Stop button to Main menu

Ok this is probably gonna have a simple solution, but I have a relatively simple DVD project for my mates band - one main menu with 2 buttons linking to a film each and a 3rd button linking to a menu containing 10 buttons that each link to an audio only track. Everything is working good but the only thing that I would like to happen is when one of the films is being played and the 'stop' button is pressed on the DVD remote at any point throughout the film, I'd like it to return to the main menu. I already have the 'end jump' on both films set to the main menu. Sounds simple but I can't figure this one out!
Oh yeah DVDSP3
Thanks
Simon

You cant program the stop button - maybe in higher end systems. the stop button does just that - stop the disc from playing.

Similar Messages

IPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu

iPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu, can't send texts, emails, check internet etc.,

Hold down the home and power buttons until the Apple logo appears(about 15 seconds). It should then restart.

Sleep button on main menu does not always work..

For my own convenience, I added the "sleep" selection to my iPod's main menu, so I wouldn't have to worry about holding down the play/pause button instead. Quite often, this button simply doesn't work in putting the iPod to sleep. Holding the play/pause button works, but clicking sleep seems to do nothing half the time. The iPod realises that it's being clicked, since it makes the "click" noise from the speaker.. yet nothing happens. Is this some sort of wierd bug? And if so, why does the sleep option work some times and not others?

I usually give mine at least 15 sec and mine works perfectly.If i dont wait for it to spin down it will not cut off.try it.......

Sync Drop zone w buttons in Main menu

I created buttons for different tracks and a drop zone in my main menu. I can only have a track in that drop zone looping. I want to have the particular track display on my drop zone when ever my arrow selects that particular button on my main menu, so I will know this button has what video content. Is it possible to do that?

Just to make sure we are on the same page, if you look at
http://www.dvdstepbystep.com/1.jpg and you want to scroll down the buttons on the left so the area in the black square to the right shows a different video (not still) you would need different menus. If that black area is just a still, then you can use layered menus.
If you want to hide/reveal little clips to the right of the button for instance, http://www.dvdstepbystep.com/2.jpg, then you would put the movie clips in the background of the menu and hide/reveal the section of the background

I need the 'STOP' button on the menu

I just upgraded to FireFox 9.1 and I lost the 'STOP' button. Could you please let me know how to get it back.
Thanks

'''synergytax''', The Stop and Reload buttons as said above may likely be on far right end of your Location (address) bar. With the Customize window open you can move the Stop and reload buttons to almost anywhere you want.
If you want them side by side after moving them and not combine. Either place them as Stop then reload or if Reload the Stop place something in between like a flexible space to keep them from combing.

How to make a common RUN/STOP Button

Hi,
Does anyone has an example to make common START/STOP Button in main VI.
Thanks,
Kishor
[email protected]

I'm not sure what you are trying to achieve; do you want the start/stop button to pause the sequence and then commence where it was if start is pressed again?
Using the state machine you can still force the execution order but have more control; you can stop the sequence whenever you want, skip frames based on user input or other...and you can have a single start/stop button.
Attached is an example.
MTO
Attachments:
Stoppable_sequence.vi ‏70 KB

Animation keeps running through. I want it to stop on main menu so i can click buttons

animation keeps running through. I want it to stop on main menu so i can click buttons which navigate to different scenes. Please help I am a noob.
here are screen shots of what i have going on:
Main time line "home" menu
script in frame 1
script in frame 48
scene 2 animation of shape tween which isnt supposed to run all the way through past the home page. I want it to animate but only after i click the button to do so.
script for this scene
scene 3 which is causing all the issues i think? supposed to be able to drag boxes. but it just runs through without stopping when i play it.
here is the compiler errors:

If you removed the stop() from scene 2 it will not stop there it will return to wherever "home" is.
If you intend to have the timeline stop at some frame, then you need to place a stop() command in that frame, or use a gotoAndStop() command.
If you are going to use scenes be consistent with the way you write the goto commands. The use of is rarely recommended - instead, use different sections of the timeline of just one scene, or use movieclips and control their visibility, or a combination of both.
If you continue to have issues, try simplifying first - build/add the navigation for one section at a time instead of trying to get it all in one shot.

