Strange behavior by OMBIMPORT and configuration defaults

Hi!
We use a OMBplus script that exports a collection from our dev repository as:
OMBEXPORT TO MDL_FILE '$MDL_EXPORT_FILE' FROM PROJECT 'STORE' COMPONENTS (COLLECTION '$COLLECTION') OUTPUT LOG '$MDL_EXPORT_LOG'
When importing it into the test repository the ORACLE_MODULE will loose its configuration defaults and the configurations will be set to "Unknown value", and the deploy will fail. (The configurations are the same and the import uses NAMES as identifier)
Why is this happening? Why does the import update the ORACLE_MODULE? Also, it works fine with some modules so it is probably a setup issue, but I just can't find it!
Do you have any ideas of what problems I'm facing?
Thanks in advance!
// Pär

Hi again.
I solved the problem now, but I do not know the exact reason it failed in the first place...
The problem did occurr in the source-repository (at EXPORT). So I dropped and recreated all locations connected to the problematic module. Then I validated the entire module and made sure it was OK. Then I exported the entire module.
Finally I went into my target repository and deleted the module and then re-created it using the export from above. It seems to have solved the problem.
Thanks!
/ Pär

Similar Messages

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior in updating and standbying

Hi,
In the last 4 weeks I've been facing some strange behavior from my iPhone 4. First, sometimes when I pick it up its screen is already on (dimmed) and showing the lock screen (with some elements missing though). Secondly, and more annoying yet, when I try to update the apps via app store the initial process occurs normally but after loading the first app it begins installing it and keeps in it forever. I have to soft reset the phone. After that, the app (that kept installing) seems ok. So, I repeat the process of update from the beginning (app after app).
I've already tried to hard reset the device without any luck with any of the problems. Any suggestions about what is going on?
Thanks
Adriano

Hi,
I'm not clear on the distinction you're making for type of access.
Well, to be honest, now that I've re-read that this morning I'm not completely sure what I had in mind either. I think I was thinking about using the collection in what I believe the documentation calls "slices". However, given the other information you've posted it doesn't seem like that would be a feasible alternative in any case.
I understand what you mean about varray and nested-table with the upper-bound limit for the varray's... I've not actually compared the two for performance so my idea that there may be a difference could be completely incorrect. Beyond that, creating code that only works in batches (or slices) may be less performant than what you currently have.
I hope I've not detracted from the thread and maybe someone else with more experience will have an "ah ha!" sort of observation.
Regards,
Mark

Strange behaviors between TextInputSkin and StageTextInputSkin

Hi All,
I met a very strange behaviors, and need help with, any idea will be truly appreicated.
I have a phone field and date field both from TextInput field, I aslo have textfieldskin which is original from TextInputSkin.
When I apply the TextInputSkin to the TextInput field, the softKeyboard Type can not be modified. I found out that as TextDisplay is not StyleableStageText, the autocorrect, type, etc can not be modified while StageTextInputSkin will work just fine.
However, when I applied the StageTextInputSkin to my fields, the mouse click event can not be rececived any more...
My question: How can I change the softkeyboardType and be able to receive mouse click event at same time if my control is from TextInput?
Kind Regards,

6 months, and a new cs6 with no improvements on this issue.
My biggest problem is with an android ICS unit the softkeyboarddeactivated gets called when the keyboard switches and shows the mic speak input keyboard but softkeyboardactivating or activated does not get called when the mic input keyboard is shown.
Also the scrolling bug is horrible and needs to be fixed.
and keypresses are needed.
and being able to layer the native components would be great.
im sad.

Strange behavior from battery and/or charger on my Playbook

I have a Playbook 16gb, about a year old which was working well until about 2 months ago when the micro usb port stopped working. Turns out a pin was damaged, and I had to have a whole new port installed (cost $75.00) with a 30-day warranty.
Two months later, when the warranty had run out the same problem started happening. I went to another repair shop this time and was told again, a pin was damaged. I don't know if the first place gave me a damaged port or never removed the old one. I thought this was really strange, but could not dispute it and again had a new usb port installed ($45.00 this time, and a 90-day warranty).
So this time the usb port is working, and the charge comes across the battery icon to show that the battery is charging, except that it never charges up the battery. Overnight charging later, the battery indicates the charge is still where it was when I originally started charging - but - I seem to be able to work on the tablet for many hours with the charger attached. So, the charger does not charge the battery but it seems to work like an electrical cord and keep electricity going into the tablet for as long as I need to use it. Trouble is I can't take the tablet anywhere if I can't guarantee I will find a wall plug to plug into.
So I thought maybe the battery is the problem. I installed Battery Guru, but it says the battery health is 90%. When I remove the charger the battery level starts to drop, but when I plug it back in, it does not increase, but doesn't decrease either.
Can anyone tell me what is going on? I don't want to go back to the shop and have to spend more money without a guarantee anything will be fixed.

