STM meta data not defined
Server returning error 1 - meta data not defined
It is not clear to me how to define the meta data used in STM. I have created an array of clusters that contain a string. I have named the clusters. The STM VIs returns an error concerning the meta data not being defined (Figure 1). Figure 2 shows the server code that generates the error and figure 3 show the client code. To start, I am trying to pass a simple string but I would like to pass arrays of data once this is working.
Client and server both running LabVIEW 2012 (32-bit) version on Windows 7.
STM package: stm_1.0.32.zip (not sure this is correct version. Example programs use VIs with different names. Unable to run examples because I don't have the VIs used in the examples.)
Application: Stream data from embedded PC to UI using ethernet connection.
White Papers: LabView Simple Messaging Reference Library (STM)
Command-based Communication Using Simple TCP/IP Messaging
Figure 1 - Error
Figure 2 - Server Diagram
Figure 3 - Client Diagram
Just so you know, there's a board specifically for the STM. That would be a good place to ask for improvements or better clarifications.
http://forums.ni.com/t5/Components/Simple-TCP-Messaging-STM/td-p/583438
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Date not defined in factory calendar
while creating the process order using the t - code COR1, i got error saying that " Date not defined in factory calendar "
i extended the factory calendar in t - code SCAL.
still i am facing the error.
please helpOk Sudhir.
Then the problem is one of the workcenter you are using in Production Order. The Intervals of available capacity are maintained in a work center capacity whose 'To date' is after the expiration date of the factory calendar. The error does not occur if the date is 12/31/9999.
Go to workcenter - Capacity - Interval & shifts
The 'To date' of an interval of available capacity must be maintained so that it is within the validity period of the factory calendar. The exception is the date 12/31/9999, which is allowed.
Regards
Abhijit Gautam -
IDoc meta data not getting imported
Hello
I am trying to get IDoc meta-data using transaction IDX2. I have configued RFC destinations of type R3 in both the systems (ECC and XI). Also I have created port using transaction IDX1.
When tried to import MATMAS04 using the defined port it gives Information box displaying "I::000" and nothing happens. The information box does'nt contain any message.
Anybody faced this problem with IDoc?
Thanks in advance.
Regards
RajeevHi,
actually it was authorization problem which I noticed when I checked the short dump in ECC.
anyways thanks for the reply.
Regards
Rajeev -
Meta data not included upon export - Please confirm
Hello everyone. I'm looking to confirm with several people the following:
After updating to the most recent version of Aperture and Tiger (Leopard is not tame enough yet), exported images do not include meta data (yes, I know how to click the little box that says include meta data so please understand in advance that isn't the solution).
I'm looking for several people to confirm this is happening to them too. Kinda a bummer to have done all the key-wording & meta data work only to have exported images void of anything. Previous version of Aperture exported meta data just fine: I have one folder here full of images I just processed (no meta data) and one folder full of images processed 7 weeks ago (has meta data).
Thoughts?
Thanks in advance,
Christopher DavidYour problem and description gave me the first clue about the little box that needs to be checked, but where to find that little box. I'm adding my resolution here because your title most closely matched my problem. Maybe someone searching in the future needs to know how to find the box to check and won't have to search any farther with this explanation. I hope you've solved your problem too.
I searched and posted in several forums before calling Apple Support today. I've discovered the problem with that tech person's guidance. If anyone else faces this dilemma, check your settings here:
Aperture > File > Export Versions
Then you get a pop up box with some drop down menus. The top drop down box has 'Edit' at the bottom of its list. Go into there. You'll have several preferences to choose from (file type, dimensions, quality, etc) and there's a tiny box that accidently got unchecked which says something like: Include Metadata.
I can't check it for exact wording because I'm merrily re-exporting right now - Metadata intact!
Apparently there's an even quicker path to fix this:
Aperture > Presets > Image Export
I can't check this either because exporting doesn't go to the background and I have a bunch of photos to resend now that it's working OK! -
Meta Data Not Syncing Across Machines
Some changes made on one computer are not being propagated to other machines. Has anyone experienced this? The information appears to have been propagated to the iTunes Match servers as I can see it on my iPhone but it isn't making it to my other machines.
