Strange problem with my Mac

Hi all, I have a strange problem with my Mac. Almost all windows I open have a "focus" on their controls (buttons, checkboxes and so on) even if they are not selected or even possibly will be. How can it be fixed?

Hello JIGSAW726,
This is the 'Full Keyboard Access' setting that allows you to manipulate various dialogs and controls without a mouse. This settings can be enabled/disabled in System Preferences -> Keyboard -> Keyboard Shortcuts, or with the keyboard shortcut: control + f7.
OS X Mountain Lion: Full keyboard access
http://support.apple.com/kb/PH10711
Cheers,
Allen

Similar Messages

Strange Problems with Power Mac G5 - Shutdown, Date/Time, Mobile Me

Hello All,
Need some help resolving recent issues with my Dual 1.8 GHz g5 (PPC).
I recently had my internal boot drive start falling, so I had it cloned onto a brand new drive. Did not reinstal system (do not have access to m original installers). Since then have been experiencing the following issues:
On starup, the auto update of date/time does not work. An error message pops up stating date is set to before 2001. If it doesn't fix itself in the first 30 seconds (sometimes it does) I go to sys prefs/date & time and wait a few seconds and it then updates correctly.
When I shutdown the computer doesn't make it all the way. It successfully shuts down the OS... screen goes blue to black as normal... but the actual machine stays on unless I keep the power button pressed to force it to shut down. If I don't the computer stays on (black screen... but the hardware still on, as if it were asleep) and then the fans go into overdrive within about five minutes.
Startup is long and goes right into aforementioned date/time issue.
Lastly, I noticed mobile me is not updating my iCal between this mac and my new MacBook pro. It used to work until all this started happening.
Otherwise the computer runs fine, no strange behavior in any applications, OS, etc.
Have not replaced internal G5 battey, so I will explore that. Any other ideas what might be going on?
Thanks in advance,
F

Probably the battery. The time being reset is a typical sign. Replace it before any more troubleshooting.
Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies to most Macs. The SMU link is for a late G5 Tower. Early G5's use PMU reset, as shown in the tutorial. The battery for late G5 + G5 iMacs and earlier iMacs, Mac Minis and Intel Tower Macs is this one.
The clone could be an issue too, if it was made from a drive that was already having issues. Do the battery and we'll see what happens!
DALE
Message was edited by: Dale

A strange problem with yosemite

hello everybody,
i have a strange problem with my mac os.
i can’t seperate my disk to 3 or more partition. 
when i click to partition area, the partition layout and plus button are not enable/available. (example screen is as below) only it's possible when i erase all disk and os software in recovery mode (cmd+r) and after this it have to reinstall but i don't want this.  what causes it, can anyone help me please for this stuation? i have to use at least 3 partition.
(i’m using yosemite 10.10.3, it's also not working/enable when i erase windows, and all partition if i do it on yosemite, i also tried it over and over only it's working when i erase all disc and os x in recovery mode) 
i'm looking forward your help. 

what about that screens ?

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

10.4.10 update and very strange problem with Mac Mini

Dear All,
I have just updated my Mac Mini Intel and I am having a strange problem.
My Mac Mini has problems booting up. Sometimes I get through the login screen as normal but my wallpaper shows and there are no desktop icons, no dock, no top of screen finder menu bar. Some other times I get stuck in the progress bar of the booting up.
I tried to run utilities from install disk and there were no problems detected.
The VERY STRANGE thing is that several times now as I put my fingertip onto the power button laying it on the button but not pressing it yet (because I would like to shut down the system), the system kicks in and becomes unfrozen!!!
Someone in the 123macmini.com forum says that this problem is related to the airport receiver which is near the power button.
What do you think about it???
MacBook and MacMini Mac OS X (10.4.10)

ok, I have found a kind of fix for the problem, although may run a hardware test to check something!.
I unplugged all USB and Firewire devices, I turned off Bluetooth and Airport, reinstalled the 10.4.10 combo update, when it restarted the starting mac osx screen took barely a second or 2 to load (my comment above is becuase from when I first got it on Sunday I noticed it was slow to boot up, also noticed that the screen resoulution I have set does not kick in until I log on, although this may be becuase this mac mini is an intel one). The computer booted up very quickly and I tuend on bluetooth and airport with no issues and plugged all the usb and fireware devices back in. I again turned the airport off and restarted and again it booted up very quickly logged on and swithced the airport back on. I decided to reboot with the sirport on and it got stuck at the end of the os x starting up screen, I waited a few mins switched it off and on again and it booted up fine although slower. I dont mind turning the airport off when I power down as the mac usually stays on anyway. I assume Apple will release a fix for this as a lot of people seem to have the problem so think I will stay put with this for the time being. It was taking a several goes to get to the login screen before but usually got there every few boots.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange Problem with ARD 2.2 *Please Help*

