebuild all compile time dependency and syntax might be checked and something is missing then errors suppose to come.
If you have doubt you can re install the NWDS...
Deepak!!!

I use Microsoft Outlook for email, and every day, dozens and dozens of times per day, a blank white Firefox window pops up and says "There are no items to show in this view."

That’s all it says in the whole window that opens up. There doesn’t seem to be a specific thing I do that makes it happen and it doesn’t happen every single time I have it open, but pretty close. It seems to happen (most of the time) when I click on the “Today” or “Yesterday” (ect) tabs that organize the emails. But again, it doesn’t happen every time I do this – maybe 8 out of 10 times? It also does it when I just open my Outlook screen to look at it before I even do anything, and sometimes it just does it without even touching it. Also, pretty much every time I send an email it opens a couple pages up. It also doesn’t happen just once, it will open sometimes 5 – 10 of the same screen all at once. My IT person at work suggested deleting Firefox to see if it would stop and it didn't, it would just open up a window saying you have no Firefox so download it. I re-installed Firefox and it still does the same thing – mostly – except now it asks if I want to download the file instead of just opening that white Firefox screen. If I click yes it opens the same screen but it will still open sometimes 5 of those asking if I want to download it.

Microsoft published some articles about this error last year. It might not be the only cause, but can you forward it to your IT for consideration?
[http://support.microsoft.com/kb/2559926 "There are no items to show in this view." error message when you try to view a folder by using Outlook in an Exchange Server 2010 environment] (Group by)
[http://support.microsoft.com/kb/2500648 "There are no items to show in this view." error message when you try to view a folder in Outlook in an Exchange Server 2010 environment] (Sort by Categories)
Edit: As a short-term workaround, what happens if you make IE your default browser? You can still use Firefox as your primary browser, but of course links and shortcuts from other applications or the desktop will open in IE.

Abap wp table - there are no items to show in this view

My apologies if I posted this in the wrong section.
I started the system in SAPMMC Console and The ABAP WP Table don´t show any work process list and in Process List section the disp+work.EXE (Dispatcher) IS stopped.
basically the abap WP table says there are no items to show in this view.
as a result, i'm not able to start SAP or log in.

I got the same problem, dispatcher status showing as stopper and remaining two are running in the process list
here is the dev_w0 file. I got dev_w0.old also if you want i will also send. It has been more than a year i started the server. before it used to work.
Thanks in advance
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Jun 15 19:31:21 2012
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno      06
M sid        EC6
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2468
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2468) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)            18304 (1408)
M DpShMCreate: sizeof(tm_adm)            3994272     (19872)
M DpShMCreate: sizeof(wp_ca_adm)         24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064      (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)           0     (1440)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)      48
M DpShMCreate: SHM_DP_ADM_KEY            (addr: 06640040, size: 4653368)
M DpShMCreate: allocated sys_adm at 06640040
M DpShMCreate: allocated wp_adm at 06641E40
M DpShMCreate: allocated tm_adm_list at 066465C0
M DpShMCreate: allocated tm_adm at 066465F0
M DpShMCreate: allocated wp_ca_adm at 06A15890
M DpShMCreate: allocated appc_ca_adm at 06A1B650
M DpShMCreate: allocated comm_adm at 06A1D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06A9E450
M DpShMCreate: allocated gw_adm at 06A9E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06A9E4C0
M DpShMCreate: allocated wall_adm at 06A9E4C8
X
X Fri Jun 15 19:31:22 2012
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 15 19:31:23 2012
M ThInit: running on host visuinfoec6
M
M Fri Jun 15 19:31:24 2012
M calling db_connect ...
C Prepending D:\usr\sap\EC6\DVEBMGS06\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp ErrHp ErrHpBatch
C    0 UTF8 1   06C68BC8   06C6E164 06C6D9EC
C Attaching to DB Server EC6 (con_hdl=0,svchp=06C6D938,svrhp=06C7F204)
C
C Fri Jun 15 19:31:25 2012
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp ErrHp ErrHpBatch
C    0 UTF8 1   06C68BC8   06C6E164 06C6D9EC
C Detaching from DB Server (con_hdl=0,svchp=06C6D938,srvhp=06C7F204)
C Attaching to DB Server EC6 (con_hdl=0,svchp=06C6D938,svrhp=06C7F204)
C
C Fri Jun 15 19:31:26 2012
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    10933]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server visuinfoec6_EC6_06 on host visuinfoec6 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME        Fri Jun 15 19:31:26 2012
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2468) [dpnttool.c   327]
Thanks
Vijaya

How to change the default text "There are no items to show in this view" in the visual webpart

Hi,
I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text.
I checked the forums here there are multiple ways are shown but no one is working for me.
Kindly help me to change this text.
Thanks in advanced.

It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.
Mohamed Derhalli
SharePoint Consultant
Blog: SharePoint Thoughts
Twitter:
LinkedIn:

Captions Not Showing in List View Though They are There

Ever since I've been using Aperture I've had issues with Captions not showing in List View. The caption is there and shows in the Info Panel but does not show in the List View. I close Aperture, reopen, and it appears in List View. Frustrating when trying to caption thousands of images. You think the image has no caption and when you add a caption it doubles up on what is already there, but could not been seen, and a mess is born. Any one else have this issue? I see it in every Library I create whether on my field laptop or my main desktop Library. Screen shot attached of caption showing in Info pane but not in list view.

Happens all the time. The problem has been there for as long as I can remember, and shows itself in Keywords as well as Captions, maybe others. And yes, it is a major annoyance, and it is a bug IMO. You've found the same workaround I have, namely to restart Aperture.
If you haven't already done so, submit a bug report using Aperture Feedback to add your voice to the list.

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
Check all of them.

All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

Hi All,
On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
I hope you can help
Colin

Hi Colin,
As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
Check things below:
1. Go to site content and structure logs in site setting to check if there is correct information.
2. Create a new site collection to check if there are items in Site Content and Structure.
3. Switch another computer to check if it can work.
If the issue still exists, I recommend you to post it in the O365 forum.
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Stereo shows Mono in viewer???

Similar Messages

Maybe you are looking for