Strange bug with CC panel and OS X Spaces
I seem to have a strange bug where the CC panel opens each time I switch spaces in OS X (click on the GIF animation below). Anyone else have this problem?
Hi Lee ,
This has been already notified to the engineering team.
http://forums.adobe.com/message/5421355#5421355
Thanks,
Manish
Similar Messages
-
Strange issue with USB mouse and USB headset.
Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts? -
FORMS IN go daddy - email forms, anyone know whats happening with c-panel and adobe email forms...
FORMS IN go daddy - email forms, anyone know whats happening with c-panel and adobe email forms...
Hi,
Can you please provide the URL of your website ? And also the email address to which you are trying to send the form.
Regards,
Rohit Nair -
I am having problems with Time Machine and having enough space to finish my last back up.
I am having problems with Time Machine and having enough space to finish my last back up.
Take a look at this link, http://support.apple.com/kb/HT1427
-
Very strange bug with compareTo: returning incorrect results
Hello everyone! I have used the method compareTo many times to maintain my database project's entries. However recently I have discovered a bug, in which:
a and b both being Storage type objects:
private static class Storage {
object data
int nextData //an array stores the Storage objects
int previousData //this uses an integer to locate previous in array
Problem:
((Comparable)(a.data)).compareTo((Comparable)(b.data)) returns a 3, when a.data is clearly 5, and b.data is clearly 20.
This is very strange, as the compareTo should return a -1 instead of a positive number. Is this a known bug with the compareTo method? I have been using it reliably for many programs but this is the first time it ever occurs to me.Problem:
((Comparable)(a.data)).compareTo((Comparable)(b.data))
returns a 3, when a.data is clearly 5, and b.data is
clearly 20.
This is very strange, as the compareTo should return a
-1 instead of a positive number. Is this a known bug
with the compareTo method? I have been using it
reliably for many programs but this is the first time
it ever occurs to me.Not really... comparing Strings "5" to "20"
is really the same as comparing "5" to "2"
being the first character of the string, difference
being, surprise, surprise = 3.
If you want the Strings to be comparable that way you should left-fill them with spaces or zeros.
Or, better still, override compareTo and make your Storage implement Comparable instead of all that casting of the data objects. -
Strange bug with the java.io.File class
Hi everibody!
I'm writting a system to upload images with JSF and RichFaces. But when i try to delete the images files sometimes hapen some strange bug.
first i'll post my method code here:
public void deleteUploadedFile(ActionEvent event) throws Throwable {
UIComponent link = event.getComponent();
UIParameter param = (UIParameter) link.findComponent("fileId");
TheFile file = this.uploadedFiles.get((Integer) param.getValue());
try {
File f = new File(file.getPath(), file.getName());
if ((f.exists()) && (f.canRead()) && (f.canWrite())) {
if(f.delete()){
for(int i=0; i<file.getThumbs().size(); i++){
File t1 = new File(file.getPath(), file.getThumbs().get(i).getThumbName());
t1.delete();
setDeleted(true);
else{
setDeleteLog("Arquivo não pode ser excluido");
setDeleted(false);
} else {
setDeleteLog("Erro ao tentar excluir o arquivo");
setDeleted(false);
this.finalize();
} catch (Exception ex) {
setDeleteLog("Deu erro: " + ex);
} finally {
if (this.deleted) {
if (this.uploadedFiles.remove(file)) {
setDeleteLog("Conseguiu remover");
} else {
setDeleteLog("Deu erro");
}Well, when the method run the f.delete() line, sometimes, something strange hapen. With is, the file data is deleted as expected, but the file it self is not deleted. And even when i run the line this.finalize the JVM still using the file, with don't allows me to try to delete it untill my tomcat stop (with kill the application that was using the file). And this don't hapen every time that i try to delete one file.
And worse, once it hapen every next time that i try to delete one file hapen the same bug.
