Stop BDC at warning message T-Code CO11N

Hi Team,
I have a requirement of capturing time event for production orders from WebDynpro ABAP through BDC for T-Code CO11N i am able to do this, but in standard t-code CO11N when we try to change the yield quantity we are getting a popup at the time when we hit save which asks for warning error details like yes/no
if we hit yes then it navigates to detailed warning message screen and asks for save confirm once again by to continue. due to cost changes.
but when i record through BDC i am not getting the warning message popup instead of that it's appearing as normal warning message at below of the screen.
When i try to run the BDC in N screen mode the transaction is getting saved with warning.
now my requirement is how the standard screen behaves if warning is there then it should ask for the confirmation.
please help to full fill this requirement.
Thanks & Regards,
Srinivasan R.

Hi Srinivas
Normally if a message of type warning is thrown no pop up comes. But sometime the screen is coded in such a way that after giving warning it will show you a pop up message. You will have to code it in your BDC if pop up will come or not
Nabheet

Similar Messages

How to remove the warning messages in CODE INSPECTOR of my report......?

Hi All,
I am trying to do the check to my program i.e CODE INSPECTOR. i am seeing the following warning messages below.
1 warning message
Program zraj0xxx include zraj0xxx row 000083 Column0000
%LINR-VBUP contains a hyphen
(The Hyphen is used as a dereferencing operator! )
Note: when i double click on the above message its taking me to the below code of my program.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
2 warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
Note: when i double click on the above message its taking me to the below code of my program.
SELECTION-SCREEN: BEGIN OF BLOCK PROG
                           WITH FRAME TITLE TEXT-F58.
TABLES: VLPMA,
              VLKPA.
TABLES VBUP.
3 warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
Note: when i double click on the above message its taking me to the below code of my program.
REPORT ZHYD0147 LINE-SIZE 255 NO STANDARD PAGE HEADING
   MESSAGE-ID ZB
   LINE-COUNT 065(001).
Thanks in advance.
Rajesh.

Hi Rajesh,
First warning message.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
Here you are not supposed to use hyphen but instead use '_'.
Second warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
That means you are not using this VLPMA any where in your program so bettr delete fromt he Top Include.
Note: when i double click on the above message its taking me to the below code of my program.
Third warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
this also means that you are not using this Text elemnt anywhere of your program.So delete this one also.
Thanks
Rohini.

S4 mini camera stopped working gives warning message "camera failed".

S4 mini keeps giving me a warning message "camera failed". I have rebooted several times and it still won't work anyway to fix this?

shilo1109
Sorry to hear about the unexpected error with your camera! Let's work on getting this resolved for you today. Have you been able to clear the cache on your camera app? You can do this by going to Menu>Settings>Applications Manager>All tab>Camera. Then, tap Force Stop, Clear Data, and reboot your phone.
RuthW_VZW
Follow us on twitter @VZWSupport

How to stop HTTP Security warning message in transactional iview

When I am trying to access ECC through transactional iview then I am getting HTTP security warning message i.e. This page contains both secure and nonsecure items. Do you want to display the nonsecure items?
I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
Pl help to resolve.

Hi AshuGrover_in,
First, welcome on SDN!
> I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
> Pl help to resolve.
This might very well be the root cause of the issue, and if it is, you know the resolution - make all systems accessible via https.
Anyhow, to examine the exact cause creating this message you could use tools like HttpWatch or something similar and record the client accesses to the server. If you originally have a GET to a https address, the first http request caused by the original request will throw this message.
Theoretically, on client side, you can switch off this message: Search for "switch off http https warning" on google and you will get all possible instructions for the different clients. Anyhow, a clean landscape design with complete https connections is the aim you should have.
Hope it helps
Detlev
PS: On SDN, if something helps, you might reward the answer, check it out.

Stop the server warning message

How do I get itunes to recognize their own server? I keep getting warning messages like this - iTunes cannot verify the server "bookkeeper.itunes.apple.com”?

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Category list, select Certificates. Is there a certificate with "VeriSign" in the name?

