Stop the test when out of records

Hi,
Is it possible to stop the whole test-run when a script runs out of db-records?
Otherwise, it would be a good feature in future versions.
Regards,
Axel

If you use that "When out of records: stop the user" setting, then every user who requests a new record will stop, so the test will end gracefully as each user realizes it needs to stop at the end of it's iteration. This assumes you are requesting a new db record at the start of each iteration of the run section.
If your script is not configured to request a new record at the start of each iteration, then you will need to add some extra DB check in the script. How is your script configured to request new DB records? If you need some type of force abort of all virtual users, there are other possible options for coding into your script. Though to directly answer your question, there is no OATS Controller setting which specifically stops the entire test when the databank runs out of records.

Similar Messages

Can't stop the music when I leave the page.

Hi all;
I keep posting in the wrong area. Sorry. I did this post in AC2 and the answers didn't look right. So, here I am again.
I'm building a website in flash using my limited understanding of action script. Everything was progressing very well until I found that if I go to one of my example pages of my web site and play the flash video (with audio) and click back to my "home" button, the audio will continue to play. If I go back to the example page, the video is off and when I start the video, it plays again with the other audio. I hear the audio twice! I know there is an action script to handle this but, I can't figure it out.
My question is, How do I stop the audio when I click away from the example page back to the home page or any other page?
Thanks in advance for your help.
I'm using Flash CS4 and a Mac OS operating system.
Did I mention that I'm not very good with action scrupt but, I'm so close to finishing this web site.

assign your component an instance name (if it doesn't already have one), eg flv and in the frame that contains that component add:
flv.addEventListener(Event.REMOVED_FROM_STAGE,removedF);
function removedF(e:Event):void{
flv.stop();

Is it possible to stop the system time outs on my imac ,i have tried 5 times in the last 24 hrs.each time it will go for maybe 3hrs and then times out.each time i have to start the download all over again,thanks,

is it possible to stop the system time out on my imac? i have tried 5 times in the last 24 hrs.it will run for approx.3hrs,and then times out and i have to start
from the beggining again

What is the url of the file your are downloading?
What web browser are you using?
What type of connection do you have to your isp? phone line, dsl, cable, fios...
Try iCab. It lets you restart a download.
icab.de
Robert

Im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

I find that if you have multiple 3d object they must be merged into a single 3d layer their positions reset to align to the same axises then sized and positioned along them. The layer should then be able to be animated well around an axis like the y axis. Here a Sphere, Cylinder and ring. http://www.mouseprints.net/old/dpr/McAssey-CC.mp4

HT4064 how to do you stop the issue when you have to click several times on your ipad to get into anything?

how to do you stop the issue when you have to click several times on your ipad to get into anything?

I think you have enabled VoiceOver; turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

Stopping the VI when running a infinite simulation loop

Hi,
This is my first time on this forum and for that matter, I started with Labview a few months back. I am developing a standalone application for servo motor control through USB 6211. The motor control was completed and I created a DLL which I could run through VC++. My application requires me to call this DLL or an EXE based on this VI repeatedly with direction, velocity and angle parameters and the remainder of the program depends on the finishing of this executable.
The issue was that the VI did not stop execution after the motor was turned off, I suppose due to the simulation loop. I tried using the abort execution block but was advised to avoid doing so. My next step was to move all the DAQ assistant blocks into a while loop and couple the motor ON/OFF control with the stop button. But this hasn't helped either. I am attaching the VI and the SubVI here. I went through the board but did not come across a query involving a simulation loop. Any suggestions?
Attachments:
rotate.vi ‏551 KB
Velocity_Con.vi ‏430 KB

Hi Vivek!
Thank you for contacting National Instruments. From the information you have provided here, along with the attached VIs, I would agree that it is the simulation loop that is causing the problems when stopping the VI. It looks like you are using the LabVIEW Simulation Module.
When using these loops there are two primary ways of stopping their execution. The total simulation time can be controlled from the input node, the box at the upper left of the loop, or the Halt Simulation VI can be used from within the Utilities palette. I would suggest taking a look at the detailed help for the simulation loop in order to better understand the methods of stopping this execution. As you mentioned it is always good programming practice to avoid using the abort button because this can result in open references being left without any programmatic resolution.
I hope this helps! Let me know if there is anything else I can help with or clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

Using the internet when out of town

what is the best way for me to access the internet on my macbook while I am out of town?

