Stop until button clicked

Hi all - I'm on a deadline for a project today. I thought I
knew this program but since it changed from RoboDemo to Captivate,
I must have missed something.
I need for the movie to stop until the user clicks on a
button. Currently I have the button set for "On success: Continue".
I assumed this meant that if the user did not click the movie would
not go forward... but it does. How do you make the movie stop
completely until the button is clicked?

Hi Maureen,
RoboDemo was three to six HUGE versions ago (depending on
which version of which product you had/have). Either way, it's been
a number of years since RoboDemo. You missed
a lot and most of it is good - grin. Welcome to Captivate!!
In a way, you are right about the active/inactive line on the
button, to the extent that if the "Pause After" box is unchecked,
there will be no "active" period at all ... the button will display
at all times, but will not affect movement along the timeline.
Said differently, when the "Pause After" box is
unchecked in the button "Options" tab, it allows the movie
to progress without stopping for user interaction. The button is
there, and the Success action will occur if the button is clicked
while visible, but if nothing is done by the user, it is as if the
button were not even there.
You can compare this action to the Click Box option to "Pause
until user clicks" ... that of stopping forward progress of the
movie until an affirmative action is taken by the end-user - or
not.
Have a great day!
.

Similar Messages

When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website.pop up blocker off & in safe mode. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

How can I turn off the delivery of mail when I turn on the program. I want it wait until I click the get mail button before it brings the mail over

I do not want the program to bring over my mail until I click the get mail button. I look at my mail on my providers site and delete the item I do not want to look at before going to Thunderbird to actually read it. And I do not want to receive any mail that might come to me until I can determine if I want to read it first.

Disable 'Check for new messages at startup' in your Account Settings.

Stopping audio and starting another audio when button clicked

Hello,
I have a multiple slide document, and I want sound to stop
when they click the "Next" button, and another audio clip to start.
Here is what I have so far:
//audio
x = new Sound();
x.attachSound("Slide1");
x.start(0, 0);
musicplay = true;
forward_btn.onRelease = function() {
gotoAndStop("2");
numbering eq numbering++;
So I just want it to play audio clip "Slide2" when they click
forward_btn, and I want "Slide1" to stop.
Thanks!

Attach your second sound file to the frame that will play the
second sound. Then try adding stopAllSounds() before the
gotoAndStop("2"); to get the first sound to stop playing and then
play the second sound.

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound

How can I get a stop/start button the multimedia flash player in Acrobat 9 pro

I have successfully embedded a flash movie in my pdf. It starts when I click on it but does not stop until I reloaded the pdf. Is there a way to add stop start buttons?

There is not currently a shortcut for this. That's a good feature request, though. You can submit feature requests here.

AWT start/stop bundle buttons Help needed.

Hello,
I need help getting start/stop buttons on my AWT Class to take the action of methods from an other class. I will give anybody who can figure this out ALL OF MY Duke Dollars. (I shortend it up to the important stuff so that there isn't too much to read):
MY PROBLEM: I need to have my Gui user interface to start up first. Then when somebody clicks the Gui class "start" button, it will call the start method of my Activator class and similiarly for the "stop" button. When I run the program, it starts up already in "start" mode. It should start up without getting the service (stop mode) and then get it once "start" is pressed" Hopefully somebody can help me figure this out.
First, I have the following AWT class
public class Gui extends Frame{
      Frame f;
      MyImage imagePanel;
      Button button_start;
      Button button_stop;
      Label statusBar;
      Panel btns;
    public Gui() {
        addWindowListener(new WinClosing());
        setLayout(new BorderLayout());
        imagePanel = new MyImage();
        btns = new Panel();
        button_start = new Button("START");
        button_stop = new Button("STOP");
        btns.add(button_start);
        btns.add(button_stop);
        add("North", btns);
        add("Center",imagePanel);
        button_start.addActionListener(new ActionListener(){
            public void actionPerformed( ActionEvent e ){
                imagePanel.getImage();
        button_stop.addActionListener(new ActionListener(){
            public void actionPerformed( ActionEvent e ){
            imagePanel.closeImage();}
        });          }Then I have the Activator class:
public class Activator implements BundleActivator {
     public ServiceReference reference;
     public void start(BundleContext bc) {
         reference = bc.getServiceReference(GpsService.SERVICE_NAME);
         if (reference == null) {
         System.out.println("User could not get a service.");
          } else {
         AnyService anything = (AnyService) bc.getService(reference);
                UserClass user = new UserClass();
                user.startup(anything);
public void stop(BundleContext bc) {
    if (reference != null) {
    bc.ungetService(reference);
    reference = null;
    System.out.println("User has released its Service.");
    } }}Then this previous class calls the startup method for this class:
public class Driver {
        public void startup(AnyService any){
        double any = any.getValue();
        System.out.println(any);
        Gui g = new Gui(any);
        g.setSize(714, 480);
        g.setVisible(true);
      }}Thanks in advance!