How to surpass warning message

Hi experts,
In my RFC FM, when calling function '/ADP/SD_DOCMENT_CREATE', it gets warning message 'Sales Price Warning ...' and is asked to choose Yes/No to continue. The problem is my FM is called remotely so it cannot be stopped by any warning message. How can I surpass warning message when I call such function module?
Thanks.
Yu

Hi Yu,
Please check include programs LCK00F01 and LCKEKMLCU04 for sample codes.
CALL FUNCTION 'CM_F_SUPPRESS_MESSAGE'
    EXPORTING
      aplid            = 'PPCO'
      arbgb            = 'BS'
      msgnr            = '011'
    EXCEPTIONS
      NOT_ACTIVE       = 0.
Regards,
Ferry Lianto

How to handle warning message for the fields in tab merging , PERSONAS 2.0

Hi all,
Please advice me on the below issue.
In a transaction VA32 , I have merged the fields from one tab to another tab using tab caching.
when i try to change the value of a merged fields , it throws the warnings message. So it is continuously looping from one tab to another tab.
So i tried to use the additional editor concepts in tab caching as below.
Looping is stopped and throws warning message in the same tab.
All the changes are saved successfully only when the enter button is clicked once in the main screen, else the changes are not saved and my previous value remains.
Anybody have an idea on how we can use Additional actions in Tab caching concepts.
Thank you,
Arun

Hi Kranthi,
When i try to save the fields which i merged from different tab is not saving.
Please find the below details.
Green highlighted fields are custom fields which is merged from different screen like header or item overview screen. This is handled in script button.
Red highlighted fields are merged from different tab like shipping or sales using tab caching concept.
While changing the value of the fields which is merged from different tab , and press ENTER then it throws the Warning message if occurs.
After warning message, if i try to save using the script button for copying all the custom fields which is merged from different screen , pasted it to their respective screens and also saved.
Its working fine.
When i try to save it before pressing ENTER button then the respective changes had made in the merged fields from different tab are not reflected.
How we can handle this issue?
Thank you,
Arun

Capturing warning message in BDC recording

Hi all,
I want to capture a warning message that is getting popped during BDC recording. When BDC is ran in background, it is stopping at that point and further processing is stopped with the display of this warning message.
Can anybody help me in capturing this warning message?
Thanksm
Archana

Hi Avinash,
I am trying to change the profit center using this BDC. So, when i change it, this warning is displayed and it goes inside one more window and coreects the new profit center added in the previous window. So, this warning message is necessary to be displayed. But my problem is that because of this message my BDC is also not proceeding further.
Hi Bhavesh,
The warning message is getting displayed as a pop-up. I am not getting any information about the screen number. I know the prgram for that but no the screen number. And can you please tell me what that piece of code does? So that i can try it out in my BDC.
Thanks,
Archana

How to supress a warning message in BDC for ME11 Tcode

Hi Expert,
I am doing a BDC report for ME11 Tcode and some of warning is ignorable for this transaction code,how can we suppress these warning through BDC program, is it possible or will have to make some changes changes in TCODE(ME11) itself.

hi,
if the warning message coming in a pop-up window then it can be supressed in the following way.
1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code '=ENTE".
2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
call transcation 'ME11'
using bdcdata
options from opt ( structure of ctu_params )
3. At the time of recording use the option of check box " no batch input session ".
regards,
Alok

Handling a warning message in BDC through RFC

Hi all,
I have a requirement where I have to do a CALL TRANSACTION using a RFC Fn. Module.
This is for sending time sheet data to CATSDB thru CAT2 (T-code). In the process of time entry I have to go through a warning message (time entry for saturday & sunday ) and save the time sheet. I have recorded all this thru SHDB and created the BDC. The FM works fine in the back end. It is also fine when this RFC is called in the front end from a portal, except for the warning message part. The FM errors out when called thru portal for uploading data for saturday or sunday.
There seems to be no problem when I call this function module in the backend using a custom program and try to save time for saturday and sunday. I have tried various options and founnd that the RFC is failing only when called for saturday and sunday. Somehow the BDC part where the warning message is handled is causing the error.
One of my colleague said, the backend is trying to return a dialog box/screen (warning message pop up) to the fucntion module which is not being accomodated or something of that sort????
Is this true??? So does this mean I cannot do it the way I am trying to.
Any suggestions and thoughts on why this is happening. Am I missing something here???
Any kind of input is highly appreciated.
Thanks
M
Edited by: Mark Mark on Aug 26, 2008 5:45 AM
Edited by: Mark Mark on Aug 26, 2008 6:07 AM

Hi Anees, Thanks for your suggestion.
I was probably not very clear in stating my problem. I do not have to display the error or warning message.
During time entry,when I click SAVE button, I get a warning message, to get through this message I have to hit ENTER again (now the time sheet is saved). All this I have recorded in SHDB and used in the BDC.
Now my problem is this BDC for saturday & sunday (the warning message comes up for these days) does not work when the RFC is called from the portal, whereas the time sheet is saved without any errors when I try to call this from the back end.
Also the RFC works fine for the rest of the days both in the back end and also when called from the portal.
I hope I am clear.....
Any suggestions
Thanks
M