I think thats fine. This is a gray area since 2 companies have worked on it. I don't think you should have to keep paying over and over to get the same thing fixed if it is breaking for no reason. Is it possible for the last company that repaired it to contact RIM for a possible RMA or other repair options?
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Strange behavior with getCommonCharacterFormat and links

I am working on a texteditor using TLF and Flash CS5. The problem I have is that when I use getCommonCharacterFormat on a single point selection the behavior is different if I have a link-tag adjacent to the selection compared to not having it.
Think of a text like this: "Hello beautiful world!"
- When I place the cursor at the end of the text in bold the format says bold and when i continue to write the text will be in bold.
- When I place the cursor just before the text in bold the format says not bold and when i continue to write the text will not be in bold.
This makes perfectly sence to me and is exactly what I would expect to happen.
But if I make the word "beautiful" into a link the behavior is very different.
- When I place the cursor at the end of the text in bold the format says not bold but when i continue to write the text will be in bold.
- When I place the cursor just before the text in bold the format says bold but when i continue to write the text will not be in bold.
Is this a bug or is there a good explanation to this behaviour? Should I do want I want to do in a different way?
I you want me to I can paste some example code that illustrates my problem.
/Peter

Sounds like a bug. The issue, for what it's worth, is that typing after a link is different than typing after a span, because new text that you type isn't added to the link. We'll investigate.
- robin

Strange behavior with 3560s and RPS 2300

I just installed an RPS 2300 in a small branch office that has a pair of WS-C3560-24PS switches. There are two odd things I'm noticing:
1) When I do "show env rps", it shows the RPS detected but I don't get any information about it.
Switch#show env rps
SW Status RPS Name RPS Serial# RPS Port#
1 Active <>
2) When the switch loses power it fails over to the RPS just fine, but does not fail back to regular power automatically. I have to unplug the RPS.
I've installed same model RPS with a pair of 3750-Es switches, and in that case, "show env rps" from the switch shows me the RPS information, and failback happens when regular power is restored.
Is there something different about the 3560s, or did I miss something in the configuration? The switches are running 12.2(55)SE7, IP Services.

Yes, just found via searching automatic failback is only supported on the 3560-E and 3750-E.
https://supportforums.cisco.com/message/3669961#3669961
Also noticed the "power rps" commands are only supported on the 3560v2, so those won't work for me.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_52_se/command/reference/3560cr/cli1.html#wpmkr11908996
What's funny is while the exec commands don't work, the config-mode commands do.
Switch#power rps name serialnumber
Can not execute cmd on legacy switch 1
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#power rps deviceid serialnumber
Oh well. I've been wanting to replace the 3560s with 3750Gs, so this is yet another reason to do so!

Very strange behavior with to_date and format 'yddd' after 31/12/2009

Hi, I have the following PL/SQL code which retrieve a date from a production batch code as fallow:
DECLARE
dtmDateFabric DATE;
BEGIN
-- on teste si l'on peut reconstituer la date fabric à partir du code lot
dtmDateFabric := TO_DATE ('9348', 'yddd');
DBMS_OUTPUT.put_line ('dtmdatefabric ' || dtmDateFabric);
END;
batch code is constitued like this: YDDD year of production and day number in year.
This code was perfectly working before 2010 and it used to return December 14, 2009.
And now the same code returns December 14, 2019.
And I can't use 'rddd' as format.
Any idea to resolve this issue ?
Thank's for help.
Olivier

