STOP keyword replacement in SAP ECC 6.0

Hi,
Can anyone please suggest me the replacement for the STOP keyword?
EXIT seemed like an option but as per the documentation, the STOP statement takes the control to the END-OF-SELECTION event whereas the EXIT will terminate the program.
I need the code in the END-OF-SELECTION event to be executed.
Please advice me on this.
Regards
s@k

Hi,
you can still use STOP command in NetWeaver 7.0. It's only marked as obsolete. Obviously, it's supported in ABAP objects because ABAP Objects don't support events and logical databases. Basically, event END-OF-SELECTION is useful only for logical databases, there is no need for it in normal reports. You can put your code at the end of event START-OF-SELECTION. I don't understand why developers user event END-OF-SELECTION in programs where they don't use logical databases. You should have not any problems to refactor your code to avoid using of command STOP with help from EXIT command.
Cheers

Similar Messages

What is sap ecc?

hi,
i am new to abap i want to upgrade from sap 4.7 to sap ecc 6.0
what are my parts in abap . please send detail documents to my
mail id
[email protected]

Hi
In SAP Netweaver platform SAP R/3 is replaced by SAP ECC.. its Enterprise Central Component, in SAP Netweaver 2004s the version is ECC 6.0.
See this link
http://help.sap.com/saphelp_erp2005/helpdata/en/43/44c532d36157c0e10000000a155369/Chap%2040%20IS-U%20SAP%20Utilities.pdf
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
If its helpful or solved your issue, pls award points.
Regards
Chandrasekar

Reg: Replacing i-way with PI for SAP ECC 6.0 version

Hello Experts
currently we are using R/3 4.7 version and middle ware we are using is i-way and we are planning to upgrade to ECC 6.0 and i would like to know how compatible is i-way is with SAP ECC 6.0 and is there any neccessity to replace the same with PI.
and currently we are using RFC as a method of communication between R/3 and i-way and in future i don't want to change the existing coding , is it feasible to use PI via RFC.
As i am ABAPer, i am new to this PI and please let me the know the risks involved and it is viability.
Thanks and Regards
S.Janagar

Hi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven

Replacing SAP ECC COPA Table

Hi,
we have implemented the SAP Best Practices for BI V4.31 (note 1475029).
One of the dashboards is Profit and Loss. It uses a couple of CR reports for data extraction for the SAP ECC.
In the report is a connection to a COPA table CE11102. In our environment this table is CE11000.
In CR / Database export I can change the name of the COPA Table from CE11102 to CE11000 but CR doesn't recognize our COPA table.
Please advice.
Regards,
Wiebe

Dear Ingo,
so you would like to replace one table of the delivered All in One report with a table from your system ?
Yes I have implemented almost all the CR reports and Xcelcius dashboards.
But...
When I update the database connection for the CR reports with a CO-PA table and other tables (like MARA, T023T and TVKOT) all the tables will connect to our environment exept the CO-PA table.
Please advice.
kind regards,
Wiebe Bartelink
ps. this is for Profit and Loss CR report 'Actual data.rpt'
Edited by: Wiebe Bartelink on Feb 29, 2012 4:45 PM

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

Sap Ecc 6.0 Installation error in Import Java dump e

Hi Friends,
I got error in Phase 20 of 45:-
ERROR 2015-08-06 17:01:26
CJS-30049 Execution of JLoad tool 'E:\j2sdk1.4.2_12\bin\java.exe -classpath "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jload.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/antlr.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jddi.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/opensqlsta.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;H:\usr\sap\ECC\SYS\exe\uc\NTI386\ojdbc14.jar" -sec ECC,jdbc/pool/ECC,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.properties,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.key -dataDir E:/sap_kol/javacomponent\JAVA_EXPORT\JDMP -job "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jload.java.log' for more information.
ERROR 2015-08-06 17:01:26
FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2015-08-06 17:16:48
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
Kindly help me!!
Anuska

Hi Markus, Debashis , Uday and Friends,
I am currently Watching Thread.
Plz Help Me.
Regards,
Anuska

Installation error in SAP ECC 6.0

Hi Experts,
i got an error while installing SAP Ecc 6.0 version at 13th (Create Database) step.
DB : Oracle
OS : windows 2003 server.
Any suggestions to overcone this please.
Thanks in advance.

