Store.connect passing dom\\user not dom\user
Hi all,
I am reading a properties file but I have tried to hardcode in the values. What I get is a logon exception:
javax.mail.AuthenticationFailedException: Logon failure
5.5.1960.6 (rdlcrmmail1.CRMLAB.com) ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LITERAL+ LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE AUTH=NTLM
A0 OK CAPABILITY completed.
A1 LOGIN "domain\\user" "password"
A1 NO Logon failure
Why does connect not properly pass the delimited String "\\"? Has anyone seen this before connecting to MSExchange?
Thanks for any information.
Try reading the prop into string.
Check the string by doing a sys out
see if problem exisits
Similar Messages
-
My user name and pass word have not changed I can't get into my gmail
My user name and pass word have not changed I can't get into my gmail
Can you access the email on a computer using a web browser meaning are you sure it is not a problem on the gmail end?
-
How can i connect with HR User as it is not existing
Hi this is Arslan
I need your help in one problem and this problem i am facing from very start
I have installed fresh copy of oracle 10g-2 and when I login with user HR it give following message
Error: ORA-01017 : invalid user name / password; logon denied
after this command i have executed other command
alter user hr account unlock;
then got error ORA- 01918 : USER 'HR' does not exist
again i have executed one more command
alter user hr identified by hr account unlock;
but again receive error that user HR does not exist (error ORA- 01918 : USER 'HR' does not exist)
then i have also check the hr in all_users list with command
select * from all_user
but did not find HR user in this list
can you help me so that i can connect to the hr user, also tell me why this user is not creating with the oracle installation
i have perform all above task with SYS @DBA
Regards
ArslanArsal wrote:
HI again
i did the same and got success and now i am connecting with HR user.
can you tell or any one else can tell how can i instal schema after the instalation of oracle/database.
is there any option to install schema without being uninstall oracle
Thanks and regards
ArslanA schema is simply all of the objects (tables, etc.) that belong to a particular user. You definitely don't need to uninstall oracle. That would be like tearing out the entire telephone system just to add a phone at your house.
Oracle provides some sample schemas. When you install Oracle, you have a choice of whether or not to create a starter database at installation, and whether or not to install one of the sample schemas. You can always create a new database after, and separately from, software installation. And you can always create one of the sample schemas after, and separately from, database creation.
Of course, those are just sample schemas. In the real world, you'd create your own to meet your own business needs.
More information on the sample schemas can be found at http://www.oracle.com/technology/obe/obe9051jdev/common/files/b10771.pdf
Edited by: EdStevens on Feb 11, 2009 8:35 PM -
Hi...
I cannot download in-app purchase . I'm live in Thailand and download in thai store only but i can not download in-app . My appleID name Cradit and user long time help me please . Thank youWhat happens when you try?
Any info about your issue at all? -
IChat not connecting with most users
Hi, I'm running Tiger and having trouble connecting to anyone but other Tiger users. I can't connect to PC users and I can also not connect, most importantly, with my dad who uses Panther.
As an error, it says at my end that the other computer is unavailable or unreachable something like that and then at their end it says that I canceled my request. Strange, no doubt.
I changed the Quicktime settings and did everything else in accordance with this thread, including opening the proper firewall ports (i have also tried with firewall off), I have no iChat add-ins and I connect to the internet directly to my cable modem. I had no problems under Panther.
I have an up/down speed of 187Kbps/339Kbps, according to a test I just ran. Also, my dad, the one I really want to talk to, connects with a modem, so i thought maybe his connection was just too pokey to handle it (even though it used to work fine for us), but I have the same problem with broadband users.
I have had this problem with every incarnation of 10.4.xMy dad was online tonight so I had a chance to test it out...
just says
"there was a communication error during your chat"
somewhere down in the report it says it ended with error -8
here's the first header
iChat Connection Log:
AVChat started with ID 2111358753.
adamsickmiller: State change from AVChatNoState to AVChatStateWaiting.