Hi from Canada - though I travel to Ireland and England frequently. [Sorry this has turned out to be so long, but I hope you find it useful]
Well a few more thoughts for you both:
Airport Extreme Base Station:
This is used to create a wireless network - for us, probably at home, by connecting it with an Ethernet cable to the cable router you have installed already. Then the AirPort in your MacBook Pro will connect (wirelessly) to the base station and then on to the internet. It means you can use the internet anywhere at home.
So you dont need it for travelling! Your MacBook has all it needs to connect to the internet - either with an Ethernet cable (well, I guess you'd have to take one with you - it's a good idea to have one in your laptop case anyway) or wirelessly via AirPort.
UK Airports - well any airport really
Usually the system is that you can buy a wifi access card - in Dublin it's €5 for an hour. This is like a scratch card, you scratch to get a username and password. Then you switch on AirPort and select the network in the list that drops down. I guess in Scotland it might be BT.
I suspect that all providers are created equal - though some may be more equal than others. It's really all to do with how much they charge.
In a café:
There are many cafés, hotel reception areas, bars etc that will have wifi (thought they may call it wireless) access. Generally they are one of two types:
Hotspot - as soon as you start your AirPort and open your browser it will connect to the webpage of the provider where you can use your credit card to buy time. Time will be available by the minute or by the hour or day or something like that.
Café etc owned - in this case, it will either be free (you ask them for the password to join the network when AirPort asks for it) or they will sell you the password and either have a card with it on or write it down for you.
Generally, there are no accounts to set up - you just pay your money and surf!
MacBook battery:
Just one word of warning about this. AirPort seems to use up battery power very quickly, well relative to other uses of the computer. So it's a good idea to make sure you're fully charged and take along your power adaptor. In the UK it came with a reasonably long flex from the adaptor to a 3-pin plug for the wall socket. That plus the cable from the adaptor to the magsafe plug gives plenty of length to plug into any socket that may be somewhere near - if you don't have that extra length, see if your Applestore has one - or buy a second adaptor when you get to the UK.
And dont be afraid to plug in to any power socket you find yourself near either at the airport or in a café or hotel. Everyone does it and they're kind of used to it at this stage - the worst that can happen is that they ask you to unplug it!
I think that answers it all - let me know if you need anything else.
Have a great trip - it sounds wonderful.
Andrew

How do i stop the alerts when I enter new calendar events

When I enter a new event in Calendar, it automaticly adds two alerts to it. One by email and one by text message. With every event, I have to go back to the event and change both of the alerts to "none". Going to Preferences - Alerts and "Turn off shared messages in Notification Center", it does not change a thing. This didn't happen until I started Snow Leopard.
Any help would be greatly appreciated.

The Desktop and Screen Saver preference panel has two parts and the Screen Saver section has a slider bar near the bottom: set that to Never (far right).
You might also want to use the sliders in the Energy Saver preferences, particularly putting the screen to sleep. Set that to the same as the Screen Saver otherwise a yellow warning triangle may appear. These settings are not the best, of course, so you might want to change back when your viewing is finished.

How do you stop the flash player when you change pages on a web site

Hi all;
I'm building a website in flash using my limited understanding of action script. Everything was progressing very well until I found that if I go to one of my example pages of my web site and play the flash video (with audio) and click back to my "home" button, the audio will continue to play. If I go back to the example page, the video is off and when I start the video, it plays again with the other audio. I hear the audio twice! I know there is an action script to handle this but, I can't figure it out.
My question is, How do I stop the audio when I click away from the example page back to the home page or any other page?
Thanks in advance for your help.
I'm usinf Flash CS4 and a Mac OS operating system.

The problem is most likely in your Action Script. Therefore this question should be posted in the Action Script forum. This forum only deals with the Flash Player, which, in this case is running the script as it is written, and therefore, working properly.

Coded UI - Test Results/Out - The binary files are getting copied to the TestResults/Out folder

Hi,
I am using Visual Studio 2013 for developing the Coded UI Automation Scripts.
Whenever I execute a Coded UI Automation Script, the binary files are getting copied to the TestResults/Out folder.
I do not want these binary files to be copied to OUT folder, and I have tried disabling the Deployment option under Test Settings > Deployment, but still the behavior is the same.
Could you please advice, how to disable copying binary files into the Out directory.
Thanks in Advance.
Regards,
Karthick K

Hi Karthick K,
From your description, as far as I know that when we enable Tracing and HtmlLogger for Coded UI Test and then run the coded UI test, we will get the Test Results/Out folder automatically.
So it is default that the Out folder includes some files like codeduitestproject6.dll, CodedUITestProject6.pdb etc, we could not disable copying binary files into the Out directory.
However, there have a replace workaround is I suggest you can disable Tracing and HtmlLogger for Coded UI Test. After you disable the Tracing and HtmlLogger for Coded UI Test, it will not generate the Out folder.
Similarly, it will not get the binary files.
http://blogs.msdn.com/b/visualstudioalm/archive/2012/11/08/enabling-htmllogger-in-coded-ui-test.aspx
If you still want to this feature, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reducing time while Filtering Out New Records with the Same Key

Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
Sam

Hello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank

Problem in stopping the process for a while

Hi all,
I am facing problem in stopping the process when i call *.exe from java. here i am explaning my problem in detail.
main(){
m1();
m2();
m1(){
Runtime r=Runtime.getRuntime();
Process p=r.exec("solve1.exe");
// this exe file will create a text file (temp.txt), and it is creating it with out any problem.
m2(){
using temp.txt here.
problem is when i call m1() it will create temp.txt , but by the time i call m2() temp.txt is saving into the disk and m2() is not able to find the file.
here what i need is there should be some time gap to before i call m2(); and i tried even with
p.waitfor(); in m1() -if i use this the program is not exiting out of runtime??
any one kindly hepl me
bye.