My question is...what could it be, and what can i do to solve this?!About this is not a possible cause. Because before i upload a file I verify if the file already exists and even after i change the file name:
//this method change the file name and eliminate all the special characters, and also attach the current day of month,
//month, year, minute and second to the file name
public String generateFileName(String fileName){
Locale l = new Locale("pt","BR");
Calendar cal = Calendar.getInstance(TimeZone.getTimeZone(TimeZone.getTimeZone("GMT-3").getID()), l);
int ext = fileName.lastIndexOf('.');
String name = fileName.replace(fileName.substring(ext), "");
String newName = RemoverAcentos.remover(name).toLowerCase()+cal.get(cal.DAY_OF_MONTH)+cal.get(cal.MONTH)
+cal.get(cal.YEAR)+cal.get(cal.MINUTE)+cal.get(cal.SECOND)+fileName.substring(ext);
return newName;
}the upload method
String fileName = generateFileName(item.getFileName());
try {
File uploadFile = new File(filepath, fileName);
if (!uploadFile.exists()) { -
Bug with Show Whitespace and tab and space characters in SQL comments
If Preferences > Code Editor > Display > Show Whitespace Characters is checked, and I type the following in SQL Worksheet:
--A[tab]B[space]C
It renders with two spaces between B and C. The first one is a blank space without the light dot character used to signify a space character, and the second space is filled with the dot character. The caret is then blinking before the C instead of after it:
--A[tab]B[space][dot][|]C
Further selection actions and editing in the region produce "corrupted" results. I've tried changing fonts, but there was no change to the behavior. Multiple tabs before the B produce multiple blank spaces immediately after it, and when placed at the end of the line the caret is then shown another space to the left of the C:
--A[tab][tab]B[space][space][|][dot]C
If I turn off Show Whitespace Characters the rendering immediately corrects, and caret placement, selection action, and editing behaviors all work as expected.
This is observed on OS X with both the Mac OS X and Oracle/Fusion Blue look and feels.
Ian
About
Oracle SQL Developer 3.0.04
Version 3.0.04
Build MAIN-04.34
Copyright © 2005, 2011 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.31
Product ID: oracle.sqldeveloper
Product Version: 11.1.2.04.34
Version
Component Version
========= =======
Java(TM) Platform 1.6.0_24
Oracle IDE 3.0.04.34
Versioning Support 3.0.04.34
Properties
Name Value
==== =====
apple.awt.graphics.UseOpenGL false
apple.awt.graphics.UseQuartz false
apple.laf.useScreenMenuBar true
awt.nativeDoubleBuffering true
awt.toolkit apple.awt.CToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level CONFIG
class.transfer delegate
com.apple.macos.smallTabs true
com.apple.mrj.application.apple.menu.about.name SQL_Developer
com.apple.mrj.application.growbox.intrudes false
file.encoding MacRoman
file.encoding.pkg sun.io
file.separator /
ftp.nonProxyHosts local|*.local|169.254/16|*.169.254/16
gopherProxySet false
ice.browser.forcegc false
ice.pilots.html4.ignoreNonGenericFonts true
ice.pilots.html4.tileOptThreshold 0
ide.AssertTracingDisabled true
ide.bootstrap.start 1309201485440911000
ide.build MAIN-04.34
ide.conf /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
ide.config_pathname /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
ide.debugbuild false
ide.devbuild false
ide.extension.search.path sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun true
ide.java.minversion 1.6.0_04
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir /Users/ibrandt/.sqldeveloper
ide.product oracle.sqldeveloper
ide.splash.screen splash.gif
ide.startingcwd "/Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin"
ide.user.dir /Users/ibrandt/.sqldeveloper
ide.user.dir.var IDE_USER_DIR
ide.vcs.noapplications true
ide.work.dir /Users/ibrandt/sqldeveloper
ilog.propagatesPropertyEditors false
java.awt.graphicsenv apple.awt.CGraphicsEnvironment
java.awt.printerjob apple.awt.CPrinterJob
java.class.path ../../ide/lib/ide-boot.jar
java.class.version 50.0
java.endorsed.dirs /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/endorsed
java.ext.dirs /Library/Java/Extensions:/System/Library/Java/Extensions:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/ext
java.home /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
java.io.tmpdir /var/folders/rq/rqQtue9lEpGAwCKh2hL8MU+++TM/-Tmp-/
java.library.path .:/Library/Java/Extensions:/System/Library/Java/Extensions:/usr/lib/java
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.protocol.handler.pkgs oracle.jdevimpl.handler
java.runtime.name Java(TM) SE Runtime Environment
java.runtime.version 1.6.0_24-b07-334-10M3326
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.6
java.util.logging.config.file logging.conf
java.vendor Apple Inc.