Hmm, it's quite hard to imagine what's going on without the code for MyImage. However, I guess you need to add an ActionListener to your two buttons. Are you sure you need two buttons, though? Presumably you can't stop until you've started and vice versa?
private Activator activator;
private Button startButton;
private Button stopButton
public Gui()
startButton = new Button("Start");
stopButton = new Button("Stop");
stopButton.setEnabled(false);
startButton.addActionListener(new ActionListener()
    public void actionPerformed(ActionEvent e)
      start();
stopButton.addActionListener(new ActionListener()
    public void actionPerformed(ActionEvent e)
      stop();
private synchronized void start()
// Construct the Activator when we need it
if(activator == null)
    activator = new Activator();
activator.start(...); // Don't know where you get your BundleContext from!
startButton.setEnabled(false);
stopButton.setEnabled(true);
private synchronized void stop()
activator.stop(...); // Don't know where you get your BundleContext from!
startButton.setEnabled(true);
stopButton.setEnabled(false);
}I'm assuming here that once the Activator is "started" is stays started until it is told to stop, ie, it doesn't stop itself after a finite amount of time.
Hope this helps.

ITunes sync seemingly stops until a device eject is threatened

Sometimes, with some devices, iTunes seems to stop syncing (e.g., gets stuck for several minutes at "2 of 46...") until I click the device's eject button in the iTunes sidebar. At that point, the confirmation dialog appears, and the counter/file copying continues. I can cancel the eject, and things continue syncing for a while, but then they get stuck again, so I threaten another eject, etc. It's happened primarily with one iPod and occasionally with my iPad. Why would this happen, and why would threatening but canceling an eject kick it back into gear? Anyone else experience anything like this? The workaround obviously allows me to sync, but it's a pain to have to do this.

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
next See:
iOS: Device not recognized in iTunes for Windows
I would first try
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Also try new cable and different USB port.

Option button click on IE is not working

I am trying to play around with Excel VBA code to select an option button on a webpage. For some reason the option button is not getting selected even though there is no errors when executing the code. Please share your thoughts.
Excel VBA code block given below.
Sub Voting()
Dim MyHTML_Element As IHTMLElement
Dim MyURL As String
Dim x As Object
MyURL = "https://www.surveymonkey.com/r/?sm=%2bZAmxFYpsYG1R61ELcYA6g%3d%3d"
Set MyBrowser = New InternetExplorer
With MyBrowser
.Silent = True
.navigate MyURL
.Visible = True
Do
Loop Until .readyState = READYSTATE_COMPLETE
Do Until Not x Is Nothing
Set x = .document.getElementById("ID of one of the option button")
Loop
Set x = Nothing
.document.getElementById("ID of one of the option button").Click
Set HTMLDoc = .document
For Each MyHTML_Element In HTMLDoc.getElementsByTagName("button")
If MyHTML_Element.Type = "submit" Then MyHTML_Element.Click: Exit For
Next
Set HTMLDoc = Nothing
End With
MyBrowser.Quit
Set MyBrowser = Nothing
End Sub