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

Stop to Main Menu?

Would love it if someone could explain to me how to get the action of hitting the stop button to take you back to the main menu (menu 1) instead of taking you out of the disk altogether or taking you to the jacket picture. Does that make sense?
Cheers, MJ

Hi Miranda - welcome to the discussions!
You're finding out that the remote control buttons are not all programmable in the way you would want. The stop button is a case in point - it is defined as the button to stop playback completely and will only ever stop the disc. Instead of using 'Stop' you need to get used to using the 'menu' button or the 'Title' button to get you to a menu.
The menu button is used when playing a track to take you to whatever menu you wish within your disc structure (depending on which track you are in), but pressing it a second time will resume playback of the last track that played, from the point you left it. If you weren't in a track the menu button will not move you out of the menu, and will probably do nothing.
The Title button can be used to access the first menu (the Title) menu of your disc from wherever, but you can also program it to go to any menu when it is pressed. You can only define one menu as the Title menu for the disc.
So - time to learn about what the buttons on the remote are set up to do, and un-learn all you knew about stop buttons!

When I stop a movie, it doesn't go back to the main menu.

I am experiencing a very frustrating situation.
I have burned a DVD with 2 short movies on it.
When I play either of them all the way through, after they're over, it returns automatically to the main menu, which is what I want.
However, when I STOP either of them anywhere during the playing, it does NOT return to the main menu. It just stays on a black screen.
This situation happens on my Mac DVD Player, and also on external DVD players connected to a TV.
Let's say I am watching the 1st movie, I don't like it and I want to watch the 2nd one on the same DVD. I logically press STOP, but it doesn't bring me back to the main menu. If I press "Menu" or "title", it doesn't work either.
Is there something on the "Map function" window that I should do?
If not, is there any other solution?
Many thanks in advance for any help.

Ok, don't press STOP, just press "menu" or "title" without pressing stop.
BTW, I tested both a commercial DVD (Indiana Jones and the Last Crusade) and and a iDVD disk in my Panosonic player and on my Mac with the Apple DVD player.
On the Panosonic Player: If I press Stop on either DVD, I go to a blank screen. If I press menu once and wait a sec or two, both DVDs go back to the main menu.
On the Apple DVD player: If I press Stop on either DVD, I go to a blank screen, and pressing "menu" gives me the "not permitted" warning for both DVDs.....
So It seems like fro me, iDVD works just like the commercial DVD on both the Mac and the DVD player.....
John B

To display main menu in Safari on iPad Air, I have to double-click on the button.

Put up my new Muse website and it works well in all the browsers I tested on my PC. However, when I tap on a main menu button while in Safari on my iPad Air, all that happens is that the sub-menus display. I have to tap the main menu button again if I want the main menu page to display. This is not true of a website I built in Joomla. There, a single tap takes me to the page. Is this a bug? If so, is there a fix?

1. Settings>Safari>Clear History, Cookies and Data
2. Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Back button returns to the movie, not the main menu

I created an iDVD with a main menu of three options: 1) Video, 2) Photo with audio track, and 3) Photo with audio track.
When I watch the video option and hit the "back" button, I return to the main menu. Perfect. But when I'm in either of the Photo/Audio pages and hit "back", I return not to the main me menu (which is what I want), but to the video.
Why is this happening and how do I correct it? Thanks!

I am a bit confused. When you say the "back" button, do you instead mean the "Menu" button?
Normally the back button would jump you back to the last chapter. If there are no chapters in your movie, then the back button would just back to the default first chapter at 0:00. In other words, back button should restart the movie from the beginning.
Patrick

Remote Menu button: to the chapter menu or the main menu?