It's not strange at all, we are in 2010 now, so if don't specify the decade, century and millennium it takes the current: 2 (millennium) 0(century) 1(decade) and your year becomes 2019...
You have to add a byte to your year format to specify the decade:
SQL> DECLARE
2 dtmDateFabric DATE;
3 BEGIN
4 -- on teste si l'on peut reconstituer la date fabric à partir du code lot
5 dtmDateFabric := TO_DATE ('09348', 'yyddd');
6 DBMS_OUTPUT.put_line ('dtmdatefabric ' || dtmDateFabric);
7 END;
8 /
dtmdatefabric 14-12-2009 00:00:00
Procedura PL/SQL completata correttamente.And you'll be ok untill 2099...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/07/creare-documenti-office-da-plsql/]
Edited by: Massimo Ruocchio on Jan 8, 2010 4:40 PM
Added explaination

Strange behavior with Premiere and effects in CS6

Hello
I created a PS file with several layers of a subject for a TV show idea i am preparing for a presintation but every time a render my effects are not as i see them., speciffialy the 8-16 point Garbage mattes and keying.
The PS files where dragged and dropped into Premiere and as Sequences to maintin them in folders and in a Nested Sequence.,
Then i sort of sequences masked PS layers, using Ultra key to punch out the greene screen, 8/16 point Gabrage mattes to take out any other noise or background images un wanted, MOJO to warm up the subject i then placed the sequence as a NESTED sequence in my time line, but when i would render the Garbage Mattes, keying and all would be partially showing a previous tweek, but when i open the nested Sequence i would not see these errors or older tweeks, yet in the main Sequence aka composition i would see them yet when i would place the mouse over the time line to select an area for the position to play they would go away again,
sounds like a bug?
OSX10.7.4
imac i7 12GB
8TB RAID
CS6 Suite
Message was edited by: Andrew Yoole
This message was relocated from the After Effects Forum.

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior of kMoveStoryRangeCmdBoss and kCopyStoryRangeCmdBoss

Hi All,
I use ITextUtils::QueryMoveStoryCommand with ignoreAttributes = kFalse to move text between text frames, while preserving text formating.
But there were some cases when text formatting was not preserved. I have tryed ITextUtils::QueryCopyStoryCommand on these frames and everything worked ok.
Any help will be of great value!
Regards,
Oleg

I looked up the reviews for your drive on newegg.com and found the following comments that might be relevant:
+Pros: This drive replaced an 80gb drive in my mac mini. I've had no problems over the last year, it's been reliable and quiet. Good price for the capacity. The drive is optimized for streaming, so dumping movies and music to it is a good fit.+
+Cons: The drive was optimized for streaming, so any type of random reads or writes results in very low performance. It would work good as a media center hard drive, but this drive is actually slower on random read/write benchmarks than the 4200 rpm drive it replaced.+
and
+Pros: Drive worked, it was cheap, seems to be decent quality. Built for streaming+
+Cons: Built for streaming, not random access. Random accesses are painfully slow.+
+Other Thoughts: I used this to replace my Mac Mini's factory hard drive. It gave me much more space, and I also figured the improved 5400rpm spindle speed couldn't hurt. I definitely have more space, but the drive is pretty slow.+

Strange behavior of db update in debugging and no debugging execution mode

Hi Experts,
I am finding a strange behavior of certain Z update function (to update equipment install base) : The update happens perfectly if I go into debug mode and do a F6 on the function call. But if I executed it completed without going in debug mode, that update does not happen!
I checked the function and found that it does have COMMIT WORK AND WAIT which gets triggered every time I call this function.
Also does compiling the code with some changes and executing in cycles have any affect on the behavior of code? Do I need to do a /nse38 every time, before I do executing? I am not sure this is in any way related to the problem.
Will appreciate your helpful responses on this.
Best regards,
Vishnu T

