Stored procedure from JDBC in VC

Hello
We're starting to use VC 7.0 SP14.
We've already made few applications using JDBC tables or view and BAPI.
Now we want to use stored procedures of the same DB.
Our DB system was created as a "SAP_BI_JDBC". But when I look in VC, I can see my system but it only proposes me to "look for a table" or to "browse table catalog". Here I don't see my stored procedures.
Hence, I tried to create a "JDBC Systems" but now I can connect to it (connection test fail).
Can any one help by giving me the parameters to use on the DB side, or portal's system parameters, ...
Thank you !
Benoit

Hi,
You test the Connection in the prortal if it fails then it is problem woth Usermapping.
Do the usermapping for that DB
then try again
Govindu

Similar Messages

Calling Stored Procedure from JDBC MSSQL

Ok, I have a stored procedure on a MsSQL Server 2000 data base. I need to call it to encrypt/decrypt passwords, my problem is when I run it from Query Analyzer it works fine but not in JDBC land. Below I have included my code. I have read you need to use a callable statement, but my query has a proc call embedded in it, not just a proc call. Anyone know how this would be accomplished?
THanks in Advance
try {
               // create an insert query
               StringBuffer query = new StringBuffer();
               // add strings and variables to query
               query.append("INSERT INTO ");
               query.append("users (Company, FirstName, LastName, Username, ");
               query.append("Password, Email) ");
               query.append("values(");
               query.append("'" + form.getCompany() + "', ");
               query.append("'" + form.getFirstName() + "', ");
               query.append("'" + form.getLastName() + "', ");
               query.append("'" + form.getUsername() + "', ");
               query.append("dbo.fn_sys_encryptpwd('" + form.getPassword() + "', '" + key + "'), " );
               query.append("'" + form.getEmail() + "')");
               // get the datasource from the From the context
               DataSource dataSource = ResourceLocator.getRCDataSource();
               // open a connection
               Connection conn = dataSource.getConnection();
               // make a statement and execute it
               CallableStatement statement = conn.prepareCall(query.toString()) ;
               //Statement statement = conn.createStatement();
               statement.execute();
               // Insert has been performed...destroy the statement and connection.
               statement.close();
               conn.close();
          }

I tried with Statement first then I tried with the PreparedStatement, but neither one worked. I have inlcuded part of the stackTrace to give you an idea of my problem
Thanks
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'dbo.fn_sys_encryptpwd'.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown
Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown
Source)
at com.microsoft.jdbc.sqlserver.tds.TDSExecuteRequest.processReplyToken(
Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Sour
ce)
at com.microsoft.jdbc.sqlserver.SQLServerImplStatement.getNextResultType
(Unknown Source)
at com.microsoft.jdbc.base.BaseStatement.commonTransitionToState(Unknown
Source)
at com.microsoft.jdbc.base.BaseStatement.postImplExecute(Unknown Source)
at com.microsoft.jdbc.base.BasePreparedStatement.postImplExecute(Unknown
Source)
at com.microsoft.jdbc.base.BaseStatement.commonExecute(Unknown Source)
at com.microsoft.jdbc.base.BaseStatement.executeInternal(Unknown Source)
at com.microsoft.jdbc.base.BasePreparedStatement.execute(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.DelegatingPreparedStatement.execute(Deleg
atingPreparedStatement.java:168)
at com.retailcode.web.data.dao.LoginDAO.createLogin(LoginDAO.java:81)
at com.retailcode.web.submit.SubmissionServlet.postRegister(SubmissionSe
rvlet.java:226)
at com.retailcode.web.submit.SubmissionServlet.doPost(SubmissionServlet.
java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.p
rocessConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo
int.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol
lowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)

Urgent! Call stored procedure from jdbc vs. call from sqlplus?

