Animation keeps running through. I want it to stop on main menu so i can click buttons

animation keeps running through. I want it to stop on main menu so i can click buttons which navigate to different scenes. Please help I am a noob.
here are screen shots of what i have going on:
Main time line "home" menu
script in frame 1
script in frame 48
scene 2 animation of shape tween which isnt supposed to run all the way through past the home page. I want it to animate but only after i click the button to do so.
script for this scene
scene 3 which is causing all the issues i think? supposed to be able to drag boxes. but it just runs through without stopping when i play it.
here is the compiler errors:

If you removed the stop() from scene 2 it will not stop there it will return to wherever "home" is.
If you intend to have the timeline stop at some frame, then you need to place a stop() command in that frame, or use a gotoAndStop() command.
If you are going to use scenes be consistent with the way you write the goto commands. The use of is rarely recommended - instead, use different sections of the timeline of just one scene, or use movieclips and control their visibility, or a combination of both.
If you continue to have issues, try simplifying first - build/add the navigation for one section at a time instead of trying to get it all in one shot.

Similar Messages

New iPod Classic keeps running through podcasts

My old iPod classic recently died and I bought a new class (120g). I'm all synched, but there's a problem when playing podcasts: The new iPod plays through all episodes of a podcast without stopping.
My old iPod would stop playing at the end of a episode.
For both iPods, shuffle is "off" and repeat is "off".
How do I get my new iPod to naturally stop at the end of a podcast episode??
Thanks!

It may be related to the data "caching" used by iPods with a hard drive for storage. This caching (pre-loading upcoming song data into memory) allows the iPod to play continuously, even if movement and vibration cause access to the iPod's hard drive to NOT be continuous. However, if the iPod is stationary on a desk, this should not happen.
If you have not already, Reset (restart) the iPod
http://support.apple.com/kb/ht1320
If that does not help, you may want to do a Restore on the iPod using iTunes. The cause may be data corruption on the iPod's storage. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings. After the Restore, sync your songs as before, and see of this problem still recurs.
It's also possible that the iPod's hard drive is faulty, and that is why the iPod is having problems accessing the song data (which causes these pauses). If the Restore does not resolve this problem, you should have it looked at under warranty. If there is a conveniently located Apple Store, you can make a reservation at the store's Genius Bar. OR, if possible, return it for a full refund and get another one.

Was trying to send a movie by email, ipad file to large, do you want to reduce and send, i said ok, hit send, screen went black and little circle keeps going round and round and wont stop. what can i do, and whats wrong?

was trying to send movie by email ipad said file to large do you want to reduce and send, i said ok, hit send, screen went blank and little circle keeps running round and round and wont stop.
how do i fix this and what is going on?

"try to restart the iPad, if you can't access mail, try to hold restart by pressing home button and Lock button together."
You should click Reply in the specific message you are responding to.

I can't update my apps nor download apps it just keeps running in circles

I can't update my apps nor download apps it just keeps running in circles. This has happened in this new year. Can anyone give me some help? It would be greatly appreciated.

Hey Doris140 ,
Thanks for the question. It sounds like you might have apps that are stuck on “Waiting," and the following is a past discussion that dealt with a similar issue and may help you as well:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

My fan keeps running and never stop

my laptop is dell studio 1458
the system is the latest archlinx x64, and now i am using kde 4.6
the problem is that the fan of my laptop keeps running all the time and never stop.
Is there any solution to this problem?
Thx...

The warning is there so that people realize they need to be aware of the possible outcome if they don't properly check their fans during the setting up of the software.
The guide even suggests to keep a constant watch on the CPU's temperature during testing, and suggests how you can immediately spin up the fans to max in case of a too high temperature:
Second warning: Some of the steps outlined below describe how to tweak fan speeds. Before doing this be sure you have a low cpu load and are comfortable playing around. If at any time during tweaking you notice the CPU temperature start to rise dramatically, do a echo "255" > /sys/class/hwmon/hwmon0/device/pwm1 to spin up the fan all the way until things cool down. Basically, you should know what you're doing before fooling with the configuration file.
Alternatively, there's a fan control deamon called dellfand. A related topic can be found here:
https://bbs.archlinux.org/viewtopic.php?id=54865
Essentially, all these tools do the same. The temperature is polled and the fan speed is adjusted.
As far as I know, there is no alternative way / graphical tool to do this for you.
*edit*
considering this is a dell studio, have you checked the system's bios to see if the automated fan control is enabled?
Last edited by stefanwilkens (2011-04-29 13:03:18)

Is it possible to have emtpy space in program that can "click through"?