java.vendor.url http://www.apple.com/
java.vendor.url.bug http://bugreport.apple.com/
java.version 1.6.0_24
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Apple Inc.
java.vm.version 19.1-b02-334
jdbc.library /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/jdbc/lib/ojdbc6.jar
line.separator \n
log.file.name /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/extensions/oracle.datamodeler/log/datamodeler.log
mrj.build 10M3326
mrj.version 1060.1.6.0_24-334
oracle.home /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.jdbc.mapDateToTimestamp false
oracle.translated.locales de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/jlib/orai18n.jar
os.arch x86_64
os.name Mac OS X
os.version 10.6.8
path.separator :
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
socksNonProxyHosts local|*.local|169.254/16|*.169.254/16
sqldev.debug false
sun.arch.data.model 64
sun.awt.exception.handler apple.awt.CToolkit$EventQueueExceptionHandler
sun.boot.class.path ../../rdbms/jlib/ojdi.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jsfd.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/classes.jar:
/System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Resources/Java/JavaRuntimeSupport.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/ui.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/laf.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/sunrsasign.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jsse.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/charsets.jar
sun.boot.library.path /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries
sun.cpu.endian little
sun.cpu.isalist
sun.io.unicode.encoding UnicodeLittle
sun.java.launcher SUN_STANDARD
sun.java2d.ddoffscreen false
sun.jnu.encoding MacRoman
sun.management.compiler HotSpot 64-Bit Server Compiler
sun.os.patch.level unknown
svnkit.sax.useDefault true
user.country US
user.dir /Applications/Development/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin
user.home /Users/ibrandt
user.language en
user.name ibrandt
user.timezone America/Los_Angeles
windows.shell.font.languages
Extensions
Name Identifier Version Status
==== ========== ======= ======
Check For Updates oracle.ide.webupdate 11.1.1.4.37.59.31 Loaded
Code Editor oracle.ide.ceditor 11.1.1.4.37.59.31 Loaded
Component Palette oracle.ide.palette1 11.1.1.4.37.59.31 Loaded
Data Miner oracle.dmt.dataminer 11.2.0.1.10.109 Loaded
Database Connection Support oracle.jdeveloper.db.connection 11.1.1.4.37.59.31 Loaded
Database Object Explorers oracle.ide.db.explorer 11.1.1.4.37.59.31 Loaded
Database UI oracle.ide.db 11.1.1.4.37.59.31 Loaded
Diagram Framework oracle.diagram 11.1.1.4.37.59.31 Loaded
Diagram Javadoc Extension oracle.diagram.javadoc 11.1.1.4.37.59.31 Loaded
Diagram Thumbnail oracle.diagram.thumbnail 11.1.1.4.37.59.31 Loaded
Diff/Merge oracle.ide.diffmerge 11.1.1.4.37.59.31 Loaded
Extended IDE Platform oracle.javacore 11.1.1.4.37.59.31 Loaded
External Tools oracle.ide.externaltools 11.1.1.4.37.59.31 Loaded
File Support oracle.ide.files 11.1.1.4.37.59.31 Loaded
Help System oracle.ide.help 11.1.1.4.37.59.31 Loaded
History Support oracle.jdeveloper.history 11.1.1.4.37.59.31 Loaded
Import/Export Support oracle.ide.importexport 11.1.1.4.37.59.31 Loaded
Index Migrator support oracle.ideimpl.indexing-migrator 11.1.1.4.37.59.31 Loaded
