Stop/start of BW 7.0 system-- how to deal with deltas when moving instance?
Dear BW guru's,
we are moving a BW 7.0 system to a new datacenter, where the R3 source systems remain the same.
What should we consider when we want to stop the system, move it, and restart the next day, when the source systems cannot be stopped?
Specifically I may need to clear the delta queues in BW before stopping and moving the system.
After the system has been installed in it's new location, can we just the delta process chains without any other action, and will it extract the delta's from source system where it left of before?
is there something I am overlooking?
thanks for tapping your collective brainpower,
-jh
Hi,
When you are miving instance and source would be on during that period then you may look for follwoing.
Stop the loads and resume the delta after movement.
If there are some jobs for fetching data in R3/ for BW data source then those needs to be stopped and rescheduled as some time those jobs define the delta in BW.
If there are pseudo delta or some hardcoding for extracting delte then need to take care of the as well.
I hope it will help.
Thanks,
S
Similar Messages
-
How to deal with images when detecting/resizing screen?
Hi there,
I am trying to learn how to detect screen resolution and
resize a flash movie to those dimensions. The one thing I'm
wondering first is, how to deal with images in the movie.
Do I need a variety of different movie sizes that I serve up
depending on the resolution, or is there some way of linking to
higher rez image that can be scaled down to fit the screen?
Thanks!as far as I know this has always been a bit of an issue when
using
images inside a scaled movie. If you display a high res image
inside a
scaled down movie, flash can't "reoptimize" it so the image
looks
jagged. Of course the other way around is even worse..
Serving images based on the screen res could be possible if
you detect
it using javascript but could be a night mare to maintain and
test it...
I guess the questions I would ask myselkf are:
1. what is my audience? What resolution the majority of them
will have?
2. Is there anyway I can keep the image size fixed, and scale
to fit he
rest of the design?
3. How much time do I have to implement the customized
version?
It really depends on your project..but to answer to your
quuestion yes
you can detect.
http://www.pageresource.com/jscript/jscreen.htm
and your flash will have to interpret and load images from
different
directories based on the var passed -
How to deal with NULL when using OCI
I tried to select some data from a table, and some of them are
null.
Can anybody tell me how to deal with the null value?
Thanks!See the documentation on 'indicator variables'. This is the
correct way of dealing with reading and/or writing NULL data
for a table. -
How to deal with security when migrating application from weblogic 5.1 to weblogic 6.1?
Dear All,
I have one statement int weblogic 5.1 weblogic.propertis as follow,
weblogic.security.realmClass=com.tbcn.security.realm.TestRealm
but after converting to weblogic 6.1 there are no corresponding statement in
the file config.xml. And when i start the new application, error occured.
what should I do?
The error message is:
<2001/8/27 am 11:33:42> <Notice> <Management> <Loading configuration file
.\config\tbcn\config.xml
<2001/8/27 am 11:33:49> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initializatio
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exceptionDear Satya,
My weblogic propertis file as follow,
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=12345678
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
#weblogic.httpd.enable=false
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=/weblogic/myserver/public_html/docs51/adminhelp/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
# TBCN EJB PROPERTIES
weblogic.ejb.deploy=\
C:/weblogic/myserver/AccountSB.jar, \
C:/weblogic/myserver/AddressEntryDet.jar, \
C:/weblogic/myserver/AddressEntry.jar, \
C:/weblogic/myserver/Affiliate.jar, \
C:/weblogic/myserver/ContactPerson.jar, \
C:/weblogic/myserver/ContactSB.jar, \
C:/weblogic/myserver/Factory.jar, \
C:/weblogic/myserver/FactorySups.jar, \
c:/weblogic/myserver/LoginUsers.jar, \
c:/weblogic/myserver/Member.jar, \
c:/weblogic/myserver/MemberQuotaUsage.jar,\
c:/weblogic/myserver/MemberToCategory.jar,\
c:/weblogic/myserver/Organization.jar, \
c:/weblogic/myserver/Person.jar, \
c:/weblogic/myserver/QuotaType.jar,\