0x5dceb50: State change from AVChatNoState to AVChatStateInvited.
0x5dceb50: State change from AVChatStateInvited to AVChatStateConnecting.
adamsickmiller: State change from AVChatStateWaiting to AVChatStateConnecting.
adamsickmiller: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x5dceb50: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8 -
Sqlplus not connecting through application user
Hi ,
I have R12 instance
DB Version : 11.2.0.3
App Version : 12.1.1
Here i am able to connect apps user from DB user But when trying to connect from application user we are getting the below error, Please help.
From DB user :
*[oradev@dev ~]$ sqlplus apps/apps145*
SQLPlus: Release 11.2.0.3.0 Production on Sat Apr 13 23:44:32 2013*
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
From Application User :
*[appldev@dev ~]$ sqlplus apps/apps145*
SQLPlus: Release 10.1.0.5.0 - Production on Sat Apr 13 23:44:43 2013*
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name:
Regards
Rajesh THere i am able to connect apps user from DB user But when trying to connect from application user we are getting the below error, Please help.
From DB user :
*[oradev@dev ~]$ sqlplus apps/apps145*
SQLPlus: Release 11.2.0.3.0 Production on Sat Apr 13 23:44:32 2013*
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
From Application User :
*[appldev@dev ~]$ sqlplus apps/apps145*
SQLPlus: Release 10.1.0.5.0 - Production on Sat Apr 13 23:44:43 2013*
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Is the database listener up and running?
Can you connect to the database remotely (from your client machine)?
What is the output of "echo $ORACLE_SID" and "echo $TWO_TASK" return as applmgr user after sourcing the application env file (APPS<CONTEXT_NAME>.env under $APPL_TOP directory)?
Thanks,
Hussein -
Can someone please help??? I received am IPad air in November for my birthday and have not been able to use yet, I could not get it to connect so I returned it for another iPad air. And cannot get it to connect to wireless either. I have three other iPad 2's and laptops in home and everything connects with no problem. What is the deal with these iPad airs? My husband took the iPad to Apple store, it works there but didn't change anything so it won't work at home. Do I need to step down to old IPad since that's all that will connect in home. This is crazy,!!! How can I get my IPad air working in my home.???
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Cannot Connect to the iTunes Store. Request Resource was not found
I hope you can help me.
I get the following error when trying to connect to the iTunes store.
iTunes could not connect to the iTunes store, the requested resource was not found.
I am running Norton Internet security and have allowed all permissions for iTunes.
Following is the diagnostics log:
Thanks,
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D820
iTunes 7.1.1.5
Current user is an administrator.
Network Adapter Information
Adapter Name: {21F2991F-5976-4BE0-8031-064BC7AC9AF0}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Minipuerto del administrador de paquetes
IP Address: 192.168.2.26
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.200
DHCP Enabled: No
DNS Servers: 192.168.2.25
168.243.165.225
Adapter Name: {CB99A2BD-1A04-482A-BC5C-53E5597BA70B}
Description: Broadcom NetXtreme 57xx Gigabit Controller - Minipuerto del administrador de paquetes
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Mon Feb 12 11:09:06 2007
Lease Expires: Tue Feb 13 11:09:06 2007
DNS Servers: 192.168.2.25
168.243.165.225
Network Connection Information
Active Connection: Conexión LAN
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
A secure network connection could not be established.Has anyone actually tried this suggestion posted by jeffporfiro's. He seems to be posting in any topic related to iTunes Store connection probs.
Is there any credibility to his suggestion? (below)
<<jeffporfirio wrote:
Solution is as follows:
Goto your C:\WINDOWS\system32\drivers
find a file named “hosts”, mine was located in a directory named “etc” under the “drivers” directory, rename the file, to something other than its name (eg. rem-old.host) and done ! >> -
How to pass the USER variable to RPD in 11g?
I am trying to figure out how to pass the USER variable to the RPD in 11g.