A test app(if you don't have sol, then pick another app)
public class WaitForTest{
    private WaitForTest(){
        try {
            Process p = Runtime.getRuntime().exec("sol.exe");
            System.out.println("Waiting....");
            p.waitFor();
            System.out.println("Done waiting") ;
        catch(Exception e)
                e.printStackTrace();
        static public void main(String[] args){
            new WaitForTest();
}

When I am recording I can hear

When I am recording, I can hear my voice through the speakers and when I play the recording I here lots of "reverb", that is to say, It sounds like I'm speaking in an auditorium. What's going on?

We will have to know a bit more about how you have your microphone connected and what audio interface you are using before we can help you with an answer. The 'reverb' effects is probably because the sound is coming back out of the speakers when you are recording. Either turn the speakers down or listen on headphones to stop the sound going around and around.

The 'Music' app no longer remembers the place when playing Audiobooks.

I have been downloading Audiobooks from Audible to iTunes for around 10 years. I always ensure that the settings include 'remember place' before uploading them to 'Music' on (currently) my iPhone 4.
In the last few weeks this seems to have stopped working.
I selected all of my Audiobooks and applied the 'remember place' flag to all of them and connected the iPhone again to sync it.
It worked! ... Once. Second time I stopped the player, when I went back to it, it returned to where it had started the previous time; 3 hours 41 minutes. Now, every time I stop the player it returns to 3:41.
I suspect that the cause is that the 'lock screen' shows the player with the book, and always stays at 3;41, even when playing. My feeling is that this overrides the players pointer, because the minute the phone is unlocked, back it goes to 3:41.
Does anyone have any ideas how to get round this?
Many thanks
Regards
Cleonw

WORKAROUND: In iTunes, select the podcast files and hit CMD-I (show info). Set the genre to something other than "Podcast", and in the Options tab, set the Media Type to Music. You can do this to the files that are on your iPhone. If you do this to the files on your computer, they will no longer show up as Podcasts - they'll be mixed in with music files in your library. You can then put these podcasts into playlists on the iPhone, and they'll show up on the phone once it's disconnected. You might need to fool around with this a bit - try it more than once, etc. - I had some podcasts not show up on the iPhone until after a SECOND connect-and-disconnect operation with the computer. Others here might do some experimenting and figure out a smoother set of instructions that will always work - but this is a starting point.
Note that I ALWAYS "manage music and video files manually" - I NEVER "sync" music and video. Your mileage may vary.
Apple - please listen: The handling of podcasts in iOS 7 is not a feature, it's a bug. As you can tell from the comments here, MANY people need to manage podcasts as if they were music files (and sometimes, THEY ARE!!!!). The arbitrary decision to treat podcasts differently is WRONG - an audio file is an audio file. I don't need to buy one TV to watch sports and one TV to watch news - because video is video. Get it? If you want to provide a Podcasts app, that's fine, and anyone who wants to use it can do so. But don't RUIN the previous, excellent functionality that we had before, when it's completely unnecessary and a colossal pain (not to mention insult) to your customers. And in some cases, it's a serious driving safety issue.
I'll be watching this space to see if others can refine the basic workaround that I've found.
UPDATE: It appears that changing the genre is unnecessary, only the "Media Type". It's probably best to do this only to the copies on the iPhone, so the files in your computer's library are not altered.

Stopping a Test Run

Is there any way of stopping a FU4 test run that is currently in progress?
Thanks,
Brian

Here's a way to stop the test run if you're running tests with a a swf application. (based on Flexunit August release).   All of the tests that haven't run yet get marked as ignored.
I'm using this for a demo to try to show how easy it is to use flexunit.
1) StoppableNotifier: extends RunNotifier, but resets the stopped state to false when a test run is started.
This is to allow the test run to be reexecuted, if the user clicks a rerun button in the UI.
2) StoppableCore - a copy of FlexUnitCore, with these differences:
public function stopTestRun():void {     (notifier
as RunNotifier).pleaseStop();
/*** Create a new <code>FlexUnitCore</code> to run tests.
public function StoppableCore() {
//notifier = new RunNotifier();notifier =
new StoppableNotifier();
asyncListenerWatcher =
new AsyncListenerWatcher( notifier, null );
//asyncListenerWatcher.addEventListener( AsyncListenerWatcher.ALL_LISTENERS_READY, handleAllListenersReady, false, 0, true );}
3. A modified BlockFlexUnit4ClassRunner.as with runChild() modified to catch the StoppedByUserException and mark the test as ignored.
//TODO: Deal with async issues here on the notifier finish
// STOP support: if the test run should be stopped, mark the test as ignored.
try {     eachNotifier.fireTestStarted();
catch(e:StoppedByUserException) {
     // The test run has stopped - mark the test state as ignored.       eachNotifier.fireTestIgnored();
     childRunnerToken.sendResult();
     return;
4. I have a button click handler wired to call the stopTestRun() method.
5. In the mxml wrapper, an instance of StoppableCore() is used instead of FlexUnitCore.

Stop the test when out of records

Similar Messages

Maybe you are looking for