c:/weblogic/myserver/Registration.jar, \
c:/weblogic/myserver/TempAccounts.jar, \
c:/weblogic/myserver/TempDomain.jar, \
c:/weblogic/myserver/UserAccount.jar, \
c:/weblogic/myserver/UserRole.jar, \
c:/weblogic/myserver/BuyerProducts.jar, \
c:/weblogic/myserver/Catalog.jar, \
c:/weblogic/myserver/Categories.jar, \
c:/weblogic/myserver/CategoryToCategory.jar, \
c:/weblogic/myserver/CountryToCategory.jar, \
c:/weblogic/myserver/InvitedMember.jar, \
c:/weblogic/myserver/ProductOrigin.jar, \
c:/weblogic/myserver/ProductOtherFee.jar,\
c:/weblogic/myserver/ProductSups.jar, \
c:/weblogic/myserver/Products.jar,\
c:/weblogic/myserver/ProductToCategory.jar, \
c:/weblogic/myserver/SecondaryQcEntry.jar, \
c:/weblogic/myserver/CodeClass.jar,\
c:/weblogic/myserver/ConfirmationSB.jar, \
c:/weblogic/myserver/PurchasedPackage.jar,\
c:/weblogic/myserver/RejectReasonCode.jar, \
c:/weblogic/myserver/ServiceOrder.jar,\
c:/weblogic/myserver/ServiceOrderLog.jar,\
c:/weblogic/myserver/ServiceOrderState.jar,\
c:/weblogic/myserver/ServiceOrderType.jar,\
c:/weblogic/myserver/ServicePackageDetails.jar, \
c:/weblogic/myserver/ServicePackage.jar, \
c:/weblogic/myserver/ServicePayment.jar, \
c:/weblogic/myserver/ServiceReqSB.jar, \
c:/weblogic/myserver/TAM.jar, \
c:/weblogic/myserver/SubscriptionEB.jar, \
c:/weblogic/myserver/PostingCategoryEB.jar, \
c:/weblogic/myserver/PostingBrowsedEB.jar, \
c:/weblogic/myserver/PostingInfoEB.jar, \
c:/weblogic/myserver/TransactionLogEB.jar, \
c:/weblogic/myserver/PostingSB.jar
#weblogic.ejb.deploy=\
# d:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# d:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# d:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# d:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# d:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# d:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# d:/weblogic/myserver/ejb_subclass.jar, \
# d:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
weblogic.httpd.register.beanManaged=\
examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=d:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
# This property is an ACL that specifies the users who can
# create dynamic connection pools:
#weblogic.jdbc.connectionPoolcreate.admin=joe,jill
# Read more about setting up and using connection pools in the
# developers guide for WebLogic JDBC at:
# http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#T5a
# TBCN JDBC CONNECTION POOL MANAGEMENT
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@202.109.102.151:1521:tbcn,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=2,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=tbcn;password=ca91768
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
weblogic.jdbc.TXDataSource.oracleDataSource=oraclePool
weblogic.jdbc.DataSource.oracleReadOnlyDataSource=oraclePool
# WEBLOGIC DEMO CONNECTION POOL PROPERTIES
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# This connection pool uses the sample Cloudscape database shipped
# with WebLogic. Used by the EJBean, JHTML, JSP and JMS examples.
# Uncomment to use:
#weblogic.jdbc.connectionPool.demoPool=\
# url=jdbc:cloudscape:demo,\
# driver=COM.cloudscape.core.JDBCDriver,\
# initialCapacity=1,\
# maxCapacity=2,\
# capacityIncrement=1,\
# props=user=none;password=none;server=none
# Add a TXDataSource for the connection pool:
#weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.demoPool=demoPool
# Add an ACL for the connection pool:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.demoPool=everyone
# WEBLOGIC HTTP SERVLET PROPERTIES
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
# WebLogic offers different types of servlets for various uses.
# Classpath servlet registration
# The ClasspathServlet is used to serve classes from
# the system CLASSPATH. It is used by applets to load
# classes they depend upon, and is registered against
# the virtual name 'classes' here by default. This means
# you should set your applet codebase to "/classes".
# You can register multiple virtual names for this servlet.
# Note that it can also be used to serve other
# resources/files from the system CLASSPATH.
# Don't confuse the ClasspathServlet with the ServletServlet. The
# ClasspathServlet is used for serving classes for client-side Java only.
# The ServletServlet is used to invoke unregistered servlets.
# See the Administrators Guide "Setting up WebLogic as an HTTP server"
# http://www.weblogic.com/docs51/admindocs/http.html#classfile for more
info.
