Move of mailbox with over 30K of folders fails, how to deal with this.

Hello all,
I'm in the process of moving all Exchange 2010 mailboxes to newly created databases located on new storage.
Every mailbox except one moved successfully, the "problem" mailbox keeps failing and I need some advise on how to deal with this.
The mailbox that keeps failing is only 4 GB but has over 30K of folders that the users created manually over the years.
They are unable to easelly delete folders as they have created many sub folders within the folders.
I posted a part of the failed move request log below.
Can anyone advise on how to solve this?
Thanks in advance.
21-2-2015 18:15:13 [EXHUB1] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=7574]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=360][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropWriteStream [45]
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropSaveChangesMessage [12]
Lid: 17082 ROP Error: 0x4DA
Lid: 18273
Lid: 21921 StoreEc: 0x4DA
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSaveChangesMessage [12]
Lid: 27420 dwParam: 0xE1F000B
Lid: 36537 dwParam: 0xE1F000B
Lid: 5587 StoreEc: 0x8004010F PropTag: 0xE1F000B
Lid: 33375 StoreEc: 0x8004010F
Lid: 27420 dwParam: 0x806684B0
Lid: 36537 dwParam: 0x806684B0
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x806684B0
Lid: 64931 StoreEc: 0x8004010F
Lid: 46509
Lid: 40193 StoreEc: 0x8004010F
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 64319 dwParam: 0x5000
Lid: 39743 dwParam: 0x6730
Lid: 45016 StoreEc: 0x4DA
Lid: 57304
Lid: 5041 StoreEc: 0x4DA
Lid: 4465 StoreEc: 0x4DA
Lid: 6926 StoreEc: 0x4DA
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 21457
Lid: 19665 StoreEc: 0x4DA
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.SortMessages(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (a4966c13-778a-4d70-9087-f077e2523f66)
Key: FEF1D04E070AB74A99B809B7797674AE000000000000000000000000000000009B5540B45B37774CAB84806C1964B598
SyncStateLength: 27050362
21-2-2015 18:15:13 [EXHUB1] Relinquishing job.

Hi,
Based on the description, please run the following commands to check if there are any message limit size. Try to increase the limit size then move this mailbox.
Get-mailbox –identity “user name” | fl MaxSendSize,MaxReceiveSize
Get-transportconfig | fl MaxSendSize,MaxReceiveSize
Get-transportrule | fl MessageSizeOver
Get-sendconnector | fl MaxMessageSize
Get-receiveconnector | fl MaxMessageSize
Note: Once we increased the value we need to wait for the AD replication and cache to be cleared and then test the move mailbox.
If this doesn’t work, please try to move mailbox with the skip corrupted items. This will skip the corrupted items and move only the good items to the target mailbox.
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/5383a826-4383-4b26-a503-2c3bb635f9d2/mailbox-move-to-exchange-2010-fails-for-mailboxes-over-23-gb?forum=exchangesvrdeploylegacy
Best Regards.

Similar Messages

Can anyone give me advice on how to deal with a corrupted itunes movie rental?

Can anyone give me advice on how to deal with a corrupted itunes movie rental? I tried to download a movie and have been continuously trying to download it through the "check for available downloads" option, but it will not download.

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with moving around like in gta2?

Hi there,
I'm programming an game but i was wondering how to deal with moving around like in gta2.
my game is also top-down with you(tha player) constantly in the middle of the screen. I know how to deal with button press etc.. but how to calculate how manny pixels the map has to move in the x and y axis...
It's difficult to explain for me.. but hope the picture is clear..
greetings

I was afraid for this one already.. the picture is not clear:) thanx for your response so far.. I will try again.. with the game gta2 in mind:)
see this screenie: http://www.vollversion.de/bilder/705_1_full.jpg
My game looks the same as gta2 top down... with the character in the middle of the screen(the one firing the flame thwower )(the player). if i press up he walks towards the police car.. if i press left or right.. he only turns around(an combination of pressing up and left is also posible) thus the character walks in the direction he's facing.
Now i would like to know how did they do this? how to programm such a movement? Because the character is standing constnatly in the middle of the screen the map has to move like in almost every game... how to calculate the x and y axis movement of the map?
Please.. try agian.. hopefully the screenie will help.

How can I store my video footage in one library? Currently I have video clips in itunes, iphoto, movies folder, imovie, imovieHD... probably some duplicates, How can I clean this up?