Apparently it helps immensely to have all computers connected to the internet when making changes to meta data. I had made some changes to my catalog at work today. When I came home they were not getting propagated to my home machine. When I remotely logged into my computer at work some of the changes I had made there were undone on the work machine. When I then made changes with both machines connected to the internet the changes propagated immediately. This seems like a pretty serious design flaw for an "in the cloud" system.
-
Contact sheets-meta data not printing
On contact sheets the meta data I choose to print (Apsect Ratio, Master Pixel Size, etc etc) only prints the begining of each line, and ends with an"..." For example I get "File Size 9..." or "Pixel Size 2048 x 225..."
This happens despite the amount of rows, columns and print size of the images.
I need to see the full data on my proof prints and contact sheets.
Any ideas why it's not printing complete meta content?
Thanks
bcI'm running a test wtih Arial. Pretty simple right? In the OS print preview I can see the full meta data, but when printed it's still cutting off Meta Data...Here's a sample of what I'm getting. I can't figure out Aperture's preference with what it will print and what it will ....
-
FSDB File Meta Data not accurate
I have some folders on an FSDB (Windows NT Share). When I view the files, the modified date is correct. If I view the documents via the portal, the modified date is older than the date shown via Windows explorer. If I click the action Icon and select details, the information is the same as the Window share. Once I close that window, the portal refreshes and now the date is updated.
Please view this <a href="http://www.rquackenboss.com/SharedFiles/File_modifiedDate.png">Screenshot</a> for a better description of what I am talking about.
Can someone explain how / why the two dates are not in sinc?
Thanks,
QuackSorry Frank...
I found it!!!!
Content Admin->KM Content->Toolbox->Reports->User Related Cleanup->CM Repository: FS-DB Database Synchronization
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/83d1f7229c5965e10000000a422035/frameset.htm">SAP Help</a>
I should have looked first.
Thanks for the heads-up.
Quack
Message was edited by: Ryan
Added link to SAP help
Ryan Quackenboss -
Hi,
I am using OBIEE 11. I have created an ODBC to a SQL database. I have created a new BI repository in the BI admin tool and chose the odbc as the data source. I selected all metadata types. When I click on the finish the database is in the physical layer but I cannot expand the nodes and no tables or views are present.
My colleague tried using a different data source the other day and he couldn't get the meata data in either.
Please advise.
NathanHi Nathan
I have created an ODBC to a SQL databaseI assume you mean you've created a system DSN pointing to a MS SQL Server database.
Did you try to test the DSN when creating it? You need to be sure it works. Also log in directly to the database with the same credentials to prove that you have the correct grants to see the various objects you want to import.
Within the Import Metadata wizard you need to expand the objects in the middle pane and click the right-pointing arrows to get them to move across to the right pane, then click 'Finish'. Your repository physical layer should then show a new database, connection pool, catalog, schema and tables.
Hope that helps
Paul -
Web Galleries Meta Data Not Updating
Hi,
I have a gallery up and went and changed it so the Title and the Caption would show.
I then updated the Pictures Title and uploaded to the web. The New Titles and Captions didn't show, only the original ones.
I then did a search on files created today and found where LR was creating the gallery. On my Mac it was: Macintosh HD:private:var:folders:ja:jaqz63pZEjWherT-rFYZJU+++TI
So I deleted that, re-uploaded and it worked. Is there a way to force LR to over right it's cache?
TIA
RichI don't think that is it now that we are into Monday and it still hasn't updated. Anybody else having issues with their text descriptino not updating? What's a good email address to contact apple about the problem. Non of the "contact Us" email addresses seem to fit the description. The [email protected] is a blackhole.
-
Problem with file meta data in Toast
From a reply to my previous question, I learned that meta data in the file information window cannot be edited. Actually, I really want to get rid of this meta data (not just hide it), because in some cases it disturbs certain operations.
Assume the following situation: I have a file named "my song.aif", which I want to burn on CD using Toast. So I open Toast and shift the file with a mouse action into the Toast window. I expect the title of the track to be "my song", but the name of the track unexpectedly changes to say "Title 2". Checking the file information window of "my song.aif" I see that the extra information contains "Title: Title 2" (which possibly was added by itunes). Files without meta data like this retain their names in the above operation.