weblogic.httpd.register.classes=weblogic.servlet.ClasspathServlet
# We also set an open ACL for everyone to call the ClasspathServlet
# so that applets work without requiring further changes.
weblogic.allow.execute.weblogic.servlet.classes=everyone
# File servlet registration
# FileServlet searches below the documentRoot for the requested file
# and serves it if found. If the requested file is a directory,
# FileServlet will append the defaultFilename to the requested path
# and serve that file if found.
weblogic.httpd.register.file=weblogic.servlet.FileServlet
weblogic.httpd.initArgs.file=defaultFilename=index.html
weblogic.httpd.indexFiles=zh_TW/index.htm
# ServerSideInclude servlet registration
# SSIServlet searches below the documentRoot for the
# requested .shtml file and serves it if found.
weblogic.httpd.register.*.shtml=weblogic.servlet.ServerSideIncludeServlet
# Example URL: http://localhost:7001/portside/welcome.shtml
# for the file /weblogic/myserver/public_html/portside/welcome.shtml
# PageCompileServlet (used by JHTML)
# See the information below under WebLogic JHTML
# JSPServlet (used by JSP)
# See the information below under WebLogic JSP
# ServletServlet registration
# Allows unregistered servlets in the servlet classpath (see Servlet
# reload properties below) to be r -
How to deal with delta queue when importing Support Package/Kernel Patch
Hi,
From my experience, when importing a Support Package for an installation, the system will issue an error message and get stuck if this Support Package is about to alter the structures used in delta loads.
But I would like to double with you if there is possible that the support packet which is going to alter structure, but no error message. If so, the delta data will be lost.
Do we need to clear down the delta queue every time we import support package?
Anyway, is there anyone have any suggestions or steps regarding this question?
Many Thanks
JonathanHi,
Delta queues during support package upgrade
Its always better to drain the delta queues before an upgrade.
As a standard practice we drain the delta queues by running the IP/ chain multiple times.
As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
See SAP Notes 506694 and 658992 for more details.
Page 17
Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
The SAP BW Service SAPI, which is used for internal and BW to BW data mart extraction, is
upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
upgrade to avoid any possibility of data loss.
upgrade preparation and postupgrade checklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/3221895#3221895
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
/thread/804820
Effect on BW of R/3 Upgrade
How To Tackle Upgrades to SAP ERP 6.0
/people/community.user/blog/2008/03/20/how-to-tackle-upgrades-to-sap-erp-60
Start with the Why Not the How When You Upgrade to SAP ERP 6.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008dddd1-8775-2a10-ce97-f90b2ded0280
Rapid SAP NetWeaver 7.0 BI Technical Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2b3a272-0b01-0010-b484-8fc7c068975e
Hope this helps.
Thanks,
JituK -
Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
HelenHi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat -
How to deal with dynamic IP address changes
I have installed Fodero C3 and Oracle 10g successfully. Oracle 10g use web OEM console to manage database. However, my internet provider only provided me a dynamic IP address. When I installed Fedora C3, Linux server automatically picked a Hostname like " ip12-345-678-90.dc.dc.cox.net". After I created database, all database files also used this hostname. Then Oracle web OEM console worked fine. Due to the dynamic IP address assigned by ISP, their DHCP server changed the first part of IP address(ip12-345-678-90)frequently to another one. After IP address changed, I couldn't start up web OEM console and listener because they couldn't find correct hostname (IP address). I have talked to my ISP. It seems that it can not be solved. Anyone knows how to deal with this problem through 10g and OEM console themseleves. I also think about to configure Linux server to solve the problem. I really need your help. Thanks in advance
Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.
-
How to deal with file(for example .xml)? what format of dir should be?
I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal -
i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?yes, look for a cheaper component...
Or write your own...
Or save up until you can afford the more expensive ones... -
How to deal with the growing table?
Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?junez wrote:
Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?Uh, well, yes if you continually add rows to a table the table will grow ... sooner or later you will want to delete rows that are no longer needed. What did you expect? You have to decide what the business rules are to determine when a row can be deleted, and make sure your design allows for such rows to be identified. This is called ..... analysis and design. -
I am storing text messages in a PropertyResourceBundle as follows
txt_EmailAdd = {mel ADres
txt_Password = pasvDR
I made the above file in MSword using hindi fonts
The folllowing text is supposed to be in hindi
{mel ADres
pasvDR
but it does not show the text in hindi it still shows in English but when I open the above text file in MSword it shows the text in hindi
Please tell me how to deal with this problem . I hope you people reply as eaarly as possible.
I also have another prob, I am developing a website using jsp+servlet now I have made the above mentioned property file and stored it in c:\tomcat5.0\webapps\emailreadersevice\IndexMessagesBundle.properties
but when I access it from my application's index.jsp file Tomcat gives me following exception
java.lang.NullPointerException
java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:714)
java.util.ResourceBundle.getBundle(ResourceBundle.java:579)
org.apache.jsp.index_jsp._jspService(index_jsp.java:55)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
My index.jsp file is stored in c:\tomcat5.0\webapps\emailreaderservice\index.jsp
In my index.jsp file i have written the following statement to get the IndexMessagesBundle but tomcat gives me the above exception.
ResourceBundle IndexMessages = ResourceBundle.getBundle("IndexMessagesBundle",currentLocale);
Please guide me abt how to go abt it. Also tell me whether I am doing the right thing or not. If no then please tell me the right steps to followHi one_dane
I have made the property file using hindi fonts to type the following thing
{ m e l A D r e s
p a s v D R
No the above values are not place holders Infact in order to type EmailAddress and Password in hindi I had to type the above keys. so when I put system.out.println in my jsp page it does not display any hindi text but the above keys which i used to type in order to display hindi text in my txt file.
But I think i am not going on the right track should i type the unicode values for hindi text which is of the form \udddd in my property file. I have the unicode chart for hindi fonts so I can look up the chart and type appropriate unicodes(\udddd) to display Email Address and Password in hindi. Or am i still not getting how to do it? If not then please tell me how did you create your hindi property file. Is the following that you typed in your property file or is it the output of converting your property file into unicode using native2ascii
title=\u090f\u0926\u0938\u093e \u092a\u0917\u0932\u094d\u0917 \u0942\u093e\u0902\u0942JSP i18n issues
Please reply as soon as possible and hanks a lot for your help.
Eagerly waiting for a reply,
Heti shah -
How to deal with conflict and potential conflict classes?
Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors. -
How to deal with this problem?
How to deal with this problem?
We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
I want to know, in this situation, should I discard most of the existing scripts?
Are there any other solutions?Allowing writes from both cache & DB is possible with its own set of issues.
The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache. -
How to deal with java integrity??
Hi everyone,
it's just few months that I have started to use Java and since, I've been really confused how to use it. As I've been using C++ before, it's really easy for me to handle a few libraries and keywords and write every thing all by my own. But in Java, TOOOO many libraries and keywords all with different procedures and different cases that really bothers me and I can't understand how to deal with all these. As an example, When I just want to start and write a program, I start searching the net and wow. too many different classes and different Keywords that I get too confused and I prefer not to continue. Would someone please help me and tell me how to find a solution for this essential problem???asker wrote:
I've been using C++ before
But in Java, TOOOO many keywords Really? C++ has 63 keywords:
asm
auto
bool
break
case
catch
char
class
const
const_cast
continue
default
delete
do
double
dynamic_cast
else
enum
explicit
export
extern
false
float
for
friend
goto
if
inline
int
long
mutable
namespace
new
operator
private
protected
public
register
reinterpret_cast
return
short
signed
sizeof
static
static_cast
struct
switch
template
this
throw
true
try
typedef
typeid
typename
union
unsigned
using
virtual
void
volatile
wchar_t
while while Java has 52, 2 of which (goto and const) are not used:
abstract
assert
boolean
break
byte
case
catch
char
class
const
continue
continue
default
do
double
else
enum
extends
final
finally
float
for
for
goto
if
implements
import
instanceof
int
interface
long
native
new
package
private
protected
public
return
short
static
strictfp
super
switch
synchronized
this
throw
throws
transient
try
void
volatile
while -
Move of mailbox with over 30K of folders fails, how to deal with this.