Currently I have video clips in itunes, iphoto, movies folder, imovie, imovieHD... probably some duplicates, How can I clean this up?

Yeah, this is frustrating for me, too. I tried a few different variants: keeping everything in Aperture, keeping only videos in iPhoto, keeping videos in Movies folder, etc. Reason being I'd like to be able to sync some videos back to the iPhone will keeping access available for iMovie - which is tougher than it should be. Now that the iPhone does HD videos, Apple needs to either adjust iPhoto to work with videos better or work with iMovie to actually function as a movie database as well as editor.
For now, I, too, have my stuff strewn about on my Mac but I'm trying to consolidate as much as I can into iMovie events on an external drive. I have a bunch of video clips of my 2 year old and I've decided to just group them by year and then put together an edit of each to then put into iTunes so I can view them on AppleTV as well as sync to my iPhone. I figure I won't ever sit down and watch every single clip so I might as well put together the "highlights".

I have a mobleme account and an existing iweb website. I would like to create a second website with a registered domain name. How do I do this?

I have a mobleme account and an existing iweb website. I would like to create a second website with a registered domain name. How do I do this?

All you need to do is create your second site in iWeb, move it to the top of lhe list of sites in the left hand pane and publish to your MobileMe account. You must make sure the second site has a different name from the first.
Then setup domain name forwarding to the second site following Apple's instructions here: iWeb: Using your own domain name. You will need to setup forwarding at your domain name provider also.
The key is that the second site (with the domain name) must the top top size in iWeb.
Note: with MobileMe scheduled to be discontinued on June 30, 2012, you might begin looking into obtaining another host. When you do you'll find that both sites will need to have a domain name.
When the time comes take a look at HostExcellence.com. I've had excellent results with it. They have a couple of packages that offer free domain names. And most important they have outstanding 24/7, ear-to-ear customer support.
OT

How to deal with images when detecting/resizing screen?

Hi there,
I am trying to learn how to detect screen resolution and
resize a flash movie to those dimensions. The one thing I'm
wondering first is, how to deal with images in the movie.
Do I need a variety of different movie sizes that I serve up
depending on the resolution, or is there some way of linking to
higher rez image that can be scaled down to fit the screen?
Thanks!

as far as I know this has always been a bit of an issue when
using
images inside a scaled movie. If you display a high res image
inside a
scaled down movie, flash can't "reoptimize" it so the image
looks
jagged. Of course the other way around is even worse..
Serving images based on the screen res could be possible if
you detect
it using javascript but could be a night mare to maintain and
test it...
I guess the questions I would ask myselkf are:
1. what is my audience? What resolution the majority of them
will have?
2. Is there anyway I can keep the image size fixed, and scale
to fit he
rest of the design?
3. How much time do I have to implement the customized
version?
It really depends on your project..but to answer to your
quuestion yes
you can detect.
http://www.pageresource.com/jscript/jscreen.htm
and your flash will have to interpret and load images from
different
directories based on the var passed

My iPod Classic is synced with an old iTunes account. How can I transfer this music to my new iTunes account?

My iPod Classic is synced with an old iTunes account. How can I transfer this music to my new iTunes account?

If you purchased all of the songs through itunes store, please follow these steps:
1. Open up Itunes and Click on Itunes Store
2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again.

How to deal with bigdecimal in DataProvider getValue method

Dear Sir/Madam
Trying
employeeDataProvider.getValue("EMPLOYEE.NUMBER0")
gives an error .
My Database is Oracle. EMPLOYEE.NUMBER0 is NUMBER(5).
Databound shows EMPLOYEE.NUMBER0 to be bigdecimal.
please advise how to deal with bigdecimal to be able to execute
employeeDataProvider.getValue successfully.
Thanks a lot for your kind assistance
Salah Beidas

employeeDataProvider.getValue("EMPLOYEE.NUMBER0")
gives an error .What is the error? Does red x appears in the margin in the Java source editor? If so, when you place the curson over the red x, the tooltip shows the error. What does it say.
Is it a runtime error? Does a page show with a stacktrace? If so, what is the error? When you look at the stack trace do you find your page mentioned anywhere. If so, it shows a line number. What does that code look like (that is pointed to by the line number)?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

My ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

http://support.apple.com/kb/HT1808

How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

Move of mailbox with over 30K of folders fails, how to deal with this.

Similar Messages

Maybe you are looking for