Since I would like to avoid editing the titles in the Toast window, I would appreciate hints on the problem.You can't directly edit the metadata, but the application that created it obviously can, so it depends on the particular application. In this case, editing the song information in iTunes changes the metadata. Usually the song title is the same as the song name, but Toast might be looking at something like the ID3 tags. The ID3 tags are stored in the .mp3 file itself and not the metadata database - I am not sure what iTunes does with the ID3 tags (or what Toast is looking for), but you might try converting the tags.
-
OBIEE 11g Map Visualization Error - basemap is defined in spatial meta-data
Hi All,
I have installed OBIEE 11g successfully on my Desktop Machine, deployed the Sample Applications regarding Mapviewer and its working fine. I have seen all the Maps and they are running fine in fact they are editable and i can easily do anything with those Maps but,
The issue is that when i am going to create a new Report and try to integrate Map on it then it shows an error as display below;
A basemap is required to render a map. Please ensure that atleast one basemap is defined in the spatial meta-data
Error Details
Error Codes: EMGUNIA3
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool,
saw.threadpool, saw.threads
I have also followed this link ( http://erpthings.blogspot.com/2011/01/obiee-11g-inbuilt-mapping-and-spatial.html ) but it is also stuck on the same error at the end.
I didn't understand the problem why its giving an error like this while the Sample Application worked fine so, if there is any way to define a basemap in spatial meta-data plz guide me OR
Is there any way to integrate Map with OBIEE 11g ?
Cheers,
Masood.This question has been solved!
Basically you need to ensure the database schema where the data source (Navteq) has been imported must have the privilege "Create Type"
This comes from the Oracle manual extract as shown below:
1.4.4.3 Creating MapViewer Array Types, if Necessary
For each database schema that it connects to, MapViewer checks for the existence of
the following SQL array types that support array-type binding variables that might
exist in some predefined themes:
■ MV_STRINGLIST
■ MV_NUMBERLIST
■ MV_DATELIST
If these types do not exist, MapViewer attempts to create them in the database schema
associated with the MapViewer data source. However, if the user associated with that
schema does not have sufficient privileges to create new types, a privileged user must
create the types by connecting to the data source schema and entering the following
statements:
CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
CREATE or REPLACE type MV_DATELIST as TABLE of DATE;
Cheers. -
Loading IDOC meta data into Xi not working
Hello,
I'm trying to load IDOC meta data using trx IDX2 but the program is not able to recognize the port "SAPRD1_222" I previously defined in trx IDX1.
Any ideas, what Im missing here?
RuudRuud,
Pls take a look of this thread:
Re: Importing Metadate from IDES 4.7 into Integration Server Rep -
Can not get PK-FK in meta-Data of MySql....Help me pls.
Hello Every one.
I can not to get the PK and FK from Meta-Data Database of mysql-4.1.1a-alpha. Anyway I tried to do the
followihg
1. OS windows 2000 Pro.
2. set configuration Script support InnoDB Table Type as the follow in my.ini file.
[mysqld-nt]
innodb_data_home_dir = C:\mysql\data
innodb_data_file_path =\ibdata\ibdata1:2000M // in folder \data\ i was created folder ibdata
3. I try to create data as reference in example java code and table :persons , shirt as the example in
Create innodb table Type of mysql doc.
4. the code test as following
In the test code i can get the result only from method : getPrimarykey(...); only and the other method ,getExportedKeys, getImportedKey , getCrossReference the result in ResultSet is null.
anyway, this code i can apply in the oracle db with change db driver .
I wish the answer why? and the actually the second parameter of this parameter , as refer scheme name , the scheme name is ?
