Strange benchmark result need some explanation

I was testing the efficiency of the transpose function in Labview so I did a simple test setup starting with by using a constant as source. At some time I changed the constant to a control, and the processing time dropped from about 4200 msec to a number between 1 and 2 msec. I could reproduce the result at every run. Why is it like this?
I include my test VI in 8.0
Edit: I was using Labview 8.6 for this test, and Could not see any major differences in buffer allocations
Message Edited by Coq Rouge on 07-29-2009 10:51 AM
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
transpose_test.vi ‏196 KB

Thank you for your answer Rolf. And to be honest this behavior do not cause any problem for me. I wanted to see if the transpose array could cause any problem for me regarding timing. The transpose array function is more than fast for my amount of data(2x20000 dbl) . But in the future, if I need an big array constant. I will test and see if a control set to default values and hidden, perform better.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

[AIR_on_ANDROID] Needs some explanations

Hi guys,
I'm an italian flash programmer. I'm so happy that I can finally build apps fdor android and iPhone too. This wouyld be great for my job.
But first I need some explanations to some issues I found:
1 If the new Flash CS5 extension allows us to compile a native Android application (.apk file), why people needs to install AIR runtime on its phone? IT shouldn't be just like iPhone and its packeger?
2 Why when I do set the publish settings to "AIR Android", the functionality "Control -> Test Movie -> In device central" goes off?
3 Since I installed the Android ext, every time I start a new AIR 2 project the publish settings goes automatically in "AIR Android". The I set it on "Adobe AIR 2", but when I try to compile it give me always the same error:
"Error creating file"
"Name file is invalid in the descriptor file"
Thank you for help.
P.S. I use Flash Cs5 in windows Vista x32.

Well, the latest extension (09/30/10) has some issues qhen you try to visualize "Android settings":
"The following JavaScript error(s) occurred:
At line 1 of file "Apollo_OpenSettingDialog.jsfl":
ReferenceError: Air2_5_Android is not defined"
This is a bug a lot of people in internet found. So the only solution was to install an older release (09/23/10 works fine on it).
After all, I tried to run an .apk on Desire HD emulated by Device Central Cs 5, but it occured an error "file not supported on this device".
I suppose that device central smartphones are still not update, right?
Thanks for your time. I really appreciate that

Need some explanation on nested AMs

Hello OTN,
Need some explanation on nested application modules.
It is descibed in several posts and videos that each AM holds its own connection and to reduce connection number we nest AMs under RootAM.
So, I have the master application with a RootAM.
There are some detail applications imported into RootViewController project as ADF libraries. Each containing a taskflow to use on a main page and an application module.
So in the Data Controls I have RootAM + all of imported. Each holding its own connection. To reduce it I want to nest importeed AMs under RootAM.
But in RootAM DataModel - Appliaction Module Instances there is just RootAM and nothing more. Seems, RootModel project is not aware of imported AMs.
http://img72.imageshack.us/img72/4964/nestam.png
So I deploy each detail Model project as an ADF Library and import it into RootModel project. OK, now I see imported AMs in Application Module Instances section and I can nest them.
After doing so I open Data Controls section inteding to see only RootAM on the top level, but still there are each of imported AMs on the top level and there are nested AMs under RootAM also.
http://img7.imageshack.us/img7/5042/nestam2.png
Seems, I've done something wrong.
Could someone explain me, please?
Thanks.
ADF 11.1.2.1

I don't think that you made an error. Is just the way application module are imported. You see the nested ones under your root application module and you see the same as root application module on the same level as your real application module.
It all depend on which one you use. You can however control which artifacts you see in the data control. Check Chris Muirs bloghttp://one-size-doesnt-fit-all.blogspot.com/2011/02/jdev-adf-bc-and-adf-libraries-library.html about this.
Timo

A VERY Strange Issue. Need some help... !!!

Ok, so here is the issue that I notice a few weeks ago... I have the 2.8Ghz 24" iMac, I think the earlier alum. one... Anyway I have a 320Gb Hard drive... Well I looked at it recently and I noticed that it claims that I am using 234 GB of my hard drive!!! And I don't think that there is ANY way for this to be possible. I have never been the type of person to "fill up" hard drive space. Never maxed out an iPod, even a 16Gb touch! I only have like 16Gb total of iTunes music, movies, TV etc. And I can't think of anything else that could take up so much Hard drive. I have boot camped my iMac, but I gave it the default 32Gb. So 32Gb there, 16Gb of iTunes and maybe a few more Gb from various things... IT DOESN'T ADD UP!!! Does anyone have a clue what could have happened? I first noticed this before I bootcamped my iMac. So if YOU have any info that could help me, it would be GREATLY appreciated! I need my hard drive back!
Thanks!