In 10g, I had define an intializtion block to store the USER variable and pass it to a statement that has to be executed before the query is executed.
We use the Oracle VPD technology that allows to restrict data access. This is the statement that has to be executed before a query can run.
select vpd_adwh.setclnvpdcontext_fnc('VALUEOF(NQ_SESSION.cuser)', UPPER(:USER))) from dual
That is the 10g version and it works fine.
In 11g, I tried to use
select vpd_adwh.setclnvpdcontext_fnc('VALUEOF(NQ_SESSION.cuser)', UPPER('VALUEOF(NQ_SESSION.USER)')) from dual
but this is not working.
Any help?any ideas?
-
TT0846: Data store connection invalid or not current
In one of our environments we started getting TT0846 error randomly.
Everytime we get this error we have to restart our application to reconnect to datasore.
When we checked the error logs, we found the following:
08:32:00.56 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=drwxr-xr-x size=12288
08:32:00.56 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=-rw------- size=0
08:32:00.56 Err : : 20084: 20089/0x198ede80: Log flusher encountered error 906: TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2031, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate". fslsn = 2031.0, disklsn = 2030.534409216, ckptInfo.existLFN = 2028, newestlfn = 2030.
08:32:01.56 Err : : 20084: 20089/0x198ede80: Log flusher reports success: previously-reported error 906 (TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2031, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate") no longer pending.
08:40:01.67 Err : : 20084: 20089/0x198ede80: XXX: Dbhdr group: dba Logpath:/mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2032
08:40:01.67 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=drwxr-xr-x size=12288
08:40:01.67 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=-rw------- size=0
08:40:01.67 Err : : 20084: 20089/0x198ede80: Log flusher encountered error 906: TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2032, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate". fslsn = 2032.0, disklsn = 2031.536557568, ckptInfo.existLFN = 2030, newestlfn = 2031.
08:40:01.67 Err : REP: 26549: UAT_DSN_DS:misc.c(247): TT16046: Failed to force log
08:40:01.67 Err : REP: 26549: UAT_DSN_DS:misc.c(247): TT722: TT0722: Log flusher reports error 906 (TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2032, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate") -- file "logflusher.c", lineno 6136, procedure "sbLogBufOSErrorPush"
08:40:01.67 Err : REP: 26549: UAT_DSN_DS:receiver.c(1241): TT16160: Failed to flush log records. Replication Agent exiting; but will be restarted by TimesTen daemon
08:40:01.75 Warn: REP: 26549: UAT_DSN_DS:receiver.c(2870): TT16060: Failed to read data from the network. TimesTen replication agent is stopping
08:40:02.68 Err : : 20084: 20089/0x198ede80: Log flusher reports success: previously-reported error 906 (TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2032, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate") no longer pending.
08:40:02.91 Err : : 20084: repagent says it has failed to start: Failed to flush log records. Replication Agent exiting; but will be restarted by TimesTen daemon
08:48:02.62 Err : : 20084: 20089/0x198ede80: XXX: Dbhdr group: dba Logpath:/mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2033
08:48:02.62 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=drwxr-xr-x size=12288
08:48:02.62 Err : : 20084: 20089/0x198ede80: XXX: fstat returned with info uid=670 gid=673 mode=-rw------- size=0
08:48:02.62 Err : : 20084: 20089/0x198ede80: Log flusher encountered error 906: TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2033, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate". fslsn = 2033.0, disklsn = 2032.534587392, ckptInfo.existLFN = 2031, newestlfn = 2032.
08:48:02.62 Err : : 20084: 20428/0x2aac1c17e850: sbXactCommit: Unable to sync log to disk. Errors/warnings follow.