Strange Problem with ARD 2.2 (2 problems)
We have a classroom lab with 14 G5 PPC's running 10.4.11 with ARD 2.2 clients installed.
We controlled all the G5's from a PPC Mac Mini running 10.4.11 with ARD 2.2, this was our Admin machine in our server room.
We then added a teachers machine in the lab, an iMac PPC running 10.4.11 and ARD 2.2 also with admin status.
Everything was working fine!
We then upgraded the iMac PPC to an iMac Intel with 10.4.11. We installed ARD 2.2 admin and did the intel intergration.
Everything worked fine.
The iMac PPC was moved to another location, ARD was removed following instructions on the Apple website telling us to delete the application then run some terminal commands to remove pref's.
Then our Intel iMac screen broke, we had the "lines" problem so bad only half the screen was visible. Long story short Apple wanted to charge us almost half the cost of the machine (no Applecare as it was a donated machine) to repair the screen!
So we moved the PPC iMac back into the lab, re-install ARD 2.2.
Now here is the problem, I can control, observe and run almost any command but cannot share with any computer!
2nd,the Mac Mini Tech computer is running fine but cannot control or observe the PPC iMac teacher machine (we were able to do this before) I can even share the Mac Mini with the iMac but cannot observe or control!!
Any ideas?

"With ARD you have to enable option to control a Mac which has ARD running on it as opposed to remotely controlling normal client Mac."
I'm not sure I understand, do you mean in System Pref's under sharing? Or is there somewhere else I need to enable to control?
Seems like a hassle to reinstall the entire OS just to fix this problem, I am able to do everything else, except observe from one admin to another, and control from 1 admin to clients.
thanks

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Strange problem with jpcap library.

Hello everone;)
I have a very strange problem with jpcap. I have ubuntu 8.10, libpcap installed by apt (manually upgraded to 0,9,8) and jpcap 0.7 (installed from deb package).
My code is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package agh;
import java.util.logging.Level;
import java.util.logging.Logger;
import jpcap.*;
import jpcap.packet.Packet;
* @author iceman
public class Main
 * @param args the command line arguments
 public static void main(String[] args)
 try
 Tcpdump interfejsy = new Tcpdump();
 catch (Exception ex)
 Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
// agh_MainFrame ramka = new agh_MainFrame();
// ramka.setVisible(true);
 // TODO code application logic here
class Tcpdump implements PacketReceiver
 public void receivePacket(Packet packet)
 System.out.println(packet);
 public Tcpdump() throws Exception
 System.out.println("wszedlem do wykazu interfejsow");
 NetworkInterface[] devices = JpcapCaptor.getDeviceList();
 if (devices.length ==0)
 System.out.println("no devices");
 for (int i = 0; i < devices.length; i++)
 System.out.println(i + " :" + devices.name + "(" + devices[i].description + ")");
System.out.println(" data link:" + devices[i].datalink_name + "(" + devices[i].datalink_description + ")");
System.out.print(" MAC address:");
for (byte b : devices[i].mac_address)
System.out.print(Integer.toHexString(b & 0xff) + ":");
System.out.println();
for (NetworkInterfaceAddress a : devices[i].addresses)
System.out.println(" address:" + a.address + " " + a.subnet + " " + a.broadcast);
When i start this simple code it isn't working correctly. On the output i have only "no devices". JpcapCaptor doesn't see any mine network interfaces. On windows this code works correctly.
Anyone has any idea what is wrong?
Thanks,
iiceberg

Hi, guys,
I also have a similar problem but in Windows. I've been using a W2008 Server for a short time. For what I've seen and have been told, it works like a Vista. I've wrote a program which uses jpcap and winpcap and, first of all, gets the device list.
Well, if I boot my computer and log on with my usual account, which in theory is an administrator, gets 0 devices when I run the program.
Then, if I log on with the actual Administrator account i works perfectly.
And, if after logging and running the program with the Administrator account (NOT just logging on) I log on with my usual account, it works too.
It's like the Adm account has some kind of "top" permission that doesn't go away at logoff. I tried that because I had some other problems accessing the DVD-ROM for writing from my usual account.
I think that I doesn't happen in WXP, but I haven't tested that last problem, yet.
Any ideas??
Thank you.