Hi All,
I am getting the same error. I am using Windows 2008 & Oracle.
I have the following logs:
ora_sql_result.log
2011-09-01, 10:13:35 SAPINST ORACLE start logging for
@@ORADBUSR.SQL
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Sep 1 10:13:35 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Connected.
old   6:   if length('&&1') = 5 then
new   6:   if length('SAPSR3') = 5 then
old   7:     if substr(upper('&&1'),1,5) = 'SAPR3' then
new   7:     if substr(upper('SAPSR3'),1,5) = 'SAPR3' then
old 11:       if upper('&&2') = 'NT' then
new 11:       if upper('NT') = 'NT' then
old 18:      :sDomain := upper('&&3');
new 18:      :sDomain := upper('STNW04S02');
old 19:      :sSapSid := upper('&&4');
new 19:      :sSapSid := upper('P01');
old 21:      :sSapSid := upper('&&3');
new 21:      :sSapSid := upper('STNW04S02');
old 37:     :sSchema := upper('&&1');
new 37:     :sSchema := upper('SAPSR3');
old 39:     if upper('&&2') = 'NT' then
new 39:     if upper('NT') = 'NT' then
old 46:       :sDomain := upper('&&3');
new 46:       :sDomain := upper('STNW04S02');
old 47:       :sSapSid := upper('&&4');
new 47:       :sSapSid := upper('P01');
old 49:       :sSapSid := upper('&&3');
new 49:       :sSapSid := upper('STNW04S02');
using following Parameters:
. Oracle Version:                 10.2.0.4.0
. Parametervalue os_authent_prefix:   OPS$
. Schema Id:                      SR3
. Database User (Schema):            SAPSR3
. SAP R/3 Administrator:            OPS$STNW04S02\P01ADM
. SAP R/3 Serviceuser:             OPS$STNW04S02\SAPSERVICEP01
. Domain/Host:                  STNW04S02
unable to assign default tablespace to user: SAPSR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPSR3USR' does not exist
ORA-06512: at line 126
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program F:\oracle\P01\102/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-09-01, 10:13:37 SAPINST ORACLE stop logging
sapinst_ora_environment.log:
2011-09-01, 10:13:37 SAPINST Current process environment:
=C:=C:\Program Files\sapinst_instdir\NW701\LM\COPY\ORA\SYSTEM\CENTRAL\AS
=F:=F:\NW_701SR1\NW70_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CLIENTNAME=5V0PB4J
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=STNW04S02
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\j2sdk
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=
STNW04S02
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=F:\oracle\P01\102
ORACLE_SID=P01
OS=Windows_NT
Path=F:\oracle\P01\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\j2sdk\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PERL5LIB=F:\oracle\P01\102\perl\5.8.3\lib\MSWin32-x64;F:\oracle\P01\102\perl\5.8.3\lib;F:\oracle\P01\102\perl\5.8.3\lib\MSWin32-x64;F:\oracle\P01\102\perl\site\5.8.3;F:\oracle\P01\102\perl\site\5.8.3\lib;F:\oracle\P01\102\sysman\admin\scripts;F:\oracle\P01\102\perl\5.8.3\lib\MSWin32-x64;F:\oracle\P01\102\perl\5.8.3\lib;F:\oracle\P01\102\perl\5.8.3\lib\MSWin32-x64;F:\oracle\P01\102\perl\site\5.8.3;F:\oracle\P01\102\perl\site\5.8.3\lib;F:\oracle\P01\102\sysman\admin\scripts
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=AMD64 Family 16 Model 2 Stepping 3, AuthenticAMD
PROCESSOR_LEVEL=16
PROCESSOR_REVISION=0203
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SAPINST_EXEDIR_CD=F:/NW_701SR1/NW70_Master/IM_WINDOWS_X86_64
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/2/sapinst_exe.2624.1314861828/jre
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp\2
TMP=C:\Users\ADMINI~1\AppData\Local\Temp\2
USERDOMAIN=STNW04S02
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
SAPINST: End of current process environment.
Further environment variables that where set (possibly overwriting the previous ones):
ORACLE_HOME=F:\oracle\P01\102
ORACLE_SID=P01
SAPINST: End of environment log.