You must not be hitting the button. Please see this example.
http://vbadud.blogspot.com/2009/08/how-to-login-to-website-using-vba.html
Also, to dump everything from the site to Excel, try this.
Sub DumpData()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
URL = "http://finance.yahoo.com/q?s=sbux&ql=1"
'Wait for site to fully load
IE.Navigate2 URL
Do While IE.Busy = True
DoEvents
Loop
RowCount = 1
With Sheets("Sheet1")
.Cells.ClearContents
RowCount = 1
For Each itm In IE.document.all
.Range("A" & RowCount) = itm.tagname
.Range("B" & RowCount) = itm.ID
.Range("C" & RowCount) = itm.classname
.Range("D" & RowCount) = Left(itm.innertext, 1024)
RowCount = RowCount + 1
Next itm
End With
End Sub
Joel, who frequents these forums, gave me that a long time ago. It's server me well for many projects.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Double click in alv grid not refreshing until I click elsewhere

Hello,
I'm very new to abap and just managed to partly implement double click in an alv grid.
I also created a button that calls the exact same function as double click (selects the row and fills in the data areas on the page). When I use the button, everything works fine, but when I double click, nothing changes until I click on a tab or other form of input button on the page.
I have followed the process in debugging and can't find the fault anywhere.
My double click is implemented by:
           create object lcl_event_receiver.
           set handler lcl_event_receiver->double_click
                for search_alv_grid.
          endif.
CLASS lcl_event_handler DEFINITION.
    public section.
    methods:
    double_click         for event double_click
                         of cl_gui_alv_grid.
ENDCLASS.               "lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
*       METHOD double_click                                           *
method double_click.
perform select_search_result.
endmethod.                    "double_click
ENDCLASS.
Any help would be much appreciated

Hello,
Try using the template code given below. Let me know if you have any questions.
data : GT_EVENTS TYPE SLIS_T_EVENT.
get event
PERFORM BUILD_EVENT_TOPOFPAGE USING GT_EVENTS[].
display alv data
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = W_xxxxx
IT_FIELDCAT = GT_xxxx
IT_EVENTS = GT_EVENTS[]
TABLES
T_OUTTAB = T_xxxx
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
get event perform
FORM BUILD_EVENT_TOPOFPAGE USING LT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = LT_EVENTS.
Read double click event using the below statement
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO LS_EVENT.
IF SY-SUBRC = 0.
ENDIF.
ENDFORM. " BUILD_EVENT_TOPOFPAGE
FORM USER_COMMAND USING L_UCOMM LIKE SY-UCOMM
LS_SELFIELD TYPE SLIS_SELFIELD.
CASE L_UCOMM.
WHEN <double click>
    Perform do_something.
ENDCASE.
ENDFORM. " USER_COMMAND
Best Regards,
Krishna

Flash CS3 Play/Stop audio button problem

I made a play/stop audio button with this youtube tutorial (youtube.com/watch?v=XU6oMEFUFF8) but after the sound is finished I want the play button to show up agian.
Here is the actionscript:
import flash.events.MouseEvent;
play_btn.addEventListener(MouseEvent.CLICK,clickha ndler);
stop_btn.addEventListener(MouseEvent.CLICK,clickha ndler);
function clickhandler(event:MouseEvent):void{
swapChildren(play_btn,stop_btn);
what code should I add to my current code?
I also can send you the Fla.

You should consider using the Sound class. Here's a quick overview of it:
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7d21.html
You'll be able to add event listeners to the sound to know when it completes so you can execute more code, such as swapping the play and stop button. There is an example in that overview of listening for the SOUND_COMPLETE event (e.g. channel.addEventListener(Event.SOUND_COMPLETE, onPlaybackComplete);). It should contain everything you need.
A basic example of what you'll end up with (there's many ways to do it) might look something like this:
// just set up and wait for click
var isPlaying:Boolean = false;
var mySound:Sound = new MySoundInLibrary();
var myChannel:SoundChannel = new SoundChannel();
myChannel.addEventListener(Event.SOUND_COMPLETE, onPlaybackComplete);
// buttons
play_btn.addEventListener(MouseEvent.CLICK,clickhandler);
stop_btn.addEventListener(MouseEvent.CLICK,clickhandler);
function clickhandler(event:MouseEvent):void
          swapChildren(play_btn, stop_btn);
          if (isPlaying)
                    isPlaying = false;
                    myChannel.stop();
          else
                    isPlaying = true;
                    myChannel = mySound.play();
function onPlaybackComplete(e:Event):void
          isPlaying = false;
          swapChildren(play_btn, stop_btn);
The basic idea is keeping a flag if the audio is currently playing. If it isn't then assign the sound to a channel and play it while setting the flag (isPlaying) to true. If it's already playing, set the flag to false and stop playing the audio.
The swapChildren is run in the onPlaybackComplete() method so when the audio completes the play button is swapped back in front.
Rather than swapping the children I'd urge you to toggle the .visible property instead. It's easy to run commands in the wrong order and get desynched on depth.