08:48:02.62 Err : : 20084: 20428/0x2aac1c17e850: TT0722: Log flusher reports error 906 (TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2033, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate") -- file "logflusher.c", lineno 6136, procedure "sbLogBufOSErrorPush"
08:48:02.62 Err : : 20084: 20428/0x2aac1c17e850: *** 20428: (Error 722): TT0722: Log flusher reports error 906 (TT0906: Cannot change mode on log file /mtsuatlog/timesten/UAT_DSN_logdir/UAT_DSN_ds.log2033, error Operation not permitted -- file "logfile.c", lineno 813, procedure "sbLogFileCreate") -- file "logflusher.c", lineno 6136, procedure "sbLogBufOSErrorPush"
08:48:02.62 Err : : 20084: 20428/0x2aac1c17e850: *** 20428: -- file "logflusher.c", lineno 6136, procedure "sbLogBufOSErrorPush"
08:48:02.63 Err : : 20084: 20428/0x2aac1c17e850: Data store marked invalid [xact.c:/st_timesten_11.2.1/3:sbXactCommit:6597] PID 20428 (timestenorad) CONN 13 (Refresher(S,60000)) Context 0x2aac1c17e850
08:48:03.57 Warn: : 20084: 2649/0x40b2590: Forced Disconnect /timesten/UAT_DSN_datastore/UAT_DSN_ds
08:48:03.57 Warn: : 20089: Stopping subdaemon HistGC thread for /timesten/UAT_DSN_datastore/UAT_DSN_ds because db is invalid.
08:48:03.57 Warn: : 20089: subd not sending crs notification, no valid socket
08:48:03.57 Warn: : 20089: Stopping subdaemon Log Marker thread for /timesten/UAT_DSN_datastore/UAT_DSN_ds because db is invalid.
08:48:03.57 Warn: : 20089: subd not sending crs notification, no valid socket
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:transmitter.c(9660): TT16127: Failed to read transaction logs
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:transmitter.c(9660): TT994: TT0994: Data store connection terminated. Please reconnect. -- file "dbAPI.c", lineno 9656, procedure "sb_dbLogReadQ"
08:48:03.57 Warn: : 20084: 2649/0x3f58850: Forced Disconnect /timesten/UAT_DSN_datastore/UAT_DSN_ds
08:48:03.57 Warn: : 20084: 2649 ----------: Disconnecting from an old instance
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:meta.c(604): TT16012: Data store is invalid. Replication Agent exiting but may be restarted by TimesTen daemon (depending on restart policy)
08:48:03.57 Warn: REP: 2649: UAT_DSN_DS:receiver.c(2870): TT16060: Failed to read data from the network. TimesTen replication agent is stopping
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(1237): TT16012: Data store is invalid. Replication Agent exiting but may be restarted by TimesTen daemon (depending on restart policy)
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:misc.c(247): TT16046: Failed to force log
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(3364): TT16005: Failed to disconnect from datastore '/timesten/UAT_DSN_datastore/UAT_DSN_ds' for 'TRANSMITTER' thread
08:48:03.57 Warn: : 20084: 20089/0x19901490: Forced Disconnect /timesten/UAT_DSN_datastore/UAT_DSN_ds
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:misc.c(247): TT994: TT0994: Data store connection terminated. Please reconnect. -- file "dbAPI.c", lineno 5166, procedure "sb_dbLogFlush"
08:48:03.57 Warn: : 20084: 20089 ----------: Disconnecting from an old instance
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(3364): TT846: TT0846: Data store connection invalid or not current -- file "dbAPI.c", lineno 3178, procedure "sb_dbDisconnect()"
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(1237): TT16012: Data store is invalid. Replication Agent exiting but may be restarted by TimesTen daemon (depending on restart policy)
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(3364): TT16005: Failed to disconnect from datastore '/timesten/UAT_DSN_datastore/UAT_DSN_ds' for 'LOGFORCE' thread
08:48:03.57 Err : REP: 2649: UAT_DSN_DS:repagent.c(3364): TT846: TT0846: Data store connection invalid or not current -- file "dbAPI.c", lineno 3178, procedure "sb_dbDisconnect()"
08:48:03.57 Warn: : 20084: 20089/0x19914aa0: Forced Disconnect /timesten/UAT_DSN_datastore/UAT_DSN_ds
08:48:03.57 Warn: : 20084: 20089 ----------: Disconnecting from an old instance
What I could gather from this is that Replication agent tried to change permissions of transaction logs and was unable to and the datastore was marked invalid and disconnected.