Hello I met a strange problem when using JDBC (to Oracle). I have a stored procedure mypack.myproc, which updates a table (only one row and one column in the table). I found that when I called the procedure directly from sql*plus, like:
==========
BEGIN
mypack.myproc;
END;
==========
the value is 2, which is correct.
However, if I call the procedure from with in java via jdbc, the value become 591 (which is ridiculous), the jdbc call looks like:
================
cstmt = con.prepareCall("{call mypack.myproc}");
cstmt.executeUpdate();
con.commit();
================
This is really wield, Any idea?
Thanks

Hey buddy, it's you again. Just let you know that you are right. The problem is caused by mis-match between jdbc date and oracle date (that procedure is used to do some date calculation). My co-worker suggested me to add this statement in the procedure, and it did solved problem:
================
DBMS_SESSION.SET_NLS( 'NLS_DATE_FORMAT', '''DD-MON-RRRR''' );
================

Invalid Object when Calling Stored Procedure from JDBC Adapter

JDBC Outbound adapter in XI 2.0 connected to SQL Server. I've coded my mapping to format the XSL mapping properly but the Adapter appears to not be able to find the Stored Procedure. Error message returned is "Invalid Object spStoredProcedureName".
Does anybody have any clue as to what I'm missing???

I know this is trivial, but did you use the "full" name of the SP as <schema>.<procname>???
HTH

Invoke stored procedure from JDBC Adapter

Is there a tool that generates interfaces for stored procedure(ORACLE PL/SQL) like RFC or IDOC adapters?

Hi Denis,
I dont think there is any such tool.]
To generate a Stored Procedure of your Oracle DB, all you will have to do in your JDBC adapter configuration is give the name of the Stored Procedure under <Table> and you will have to give "execute" as the value under action attribute.
Just check this link. Hope it helps,
http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/content.htm
Just check this blog of Sriram wherein a stored procedure of a MaxDB Database is called.
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
I have implemented a scenario which requires an Oracle stored procedure to be executed and so, if you do need any further info, let me know.
Hope this info helps,
Regards,
Bhavesh

How to pass RECORD input type to stored procedure from JDBC?

Hi,
We have stored procedure which takes RECORD as input .
We could execute the below script from oracle client tool and get the response.
declare
l_record app.batch_update.add_record;
l_id number;
begin
-- memberNumber
l_record.no := '123456700';
-- Policy Number
l_record.pno := '1234567'
-- Status. This will always be NEW.
-- Call to API to add record
app.batch_update.add_request
(p_record => l_record,
p_id => l_id,
end;
We have requirement to construct RECORD input from Java application and pass it to callable statement.
We have tried to construct it via STRUCT and pass it to callable statement but it didn't work.
We have constructed it like the following but not sure whether it is correct. It was throwing error "java.sql.SQLException: invalid name pattern: app.batch_update.add_record
StructDescriptor structdesc = StructDescriptor.createDescriptor
("app.batch_update.add_record", delConn);
Object[] p1obj = {' 12345','124050'};
STRUCT p1struct = new STRUCT(structdesc, delConn, p1obj);
Not sure whether I am doing the logic correctly.
Please point me to the correct approach.
Thanks in Advice
Thanks

Wrap the method using a record-type parameter in PL/SQL; a simplified example follows. Add exception handling, translation of types etc. as needed.
CREATE OR REPLACE PROCEDURE prc_wrap_prc_using_rec
pv_my_field_01 IN VARCHAR2,
pv_my_field_02 IN VARCHAR2,
pv_my_field_99 IN VARCHAR2,
pv_err_msg OUT VARCHAR2
) AS
-- Non-scalar parameter
pr_my_record user.pkg_rec_declarations.wr_a_record_decl;
BEGIN
-- Load the work record
pr_my_record.pv_field_01 := pv_my_field_1;
pr_my_record.pv_field_02 := pv_my_field_2;
pr_my_record.pv_field_99 := pv_my_field_99;
-- Call the procedure
pkg_std_routines.prc_do_sumfin(pr_my_record, pv_err_msg);
END;

Calling Stored Procedure from JDBC Adapter

Hello,
I am Updating a SQL Server Table using JDBC Adapter.
Now I have multiple input rows and the procedure needs to be called for each set.
Do I need to use multimapping for this or just generating multiple Statement node will solve?
Also For this will there is any knows/ forseen problem (like Transaction handling) that I need to take care of?
Thanks and Regards,
Himadri
Message was edited by:
Himadri Chakraborty