Upgrade of Sourcesystem SAP EHP3 SAP ECC 6.0 to SAP EHP4 SAP ECC 6.0

Hi,
I noticed there is a lot of questions on the testing procedures for BI side when Upgrading the source system from R/3 to ECC 6.0. But noticed there aren't many posts on when doing Ehancement Packs. But I believe the process would be more or less the same?
My project is doing an Upgrade of SAP EHP3 SAP ECC 6.0 Stack03 to SAP EHP4 SAP ECC 6.0 Stack07. BI Side is also upgraded, but I am more interested in the impact of the Upgrade's Source System (ECC) on BI.
I believe the amount of impact is less as compared to an upgrade from R/3 to ECC, but there still should be impact to BI somehow.
Basically, from what I have researched, there correct procedure is as below:
Pre-Upgrade
1 - Lock users in ECC
2 - ensure that the Delta queue is cleared in RSA7
3 - check the PI in ECC6.0 ( What is PI???)
3 - stop all loads from BW
Post-upgrade
1 - Check Source System connections
2 - replicate all data sources in ECC (when I do a check connection in RSA1 I get the message "No metadata upload since upgrade" which I believe is due to this step not done yet? Is it ok to replicate all datasources??)
3 - activate all rules thru program (RS_TRANSTRU_ACTIVATE_ALL. Is it ok to activate all transfer strucs?)
4 - run Init w/o Data Transfer for deltas
5- run and then check extraction for full & delta loads
Appreciate if I could your expert inputs on the procedures above? Maybe a more detailed step by step procedure or comments are most welcomed.
Thanks.

Additional information:
I start the upgrade from SAP ECC 6.0 with a dual stack.
SAP advised me to download the following file to start the upgrade
SAPehpi_68-10005800.SAR from the SMP
Download path: Browse our Download Catalog--> Additional Components --> Upgrade tools --> SAP EHPI Installer --> SAP EHP Installer 7.00.
Start the upgrade without the jce_policy_zip extension. This was written in note 1302772 .
Have more luck with it.

Difference between SAP 4.7EE and SAP ECC 6.0 in terms of ABAP

Hi all,
I would like to know the differences between the SAP-4.7EE and SAP ECC 6.0 in terms of ABAP?
can any body Please Help me?

Hi Vijay,
In terms of ABAP some function modules are obsolete in 4.7.
e.g WS_UPLOAD, WS_DOWNLOAD etc.
You can find the list of obsolete FMs in the table RODIR.
These need to be replaced in the ECC System.
Also ECC is very strict in case of EPC Errors. You need to check the EPC and remove the call function interface errors where it says SLIN observes catching of a runtime error. These might work with no issues in 4.7 but will shortdump in ECC.
If you are doing to a unicode conversion also. you need to check the transaction UCCHECK for unicode errors.
You also need to replace obsolete statements like >< and => , =< etc.
Please let me know if you need any further info on this.
Thanks,
Sai

Technical differences between SAP Enterprise and SAP ECC 6.0

Hi,
Can anyone plz tell me what will change technically after the upgrade from SAP Enterprise to SAP ECC 6.0, in respect to reports, module pool programming and other technical logics?
Thx,
KK