But I have not been able to find a reason for this error occurring, the environment has not been touched, there have been changes made to database objects but can they lead to this error.
If not, what is causing the error and how can we resolve it.
Thanks, your help is much appreciated.You have a permission problem. For some reason your logfiles have the owner/group 'timesten:timesten' but based on the information from ttVersion and from the permissions on the checkpoint file they should be 'timesten:db'a. Also, the permissions shoiuld be rw-rw---- but they are set to rw-------. There could be several reasons for this, the most likely are:
1. Incorrect permissions set on the directory that holds the transaction log files.
2. TimesTen daemon processes running with incorrect userid/group.
3. Instance administrator user (timesten) no longer has group membership of the protection group (dba).
For (1), this would be 'user error'. For (2) and (3), this could only happen if permissions on TimesTen install files have been manually changed (something that should not be done without a very clear understanding of how the permissiosn need to be set) or the uid/gid for the instance administrator user has been changed at the O/S level after installing TimesTen or the 'timesten' user has been removed from the 'dba' group.
I would suggest that you check all these and see what may have been done at the O/S level.
Chris -
Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
ISA B2B logon Error: No valid private connection for internet user
Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
at com.sap.isa.businessobject.User.login(User.java:143)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: BlackmanIts a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too -
ISight - connects with windows users no problem?
I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.
It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens -
Grant debug connect session to user
I understand that if DBA hasn't granted following option to "user" following way:
grant debug connect session to user;, then "user" wil lget following error when she tries to debug:
ORA-0131:Insufficient Priviledges
Debugging requires Debug connect session system priviledgesIs there any explanation why DBA decides to not grant such privilege? Maybe such privilege slows down something? Maybe it can create security "hole"? Maybe there is another good explanation?
The "user" in this example was Schema/Account ment for Development personell who developes functionality, but it doesn't matter i think what kind the "user" is.
so why you think i don't have such privilege, what bad could such privilege when granted give?Its just that You have not been Granted that Privilege. Mostly in what ever shop i have worked Such grants are given on request Base.
Debugging is a Developers Right and no one can denie it.
But i never use any debugging tool. I only relay on my Instrumented Code. -
Windows cannot connect to the User Profile Service service
On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?
On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?
Maybe you are looking for
-
Need to convert ajp video file to quicktime
Need to convert ajp video file to quicktime any ideas?
-
Upgrading to CS6 Design and Web Premium from CS4 Design Premium Install Failure
I am trying to upgrade to CS6 Design and Web Premium from CS4 Design Premium on Win 7 (32bit). I am nistalling from the DVD which was purchased from the Adobe Store. The box says it is for Upgrading from 4 or 3x. I am entering the CS6 serial numb
-
My yahoo mail page is huge font. How do I get it back to normal font?
I started using foxfire, but for some reason when I go to my yahoo mail the font size is so huge. How can I correct this so the e-mail font is normal again. This has only happened to my e-mail and if I open an attachment it has large font too.
-
Re: ActiveX problems with 3.0.F.2 (fwd)
Forte has very specific requirements for ActiveX controls. We found out the hard way that Forte does not support the use of all ActiveX controls. Here is some information I received from Mark Cooper at Forte: With a bit more digging I found that Acti
-
Middle Name appearing twice in CRM
Hi everyone, I created a custom CRM form containing just a "Middle Name" Field. I noticed though in the admin under CRM > Customers that there is a "Middle Name" appearing under "Contact Details" and then a second "Middle Name" that appears further d