Stop Inbound IDOC's from being created

I want to stop inbound IDOC's for a particular partner (type LS) from being created in our R/3 system. Is there a way to do this? I am aware these can be stopped in the middleware, but this is not possible in our case.  I am also aware that I can stop these IDOC's from being processed via the partner profile, however, there will be a huge number of useless IDOC's that will be created in our system and I want to avoid that.
Hence, I do not want the inbound IDOC's to be created in the first place even though they are transmitted to SAP. Is this possible?
Any inputs will be highly appreciated.
Thanks,
Raghu.

Hi Satwik,
Choose Idoc in WE02.
Get port name, Then in WE21 get RFC name.
Go to transaction SMQS - Here we can block this RFC instead of blocking the queue.
Thanks,
Anil

Similar Messages

  • How Can I Stop My Music Folder From Being Created...

    I have installed and successfully migrated my iTunes to a NAS...the problem is that everytime I start iTunes it recreates the My Music folder on my local hard drive...as (a) I no longer need or want this folder and (b) I find it both annoying and potentially confusing that ut appears, is there any way to stop it from being recreated time after time...
    Thanks so much...
    Joel
    Message was edited by: Joelc_Sonos User

    Must be missing something in description. My Music folder is from Windows not iTunes. iTunes places its content in iTunes folder inside My Music folder. As for not using the folder I don't think you can. The iTunes library file(itl, xml) are put into iTunes folder inside My Music folder.

  • .DS_Store files on USB thumbdrives - a way to stop them from being created?

    Hello!
    Forgive me if this has been asked to death, but at school I need to copy homework files back and forth to the school's XP-based computers constantly. Because in any given day I usually update half a dozen files across the "homework" folder on my Powerbook, it's easier just to copy the entire folder (and its subfolders) to my 2-GB, FAT-32 formatted flash drive each night - all 500 files (and 150 MB). Of course, this also leaves hundreds of .DS_Store and ._filename files to clutter "Windows explorer" windows.
    My question is how do I remove (and prevent creation of) these files selectively? I know that they are used by the finder to store thumbnails, spotlight comments, and labels. The big problem is that while I want to remove these files from the homework folder (and some other folders), I DO NOT want to remove them from a few other folders on the flash drive - which I use to make quick backups of files from my Mac.
    I know that I can prevent OS X from creating them altogether with certain utilities, and I know that I can get third-party utilities that allow me to remove these files from flash drive and/or prevent the creation of the files for entire volumes, but is there something I can do to remove them from only certain folders?
    Also, since I do not always know beforehand what directories I might make, I'd like to be able to create a "white list" of only certain directories (and their sub-directories)that won't be touched, while all others will have their ".DS_Store" and "._filename" files removed.
    Finally, because I'm often a hurry when I go to copy files, I'd rather not sit there and run terminal commands or a program every time I copy a folder over to the flash drive. Is there some way to prevent them from being created in these certain folders altogether, automatically? An applescript or terminal command that I can program to run from the script menu perhaps? I don't mind opening a program or script, I just don't want to have to sit there manually removing the files.
    Thanks,
    -Dan

    I had a similar problem awhile back and asked for help in the Applescript forum:
    http://discussions.apple.com/thread.jspa?threadID=954738&tstart=0
    Unfortunately the revised jive software formatting function here in the forums has totally messed up things like posted scripts. What you'll see in the scripts discussed is no longer what was there originally. I just now put a copy of the script I'm using up in zip format here:
    http://homepage.mac.com/francines/.Public/CopyStrip2Fat.zip
    Unzip and open in Script Editor to get some idea of what it is really supposed to be. The idiot formatting of the revised jive software has replaced some things with a carriage return, a semi-colon, and close quote, thus rendering some lines meaningless.
    To see the source of the script I quoted, see this MacOSXHints thread:
    http://www.macosxhints.com/article.php?story=20040726164957299
    The script is in the comment by cougar718. You might take a look at other comments as well.
    Francine
    Francine
    Schwieder

  • JDBC -- XI -- IDoc Scenario... IDoc Extension not being created...

    Hi,
    I hope you can help with this issue... I have a scenario which involves mapping to an IDoc which we have extended. From IDX5 I can see the outbound message from XI and in the XML I can see the extension segments have been properly created. But when the IDoc is posted to the destination system these segments are not there.
    I have checked so far...
    - The correct IDoc definition with extension has been imported
    - The IDoc which is being created contains the extension in the control record
    - Refreshed all caches
    - Deleted and reimported IDoc metadata
    If anyone has come across this issue before, please let me know...
    Thanks,
    Pete

    Hi Pete,
    Please check the Idoc receiver communication channel. Apply Control Record Values from Payload should be checked.
    Thanks,
    Shubhankar

  • Prevent resource fork from being created on windows network shares

    I've already seen this article on how to prevent creating ds_store files on windows machines:
    http://docs.info.apple.com/article.html?artnum=301711
    But I haven't seen any way (short of buying software) to prevent the resource forks from being created. OSX creates resource forks on remote network volumes that pile up, are useless to the windows users, and creates a lot of grief.
    For every file copied to a windows share, OSX is putting a duplicate (unopenable) file with an underscore prefix:
    _file1.psd
    _file2.psd
    file1.psd
    file2.psd
    This is kind of rude network behavior, and I'd like to stop doing it.
    Isn't there some sort of terminal command similar to the .ds_store solution I posted above?