Difference b/t ABAP4.7 and ECC6.0.
Difference between R/3 4.7, ECC5 & ECC6 anyone?
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
See this weblog:
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://service.sap.com/erp
http://www.stonewayinc.com/clients/sap/bestoftour/presentations/SAP_BOT_2_Furlan_IBM.ppt
From the ABAP perspective, few differences are.
The WS_* function modules used in 4.6c has become obsolete from 4.7C. All the WS_* FMs have been replaced by GUI_* FMs.
(ii) Concept of Unicode is introduced.
(iii) Few tables have been modified in ECC6.0.
Tables TVARV & TTREX have been replaced by TVARVC & TTREXN respectively.
(iv) we have enhancement points and enhancement sections along with enhancemnts and BADI'S . and we can write the part of code in those points.
For functional differences please check out the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Reward points for useful Answers
Thanks
Murali Poli

** The XML output file is unreadable in SAP ECC 6.0 (Working fine in 4.6c)

Hi Friends,
I am working in SAP Technical upgrade Project from 4.6C to SAP ECC 6.0. In 4.6c one Z program is there, the output of Z program is to generate output XML file in the application Server. We checked and downloaded that the output file is readable and the XML is valid.
When we run the same program in ECC 6.0. (after unicode check & changes done), the output xml file is generated and it is in unreadable form. (XML contains some machine characters). When we open the XML in Altova Spy, it shows the error XML is invalid. The erorr is 'character #x3F3C is grammatically unexpected'.
In 4.6c, they used the encoding <?xml version="1.0" encoding="ISO-8859-1" ?> . We changed the encoding to UTF-8 in ECC 6.0 since we are doing unicode conversion. (
<?xml version="1.0" encoding="UTF-8" ?> ). After this change also, the output file is not generated correctly. It is unreadable form. (Some Machine Characters).
Friends, What could be the problem ? . Can you help me to identify this problem.
Kind regards,
Jegathees P.

I troubleshooted that, the reason is that conversion of X to C (Hexadecimal to C) in the ASSIGN statement is not working correctly in ECC 6.0. Then, we replaced the code with our custom Function Module to convert xstring to string. After this, we got the XML correctly, readable and well-formed XML.

Extraction from SAP ECC to SAP BI

What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

Hi,
we have two types of extractions 1) Application specific 2)cross application
under applicatin specific -->we have customer genenrated and business content extractions
under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
Business content means there is ready made business content datasource so we can use it
LIS,LO --> when ever we go for extracting logistics informatin
LO steps
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
LO Cockpit (Use transaction LBWE)
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
under cross Applicaion
Generic extraction-->table, view, infoset query, function module
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Infoset Query
3. Based on Function module
GenericSteps
Log on sap R/3.
Step 1. create a table or view for generic extraction in se11.
Step 2. Goto t-code RSO2
Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
Step 5. select create button,this will take u to another screen.
Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
Step 8. then U have to Table name or view name which u have created in se11.
Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
Step 10. in next screen u have to give some field which is primary key.
step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
step 12. then u have to specify whether new status for changed records or additive delta.
If u choose additive delta ,then u have to load data to infocube or ods object.
If u choose new status for changed records, then u to load data to ods object only.
Step 13. then save it.
Step 14. then logon to sap bw ,then replicate the data source then as usuall.
COPA
CO-PA--> for financial info
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
You can browse forum for more detailed info..
Regards,
B

Lo-Extraction Job Failed in SAP ECC 6.0

Hello,
My Lo-extraction job failed yesterday because of this I'm unable to extract the delta data from SAP ECC 6.0 to BI. When I extract the Delta data from 2LIS_11_VAITM to BI there is no data because of Job failed in SAP ECC 6.0.
How to get the data back to 2LIS_11_VAITM data source?
Thanks

Error log display as follows
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMCEX" or "LMCEXU14"
"MCEX_UPDATE_11"
Actually I add ZZ fields to structure if that is the case do i need to delete the data from MCEX11 ?
I delete the data from setup tables but i did not delete the LUW entries?
When do we delete the LUW entries?
If the structure changes do I need to cancel the old job and re-schedule job?
Thanks