You can use a program such as
http://www.omnigroup.com/applications/omnidisksweeper/
http://grandperspectiv.sourceforge.net/
http://www.derlien.com/
(all freeware) to analyze disk space usage.

Need some explanations regarding static Method

Hello,
I have a code where a class has a static method access by other classes. This not working as I thought and I would like to understand why.
Here below is the code.
Here is a class having the static method "test"
package test;
public class StaticTest {
    public StaticTest() {
    public static void test (int i){
    while (i < 1000){
        System.out.println("i = " + i );
        i++;
}Here is the code of another class (Thread) using this static method. This Thread can be initialized with an integrer value that will be passed to the static Method.
package test;
public class ThreadTester extends Thread {
    int x;
    public ThreadTester(int i) {
        x=i;
    public void run(){
        StaticTest.test(x);
}Here is the code starting 2 Thread running in parallel and both are then calling the static method.
//start 2 thread accessing the static method.
      ThreadTester test1 = new ThreadTester(0);
      ThreadTester test2 = new ThreadTester(200);
      test1.start();
      test2.start();
...As the second thread is started with a bigger value I thought that we would only have seen few printouts from the first thread starting by 0 and then printouts starting by 200.
Here is what I thought regarding the result:
i = 0
i = 1
i = 2
i = 3
i = 200 --> startup of the second thread, x in static method is overriden (at least this is what I thought!)
i = 201
i = 202
i = 203
i = 204
i = 205
i = 206
i = 207
i = 208
i = 209
But the real result is:
i = 0
i = 1
i = 2
i = 3
i = 4
i = 5
i = 200
i = 6
i = 201
i = 202
i = 203
i = 204
i = 205
i = 206
i = 7
i = 207
i = 208
i = 209
i = 8
It seems that there is 2 instances running in parallel. I thought that it would'nt be the case with the word "Static".
Also I don't understand the result because if I use JBuilder in Optimizer mode I can see that there is only one instance of StaticTest object.
Can anyone here explain me how is that possible?
Thanks in advance for your help.
Regards,
Alain.

>
thread test1 creates its own stack and starts incrementing �i� starting at values 0. However, in the middle of incrementing, it gets kicked out by the OS (or JVM) into a �blocked� state to allow other threads to run. BUT before leaving the running state, test1 saves the stack state including the value of �i�.
>
Ok, now I understand, but then I have another question.
What is the difference between the code shown in my first post and the following where we create 2 instances of StaticTest class (which is not static in this case for sure).
How to decide (while coding) if it is better to use difference instances of class or not?
package test;
public class StaticTest {
    public StaticTest() {
    public void test (int i){ //Not static anymore
    while (i < 1000){
        System.out.println("i = " + i );
        i++;
}We create new instance in the Thread.
package test;
public class ThreadTester extends Thread {
    int x;
    public ThreadTester(int i) {
        x=i;
    public void run(){
StaticTest newInstance = new StaticTest(); //Create a new instance
        newInstance .test(x);
}Alain

JBI Bridge Video..... need some explanation...

hi *,
i just saw this video on caps site about JBI Bridge:
http://developers.sun.com/docs/javacaps/tutorials/screencasts/jbi-bridge/launch.html
i have two questions:
can someone describe me the basical steps that are done on the video (besides the jcd things i know them from the "old world")
can someone give me some usecases where such scenarios would make sense?
regards chris

I agree with slowing it down just a bit.
Also and maybe this is part of the tutorial overview but a use case in which the tutorial is addressing.
For example when I saw this the first thing that came to my mind was using this to bridge older versions like SRE does to the newer version and also invoking the business process to tie into a graphical type of monitoring. Maybe not for realtime but near real time. I would preface I am in health care so not sure if it could be used to monitor connection of the inbound consumer or hl7 binding component and then follow the data thru.
So I thought of a billing batch type job where it would be leveraged to say have a batch hl7 binding component sending the billing on its way and then invoking the bp to utilize a wsdl to report on batch header or batch amount and destination of the delivery?

Need some explanation about statefull-bean

Hi.
I want to develop a statefull session bean that should store user information - userName of the logged user for example. So I create that bean in my login action and store that information therin (set that field). Then in other action I want to check if the user is logged. Should I create a new instance of the bean?? I do so but the persistent field is null and the user information from login action is lost.
Are there any extra procedures that Statefull Bean should provide??.
Bartek

When using a StatefulSessionBean (SFSB), you should get the Handle of the Remote and pass that along in your HTTP session. This allows your "user session" to maintain state across pages via the SFSB. If you do not, then (as you noticed), you'll "lose" the stateful information because you end up creating/using another instance.