I am writing a java program that would need me have a table look that I can click through the space in the square within the table, so I can click on the stuff on Windows desktop. Is it even possible with Java?
Thanks a lot!

This is part of my school project.
I am working a program that is a table, and detect the color on the windows desktop area under each "hole", once the color change, the program would do something to show this "hole" has something change. I need to able to click in the "hole" as well, directly click the Windows area right under the Java. That's why I need to do "true" transparent for the "hole" area in the table.
Really hope someone knows how to do it.

Want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through a long procedure each time

I want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through the long tedious procedure each time I install firefox. It is something that should be in the options tab , and I want to know why it isn't. I am totally frustrated with firefox and getting ready to switch.

You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

Important note, do NOT sleep your macbook Air with headphones attached until this is resolved.
Ive done a good best of testing on same to confirm not to do that
also if you have the APP "BOOM" installed........ remove it

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

I've a macbook pro 10.5.8 osx which I want to Keep running (traktor dj soft) whilst shut and see screen in realtime on my iphone

Hi guys, i'm a noob on here, I've a macbook pro 10.5.8 osx which I want to Keep running (traktor dj soft) whilst shut and see screen in realtime on my iphone (laptop open = zero crowd interaction

First, make sure that the apps that you depend on are Intel-compatible and not PPC only Take a stroll over to Roaring Apps and make sure that you check all of the applications that you use on a regular basis.
You might want to just upgrade to Snow Leopard if it looks as if you've a number of PPC apps - going the Mountain Lion route may be very expensive for you otherwise.
Good luck,
Clinton

Need multiple 'MAIL' Icons. Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain

Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain the butt. This has been a request from Apple users for many years. it's great you can now combine all emails into one, but some people want them kept separate and have separate icons on the main page. They could easily do this by having one "MAIL" account as white and another red. Or put MAIL 1 and MAIL 2. Or an actual label that the mail accounts are called on the ICONS!!
Help!

eshghoolak wrote:
...I could switch back and forth between accounts while in the mailbox, with one button. I think that is what you are referring to? Whoever said it's just a simple switching - you obviously haven't had the pleasure of using an Android device. It's not that quick to go back and forth - definitely not efficient...
Not that it matters a lot, Android vs iPhone interface is largely a matter of personal preference and what you know... I'm not sure which one you're saying is not efficient...
In any event...
I currently have two email accounts setup. My iPhone main page Mailbox settings reads:
Mailboxes
Inboxes
All Inboxes
Gmail
[email protected]
Accounts
Gmail
[email protected]
I wish there an efficient way to move back and forth while in the "Inbox" between accounts. Also, Why does one gmail account show as "Gmail" and another as the actually address?
The names are based on the names you gave the accounts when you set them up.
Settings>Mail, Contacts, Calendars.
Tap the account you want to re-name. Go to the "Description" field and put in what ever you want.
Second, there is no way to quickly choose a bunch of emails to delete. I have to manually go into each one and move it to the Trash folder.
If you tap the edit button in the upper right while in mail, you can select multiple items to move, delete or mark (flag).
I don't want any of the condescending remarks, that I've read here and in other forums. I'm honestly looking for a solution, which I think you are too! One thing I realized is that iPhone users in these forums are really defensive and quick to say "that's how it is, live with it, if you don't like it go away" Um...the only thing that tells me is you are pretty bitter and have kept telling yourself that, to force yourself to like your device. I prefer to express my issues, and find solutions. There is ALWAYS a solution...
I think what you will find is that many people here, myself included, tend to get a bit short with people who start off with attacks or whining about how something has been asked for for years and should be easy, rant about things that have already been beaten to death multiple times in the forums, talk about how much better Android or BB are at something (really... if it's that much better, why did they buy an iPhone to begin with?), etc., or continue to ask questions that could easily be answered with a simple search, or even just by looking back at the last dozen posts to the forum, half of which probably asked the EXACT SAME question.
I don't think any of us go out of our way to be rude or uncivil. That said, attacking the people who are attempting to help you is much more likely to generate a response of 'if you don't like it, go away', than it is to generate something that will be truly helpful.