HACMP Clustering Script for SAP ECC 6.0 (SR1) - Automatic Failover-Oracle10

Hello,
I have installed the SAP ECC 6.0 (SR1) under AIX 5.3 / Oracle 10g with HACMP Clustering environment. Manual Failover is working fine. ASCS and Database instances are loaded in share drive with Virtual IP and Virtual name. Central Instance and Dialog Instance are loaded locally in Node A and Node B. I want to get HACMP Clustering script(automatic failover script) for Automation. Please help me if you have.
Thanks
Gautam Poddar

Here are HA stop & start scripts that you should be able adapt for your particular circumstances. Based on earlier versions of SAP / Oracle but assume should be a reasonable guide
Script to start SAP is start_sap_prd
#!/bin/ksh
Script:         /usr/local/bin/cluster/start_sap_prd
Comments:       HACMP Application START script for PRD
Show me obvious information in hacmp.out
banner "Starting"
banner "PRD SAP"
Set the oracle and sap owner.
ORASID="PRD"
SAPADM="prdadm"
ORAUSR="oraprd"
VIRTUALHOST="vhost"
DEVHOST="vhostdev"
Get the volume groups for this resource group
RG=$( /usr/es/sbin/cluster/utilities/cllsgrp | grep -i $ )
VG_LIST=$( /usr/es/sbin/cluster/utilities/cllsres -g $ | \
        grep "VOLUME_GROUP=" | \
        awk -F\" '{ print $2 }' )
Check the transport directory is mounted.
if mount | grep -w "/usr/sap/trans"
then
        print "Transport directory is already mounted."
else
        cd /tmp
        print "Attempting a background mount of the transport directory."
        nohup mount -o intr,bg,soft :/usr/sap/trans1 /usr/sap/trans &
fi
#Start SAP and Oracle
#Start listener
su - $ -c /rprd/oracle/PRD/920_64/bin/lsnrctl start
rc=$?
if [ $? != 0 ]
then
        echo "ERROR: Listener failed to start\n"
fi
#Start Database
su - $ -c "/rprd/oracle/PRD/bin/start_database_PRD.sh"
sleep 20
Standard sapstart script
su - $ -c startsap $
Script:       /usr/local/bin/cluster/stop_sap_prd
Dated:        01/11/06
Application: Oracle/SAP
Comments:     HACMP Application STOP script for SAP / Oracle PRD
Show me obvious information in hacmp.out
Set the oracle and sap owner.
rc=$?
if [ $? != 0 ]
then
        echo "ERROR: Failed to start SAP\n"
fi
exit 0
Script to stop SAP is stop_sap_prd
#!/bin/ksh
set -x
banner "stopping"
banner "PRD SAP"
ORASID="PRD"
SAPADM="prdadm"
ORAUSR="oraprd"
VIRTUALHOST="vhost"
#Stop SAP/Oracle
su - $ -c stopsap $
rc=$?
if [ $? != 0 ]
then
        echo "ERROR: Failed to stop SAP and Oracle\n"
        break
fi
Stop SAP collector and Oracle listener.
su - $ -c /usr/sap/PRD/SYS/exe/run/saposcol -k
rc=$?
if [ $? != 0 ]
then
        echo "ERROR: Failed to stop SAPOSCOL \n"
fi
su - $ -c /rprd/oracle/PRD/920_64/bin/lsnrctl stop
rc=$?
if [ $? != 0 ]
then
        echo "ERROR: Listener failed to stop\n"
fi
if mount | grep -w "/usr/sap/trans"
then
        print "Transport directory is mounted."
        /usr/es/sbin/cluster/events/utils/cl_nfskill -k -u /usr/sap/trans
        sleep 1
        /usr/es/sbin/cluster/events/utils/cl_nfskill -k -u /usr/sap/trans
        sleep 1
        umount -f /usr/sap/trans &
else
        print "Transport directory is not mounted."
fi
exit 0