I need some explanation about @manytomany annotation.

Hi
Thank you for reading my post.
imagine the following sample code, please let me know what would be the tables and their relation. Thanks.
In Customer class:
    @ManyToMany(targetEntity=com.acme.PhoneNumber.class)
    public Set getPhones() { return phones; }In PhoneNumber class:
    @ManyToMany(targetEntity=com.acme.Customer.class, mappedBy="phones")
    public Set getCustomers() { return customers; }Thanks

Go to the ATT website. Or contact ATT customer service.

Some explanation needed

Hi all,
I'm new for all the adobe application development.
I don't realy underestend if I can create some PDF documents with the InDesine Script without to open the InDesign tool.
Can youi please explain me how to do this? and if it not posible do you know with wich tool can I do this thing?
Thanks
Yael

Hi Yael,
I need some explanation of your question, too.
Do you want to 'convert' InDesign-documents to PDF-files without opening InDesign?
That is not possible.
Do you want to export PDF-files out of opened (or closed - to be opened) InDesign-documents with InDesign-application opened but without any dialog?
That is possible.
What do you mean with 'the InDesign tool'?
Do you mean the application InDesign or the dialog to export PDF-format out of a document?
Martin

Need some help with strange sounds in Logic Pro 8

Hi!
I need some help with a problem I have in Logic Pro 8.
When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
Martin

Hi Martin
Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
Which mac?
Which OS?
any hardware devices?
if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
Don

I need some help for an explanation. Loop for 1 minute.

          int minute=1;
          long currentTime=System.currentTimeMillis();
          long stoppingTime = currentTime + (minute * 60 * 1000);
          while (currentTime<stoppingTime) {
               // do x;
               currentTime=System.currentTimeMillis();
          }I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.

Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
    int minute=1;
    long currentTime=System.currentTimeMillis();
    long stoppingTime = currentTime + (minute * 15 * 1000);
    System.out.println("START Time: "+currentTime);
    while (currentTime<stoppingTime) {
      currentTime=System.currentTimeMillis();
    System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000

Benchmark results for WLS

Are there any public benchmark results available for WLS ? I have a customer who wants to see how WLS scales. They want to see performance and benchmark results.
Can you PLEASE send me any reliable benchmark results.
Thank a million.

Michael,
I actually need some data to analyze. Please advise if BEA has anything like that.
Thanks
KK
"Jim Baiter" <[email protected]> wrote:
>
But is there an actual benchmark study to refer to. I could
use this for some sizing of estimates - I don't need marketing
collateral.
"Michael Girdley" <[email protected]> wrote:
We scale very well. Our largest deployments number between 60-70+ CPUs:
http://www.bea.com/press/releases/2000/1004_planet_project_wls.html
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Kubo Kushi" <[email protected]> wrote in message
news:39f797e8$[email protected]..
Are there any public benchmark results available for WLS ? I have
a
customer who wants to see how WLS scales. They want to see performanceand
benchmark results.
Can you PLEASE send me any reliable benchmark results.
Thank a million.