    I swear I saw a hack for that somewhere, but give up after 3 hours of searching for it!
    Seems like BlueHarvest at $10 is the best solution as it is...
    http://www.zeroonetwenty.com/blueharvest/
    Wondering if we couldn't "invent" something to add to that com.apple.desktopservices.plist file!?

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • Prevent infotype 0416 from being created under certain conditions

    Hi,
    Based on an advanced leave formula I can determine at runtime whether or not the infotype 416 record should be created or not. The formula is working.
    What is not working is that I need to find a way to prevent the 416 record from being created when the formula returns certain values. I have looked at ZXPADU02 and various other user exits and badi's but to no avail. The ZXPADU02 does not have the field which needs to be checked i.e. PA04160-NUMBR.
    Regards,
    Warren.

    Hi,
    The data is in INNNN structure.
    Write this code in include ZXPADU02 & set a break-point & check the value.
    case innnn-infty.
      when '0416' .
    perform validate_it0416
            using innnn
                  ipsyst.
    FORM validate_it0416 USING    p_innnn
                                   p_ipsyst.
       DATA: i_psyst LIKE psyst.
       DATA: i_nnnn  LIKE prelp.
       DATA: ps0416 LIKE ps0416.
       i_psyst = p_ipsyst.
       i_nnnn  = p_innnn.
       ps0416  = i_nnnn-data1
    if ps0416-numbr = ' '  "<b> check ur ondition here</b> endif.
    Hope this helps & solve your problem.
    Thanks,
    Sarika.

  • How do I stop all outgoing mail from being stored in my sent folder?

    How do I stop all outgoing mail from being stored in my sent folder?

    You cannot, but you can delete the mail in your Sent folder.

  • Stop network home from being created and shared on login

    I have successfully set up a OD server bound to Active Directory. I have the shares set up exactly how I want them - except - I don't want network users to have their home folder automatically created. I am only using AD for authentication and not network home folders. Is there a way for when a user logs in to not have the home folder created on the server and thus preventing it from being shared. I only want the shares that I have specified in the Share Point window to show up.

    Hi there,
    I bring good tidings .
    After some tweeking I've gotten this to work.
    Replace [YOURDOMAIN] with the first part of the FQDN, e.g. my.domain.net will make MY.plist
    Step 1:
    copy /Library/Preferences/OpenDirectory/Configurations/Active Directory/[YOUDORMAIN].plist to your Desktop
    Change the permissions so you can edit the plist file (I use Plist Editor pro to edit.)
    Step 2:
    Find the key:
    MCXDockSpecialFolders-Raw
    Step 3:
    Delete the string under it:
    0          AddDockMCXOriginalNetworkHomeFolder
    Step 4:
    sudo cp [YOURDOMAIN].plist /Library/Preferences/OpenDirectory/Configurations/Active Directory/[YOURDOMAIN].plist
    Reboot and watch the magic happen!!
    I have been fiddling about with some other settings in this plist, it seems to be very powerfull.
    I don't know why apple doesn't make options in the AD Plugin to manage these settings, but then again power = the power to break things.
    I still mount the network home drive, but I do it with a login hook so that I have the power.
    Hope to have made some people happy, but I bet I have.
    It's a pity I don't get points for resolving issues myself, this one would be word many points.

  • Inbound idoc for orders05 to create sales order

    Hi all,
    I am creating a sales order through idoc (ORDERS05). I am getting a flat file, which is being converted into idoc from XI side and i need to add certain things and validate inside the function module IDOC_INPUT_OREDERS. I am using the exit call customer function '002' (EXIT_SAPLVEDA_002)  in it.
    My confusion is regarding the population of control records. If some validation fails, i need to set current status as 51. Which field i need to update in this exit in order to achieve this. What are the other control fields that i need to update for an inbound idoc please specify.
    Also, i have another doubt, what is the use of DXBDCDATA in that exit. Do i need to do any BDC related work in inbound idocs.
    I am new to inbound idoc scenario. But havn't found enough tutorial related to standard idoc generation..
    thanks

    Hi,
    I think, you should fill the validation errors in EXIT_SAPLVEDA_011 (SD EDI Incoming Orders: Final Processing of Internal Error Tables) which subsequently update the status records of IDOC.  Check line NO 56 of function module "IDOC_INPUT_ORDERS".
    Regards
    Vinod

  • Some Data Missing in the inbound Idoc received from Gentran

    Hi,
    We are receing one custom message type with the basic type ORDER05 in SAP from Gentran. When we checked the destination file generated in Gentran, its showing data for all the segments. However in SAP when we checked the corresponding idoc we find the segment E1EDP05 is missing. The Gentran team says they are placing the destination file in the unix server of SAP. However we dont find these files in the SAP Unix server. Could anybody advise what could be the problem and where we need to check further ?