Himadri,
You can just create multiple statement nodes in one message.
I am not aware of any known or foreseen issues with this approach.
Kind regads,
Koen

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

Invoking Oracle stored procedures from within a JDBC channel for PI 7.1

Hi ,
Can anybody tell me that is it possible to invoke Oracle stored Procedure from within a JDBC sender channel for PI 7.1.
Its working in XI3.0 and XI 7.0 for Oracle DBMS versions >= 10.2.x. But I am not sure,whether it will work for PI 7.1 also.
Thanks & Regards,
Saru

HI,
refer below link,there is no much difference in PI7.1 ,executing stored procedure is same .
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b72b2fde93673e10000000a114a6b/content.htm
Regards,
Raj

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
 proposal_number,
 to_char(sequence_number),
 column_name,
 column_value,
 update_timestamp,
 update_user
 from
 coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Parameters to stored procedure from sender JDBC

Hi,
I am using the JDBC sender adapter to call the Oracle stored procedure. Oracle version is 10.2. hence I m using function call using select.
My concern is, how to pass the input parameter to Oracle function from JDBC sender.
Regards,
Kavita

Hi Kavita,
I am using the JDBC sender adapter to call the Oracle stored procedure
Unfortunately, the sender JDBC adapter does not support Oracle's stored procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
Executing an Oracle Stored Procedure from Sender JDBC adapter
[Not sure about latest versions of Oracle]
can I pass the input parameter to this function? 
In my opinion, No
If not, I need to change the approach, and need to use receiver JDBC[as need to pass input parameter]. 
This could be possible but havent tried it
Can JDBC Receiver adapter support stored procedure for Oracle[10.2]
Yes
Regards,
Prateek

DB2 Stored Procedure from Java-JDBC

Hi All,
I am using DB2 stored procedure which have been written in COBOL. I have two types of stored procedures. First types of stored procedure takes IN parameter and returns OUT parameter. These stored procedures are working fine. The second type of stored procedure takes IN parameter and returns a CURSOR. According to Database team (who wrote these stored procedure) claims that they can see data in a cursor when they test these stored procedure directly in the database. However, when I run these stored procedures from Java code it returns NULL ResultSet. Here is the code:
public SearchResult getAllBenefitHEDType(SearchParameter searchParam) throws DAOException {
log.debug(" getAllBenefitHEDType method - entering ");
HashMap searchParametersMap = searchParam.getHashMap();
SearchResult searchResult = new SearchResult();
String type = (String) searchParametersMap.get(UDFConstant.LOOKUP_SEARCH_TYPE);
HashMap resultParametersMap = new HashMap();
ArrayList resultSetDTO = new ArrayList();
try {
conn = this.getConnection();
conn.setAutoCommit(false);
System.out.println("getAllBenefitHEDType Step 1");
CallableStatement cs = conn.prepareCall("{call TEST.APS003(?)}"); // Stored Procedure with one IN parameter.
cs.setString(1,type);
boolean retVal = cs.execute(); // this should return true if ResultSet is available.. in my case it is returning false.
// I tried with getting the Object
ResultSet rs = (ResultSet) cs.getObject(1); // this should give me a valid result set ... in my case I am getting null
if (rs!=null) {
System.out.println("getAllBenefitHEDType Step 4A Result Set Not Null");
} else {
System.out.println("getAllBenefitHEDType Step 4A Result Set Is Null");
// I tried getting the resultset
ResultSet rs1 = cs.getResultSet(); // this should give me a valid result set ... in my case I am getting null
if (rs1!=null) {
System.out.println("getAllBenefitHEDType Step 4D Result Set Not Null");
} else {
System.out.println("getAllBenefitHEDType Step 4D Result Set Is Null");
while (rs.next()) {
System.out.println("getAllBenefitHEDType Step 5");
LookupDTO lookupDTO = new LookupDTO();
// the following code populate the Lookup DTOs from ResultSet.