Button Click Event WebPart Button Sys.Webforms.PageRequestManagerServerErrorException:

Hi,
I have a SharePoint 2010 visual WebPart, which has ASP.NET Multiview control. When deployed, this control works fine on my local server and it even works fine in the Development server; however, when deployed on to the production server, it stops working.
I am not able to change Views on the production server, when I try to debug the WebPart in IE Developer Tool (Using IE 11), I get this error that says “Sys.WebForms.PageRequestManagerServerErrorException: An unexpected error has occurred.” in the ScriptResource.axd
file.
Even the Button click is not working, getting the same error in the Button Click.
Can someone help me with this?
Regards, Vikram

Hi Hemendra,
Thanks for your help, but the problem is solved now. turns out the issue was not with the control but the page itself.
I had copy pasted the pages from my local server to the production server instead of exporting and importing it.
Once i created pages in the production server, the issue was solved.
Regards, Vikram

How to add screen elements at run time on button click in Web Dynpro abap?

Hello All,
I have a requirement wherein the user wants to add the textbox dynamically at runtime on button click action. My questions is, Is it feasible to dynamically add screen elements at runtime? If yes, how?
Please help.
Thanks

Hi Ajinkya,
This is absolutely possible! Adding view elements at runtime is called "dynamic programming". There are a lot of good resources and tutorials on SCN if you do a search. To start you off, here is an excellent series by Thomas Szücs:
Dynamic Programming in Web Dynpro ABAP - Introduction and Part I: Understanding UI Elements
Dynamic Programming in Web Dynpro ABAP - Part II: Handling ViewElements
Dynamic Programming in Web Dynpro ABAP - Part III: Aggregations and DDIC-Binding of ViewElements
Another option that avoids dynamic programming is to create the view element at design time but bind its visible property to a context attribute of type WDUI_VISIBILITY. You could initially set its visibility to "none" until the user clicks the button, then you could change its visibility to "visible".
Cheers,
Amy

How to popup a menu when rigth button clicked?

Hi, i have a mouse listener on a Jtree, it is working fine and now i want that when the user clicks in the right button of the mouse, a popUp menu appears with diferent options depending on the type of node....i only need to know how do make the menu to appear...
thanks

I have had this same problem. For me it always occurs on Mandrake (I've only tried 8.0 and 8.1), but I have never had it occur on other Linux distributions such as Red Hat or Debian.
Quick caveat: Although Sun says that this is not a
bug I have installed Java on 5 different computers
with various versions of Mandrake Linux (7.1, 8.0, and
8.1) In these installations a left click (the main
button click) will return a mouse event with a button
mask of BUTTON1_MASK + BUTTON3_MASK instead of simply
BUTTON1_MASK. This makes your popup window appear on
every mouse click instead of just right button click.
The solution (until this bug is fixed) is to see if
the int returned from the getModifiers() method on
mouse event == BUTTON1_MASK + BUTTON3_MASK and if it
does then DONT popup the window.
Oddly enough, I've had other people test this and they
tell me that the mouse events return the proper button
mask but every time I've tested it I get this bug.
Just a FYI. If you see that behavior then this is how
to fix it.

Process won't get started until 3 clicks

I have a pl/sql process attached to a button. But when I click on the button , the process
won't get started until 3 clicks.
Where can I check in the application, to clear this problem.
Thank you.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
Enter DFU mode without home button or Power Button | technoNix
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Stop until button clicked

Similar Messages

Maybe you are looking for