Thank you
import java.sql.*;
public class testMeta {
public testMeta() {
ResultSet rs=null;
String url = "jdbc:mysql://localhost:3306/testinnodb";
Connection con = null;
try{
Class.forName("org.gjt.mm.mysql.Driver");
}catch(ClassNotFoundException ex){
System.out.println(ex.getMessage());
try{
con = DriverManager.getConnection(url,"root","rootpwd");
prtS("getConnection complete");
DatabaseMetaData metaData = con.getMetaData();
Connection con2 = metaData.getConnection();
String type[] = new String[1];
type[0] = new String();
prtS("*************** GET Schemas ***************");
rs = metaData.getSchemas();
while(rs.next()){
System.out.println("12345");
prtS("TABLE_CAT" + " : " + rs.getString(0));
prtS("TABLE_CAT" + " : " + rs.getString("TABLE_SCHEM "));
rs=null;
prtS("*************** GET PRIMARY KEYS ***************");
rs = metaData.getPrimaryKeys(con.getCatalog(),null,"persons");
while(rs.next()){
prtS("TABLE_CAT" + " : " + rs.getString("TABLE_CAT"));
prtS("TABLE_SCHEM" + " : " + rs.getString("TABLE_SCHEM"));
prtS("TABLE_NAME" + " : " + rs.getString("TABLE_NAME"));
prtS("COLUMN_NAME" + " : " + rs.getString("COLUMN_NAME"));
prtS("KEY_SEQ" + " : " + rs.getString("KEY_SEQ"));
prtS("PK_NAME" + " : " + rs.getString("PK_NAME"));
rs=null;
prtS("*************** GET Exported KEYS ***************");
rs = metaData.getExportedKeys(con.getCatalog(),null,"shirt");
while(rs.next()){
prtS("FKCOLUMN_NAME" + " : " + rs.getString("FKCOLUMN_NAME"));
rs=null;
prtS("*************** GET Imported KEYS ***************");
rs = metaData.getImportedKeys(con.getCatalog(),null,"persons");
while(rs.next()){
prtS("PKTABLE_CAT" + " : " + rs.getString("PKTABLE_CAT"));
rs=null;
prtS("*************** GET CrossReference ***************");
rs = metaData.getCrossReference(con.getCatalog(),null,"persons",con.getCatalog(),null,"shirts");
while(rs.next()){
prtS("PKTABLE_CAT" + " : " + rs.getString("PKTABLE_CAT"));
}catch(SQLException ex){
prtS(ex.getMessage());How i know the jdbc driver not compatible to this
mechanismBy reading the documentation tthat comes with your driver. Recent versions of the MySQL JDBC driver do support the getExportedKeys/ImportegKeys methods but the table needs to be crated as InnoDB.
So run the SQL command
show table statusWhats under the Type column for your table? If it isn't InnoDB then this isn't going to work.
If it is InnoDB but getExportedKeys/ImportegKeys still don't work then you haven't used the "foreign key" constraint in your "create table" command -
Data Source Z*** is not defined in the source system
Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny -
Meta data (song information) not updating in mini player for radio stream
I notice in the mini player view, the meta data does not update for radio streams. This is a big deal for me because I listen to radio stations all the time, and I don't want to have to switch between the mini player and full player to see the song information. This wasn't an issue in iTunes 10 (and previous versions as I recall), where I could just click to toggle between the name of the station and the meta information.
I understand your concerns, but regarding the headphone jack, this is standard procedure. While you may have checked these things, and know more about the player, a lot of people will not check the basic things before contacting support. The Advisors have to check these things with you first to make sure they've been checked.
As far as transferring data goes, it is true that unfortunately we cannot transfer data over for you or make a back-up. Doing this for all the returns for different players would require a lot of resources, time and money, making the RMA process a lot longer for everyone. In some cases, it's even necessary to replace the harddri've or the whole player.
Cat
Maybe you are looking for
-
Can I download two different itunes accts on the same computer
Can I downloan two different Itunes accounts on the same computer under different users??? I have 3 Iphones and they don't want to share an itunes acct.
-
I am getting the same message when I try to log in thru www.comcast.net on Safari, the Comcast Xfinity app and adding Comcast to my email accounts. I've also turned the phone on and off with no good results. My husband had the same problem and finall
-
Hi at all is there solution for to set margin programmatically ? i'm crazing Default margin are 9.8mm, instead i want 3mm can i ? thank you very much
-
RE:Exception in thread "main" java.lang.NoClassDefFoundError:
Hello all! I'm trying to connect to a 10g Oracle DB (10.2.0.1.0) from Java code using jdbc. however i get the error below when i try to run the following code in Eclipse. could you please help me out here. Thnx so much in advance. import java.sql.*;
-
Here is my problem, I have slides that at 720x480px at 150dpi that I import into DVDSP. When I create slideshows, the images are "Squished" when I view them with the Simulator. I have the viewer set to 4:3 letterbox. I don't understand! My slides loo