DO i need some extra hardware interface for receving both Audio and video

hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
     config= new Config();
     GridBagLayout gridBagLayout= new GridBagLayout();
     GridBagConstraints gbc;
     JPanel p= new JPanel();
     p.setLayout( gridBagLayout);
     JPanel localPanel= createLocalPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.gridwidth= 2;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
     p.add( localPanel);
     JPanel targetPanel= createTargetPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 1;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
     JPanel mediaPanel= createMediaPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 2;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
     update.setEnabled( false);
     rtcp.addActionListener( this);
     update.addActionListener( this);
     buttonPanel.add( rtcp);
     buttonPanel.add( update);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 3;
gbc.gridwidth= 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
     p.add( buttonPanel);
getContentPane().add( p);
     list.addMouseListener( this);
     addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "Media Locator:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_media_file= new JTextField( 35);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
     p.add( tf_media_file);
     tf_media_file.setText( config.media_locator);
     cb_loop= new JCheckBox( "loop");
     startXmit= new JButton( "Start Transmission");
     startXmit.setEnabled( true);
     startXmit.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 2;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
     p.add( cb_loop);
     cb_loop.setSelected( true);
     cb_loop.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
     p.add( startXmit);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
     p.setBorder( titledBorder);
     return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     targets= new Vector();
     for( int i= 0; i < config.targets.size(); i++) {
     targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
     list.addKeyListener( this);
     list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
     p.add( scrollPane);
JPanel p1= new JPanel();
     p1.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_address= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
     p1.add( tf_remote_address);
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
     p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
     p2.add( addTarget);
     p2.add( removeTarget);
     addTarget.addActionListener( this);
     removeTarget.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.gridwidth= 2;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 20,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
     p1.add( p2);
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
     p.add( p1);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
     p.setBorder( titledBorder);
     return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     JTextField tf_local_host= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
     p.add( tf_local_host);
     try {
String host= InetAddress.getLocalHost().getHostAddress();
     tf_local_host.setText( host);
     } catch( UnknownHostException e) {
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
     p.add( tf_data_port);
     tf_data_port.setText( config.local_data_port);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
     p.setBorder( titledBorder);
     return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
     if( source == addTarget) {
     String ip= tf_remote_address.getText().trim();
     String port= tf_remote_data_port.getText().trim();
     String localPort= tf_data_port.getText().trim();
     addTargetToList( localPort, ip, port);
     if( avTransmitter != null) {
     avTransmitter.addTarget( ip, port);
     } else if( source == removeTarget) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          if( avTransmitter != null) {
     avTransmitter.removeTarget( target.ip, target.port);
          targets.removeElement( target);
          listModel.setData( targets);
     } else if( source == startXmit) {
     if( startXmit.getLabel().equals( "Start Transmission")) {
     int data_port= new Integer( tf_data_port.getText()).intValue();
          avTransmitter= new AVTransmitter( this, data_port);
     avTransmitter.start( tf_media_file.getText().trim(), targets);
          avTransmitter.setLooping( cb_loop.isSelected());
     startXmit.setLabel( "Stop Transmission");
     } else if( startXmit.getLabel().equals( "Stop Transmission")) {
          avTransmitter.stop();
          avTransmitter= null;
          removeNonBaseTargets();
          listModel.setData( targets);
     startXmit.setLabel( "Start Transmission");
     } else if( source == rtcp) {
     if( rtcpViewer == null) {
     rtcpViewer= new RTCPViewer();
     } else {
          rtcpViewer.setVisible( true);
          rtcpViewer.toFront();
     } else if( source == cb_loop) {
     if( avTransmitter != null) {
          avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
     String localPort= tf_data_port.getText().trim();
     for( int i= targets.size(); i > 0;) {
     Target target= (Target) targets.elementAt( i - 1);
     if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
     i--;
public void addTargetToList( String localPort,
                         String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
                              port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
     if( rtcpViewer != null) {
     rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
     config.local_data_port= tf_data_port.getText().trim();
     config.targets= new Vector();
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( config.local_data_port)) {
          config.addTarget( target.ip, target.port);
     config.media_locator= tf_media_file.getText().trim();
     config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          tf_remote_address.setText( target.ip);
          tf_remote_data_port.setText( target.port);
     int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
     this.options= options;
public int getSize() {
     int size;
     if( options == null) {
     size= 0;
     } else {
     size= options.size();
     return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
     Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
     } else {
     name= null;
     return name;
public void setData( Vector data) {
     options= data;
     fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
               TargetListModel listModel, Vector targets) {
     this.localPort= localPort;
     this.ip= ip;
     this.port= port;
     this.listModel= listModel;
     this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
     if( !targetExists( localPort, ip, port)) {
     targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
     boolean exists= false;
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( localPort)
     && target.ip.equals( ip)
          && target.port.equals( port)) {
          exists= true;
     break;
     return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
     this.tx= tx;
     local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
     String result;
     locator= new MediaLocator( filename);
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null) {
     return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter( targets);
     if (result != null) {