FV50-Park a G/L Account Document BDC Warning message in screen 1001

I need some help with a BDC program. I am working on a BDC program to process transaction FV50. I went to SHDB and created a recording macro. When I test the recording with u201Csimpleu201D information the recording works correctly and the document is parked. But, when I try to park a document with todays date for the Document Date and I use a date from a previous period I get a warning message which requires an extra screen to be displayed and u201Centeru201D has to pressed. My recording does not work when I get a warning message. I went back and re-recorded transaction FV50 and cause the u201Cwarningu201D message to be displayed so that I can add the extra screen to my BDC recording. I do not see the u201Cextrau201D screen in the new BDC recording. Anyone know why? How can I make this BDC program handle this extra warning message?

You will have to add some logic to your program to check the date. If it is from the previous period, process the warning screen; otherwise, do not.
You may run into other problems as well. FV50 looks like an EnjoySAP transaction and not well suited to batch input.
Rob

Disable warning message in MB1A during BDC

Hi,
I am posting the goods issue records into SAP through MB1A in BDC. However the warning message finally becomes the return message of the BDC call and the action is failed. Actually it can be skipped by doing the transaction manually.
Any solution can be used to disable the warning?
Thanks.
Angus.

that error is comming for ur Config, So u cannt Skip that message from BAPI returns, try to change CostCenter or Docuent Type.
regards
Prabhu

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled new

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled the newest and one older version of itunes. still nothing. I tried to delete some files that is hidden as directed by apple. I have been trading emails with customer support but it has been no help at all. I am running Windows XP. Before i wiped my computer I ran itunes with no problem, on this computer, this week.

WOOOOOOOOOOOO!!!! JUST WANTED TO UPDATE Y'ALL THAT BY SOME STROKE OF HEAVENLY GLORY, ITUNES DECIDED TO WORK AGAIN!!!
WOOOOOOOOOOOOOO!!!
How did I do it you ask??
after all the stuff I updated you about, I tried one last time to install....still didn't work...so once again I wiped my system of everything itunes and apple related
well today I was trying to watch a video that required me to get the quicktime plug in, and it too me to a page that was a quicktime install + itunes 7.blah blah blah instead of the other way around
well, don't ask me why, but low and behold
IT WORKS!!!!
I HAVE MY ITUNES BACK!!! (JUMPS FOR JOY)
Just wanted to share my shear elation

Execute Custom code to do a warning message on SSHR Manager Appraisal form

Hello - I do not know much about Java/OAF, but I'm really trying to learn! Here is my requirement,
please help me in getting this done.
Requirement : On Employee appraisal form, they will have their yearly objectives and their weight percentages.
These objectives weight percentage is in per_appraisal table attribute1 field(DFF).
The total weight percentage of an employess all objectives should be equal 100.
When manager will login to give them a final rating, the total of all weights percentages should be equal to 100,
if not I have to through a warning message on the Manager's appraisal form(CompFinalRatingsCO).
To calculate the total weight, we can certainly write a small pl/sql function or a procedure.
But how can I execute that code and show a warning message on SelfService HR Manager Appraisal form?
Thanks in advance for your help.
Thanks
- Srini

1) extend the CO attached to your page.
2) Capture the Button in Processformrequest of your extended CO.
3) Call a plsql function or procedure with OUT param which will return whether 100% weightage has been entered or not.
If Not, then throw warning message.
Here is the way to call Plsql proc with OUT param.
String sql =
"BEGIN bcr12_mapping_tool_procs_pkg.XXBCR12_HAS_MANDATORY(:1,:2); END;";
OracleCallableStatement cs =
(OracleCallableStatement)am.getOADBTransaction().createCallableStatement(sql,
1);
try {
cs.registerOutParameter(2, 1, 0, 2000);
cs.setString(1, int_name);
cs.execute();
String new_status = cs.getString(2);
cs.close();
if ("Y".equals(new_status.trim())) {
throw new OAException("Please enter all mandatory column highlighted.",
(byte)0);
} catch (Exception ex) {
throw new OAException(ex.getMessage());
}

Warning message in BDC

Hello ,
While uploading the data using CALL TRANSACTION method if system returns some warning message will it causes failure of the update or it will update the data.
What are the BDC message type's other than E,X,A which indicates failure of the call transaction method.
Thanks for your help.
Regards,
Sarada

You can just go ahead by pressing ENTER if its a Warning Message
Regards
Gopi

Stop BDC at warning message T-Code CO11N

Similar Messages

Maybe you are looking for