JDeveloper Runner oracle.jdeveloper.runner 11.1.1.4.37.59.31 Loaded
JViews Registration Addin oracle.diagram.registration 11.1.1.4.37.59.31 Loaded
Log Window oracle.ide.log 11.1.1.4.37.59.31 Loaded
Mac OS X Adapter oracle.ideimpl.apple 11.1.1.4.37.59.31 Loaded
Navigator oracle.ide.navigator 11.1.1.4.37.59.31 Loaded
Object Gallery oracle.ide.gallery 11.1.1.4.37.59.31 Loaded
Oracle IDE oracle.ide 11.1.1.4.37.59.31 Loaded
Oracle SQL Developer oracle.sqldeveloper 11.1.2.04.34 Loaded
Oracle SQL Developer - 3rd Party Database Browsers oracle.sqldeveloper.thirdparty.browsers 11.1.1.04.34 Loaded
Oracle SQL Developer - DBA Navigator oracle.sqldeveloper.dbanavigator 11.1.1.04.34 Loaded
Oracle SQL Developer - Extras oracle.sqldeveloper.extras 1.1.1.04.34 Loaded
Oracle SQL Developer - File Navigator oracle.sqldeveloper.filenavigator 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Antlr3 Translator oracle.sqldeveloper.migration.translation.core_antlr3 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Application Migration oracle.sqldeveloper.migration.application 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Core oracle.sqldeveloper.migration 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations DB2 oracle.sqldeveloper.migration.db2 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations DB2 Translator oracle.sqldeveloper.migration.translation.db2 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Microsoft Access oracle.sqldeveloper.migration.msaccess 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Microsoft SQL Server oracle.sqldeveloper.migration.sqlserver 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations MySQL oracle.sqldeveloper.migration.mysql 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Sybase Adaptive Server oracle.sqldeveloper.migration.sybase 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations T-SQL Translator oracle.sqldeveloper.migration.translation.core 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Teradata oracle.sqldeveloper.migration.teradata 11.1.1.04.34 Loaded
Oracle SQL Developer - Migrations Translation UI oracle.sqldeveloper.migration.translation.gui 11.1.1.04.34 Loaded
Oracle SQL Developer - Object Viewer oracle.sqldeveloper.oviewer 11.1.1.04.34 Loaded
Oracle SQL Developer - Real Time SQL Monitoring oracle.sqldeveloper.sqlmonitor 11.1.1.04.34 Loaded
Oracle SQL Developer - Reports oracle.sqldeveloper.report 11.1.1.04.34 Loaded
Oracle SQL Developer - Scheduler oracle.sqldeveloper.scheduler 11.1.1.04.34 Loaded
Oracle SQL Developer - Schema Browser oracle.sqldeveloper.schemabrowser 11.1.1.04.34 Loaded
Oracle SQL Developer - SearchBar oracle.sqldeveloper.searchbar 11.1.1.04.34 Loaded
Oracle SQL Developer - Snippet oracle.sqldeveloper.snippet 11.1.1.04.34 Loaded
Oracle SQL Developer - Spatial oracle.sqldeveloper.spatial 11.1.1.04.34 Loaded
Oracle SQL Developer - TimesTen oracle.sqldeveloper.timesten 2.0.0.04.34 Loaded
Oracle SQL Developer - Tuning oracle.sqldeveloper.tuning 11.1.1.04.34 Loaded
Oracle SQL Developer - Unit Test oracle.sqldeveloper.unit_test 11.1.1.04.34 Loaded
Oracle SQL Developer - User Extensions Support oracle.sqldeveloper.userextensions 11.1.1.04.34 Loaded
Oracle SQL Developer - Worksheet v2 oracle.sqldeveloper.worksheet 11.1.1.04.34 Loaded