A few comments...
1) Creating tables, particularly tables whose names seem to imply that they are temporary tables, on the fly in a stored procedure is a bad idea. That is not the way to work with Oracle, though it is a common practice in other databases like SQL Server. There is undoubtedly a better way to do this in Oracle if you can explain what you're trying to accomplish from a business standpoint.
2) If you are going to use dynamic SQL, you almost always want to use bind variables, not literals. One of the quickest ways to kill an Oracle database's performance is to not use bind variables.
3) As has already been mentioned, assuming FH_INICIO is a DATE column, you need to put an explicit TO_DATE around your strings in order to convert them to dates. Otherwise, Oracle's implicit cast depends on the session's NLS_DATE_FORMAT, which is likely to be different in different client applications and from different client machines.
Justin

Multiple stored procedures using JDBC Adopter, Synchronous call

Hello Guys,
This is kind of different scenario,
Here is the scenario (SQL Server -> XI -> Legacy)
1.I want to trigger stored procedure (from XI to)
2.Inside the stored procedure we are going to have multiple stored procedures.
-Inside stored procedures
SP1 -> It supposed to select the data from interface control table, if that is success
SP2 -> Call some other stored procedures which can be select/insert/delete from different tables most of the cases it would be select, if that is success
It should give results back (Response) to XI and with some output parameters like (status message, etc)
Next step I want send those results to target system which is legacy. If that is success
Next step I should update entry in the Interface control table(which is in SQL Server) with success entry like (success message, current date, current time, interface name, username.)
If it fails any stage like while selecting data from interface control table which is SP1/ SP2 It should give error message back to XI(output parameters). XI is going to send Alerts/Mails to respective interface owners.
This is my scenario can anybody help me on this what needs to be done to implement this scenario.

Hi Murali,
Anyway , altimately you are going to call one stored procedure and going to get one output. So it will not be a problem I think.
Anyway it is required to introduce BPM here.
Next step I want send those results to target system which is legacy. If that is success
>>>You can make sure that message is recieved by legacy system. Because legacy systems like File systems will not support Application Acknowledgement. So here you can go with Transport Acknowledgement.
From where will get Success messages like (current date etc) are you planning to take XI system date.. If so you can get this. And you can send the message to SQL.
If it fails any stage like while selecting data from interface control table which is SP1/ SP2 It should give error message back to XI(output parameters). XI is going to send Alerts/Mails to respective interface owners.
>>>For application errors like SP2 error etc, you need to get the Error Response from stored procedure itsel.
Second option is you can go with Adapter Alerting, whenever any error in the Sender JDBC adapter.
Anyway design/requirement should be perfect, before start the process here...
Regards,
Moorthy

How to send a Varying Array param to a PL/SQL Stored Procedure from Java

* I am VERY new to jdbc, and even somewhat new to Java
* I'm using Java 1.5, Oracle 10g.
* I need to call the following PL/SQL Stored Procedure from Java:
procedure setEventStatus
i_deQueueStatus in deQueueStatus_type
*deQueueStatus_type is the following (an array of deQueueStatus_OBJ):
CREATE OR REPLACE TYPE deQueueStatus_OBJ as object
eventID number (20),
dequeuestatus varchar2(20)
CREATE OR REPLACE TYPE deQueueStatus_TYPE IS VARYING ARRAY(500) of deQueueStatus_obj
*I have created a Java object as follows:
public class EventQueueDeQueueStatus
     long      eventID;
     String      dequeueStatus;
     EventQueueDeQueueStatus(long eventID, String dequeueStatus)
          this.eventID = eventID;
          this.dequeueStatus = dequeueStatus;
I have an ArrayList of these.
I need to pass this list to the Stored Procedure. How do I create a java.sql.Array so I can call CallableStatement.setArray to set the parameter? Or do I use something else? I have tried setObject with both the ArrayList and also with a primitive array, but got "Invalid Column Type" both times.
Any help would be greatly appreciated. I just got this task today, and I have to make it work by Tuesday :-( !
Thanks,
Kathy

Kathy,
Search the archives of this forum and the JDBC forum for the terms STRUCT and ARRAY and you can find some sample code on the JDBC How-To Documents page and the JDBC Samples which can both be accessed from this page:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Stored procedure from JDBC in VC

Similar Messages

Maybe you are looking for