Business Service Issue for OSB 10.3.1 when call web service of SAP ECC 710

Hello,
1 . I was doing unit test for a business service which called a web service from SAP ECC 710 (This service is published directly from a RFC function module via SOA Manager);
2 .The problem is when i use the OSB test console , which generate request message below:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
*<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">*
*</soap:Header>*
<soapenv:Body>
<urn:Zmmjf503 xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<ContractInfo>string</ContractInfo>
</urn:Zmmjf503>
</soapenv:Body>
</soapenv:Envelope>
the response message is :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header>
<n0:MessageID xmlns:n0="http://schemas.xmlsoap.org/ws/2004/08/addressing">
uuid:4cbe5b84-474c-9abe-e100-00000ad00164
</n0:MessageID>
<n1:Action soap-env:mustUnderstand="1" xmlns:n1="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope"/>
</soap-env:Header>
<soap-env:Body/>
</soap-env:Envelope>
Above response indicates that the BS called the SAP Web server successfully , but seems the service didn't get the request message.
3. The Web service can be called successfully via SoapUI . and i have checked the request message of soapUI; and it can work if i simply modify the request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
*<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>*
<soapenv:Body>
<urn:Zmmjf503 xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<ContractInfo>string</ContractInfo>
</urn:Zmmjf503>
</soapenv:Body>
</soapenv:Envelope>
and i got the correct response :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header/>
<soap-env:Body>
<n0:Zmmjf503Response xmlns:n0="urn:sap-com:document:sap:soap:functions:mc-style">
<Recmsg><![CDATA[<?xml version="1.0" encoding="utf-8"?><DocumentResponse><STATE>0</STATE><HTBH></HTBH><MESSAGE></MESSAGE></DocumentResponse>]]></Recmsg>
</n0:Zmmjf503Response>
</soap-env:Body>
</soap-env:Envelope>
4 It bother me , as the only difference between the above two request messages is the Header(the first one contains a "carriage returns"):
*<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">*
*</soap:Header>*
VS
*<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>*
5 i thought that the soap engine should ignore the "carriage returns", seems it's a problem of SAP ECC710.
DID anyone encouter this problem?? Thanks
Regards
Wen

Thanks,Patrick,
i have already removed the Soap:header, and it worked as well. what's more , using header " <soapenv:Header/>" worked.
And i got these request messages via TCPMON, so it's exactly what were sent to SAP ECC710.
The HTTP request which cannot work:
POST /sap/bc/srt/rfc/sap/zmmjf_503/400/zmmjf_503_service/zmmjf_503_soapbinding HTTP/1.1
Content-Type: text/xml; charset=utf-8
Authorization: Basic enpoZmhlOnBhc3N3b3Jk
SOAPAction: ""
Transfer-Encoding: chunked
User-Agent: Java1.6.0_05
Host: 10.208.1.100:8000
Accept: text/html, image/gif, image/jpeg, */*; q=.2
Connection: Keep-Alive
017a
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header><soapenv:Body><urn:Zmmjf503 xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<ContractInfo>string</ContractInfo>
</urn:Zmmjf503></soapenv:Body></soapenv:Envelope>
0000
THE HTTP request which can work:
POST /sap/bc/srt/rfc/sap/zmmjf_503/400/zmmjf_503_service/zmmjf_503_soapbinding HTTP/1.1
Content-Type: text/xml; charset=utf-8
Authorization: Basic enpoZmhlOnBhc3N3b3Jk
SOAPAction: ""
Transfer-Encoding: chunked
User-Agent: Java1.6.0_05
Host: 10.208.1.100:8000
Accept: text/html, image/gif, image/jpeg, */*; q=.2
Connection: Keep-Alive
016c
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"/><soapenv:Body><urn:Zmmjf503 xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<ContractInfo>string</ContractInfo>
</urn:Zmmjf503></soapenv:Body></soapenv:Envelope>
0000
Thing is that if i just use
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>
to replace (which means i just simply remove the carriage return)
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
in the header field of OSB Test console, it can work!!!
It's really a weird issue. and it bothers me so much ;)
any suggestions?
Regards
Wen

STOP keyword replacement in SAP ECC 6.0

Similar Messages

Maybe you are looking for