     processor.close();
     processor = null;
     return result;
     // Start the transmission
     processor.start();
     return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     localPorts = new int[ pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     // for (int i = 0; i < 1; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
          port = local_data_port + 2*i;
          localPorts[ i]= port;
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addReceiveStreamListener(this);
          rtpMgrs[i].addRemoteListener(this);
     for( int k= 0; k < targets.size(); k++) {
          Target target= (Target) targets.elementAt( k);
          int targetPort= new Integer( target.port).intValue();
          addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          e.printStackTrace();
          return e.getMessage();
     return null;
public void addTarget( String ip, String port) {
     for (int i= 0; i < rtpMgrs.length; i++) {
     int targetPort= new Integer( port).intValue();
     addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     mgr.addTarget( addr);
     tx.addTargetToList( localPort + "", ip, port + "");
     } catch( Exception e) {
     e.printStackTrace();
public void removeTarget( String ip, String port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
     } catch( Exception e) {
     e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
     System.out.println( ce);
     if( ce instanceof DurationUpdateEvent) {
     Time duration= ((DurationUpdateEvent) ce).getDuration();
     System.out.println( "duration: " + duration.getSeconds());
     } else if( ce instanceof EndOfMediaEvent) {
     System.out.println( "END OF MEDIA - looping=" + looping);
     if( looping) {
     processor.setMediaTime( new Time( 0));
          processor.start();
public void setLooping( boolean flag) {
     looping= flag;
public void update( ReceiveStreamEvent event) {
     String timestamp= getTimestamp();
     StringBuffer sb= new StringBuffer();
     if( event instanceof InactiveReceiveStreamEvent) {
     sb.append( timestamp + " Inactive Receive Stream");
     } else if( event instanceof ByeEvent) {
     sb.append( timestamp + " Bye");
     } else {
     System.out.println( "ReceiveStreamEvent: "+ event);
     tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
     String timestamp= getTimestamp();
     if( event instanceof ReceiverReportEvent) {
     ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
     StringBuffer sb= new StringBuffer();
     sb.append( timestamp + " RR");
     if( rr != null) {
          Participant participant= rr.getParticipant();
          if( participant != null) {
          sb.append( " from " + participant.getCNAME());
          sb.append( " ssrc=" + rr.getSSRC());
          } else {
          sb.append( " ssrc=" + rr.getSSRC());
          tx.rtcpReport( sb.toString());
     } else {
     System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
     String timestamp;
     Calendar calendar= Calendar.getInstance();
     int hour= calendar.get( Calendar.HOUR_OF_DAY);
     String hourStr= formatTime( hour);
     int minute= calendar.get( Calendar.MINUTE);
     String minuteStr= formatTime( minute);
     int second= calendar.get( Calendar.SECOND);
     String secondStr= formatTime( second);
     timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
     return timestamp;
private String formatTime( int time) {
     String timeStr;
     if( time < 10) {
     timeStr= "0" + time;
     } else {
     timeStr= "" + time;
     return timeStr;
* Stops the transmission if already started
public void stop() {
     synchronized (this) {
     if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTargets( "Session ended.");
          rtpMgrs[ i].dispose();
public String createProcessor() {
     if (locator == null) {
     return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
     ds = javax.media.Manager.createDataSource(locator);
     } catch (Exception e) {
     return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
     processor = javax.media.Manager.createProcessor(ds);
     processor.addControllerListener( this);
     } catch (NoProcessorException npe) {
     return "Couldn't create processor";
     } catch (IOException ioe) {
     return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
     return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
     return "Couldn't find tracks in processor";
     // Set the output content descriptor to RAW_RTP
     // This will limit the supported formats reported from
     // Track.getSupportedFormats to only valid RTP formats.
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     Format supported[];
     Format chosen;
     boolean atLeastOneTrack = false;
     // Program the tracks.
     for (int i = 0; i < tracks.length; i++) {
     Format format = tracks[i].getFormat();
     if (tracks[i].isEnabled()) {
          supported = tracks[i].getSupportedFormats();
          // We've set the output content to the RAW_RTP.
          // So all the supported formats should work with RTP.
          // We'll just pick the first one.
          if (supported.length > 0) {
          if (supported[0] instanceof VideoFormat) {
               // For video formats, we should double check the
               // sizes since not all formats work in all sizes.
               chosen = checkForVideoSizes(tracks[i].getFormat(),
                                   supported[0]);
          } else
               chosen = supported[0];
          tracks[i].setFormat(chosen);
          System.err.println("Track " + i + " is set to transmit as:");
          System.err.println(" " + chosen);
          atLeastOneTrack = true;
          } else
          tracks[i].setEnabled(false);
     } else
          tracks[i].setEnabled(false);
     if (!atLeastOneTrack)
     return "Couldn't set any of the tracks to a valid RTP format";
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // audio frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
     int width, height;
     Dimension size = ((VideoFormat)original).getSize();
     Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
     Format h263Fmt = new Format(VideoFormat.H263_RTP);
     if (supported.matches(jpegFmt)) {
     // For JPEG, make sure width and height are divisible by 8.
     width = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
     height = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
     } else if (supported.matches(h263Fmt)) {
     // For H.263, we only support some specific sizes.
     if (size.width < 128) {
          width = 128;
          height = 96;
     } else if (size.width < 176) {
          width = 176;
          height = 144;
     } else {
          width = 352;
          height = 288;
     } else {
     // We don't know this particular format. We'll just
     // leave it alone then.
     return supported;
     return (new VideoFormat(null,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    null,
                    Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realiz

I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works

Need some clarification on Replacement Path with Variable

Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
Lavanya

Hi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy

My airport problem has returned big time --Need some Help!!

Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
Dan

First, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results.

Strange benchmark result need some explanation

Similar Messages

Maybe you are looking for