Help! Problem with my Mac Pro! :(

Im having a strange issue with my Mac Pro it freezes and gets stuck during startup and the OSX never starts, the spining gear gets stuck. First i thought it was the memory so i used the apple hardware test. Then i tryed the hard drive in another computer and it worked. The thing is that is not working in my machine
I have a Mac Pro (Early 2008) computer with 8 gb of Ram and a Nvidia Geforce 8800 GT
KERNEL PANIC sign twice and i couldnt do anything. The message i got is this one.
As far i could understand it has something to do with the NVIDIA driver right?
Does anybody know how to solve this problem since I dont know what to do...
Thanks a lot!
Diego
Wed Oct 19 09:18:44 2011
panic(cpu 0 caller 0x001A8C8A): Kernel trap at 0x685cb15b, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x000000bc, CR3: 0x00e7f000, CR4: 0x00000660
EAX: 0x56279630, EBX: 0x07c18004, ECX: 0x07daa800, EDX: 0x00000000
CR2: 0x000000bc, EBP: 0x56279668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x685cb15b, CS: 0x00000008, DS: 0x07da0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x56279408 : 0x12b0f7 (0x458124 0x5627943c 0x133230 0x0)
0x56279458 : 0x1a8c8a (0x461650 0x685cb15b 0xe 0x460e00)
0x56279538 : 0x19ece5 (0x56279550 0x9 0x56279668 0x685cb15b)
0x56279548 : 0x685cb15b (0xe 0x48 0x56270010 0x68600010)
0x56279668 : 0x685d2f44 (0xc1d00001 0x2000000 0x2000003 0x40)
0x562796c8 : 0x685c7ecf (0x56279858 0x6 0x0 0x0)
0x56279828 : 0x685bb012 (0x0 0x600d600d 0x7027 0x56279858)
0x562798e8 : 0x6878e54b (0xc1d00001 0x2000000 0x2000003 0x40)
0x56279918 : 0x6879798f (0x479bf000 0x2000000 0x88100090 0x3e)
0x5627b8a8 : 0x6877bc6e (0x479bf000 0x2000000 0x15 0x479bf01c)
0x5627b9a8 : 0x685b5572 (0x479bf000 0x0 0x5627bab2 0x80)
0x5627ba08 : 0x564275a5 (0x7d8e400 0x0 0x5627bab2 0x80)
0x5627bb38 : 0x56428d74 (0x7d8e400 0x5642c358 0x5627bbec 0x4)
0x5627bc08 : 0x56463133 (0x7d8e400 0x1 0x0 0x13)
0x5627bc68 : 0x5645c93a (0x7d8e400 0x5 0x5 0x83b64e0)
0x5627bc98 : 0x40ebc5 (0x7d8e400 0x83b64e0 0x83b64e0 0x0)
          Backtrace continues...
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.NVDAResman(5.2.6)@0x685b4000->0x687f3fff
            dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x56421000
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
            dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000
         com.apple.iokit.IONDRVSupport(1.5.2)@0x56421000->0x5642efff
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
            dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000
         com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000->0x5646ffff
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9C2031
Kernel version:
Darwin Kernel Version 9.2.1: Tue Feb 5 23:08:45 PST 2008; root:xnu-1228.4.20~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)

Are you booting from the DVD as follows:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
What happens when you try this? Do you still get the kernel panic? If so, then there is a hardware failure. It could be the video card but it could also be caused by a defective memory module. You might try running the hardware test:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
If this fails as well, then you will need to take it in for repair.

Strange problems with afp since 10.7.3

Hi every one,
I have a strange problem with afp shared volumes:
-Between two lion systems: no problems
-Between one macbook air under lion and one mac mini with SL: the mac mini succeed in mounting the shared volumes of the mba but the reverse is not true. Notice that it failed with the finder (CMD+K, afp://....) but I succeed with afp_mount command in terminal. I see no log that can help. Note also that the problem arise with 10.7.3: apple has misfixing something?
I already done the following: http://support.apple.com/kb/HT4700
Do you have any ideas?
Thanks for all,

IMHO Apple has messed all types of sharing on Lion. Between Mac to Mac networks and to Windows networks.
Try unchecking File Sharing and then Re-checking it. I have to do this everytime I boot or reboot my MBP running Lion 10.7.2 and .3.

Strange problems with memory dimms(Banks) in imac 27in mid2010

Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
Before dismantling my memory was 16gb ( 4x4 dimms)
After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
and it was not from dimms because i swapped them..!!!
So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
Sorry for long post.

Okay great news... My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which the computer wouldn't even recognize.
So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram. I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram. 10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
Some venting that Apple hopefully will read and mention to their resellers....
The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website. The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong. On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500. THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms. Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice.

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with my Mac

Similar Messages

Maybe you are looking for