Any ideas on a cleaner way to write this? - run through a function with multiple steps; if any step fails, restart the function from the begining

Basically there are 3 different functions for various "tests"; they each return "1" if the test passes and "0" on failure. A "master" function calls these 3 functions in the desired order and keeps a counter
of tests that pass. The counter has to be 1 to proceed to step 2, has to be 2 to proceed to step 3, and when it's 3 the loop closes.
This approach is giving the expected results, but I was wondering if anyone has ideas on a cleaner approach? What I really wanted to accomplish was to have the 3 tests past in succession and to provide an overall pass and proceed to the next step;
and also to exit the function if any step fails rather than running through each step before trying again. If the script were to for example loop through the 3 tests and wait until each one passes, tests 1 and 2 might pass, but then 3 might fail
a few times and finally pass before the script exits. I did not want to allow for that scenario to count as an overall pass.
Function Test1 {
If PASS Return 1
If FAIL Return 0
Function Test2 {
If PASS Return 1
If FAIL Return 0
Function Test3 {
If PASS Return 1
If FAIL Return 0
Function TestAll
[int]$counter = 0
$Check1 = Test1
If ($check1 -eq 1) {$counter++}
If ($counter -lt 1) {Exit}
Start-Sleep -s 15
$check2 = Test2
If ($check2 -eq 1) {$counter++}
If ($counter -lt 2) {Exit}
Start-Sleep -s 15
$check3 = Test3
If ($check3 -eq 1) {$counter++}
If ($counter -lt 3) {Exit}
Return $counter
Do {$STATUSCOUNT = TestAll}
While ($STATUSCOUNT -lt "3")

This is cleaner:
Function Test1 {
If PASS Return 1
If FAIL Return 0
Function Test2 {
If PASS Return 1
If FAIL Return 0
Function Test3 {
If PASS Return 1
If FAIL Return 0
Function TestAll{
while($true){
while($true){
$counter=0
if(($counter+=Test1) -ne 1){break}
if(($counter+=Test2) -ne 2){break}
if(($counter+=Test2) -ne 3){break}
return
Write-Host ('try again' + $counter) -fore
TestAll
Of course all of your test functions have syntax errors.
\_(ツ)_/

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

My Ipad mini keeps going through various applications all by itself and won't allow me to close them

My Ipad keeps going through my contacts, e-mail, ITunes, types by itself and will go through these apps over and over again. I can close them while in the process but just as I close them with the home button it starts right up again. I have tried closing all the open apps by double clicking the home button, which it will show the screen of all the apps but when I try to hold them down to delete them it doesn't respond. I have tried hard reset twice by holding the home button and the top button until the apple logo appears but this hasn't worked.
Diver

Hi Diver,
I haven't ever seen this happen, but if quitting apps and hard resets don't do it you might want to start clean. Are you able to run a backup of your iPad mini? If I was in your shoes, I would back up the iPad, erase the iPad and then restore the data to see if that fixes it.
Step 1 would be to back up the data (see http://support.apple.com/kb/ht1766).
Step 2 would be to restore the iPad to factory settings (see http://support.apple.com/kb/HT1414).
Step 3 would be to restore the backup (see http://support.apple.com/kb/ht1766).
Hope this helps!!
~Joe

Animation keeps running through. I want it to stop on main menu so i can click buttons

Similar Messages

Maybe you are looking for