Hello all,
I'm in the process of moving all Exchange 2010 mailboxes to newly created databases located on new storage.
Every mailbox except one moved successfully, the "problem" mailbox keeps failing and I need some advise on how to deal with this.
The mailbox that keeps failing is only 4 GB but has over 30K of folders that the users created manually over the years.
They are unable to easelly delete folders as they have created many sub folders within the folders.
I posted a part of the failed move request log below.
Can anyone advise on how to solve this?
Thanks in advance.
21-2-2015 18:15:13 [EXHUB1] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=7574]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=360][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropWriteStream [45]
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropSaveChangesMessage [12]
Lid: 17082 ROP Error: 0x4DA
Lid: 18273
Lid: 21921 StoreEc: 0x4DA
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSaveChangesMessage [12]
Lid: 27420 dwParam: 0xE1F000B
Lid: 36537 dwParam: 0xE1F000B
Lid: 5587 StoreEc: 0x8004010F PropTag: 0xE1F000B
Lid: 33375 StoreEc: 0x8004010F
Lid: 27420 dwParam: 0x806684B0
Lid: 36537 dwParam: 0x806684B0
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x806684B0
Lid: 64931 StoreEc: 0x8004010F
Lid: 46509
Lid: 40193 StoreEc: 0x8004010F
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 64319 dwParam: 0x5000
Lid: 39743 dwParam: 0x6730
Lid: 45016 StoreEc: 0x4DA
Lid: 57304
Lid: 5041 StoreEc: 0x4DA
Lid: 4465 StoreEc: 0x4DA
Lid: 6926 StoreEc: 0x4DA
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 21457
Lid: 19665 StoreEc: 0x4DA
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.SortMessages(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (a4966c13-778a-4d70-9087-f077e2523f66)
Key: FEF1D04E070AB74A99B809B7797674AE000000000000000000000000000000009B5540B45B37774CAB84806C1964B598
SyncStateLength: 27050362
21-2-2015 18:15:13 [EXHUB1] Relinquishing job.Hi,
Based on the description, please run the following commands to check if there are any message limit size. Try to increase the limit size then move this mailbox.
Get-mailbox –identity “user name” | fl MaxSendSize,MaxReceiveSize
Get-transportconfig | fl MaxSendSize,MaxReceiveSize
Get-transportrule | fl MessageSizeOver
Get-sendconnector | fl MaxMessageSize
Get-receiveconnector | fl MaxMessageSize
Note: Once we increased the value we need to wait for the AD replication and cache to be cleared and then test the move mailbox.
If this doesn’t work, please try to move mailbox with the skip corrupted items. This will skip the corrupted items and move only the good items to the target mailbox.
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/5383a826-4383-4b26-a503-2c3bb635f9d2/mailbox-move-to-exchange-2010-fails-for-mailboxes-over-23-gb?forum=exchangesvrdeploylegacy
Best Regards.
Maybe you are looking for
-
HT1386 can you have 2 iphones on same computer
My partner already has an iphone and itunes set up on our laptop. I now have a new iphone but when I plug it into laptop it brings up my partners itunes. Is it OK to select set up new iphone, or will this erase my partners itunes details and music?
-
Hello, Expert, Could you please help me with the following problem? Thanks in advance! I have designed the matrix report (SSRS 2012) with database table structure looks like below. Week Version Count Week1 V1.1 4000 Week1 V1.2 400
-
Album covers have changed to other album covers on my phone
i have bouht some albums and songs on itunes but now all the cover pictures have changes to other album covers its really annoying and i have tryed syncing my phone with my computer (where it works perfectly )
-
Hi, On Tiger a quicktime movie would continue playing even while minimized, on Leopard however, it seems only the sound keeps playing, the picture is static. Is this intended? Its not a big deal... its just something i noticed.. Thanks
-
How to save kontakt sample files in Logic Pro X project?
Hi, I'm using Kontakt (Komplete, Native Instruments) as my samples for my midi in Logic Pro X, and my sample libraries are stored in an external hard drive which I bring around. I need to send my Logic file over to another computer which will not hav