    Gentran will never be able to create an IDOC within SAP. Here is what happens:
    > Gentran creates a flatfile/XML which is in the IDOC format (the one which you can see in WE60).
    > Gentran then places this flat file/XML in a folder on Application server. This can be UNIX, Windows NT, etc..
    > Gentran then triggers the Startrfc.exe which will trigger EDI_DATA_INCOMING function module.
    > This FM will parse the data, check it for consistency of the defined standards, then write the control record into EDIDC and corresponding data records into EDID4 and updates the relevant statuses (i.e. 01 - added, etc). It'll then look into the partner profile setup, look for process code and moves the status to 64 and calls the inbound FM which will post the application document.
    In you case, you need to find out what file is coming in and where E1EDP05 has missed. The data will only be sent by Gentran. The inbound function modules will never update IDOC data records (unless there is a customization). The status records are updated.
    If E1EDP05 is not mapped and sent by Gentran and you still used to see it, then there should have been a customization in place to add values to IDOC segment fields. Try to get the final file that is mapped from either X12/EDIFACT and then see if E1EDP05 segment is present in there. If it is present then upload the same file into AL11 using CG3Z and call EDI_DATA_INCOMING or WE19 to process it. Once processed, you'll can observe if E1EDP05 is being created or not.

  • Outbound delivery creation with inbound IDOC transfer from Java system

    Dear Experts,
           The scenario we are having is really very interesting. Hopefully its a good learning for me and also for others also.
    The scenario is,
                   After sales order creation the details will be sent to one Non SAP system (Java) for performing some tasks related to forwarding agent decision, shipping date and etc. Once the details are finalized in that Java system then, the details needs to be transferred to SAP as "Inbound IDOC" process. For this proposed to use the SAP Jco middle ware.
                 Once the details transfered from Java system to SAP then, the outbound IDOC needs to get generated automatically. Assuming the stock for that sales order line item is available. Also one more complexity is, our client is using custom transaction (ZVl10C) for delivery creation.
    Now Query is,
                   1. Which IDOC, message type and Functional module needs to be used for creating the delivery automatically..??
                   2. As per assumption, stock of that sales order line item should be available. Due to some business reason the stock was removed during inbound IDOC transfer then, what will happen to the IDOC..?. How to avoid this situation..??
                   3. As we told we are re going to use SAP Jco b/w SAP & Java system. In this case, how the data will get transfered from Java system to SAP..?
    Thanks in advance for the replies I am going to get
    Regards,
    VEL

    Didn't get any feedback from experts for long time. So we are closing the question

  • How to get the inbound idoc for the newly created inbound Idoc FM

    Hi,
    I have created a new function module to process the Inbound idoc.  I need to have a idoc to check my function module, whether it is working fine or not.  How I can get the data.  Do I need to have the idoc from the partner ?  Please help me ASAP.
    Thanks,
    sreenivas.

    Hi Sreenivas,
    Go to WE19 and get any of the your present idoc  with the idoc type
    then go to BD20...execute the same idoc...and there you can create the IDoc, and process the same with the Inbound function module tab..( give the FM you are using as the process code.)
    from there you can do the debugging aswell of that FM
    Thanks

  • How do you stop an email from continually being recovered that has completely stopped any new mail from being received?

    In trying to send an oversized video via email (exceeded 25 MG) size limit, I got an error message. I thought I deleted the email. However, whenever email is open, the message continually gets recovered, blocking any email from being recieved. I am able to create and send emails. Internet checks out ok. Using AOL.iMap. It seems that I am not able to interrupt the continual attempts to send the original email.

    To those who have viewed my question, thank you. I found the solution under "Mail sending and recovering emai!" I went to Email Preferences, Advanced, and selected "Dont't keep copies of any messages" on the pull down of Keep copies of messages for offline viewing:, saved changes and problem solved. Thanks,

  • Processing Inbound IDOC's from FTP.

    Hi,
             I have an issue where IDOC's (WPUBON01 & DEBMAS01) are being saved in ftp folder and once these IDOC's are saved, we have to process it in SAP System, i would like to know the simple way of having these IDOC's processed in Unix based SAP system as the IDOC's will be coming in at Real time evey minutes or Seconds.
             is there a way to do it with out ABAP process i mean just by using the Unix Scripts or by triggering the SAP background job.
    Thanks in Advance.

    Hi,
    for testing purposes you can trigger inbound IDoc processing in transaction WE16. Otherwise you can schedule program RSEINB00 to periodically import IDoc into system. You can make a copy of that program and made changes if you need to add some extra logic.
    Cheers

Maybe you are looking for