Using DVD Pro (version 4.2.1) for the first time, and I've discovered a lot of fun elements. Here is a question about the remote control settings.
I want people to be able to return to the +main menu+ if they want while playing the track, by pressing 'menu' (and I've found the resume feature, too). However, the track has chapters, which are assigned to 3 chapter menus. So, when they are playing a particular chapter, i want them to be able to return from it to the +chapter menu+ it came from, by pressing the 'menu' button.
However, this doesn't work: when playing the video track, pressing the 'menu' button takes me to the chapter menu assigned to that particular chapter, not the main menu that I assigned to the track.
Well, I see in the handbook that the marker remote setting takes precedence over the track setting ... so which would you find preferable:
1. when the viewer is playing the video, the menu button: goes back to the main menu.... then when the viewer is watching a particular chapter, pressing 'menu' also goes back to the main menu, instead of the chapter menu, so viewer has to navigate back into the 'scenes' menu
or
2 when watching the whole video, pressing 'menu' takes the viewer to the chapter menu and then has to 'up' to the Main menu.... and therefore when watching a chapter only, 'menu' button returns to the particular chapter's menu, which is fine.
I thought I would have the 'menu' button return to the chapter menu:: up button for faster/easier access to the main menu, for viewers just watching the video, and convenience for viewers watching a chapter.
What is the more experienced opinion?
thank you
Elizabeth

Hal MacLean wrote:... 'Stories'. If you are playing the track from your main menu, then the menu call for the track should take you back to the main menu. If you are on a chapter menu and start playback then instead of going to the chapter marker, go to a story that contains the chapter marker instead. The story can also have a menu call and end jump set.
Ahh!
The thing is, if you start a chapter playing, do you want the footage to continue to the end of the track, ....
Yes, that's exactly what i want, and as above, for the chapter in the chapter menu to return to that chapter menu
If the former, put all of your markers into a single story and set the menu call to go back to the chapter menu.
Thank you!
I had already created stories from the second track on the dvd, with each one having an end jump back to the story menu and as no one had replied to this post, i had decided to make the chapters in the main track into stories too, but wanted them to continue into the next chapter. In fact i'd already created these 11 stories, some with 2 chapters in them, when I read your post.
So i did as you said and put all the chapter markers into one story, with no end jump for the chapters, but a menu call from the story to the 'chapter' menu instead of the main menu. Much cleaner than the way i had started to do.
And it works just the way i want it to : track's menu call is to the main menu, 'chapter' menu calls are to the chapter menu. Thank you so much!
Elizabeth

Having trouble creating an On/Off button for the subtitles on the main menu

Hello!
I'm creating a DVD with one subtitle track that I'd like to be ON by default but I want users to have the ability to turn them off without the use of the remote. I was thinking of creating a Subtitle on/off button but can't seem to get this to work even though I've read several tutorials. Do I need to create a separate 'set-up' menu with a 'subtitles on' and 'subtitles off' button?
As of right now I have a single button on the main menu that says 'Subtitles On' which I was planning to be dark blue when active (on) and light blue when inactive (off). See what I'm talking about here: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.26.47-PM.png
See also: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.33.48-PM.png
Any help/suggestions/advice would be much appreciated! Thanks in advance!
N

If I have two buttons, one for Subtitles on and one for Subtitles off, how do I make it so that the one that is chosen is highlighted?
You set it by changing the menu's property for the default button. This is one of the reasons a separate menu is generally used. If you have a single menu with 3 buttons ("play movie," "subtitle on," and "subtitle off"), and you set the default to "Active Subtitle Track," then your "play movie" button won't ever be the default.
To play with this and to decide how you want your disk to work, create a test EN project with 2 menus. Rename one of them "Main Menu" with 2 buttons "Play Movie" and "Subtitle Setup." Rename the second menu "Subtitle Setup" with 3 buttons, "Subtitle On," "Subtitle Off," and "Main Menu." As noted, the "Default Button" property for the menu "Subtitle Setup" will be "Active Subtitle Track." The button "Subtitle On," using specify link, will link to its own menu, default button, but will specify Subtitle 1. Same for the button "Subtitle Off," except that it will specify Subtitle Off. The Main Menu button simply links to the main menu.
Note that in Encore preview, do not use your computer mouse to hover over the buttons. It will trick you into thinking that you have or have not set the behavior correctly. Use the little remote function in the bottom of the preview window.

Stop button to Main menu

Similar Messages

Maybe you are looking for