Storing username and passwords in web pages on safari

Hi folks
I am using an iPad 1 and wish to change my previous decisions regarding saving usernames and passwords for web pages within the safari browser.
I guess I have hit the "do not save" or similar option at some stage and I now wish to recall the username and password in future.
Any help would be really appreciated

Make sure that Settings > Safari > AutoFill > Names And Passwords is set 'on'. To be able to store them for sites that you've previously said 'no' to you may also need to clear Safari's history and cache : Settings > Safari > Clear Cache (and Clear History). And possibly clear cookies : Settings > Safari > Clear Cookies

Similar Messages

How do I clear stored usernames and passwords for my podcasts?

We currently operate a password-protected RSS feed for the subscription portion of our website. For the most part it works flawlessly; people can subscribe to the feed and receive daily updates to their iTunes. If their account is canceled or goes on hold for non-payment then our database deactivates their username, which halts access to the feed.
That all works well. The problem is that if they re-subscribe to the subscription portion of our website they receive a new username and password. Then, when they go to re-subscribe to our password-protected podcast they are not prompted in iTunes for their new username or password. iTunes simply uses the old username/password combo from their canceled account, which makes the podcast fail to update.
So essentially, I'm asking how we can manually clear iTunes' stored usernames and passwords for podcasts. Thanks!

Figured it out. Just gotta delete keychain.plist, which is found in one of the following two spots:
C:\Users\YOURUSERNAME\AppData\Roaming\Apple Computer\Preferences\keychain.plist
C:\Documents and Settings\YOURUSERNAME\AppData\Apple Computer\Preferences\keychain.plist

VC Change username and password for web services

Hi everybody
I need to change the username and password into the portal of some web services that have already been created portal is consuming these web services a XI
Thansk
Ivan

it is ok ....
thank you....
i have now this issue:
i need to add new E1 to be in the same trunk for previous E1 which is for Abdali. new E1 will not have signal it depeneds at old one timeslot.
i used this for new E1:
prov-add:nailedtrnk:name="1033",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="33",dsttimeslot="33",spansize=31
for old one this:
prov-add:nailedtrnk:name="1002",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="2",dsttimeslot="2",spansize=30
============================
at AS5400 i used to add new E1:
controller E1 7/2
framing NO-CRC4
pri-group timeslots 1-31 nfas_d primary nfas_int 1 nfas_group 0
Is this true or there are other commands i should use?
OLD E1 is configured as:
controller E1 7/0
framing NO-CRC4
channel-group 0 timeslots 1
pri-group timeslots 2-31 nfas_d primary nfas_int 0 nfas_group 0
description Connection to Abdali
interface Serial7/0:0
no ip address
encapsulation ss7
channel-id 0
interface Serial7/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-ni2c
isdn incoming-voice modem
isdn map address . plan isdn type network
isdn rlm-group 0
no isdn send-status-enquiry
isdn negotiate-bchan resend-setup
isdn bchan-number-order ascending
no cdp enable
any help please for correct commands i shall use? please see attached file for details.

Hiding Username and Password in Web Report URL

Hi there,
I am calling a report from my webforms using the WEB.SHOW_DOCUMENT built-in. The problem is that when using this, when the report or the parameter form is being displayed on the browser, the username and password is also displayed on the browser's URL bar with other report parameters.
Is there any way to surpress or hide the username and password? Please help as this raises some security issues.

First off make sure your form
logs on using an ON-LOGON trigger
using the logon built in. Inside
a form level ON-LOGON trigger put the
following code (i.e.)
logon('username','password@database');
The password and database are concatenated together.
Then you can call reports without
puting the username and password in the
URL. Here are two examples.
web.show_document (i.e.)
web.show_document('URL_HERE','_blank');
or via a run_product (i.e)
Run_Product(REPORTS,'admin_req_snapshot',SYNCHRONOUS, RUNTIME, FILESYSTEM,plist,NULL);
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hkpang ([email protected]):
Hi there,
I am calling a report from my webforms using the WEB.SHOW_DOCUMENT built-in. The problem is that when using this, when the report or the parameter form is being displayed on the browser, the username and password is also displayed on the browser's URL bar with other report parameters.
Is there any way to surpress or hide the username and password? Please help as this raises some security issues. <HR></BLOCKQUOTE>
null

802.1x without storing username and password

I have a couple all-Mac schools that would like to begin integrating iPod touch and iPad in classroom activities.
Our wireless network is managed at the district level and it offers to ways to log into the Internet – one is a popup window with a Java applet, and the other is 802.1x.
Obviously the Java applet does not work on iPhone OS and I'm sure it never will. 802.1x works well with one caveat: It stores the username and password so whichever student uses it next will remain logged in as the previous student.
Is there any way that the iPods can be forced to prompt for the 802.1x username and password each time they rejoin the network? Any other ideas?
And before anyone asks, we have submitted requests to make the wireless network friendlier to non-traditional computing (ie. devices that are not standard PCs and Macs), but it doesn't look as if that's happening any time soon.
Thanks!