Withing the Z function, it is the calls to SAP standard functions that are doing the update. Here is the function body
FUNCTION Z_B_BAPI_EQMT_INSTALLHR.
*"*"Local interface:
*"       IMPORTING
*"             VALUE(EQUIPMENT) LIKE BAPI_EQUI-EQUIPMENT
*"             VALUE(SUPEREQUI) LIKE BAPI_EQHR-SUPEREQUI
*"             VALUE(POSEQUI) LIKE BAPI_EQHR-POSEQUI OPTIONAL
*"             VALUE(DATE) LIKE SY-DATUM DEFAULT SY-DATUM
*"             VALUE(TIME) LIKE SY-UZEIT DEFAULT SY-UZEIT
*"             VALUE(COMMIT) LIKE VBMOD-VBMODE DEFAULT SPACE
*"       EXPORTING
*"             VALUE(EQUIMASTER) LIKE BAPI_EQUI STRUCTURE BAPI_EQUI
*"             VALUE(EQUITIME) LIKE BAPI_EQUZ STRUCTURE BAPI_EQUZ
*"             VALUE(EQUITEXT) LIKE BAPI_EQKT STRUCTURE BAPI_EQKT
*"             VALUE(EQUILOCATION) LIKE BAPI_ILOA
*"                             STRUCTURE BAPI_ILOA
*"             VALUE(EQUISALES) LIKE BAPI_EQSD STRUCTURE BAPI_EQSD
*"             VALUE(EQUIHIERARCHY) LIKE BAPI_EQHR
*"                             STRUCTURE BAPI_EQHR
*"             VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
CLEAR: EQUIMASTER, EQUITIME, EQUITEXT, EQUILOCATION.
CLEAR: EQUISALES, EQUIHIERARCHY, RETURN.
* Object key must not be initial.
IF EQUIPMENT IS INITIAL.
    CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
         EXPORTING
              MSG_CLASS = 'IS'
              MSG_TYPE   = 'E'
              MSG_NUMBER = '498'
              MSG_PARM1 = 'EQUIPMENT'
         IMPORTING
              RETURN     = RETURN.
    EXIT.
ENDIF.
* Superior equipment must not be initial.
IF SUPEREQUI IS INITIAL.
    CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
         EXPORTING
              MSG_CLASS = 'IS'
              MSG_TYPE   = 'E'
              MSG_NUMBER = '498'
              MSG_PARM1 = 'EQUIPMENT'
         IMPORTING
              RETURN     = RETURN.
    EXIT.
ENDIF.
* Specified equipment number must exist.
PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
    USING                                                   "P9CK056992
      EQUIPMENT "->equipment number                         "P9CK056992
      'X'       "->record must exist (will be read)         "P9CK056992
      'X'       "->record must be locked                    "P9CK056992
      NEW_VEQUI "<-before image read                        "P9CK056992
      I_CODE.   "<-error code                               "P9CK056992
IF I_CODE <> 0.
    CALL FUNCTION 'MESSAGE_CONVERT'
         EXPORTING
              SY_SUBRC = 4
         IMPORTING
              RETURN   = RETURN
         EXCEPTIONS
              OTHERS   = 1.
    EXIT.
ENDIF.
* Superior equipment must exist.
PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
    USING                                                   "P9CK056992
      SUPEREQUI "->superior technical object number         "P9CK056992
      'X'       "->object must exist (will be read)         "P9CK056992
      SPACE     "->object will not be locked                "P9CK056992
      OLD_VEQUI "<-object data read                         "P9CK056992
      I_CODE.   "<-error code                               "P9CK056992
IF I_CODE <> 0.
    CALL FUNCTION 'MESSAGE_CONVERT'
         EXPORTING
              SY_SUBRC = 4
         IMPORTING
              RETURN   = RETURN
         EXCEPTIONS
              OTHERS   = 1.
    EXIT.
ENDIF.
* Install equipment
CALL FUNCTION 'EQUIPMENT_INSTALL'
       EXPORTING
            READ_SOBJ   = ' '
            READ_ROBJ   = ' '
            LOCK_SOBJ   = ' '                               "P9CK056992
            POSEQUI     = POSEQUI
            I_DATE      = DATE
            I_TIME      = TIME
            EXEC_MEAS   = 'X'                               "P9CK159924
       CHANGING
            S_EQUI      = NEW_VEQUI
            R_EQUI      = OLD_VEQUI
       EXCEPTIONS
            ERR_INSTALL = 1
            OTHERS      = 2.
I_CODE = SY-SUBRC.
* Fill return structure.
CALL FUNCTION 'MESSAGE_CONVERT'
       EXPORTING
            SY_SUBRC = I_CODE
       IMPORTING
            RETURN   = RETURN
       EXCEPTIONS
            OTHERS   = 1.
IF RETURN-TYPE <> 'S'.                                    "P9CK056992
    PERFORM EQUIPMENT_UNLOCK USING EQUIPMENT.               "P9CK056992
    EXIT.                                                   "P9CK056992
ENDIF.                                                    "P9CK056992
* Copy local view structure to export structures.
PERFORM MOVE_VIEW_TO_EQUIPMENT USING NEW_VEQUI EQUIMASTER EQUITIME
                                       EQUITEXT EQUILOCATION EQUISALES
                                       EQUIHIERARCHY.
CALL FUNCTION 'CHECK_COMMIT'
       EXPORTING
            COMMIT_MODE              = COMMIT
       EXCEPTIONS
            ERR_COMMIT_WORK_AND_WAIT = 1
            OTHERS                   = 2.
ENDFUNCTION.
The COMMIT parameter is passed with value 'S' which is an indication to CHECK_COMMIT to do COMMIT WORK AND WAIT. And I am always passing an S and as I said that the update in fact does happen if I do a F6 on the CALL to the above function.