Oracle SQL Developer - XML Schema oracle.sqldeveloper.xmlschema 11.1.1.04.34 Loaded
Oracle SQL Developer Data Modeler oracle.datamodeler 3.0.0.665.2 Loaded
Oracle SQL Developer Data Modeler - Reports oracle.sqldeveloper.datamodeler_reports 11.1.1.04.34 Loaded
PROBE Debugger oracle.jdeveloper.db.debug.probe 11.1.1.4.37.59.31 Loaded
Peek oracle.ide.peek 11.1.1.4.37.59.31 Loaded
Persistent Storage oracle.ide.persistence 11.1.1.4.37.59.31 Loaded
Property Inspector oracle.ide.inspector 11.1.1.4.37.59.31 Loaded
QuickDiff oracle.ide.quickdiff 11.1.1.4.37.59.31 Loaded
Replace With oracle.ide.replace 11.1.1.4.37.59.31 Loaded
Runner oracle.ide.runner 11.1.1.4.37.59.31 Loaded
VHV oracle.ide.vhv 11.1.1.4.37.59.31 Loaded
Versioning Support oracle.jdeveloper.vcs 11.1.1.4.37.59.31 Loaded
Versioning Support for Subversion oracle.jdeveloper.subversion 11.1.1.4.37.59.31 Loaded
Virtual File System oracle.ide.vfs 11.1.1.4.37.59.31 Loaded
Web Browser and Proxy oracle.ide.webbrowser 11.1.1.4.37.59.31 Loaded
XML Editing Framework IDE Extension oracle.ide.xmlef 11.1.1.4.37.59.31 Loaded
audit oracle.ide.audit 11.1.1.4.37.59.31 Loaded
classpath: protocol handler extension oracle.jdeveloper.classpath 11.1.1.0.0 Loaded
jdukshare oracle.bm.jdukshare 11.1.1.4.37.59.31 Loaded
mof-xmi oracle.mof.xmi 11.1.1.4.37.59.31 Loaded
oracle.ide.dependency oracle.ide.dependency 11.1.1.4.37.59.31 Loaded
oracle.ide.indexing oracle.ide.indexing 11.1.1.4.37.59.31 Loaded
palette2 oracle.ide.palette2 11.1.1.4.37.59.31 Loaded
status oracle.ide.status 11.1.1.4.37.59.31 Loadedare you using an "Expert Mode" query or not?
With normal mode, the query is stored in an XML attribute.
With expert mode, it's stored in a CDATA Section, which allows it to respect all user-spacing and newlines.
XML attribute values are forced by the XML 1.0 spec to be normalized, and this is done by the parser when they are read in. That might account for your different in space treatment. -
Possible strange bug with parallel loops in LV2010
I have a specific code which does not execute correctly in parallel, but making almost any small change to the code causes it to work. Even more bizarre, I can change it so that it sometimes works correctly, and somtimes doesn't. Interested? Read on...
I have a relatively simple VI (to compute 2D Wavelet Denoising on planes of a 3D array) with the following block diagram (debugging not allowed):
The parallel loop is set to 8 automatically-partitioned instances, and I've tested this on 2-core and 8-core machines. When the #cores wired into the loop is not one, several of the iterations do not compute (for example 4 out of 24). I can check this by putting a break in the VI called inside the loop and counting how many times it is called.
I can do a number of things to make all iterations run:
- put an indicator inside the loop on the iteration number, or anything else (except the P node)
- wire the iteration number outside the loop to an indicator
- remove the case structure
- remove the loop in the other case (it's at the moment identical except for a call to a different VI which uses Discrete WT instead of Undecimated WT -- if I change the other case to match this one, the other case runs fine but this one still fails)
- change code outside the loop
- turn on debugging!
