Structure changed for plan cube

Hi,
If I created a basic cube and load data for some time, then I added new characteristic or key figures,
I have to delete the content of the cube and re-load data.
What's about the plan cube? The data in plan cube is loaded by input ready query, they cannot be relaoded as basic cube. If i need to add new characteristic or key figures, how should I do?
Many Thanks
Jonathan

You can use the concept of remodeling to add new chara / KF in your plan cube. This doesn't need any data deletion or reload.
These are the links for information & examples on remodeling:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00ddebe-cc48-2b10-758a-8008e63d6826
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/008f9fef-22e4-2a10-d994-a17c55ca06f0
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/remodeling
Regards,
Deepti

Similar Messages

MM - Pricing Conditions - Mass Change for Planned delivery costs

Dear gurus,
Is there way to mass change the value of pricing conditions of Planned Delivery costs in the PO? Also the supplier?
Any suggestion?
Many Thanks for helping,
Maria

Hi,
As far as I know, this can be done for condition type/vendor price maintained in info. record.
Transaction code: MEKP
Enter the condition type, enter the '+' sign if value is to be raised.
If you tick the 'Test Run' you can also simulate the condition (old v/s New).
Hope this helps!!
Reetesh

Defragmenting Planning Cube with Refresh

Has any body ever worked across a script which will defragment the planning app cubes(3 cubes in an app say).
Essbase cubes its easy I know. clearing lev0 data/reset cube/load data ang aggregate.
For planning cubes the process need to be 100% automatic. Also it requires automatic refresh of Planning app before the aggregation step, to bring currency rates to essbase.
If essbase and planning servers are different how to accomplish this a fully automatic script without any manual intervention.
Any suggestion will be appreciated.
Thanks,
Tarini

Try the following utility to refresh your cube:
[http://www.network54.com/Forum/58296/message/1201822528/Re-+CubeRefresh-exe]
Use a batch file or shell script to launch the utility above, then use MaxL (launched from the same batch file) to export the data from the Essbase cubes, clear and reload to defrag. I would install the Essbase client on your Planning Server (so you can run MaxL from your Planning server). Schedule with whatever scheduling tool you prefer.
- Jake

RECORDING CHANGES IN PLANNED ORDER

HOW TO KEEP HISTORY OF CHANGES PLANNED ORDER.

Hi,
As per my knowledge, It is not possible to track history of changes for planned orders.
You can track changes of Production /Process orders in OCM & Master data like BOM,Routing changes in ECM.
Regards,
Tejas

Property for Planning is not alowed to change in a query

Hi all,
I need your help, I am new on IP, but I was working on BPS. I am trying to create a query by Business Explorer but the query does not allow to Set the property for Planning "Start query in Change Mode"- this option appears grey.
The same ocurrs with the 'Key Figure' Planning Property to set "Can be changed Manually or via Planning Functions" for the appropriate KeyFigures.
I have a real time cube, I have 3 agregation level ( I created it by IP wizard).
What do I need to create a query to allow to Set the property for Planning?
Thank you very much.
Victoria

Hi,
cf. the documentation
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
i.e. you have to define the query on an aggregation level or a MultiProvider that contains at least one aggregation level as a partprovider.
Regards,
Gregor

BPS Processing Question for 2 Planning Cubes

Hello, Can you please give input on the following scenario:
We have 2 planning cubes, cube 1 contains selection
criteria records which will be used to select and
process the detail records from planning cube 2. i.e.
Sales Org = 100, Material= 200, Pct=.05
This cube could have multiple records with different
selection criteria.
Cube 2 holds the detail data to be selected and
manipulated based on the records from cube 1. We want
to process each record from cube 1, one record at a
time as selection criteria to select and process the
data from of records of 2nd cube. i.e. Select Sales
Org = 100, Material=200, Cost = Cost * .05 etc.
Do you have a best practice or ideas?
I really appreciate any help. Scott

I think you should include these 2 cubes in a multiplanning area and implement a FOX function for this scenario. The same combinations of sales org, material... etc will get grouped into one data packet and get processed together (these criterion chars should not be marked <i>'to be changed'</i>).
Hope this helps.