UWL configuration - strange behavior

Ciao SDN,
i'm trying to configure UWL (again!!).
When i go through
System Admin>System Configuration>Universal Worklist & workflow> Universal Worklist
i got the message: "The specified root item cannot be retrieved from the configuration. Correct the entry before trying again."
This is a very strange behavior, because some time ago i had already configured UWL and all works fine.
Help me...
Luca

Hi Luca,
Please have a look at this thread.
SAP Enterprise Portal : Administration and Development
Regards,
Sumit

IMac mouse problems / strange behavior (impossible to configure mouse preferences)

I work in a design and communication school, the used hardware is iMac (Intel) whit Lion (OS X 10.7), we have several rooms equipped with these Macs where students light up their data on the server.
Today, 3 of these Macs had problems with the mouse, including mine.
Basically the clicks don´t work correctly. We cant close windows, open folders or change some options by clicking, but we can open softwares, scroll.
In safari if i search something, when I try to click the link i want, safari opens a new tab instead the one i am at, and has other strange behaviors. So I´ve tried to change the mouse settings, and when i make a change, for example: change the scroll button to "buttun 3" the mouse automatically assumes all buttons to dashboard, but not at the configurations window because it says that scrool button still "button 3", when i use the click or the scroll or any button it just slid me to dashboard or a setting that has nothing to do with my option.
This is really causing a big problem since we are a school.. I already tried to change the mouse, clean, try another usb ports, search for update or restart but it still doing the same.
I think it have something to do with an update.. but not sure.. would be really gratefull if someone knows how to solve this.
As a temporary solution,i disabled all options using only the mouse click, but to do it, i had to plug in my tablet (that works perfectly for the record) and use it instead of mouse (since it was impossible to use it), than went to mouse preferences and disable left click, scroll and side buttons and then restart the Mac (or else it wont work)..
it will work fine but still a problem cause I use all mouse buttons custom as well as the students...

I have been experiencing a freezing mouse as well. I updated the mouse drivers but it is still happening. I have been repairing the permissions and noticed something very strange see the mention of a -t. I have been running unix systems since 1984 and have never seen that before....
Determining correct file permissions.
Permissions differ on ./Library, should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on ./Library
Permissions corrected on ./Library
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Permissions repair complete
Permissions differ on ., should be drwxrwxr-t , they are drwxr-xr-x
Owner and group corrected on .
Permissions corrected on .
The privileges have been verified or repaired on the selected volume
I reported this to Apple and they told me to erase the hard drive reinstall the
system. I really don't want to have to do that. It seems like something is taking
control of the machine.....

I get a strange behavior of the tab bar and of the location bar in Firefox 29.0 for Mac.

I have just installed Firefox 29.0 for Mac.
I get a strange behavior of the tab bar and of the location bar with this new version.
Instead of the location bar, I get two rows of symbols. And it's impossible to write anything in the location bar.
(I'd like to add a screenshot, but I cannot find a way to do it.)

Thank you for your tip.
I found the culprit: it was an extension called RSS Icon 1.0.6.
I removed it and now Firefox 29.0 is working perfectly.
Now I'll have to find a replacement for that extension.
Thank you once again. Your tip was essential.

Strange behavior in the top link bar and open in a new tab

Hello,
I am having a strange behavior in the top link bar. Every element in the menu has the "open in a new tab"-option checked and is working fine but is not working at all in a sub site which inherit the menu.
I have look at the code thinking that the menu in the sub site did't get the target="_blank" but is there.
Anyone who knows what can be happening?
Thanks!!!!
Discusion actualizada

No worries, I found the problem.
Strange but Minimal download strategy feature cause the problem. I unactivated it and everything works fine.
Discusion actualizada

Strange behavior by OMBIMPORT and configuration defaults

Similar Messages

Maybe you are looking for