- change the loop setup to another number of instances other than 8
- change the loop setup to set the number of partitions
I can also do a number of things that do not solve the problem:
- rewriting the loop from scratch
- copying the loop from the other case
- saving for LV2009 (in which everything runs as expected) and then reloading (and presumably recompiling) in 2010
Stranger still, if I replace the called VI with a dummy VI (which simply adds one to the input 2D array so I can tell if it executes), then as long as the other wires are still wired in, it sometimes executes all iterations, and sometimes doesn't (roughly 50% split)!!! Any other changes and it always works fine.
I've managed to replace as much as possible with dummy code and still keep the results the same (i.e. sometimes executing all iterations and sometimes not).
If you want to check it out (on a multicore machine with LV2010), run LoopTest.vi, and the results at the index shown should sometimes be 13 and sometimes 14. Changing #cores to 1 will always give a result of 14, changing WT to DWT always gives 14, even though the code inside both cases is identical!
Hope it's not just me, otherwise I'll be sure that LV hates me!
Attachments:
LoopTest.zip 355 KBOK, here's a new version that exhibits the same behaviour, but is hopefully simpler to understand.
The expected result is to add one to the whole array, however sometimes not all of the parallel iterations are executed. Run ParallelLoopTest.vi from the attached ZIP file on a multi-core machine to verify. This screenshot shows that sometimes it works correctly, and sometimes not:
The code in the other case is identical (created by duplicating the case) but always works correctly.
Attachments:
ParallelLoopTest.zip 63 KB -
Has anyone seen this BUG with Time Warp and Dissolve?
I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
This is true scrubbing through the timeline and even rendering.
VERY ANNOYING!
I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.Steve,
I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
Here is the link to the Adobe bug report form
. It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
The important thing to glean from SG's post is the definite need to file a bug report. -
Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.
Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
IoneThakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere -
Imovie '09 v8.0.5 bugs with speed change and titles
OK so here is what I'm experiencing.
I take a clip and change the speed. Then I add transition from the previous clip to this one and all of a sudden I cannot play the video again. I can't delete the slowed down clip even. I can play video that is in the events library, but not that in my project. When I do mouse over the beginning of my video and play I can hear the sound but it is like it is far off in the distance and the video is just solid gray. I have run into many other similar bugs when changing the speed of a clip but could always delete the clip, quit, relaunch, and try again. With this problem I added a transition and can't even delete the clip. Apple please address this issue. Thanks!I am having the exact same issue. Change the speed of a clip in the project, then the ongoing video screen no longer displays the project correctly (but does display when playing clips from the library). This happened recently as I've made several older projects on iMovie 09 using multiple speeds. Perhaps a bug with the 8.0.5 update.
-
Possible bug with Pick flag and Collections
Odd behaviours in v3.3 (Windows) with pick flags in Collections:
Create (or use) a Collection Set which contains a number of different collections
Assign Pick plag to one photo in each collection
Bug 1: Highlight Collection Set and note that none of the images shows the Pick Flag in the thumbnail view. Also Filtering this view with Pick flag fails to pick up the Flagged images
Now return to one of the Collections within the Set and create a Virtual Copy of one of the images that has a Pick flag. (Note virtual copy does not have a flag - which seems logical). Return to Collection Set and (Bug 2) note that Pick flag has disappeared from original image and now appears on Virtual copy.
Something wrong here somewhere I suspect.lightshop wrote:
Odd behaviours in v3.3 (Windows) with pick flags in Collections:
Create (or use) a Collection Set which contains a number of different collections
Assign Pick plag to one photo in each collection
Bug 1: Highlight Collection Set and note that none of the images shows the Pick Flag in the thumbnail view. Also Filtering this view with Pick flag fails to pick up the Flagged images
Now return to one of the Collections within the Set and create a Virtual Copy of one of the images that has a Pick flag. (Note virtual copy does not have a flag - which seems logical). Return to Collection Set and (Bug 2) note that Pick flag has disappeared from original image and now appears on Virtual copy.
Something wrong here somewhere I suspect.
I could partially repeat bug 2.
I have Collection Set (Test) which contain to collections: "Collection 1" and "Collection 2". Both Collections contain 4 images.