I don't store them, if it is a user and password. If the user entered them I keep them in instance variables. If you only have one user for the database (which is not the best IMHO) you should decrypt it in the code. The crypted can be stored whereever, but still not good.

How can I save or export the file containing stored usernames and passwords?

I'm about to update my desktop computer's operating system, which will mean my hard drive will be wiped. I want to save any file Firefox might have that contains usernames and passwords so I don't have to rebuild that file once Firefox is reinstalled. I've found such files for extensions and bookmarks but not for passwords.

In article: http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords
*'''Backing up and restoring passwords '''
**Firefox '''''3.5 and later versions''''', including current beta and nightly builds, use '''''signons.sqlite'''''.
*'''Troubleshooting'''
**Firefox '''''3.5 and later versions''''' use the file '''''signons.sqlite''''' to store the encrypted names and passwords. passwords.
**You can rename '''''signons.sqlite''''' to signons.sqlite.sav to make Firefox '''''3.5+''''' versions use the file signons#.txt from a previous Firefox 3 or 2 version.
***'''''3.5+''''' = same as '''''3.5 and later versions'''''
Also:
*http://kb.mozillazine.org/Profile_folder_-_Firefox#Files_and_folders_in_the_profile
*https://support.mozilla.com/en-US/kb/Backing+up+your+information
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
*

4402 guest users authetication via Web (username and password)

Hello Everyone,
We have an issue with Wireless controller model 4402 loaded with 4.0.179.11. This box has stopped authenticating (Layer3 security Web Policy based local usernames and password) last night.
Steps taken to resolve the issue:-
1) Created local usernames and password via Web and tried using wireless through Guest ssid, when user enters this information web page loops back to authentication.
2) Tried authenticating via another Laptop, had no luck.
3) Changed WLAN SSID Guest from Layer3 security Web Policy to Layer2 Security, created Mac filter table for guest on the Controller. Guest was able to connect to the internet.
We have not made any configuration change. As this issue affected all Users, we restarting the controller after which issue was resolved. As per my colleagues this has happened couple of times and every time restart fixes this issue.
Please shed some light on this.
Regards,
Mujahid

Hi Mujahid,
Just to add a note to the great advice from Richard (5 points for your good work on many posts Richard!)
Have a look at these bugs that I'm pretty sure we were hitting with this WLC Version as well;
CSCsi91600 Bug Details
Internet Explorer redirects to login page with webauth due to cache
Symptom:
Client using IE, and web authentication has passed authentication, Policy Manager is in a RUN state, and when the user clicks on the "home" button, or types in the address of their normal homepage, they are continually redirected to the web-auth page
Conditions:
Client using IE, and web authentication has passed authentication, Policy Manager is in a RUN state, and when the user clicks on the "home" button, or types in the address of their normal homepage, they are continually redirected to the web-auth page
Workaround:
Enable IE client to check for newer versions of stored pages on "every visit to the page" option instead of "automatically" (default).
Tools -> Internet Options... -> Temporary Internet files -> Settings... -> Check for newer versions of stored pages: Every visit to the page.
1st Found-In
4.0(179.11)
Fixed-In
4.1(176.6)
4.1(177.0)
4.1(181.0)
4.2(31.0)
4.2(61.0)
Related Bugs
WLC Web-auth homepage leads back to reauth page if redirect URL is used
In a web-auth deployment with or without guest anchoring. If the redirect url is populated, the users homepage will no longer be able to be reached. Whenever the user navigates back to his homepage it will show the reauth page and the user will no longer be able to reach their homepage. Homepage leads back to reauth page if redirect URL populated
CSCse90894 Bug Details
Internet Explorer redirects to login page with webauth due to cache
Even after the commit of CSCse03666 - which added the following line to the
default webauth HTML -
IE 6 continues to redirect its home page back to the webauth login page.
This is due to a known bug in IE.
1st Found-In
4.0(155.5)
Fixed-In
3.2(193.4)
3.2(193.5)
4.0(206.0)
4.1(171.0)
Hope this helps!
Rob