I selected "Collection 1" and applied Pick flag to all those images. When I select Test (Collection Set) I got 8 images shown, which none had flags. Ok, this works as expected. I selected "Collection 1" and then selected 1 image and made Virtual copy from it. Lr show me now 4 images with Flag and 1 virtual copy without. Again, works as expected. I now select Test (Collection Set) and I get 9 images (as expected), but one of them, the virtual copy, has pick flag applied. Not as expected. If I go back to "Collection 1" I get four images with Pick flags and one virtual copy without. (as expected.) -
Strange Issue with Guided Nav and filters
Hi All,
I am have a very strange issue with the guided navigation.
I created an answer in BI and when I look at 'Display Results' in Answers everything shows up fine.
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= current_date-1) AND (LU_ACCOUNT.TERMMATDATE <= current_date+89)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
But when I link to this answer via guided navigation the filter seems to change??
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (LU_PRODUCT.MAJOR = 'CML') AND (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1) AND (LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Dashboard=/users/administrator/_portal
Dashboard Page=Loans Maturing
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
I am just it is going to the same report. Any ideas on why this is happening??
ThanksYes,
these are simply two different reports, as you can see from the filters... -
Very strange bug with my Apple Wired Keyboard
I have a very strange issue with my Apple Keyboard.
Sometimes my Apple Keyboard stopped working at my MacBook Pro Retina 15 inch late 2013. I doesn't give any input at all in all the usb ports. The strange thing is when I connect the Apple Keyboard extension cable it worked again and I can disconnect the extension cable and plug it back in with only the cable from the keyboard itself and it works as well. This happened every 2 to 3 months to me. It only happens when my MacBook is in sleep mode and I wake it up.
Can somebody please help me. What when I lose the Apple Extension cable?Yes, a USB extension cable with a male and female end will work.
example: Amazon.com: Belkin USB Extension Cable (10-Feet): Electronics -
Issues with color panel and other windows on right side of flash
Ok the issue I'm having with flash is that the windows on the right side of my flash window do not snap up when I collapse a window. I am attaching a screen shot to better explain this issue.
As you can see I have the color panel collapsed up, when I expand this panel and it goes down everything shifts down. however when I collapse it back up a huge gap is left behind in CS5.5 as is displayed in screen shot number 2. In CS4 I never had this problem. I could expand and collapse panels as I saw fit with no problems what so ever. Everytime now that I expand a panel and collapse it, the library or other panels do not move up with the collapsing. This causes a workspace issue. and forces me to drag up the library via the black line that is just above it but below the align panel so that I have better access to my library or properties panel for when I'm working. I find this highly annoying and would like it if there could be a fix produced to make it so this collapsing issue can be fixed and I don't have to waste time dragging up the library/properties panel everytime I need to access stuff in my library when I have a huge list of graphics I'm going through.
Thanks
h_cline2I already tried that, first thing I thought of before coming to the forums for a solution.
Thanks anyways.
Any other ideas?
Maybe you are looking for
-
Hi, there is some basic missing concept from B2B developer guide, we can learn all, but DB table part is missing, i did nt found any material for that. can any one please tell me about basic DB architecture of B2B, what all table involve in it. I nee
-
IOS 6 firmware beta 1/beta 2/beta 3
Will ipod touch 4g support siri in beta1 or beta2 or beta3 ????
-
I try ot get on to the internet, but I get a "cannot open page" error - any thoughts?
OK- not really a tech savvy person so....I have checked the router base, the cables.... not sure how to update my firmware.... and I have tried resetting and signing back on, not really sure what else I can do - any help would be greatly appreciate
-
I gave here sample query and o/p. WITH numbered_table2 AS (SELECT id, city, row_number() OVER (PARTITION BY id ORDER BY ID) AS R_NUM FROM table2 numbered_table3 AS (SELECT id, dept, row_number() OVER (PARTITION BY id ORDER BY
-
On the new time capsule a/c, does the time capsule have to remain up-right? Can the time capsule lay on it's side and still function? Thanks