ICloud Keychain: username and password form on separate pages

Hello,
I really like using iCloud Keychain. I am, however, unable to store a username and password for two web sites. Both sites use a separate page for username and password. It appears that Safari does not see the web form on each page. I have attempted to manually add the usernames and passwords to Keychain Access on my iMac, however, it had no effect. Note that I have also enabled the Safari options "Autofill usernames and passwords" and "Allow Autofill even for websites that request passwords not be saved."
Has anyone experienced Safari not showing a prompt to save usernames/passwords and found a solution?
Thanks,
Bryan

II'd rather not disclose the financial institutions i do business with, but my bank and two mutual fund websites use separate pages for username and password. I chec around, and if you go to the Bank of America website, they do it as well. Keychain does not work on any of the three sites I use.
Thanks for your help.

How do i open a protected pdf that requires username and password in side the pdf itself?

Hi,
I bought this pdf from SABS South Africa, the file contains the electrical unit standards and I cant walk around with my laptop all the time. The PDF has a username and password field on page 6, which connects directly to SABS website to be able to unlock from page 6 to 397. Why cant i type into the username and password fields on my mobile??
Regards,
Christo

Hi,
Is the PDF document "protectedPDF" by Vitrium?
Currently, Acrobat DC mobile products (for iOS and Android) do not support PDF documents with DRM (Digital Rights Management) by third-parties.
I am not aware of any other free mobile apps that support "protectedPDF" documents.
I'd recommend using the desktop version of Reader on a Windows or Mac computer to view the PDF documents. Sorry for the inconvenience.

Repeatedly being asked for username and password

Good morning,
I have a Windows Home Server which I store my pics and music on, and then sync it with my Mac.
I have connected to the WHS and entered my username and password and ticked the checkbox telling it to store these in keychain.
I then drag the volumes into my user ID logon items under account preferences to auto mount when I next boot.
However every time I boot I have to re-enter the username and password, even if I check the box for store in my keychain it still requires me to re-enter.
Is there a way I can get it to use the stored username and password and not keep re-prompting?
regards,
Greg

Try verifying your keychain for errors.
Open the /Applications/Utilities/Keychain Access.app
Then from the Application Menu choose keychain firstaid. Putin your username and password click on the Verify button.

What is the default username and password for administering my f4500 deskjet printer?

I need to administer my F4500 Deskjet through my web browser, but do not know the username and password. I presume there is a way to default the settings, but I need to know the defaults. Please provide the default username and password for web access.
Thanks.

The default username is Admin, but the password is blank by default. Somehow, a password was added at some point.
You can try going to the EWS and going to Settings and looking for a password reset option in the Administrator Settings section. If it is there, it will be the only way I know of clearing the password on this particular printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Passing Username and Password When Invoking Another Service

Suppose that I have Service A that calls Service B in its code.
I can set authentication , inbound/outbound integrity and confidentiality settings for this service.(Service A)
Can I define a mechanism-declaratively-that tell the service A to include this information (username and password) in its SOAP request message when calling another service? (service B, suppose that service B's authentication is enabled) for example in WS-Security part of the request to service B.
Best Regards,
Farbod

It appears the only way to parameterize the Applications username and password in Web forms is to use either
a cartridge implementation or javascript. I found the following document on Metalink describing the
javascript solution:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=106048.1

Passing username and password in JInitiator

Is there any way to pass my username and password in embed or object tag so that I don't have to type it when I am connected to the oracle application.

It appears the only way to parameterize the Applications username and password in Web forms is to use either
a cartridge implementation or javascript. I found the following document on Metalink describing the
javascript solution:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=106048.1

How do i send the username and password to yahoo web page through url

how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

Passing username and password to Forms Application from a web page

Hi,
I have a web application where the user needs to login and browse some web pages.One of the links on this page
calls a forms application. How do I pass the userid and password from the web application to the forms application
so that the user doesnot need to login once again.
Thanks,
Vikram

I have one problem with that. The password of the user
should not show up in the URL or the user should not be
allowed to view the password by clicking on
"View Source" on the browser.
How can I call the forms application in such a way so that the user password doesnot show up?
Thanks for your reply.
-Vik

Storing username and passwords in web pages on safari

Similar Messages

Maybe you are looking for