Changing MRP controller for planned order

Hello experts,
Is there any way the planner could change the MRP controller of a planned order within MD12 ? We are using ver 4.7 and this field is not enabled. Currently the planners are creating prod orders much in advance and are looking to move to a process where they firm planned order. We are using project stock planning structure so more that one planner may create orders for the same material. So when one planner review the material planning for one project he would firm the planned order and assign it to him for leater conversion.
Note: I the config I didn't saw any field selection control for planned orders.
Thank you in advance for sharing your wisdom.
Francois Paquet BPA
aeronautive industrie

Francois,
Very interesting question. However I never had to change those fields in either planned or prodcution orders.
Both orders master data fileds are disabled.
However since your are working with project orders ( or netwrok orders ) system would be giving you specific planner order hard tied to the project order ( similar to Made to order scenario).
Planner could use MD51 ( project planning ) & MD4C ( option for Netwrok or WBS element ) for monitoring progress of his /her order.
This way planners do not have to go by MRP controller data.
Hope this provides some new thoughts.
Thanks,
Ram

User exit/ badi needed for planned order create/change,collective ATP check

Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

Dear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar

How to give planners read only access to Planning cube for ad-hoc analysis?

Hi Everyone,
I am trying to issue smartview reports to the planners. Most of the reports are coming off Essbase (reporting) application. However, we have to generate one report from planning server because of the text fields. Currently, on planning server, planners have access only to the forms. They dont have access to the planning cube. But to make them able to refresh this report, we need to give them access to the planning cube.
But we dont want them to do ad-hoc data write on planning cube. So my question goes like this - Is there a way for planners to have write access on the web forms but only read access to the cube through samrtview ??

The access permissions will match between planning and smart view if a planning connection is used.
Cheers
John
http://john-goodwin.blogspot.com/

CO88-Error :Perform the planned price change for material

Hi Experts,
While running CO88 i get this error. "Perform the planned price change for material ". My material is manage at S and it doesn't have any marked cost. The status is FR and no other status on cost etimate for the article are active. what i shoul do? why if i run the PP order with KO88 i don't have any error?
Please help i'm facing the closing period.

Hi,
If dynamic price change is active in your system the first posting in the new period of this material tries to
- release a future cost estimate of that period OR
- change the price to the future price in accounting view
(if the future price date is reached)
Unfortunately this dynamic price change does not work in order settlement. Therefore you are asked to perform the price change first by t-code CKME (or CK24).
If you are using price determination control 3, any price change or release should always be the first transaction in a new period to avoid any inconsistencies.
The dynamic price release will only release the price with transactions which involve material movement and this is not the case by posting invoices and order settlements.
if you are in period 12/2009 then a settlement in 12/2009 does not require the release cost estimate of 01/2010.
But if you are already in 01/2010 therefore settlement in 12/2009 is a posting into the previous period. This will change also data of the current period. Therefore the cost estimate has to be released first.
Another option, if you don't want to receive this message, would be to change this message from Error to Warning (check note 434752).
Please follow the following steps:
T-CD:OMRM
Message M8 394
=>you set the message type to '-' for error message M8394, that means no message is to be issued.
regards
Waman

Accommodate structure changes in Budget Application for each year

every year our cost center structure changes to accomplish that we are creating New Budget Application every year . Cost center structure is divided in to Area then region and then csc. These Regions never stays under same Area they change it every year
can anyone suggest out a way to do it in only one Budget Application instead of creating new Application every year ?
How can we Accommodate structure changes in Budget Application for each year?
thanks in advance for the suggestions

Assuming the cost centers stay the same, and only the hierarchy of the dimension changes, it's really quite simple.
Export the level 0 data, clear the database, update outline, import the level 0 export file, agg database. You should now have the new totals.
All of this can be done in place without the export/import of data as well, but it is a good practice to export/clear db/import the data for defrag purposes.
Some things to consider, if the organization will want to compare year over year company totals...
1. They need to create some governance around newly inactive cost centers, usually you create some sort of "Inactive" parent in the dimension and when they are no longer active they need to be reassigned to this "inactive" parent. This will ensure that at least the company total stays the same.
2. Following #1, they need to understand that the year over year totals will may only be accurate at Company total (including the Inactive rollup) and at cost center.
Robert

Read Only/ Plan Mode Changes for a layout with two different queries

Hi,
I have a situvation where a layout opens in a read only mode and when
the users click on button plan, it changes to plan mode. The catch here however is the queries
for read mode and plan mode are slightly different, in the read only mode the query has subtotals
and other calculations that are not a part of the plan mode ( where they input forecasts).
I know if the read and plan query are the same, we can achieve this through the command
SET_DATA_ENTRY_MODE. In case they are different, as above, how can i achieve this.
Thanks
Rashmi.

Say you are using two different queries as DP1 & DP2 for Display and Plan mode respectively. You also have one Analysis grid item in Web template which initially points to DP1.
On PLAN button call command SET_ITEM_PARAMETER to set the data provider of analysis item to DP2.
OR
You have only one dataprovider in your web template as DP1 initially pointing to Query 1 which you want to show in Display mode. Then on PLAN button call a command SET_DATA_PROVIDER_PARAMETERS to point the DP1 to 2nd query instead of 1st query. You can find this command under Commands for data Provider --> Basic data provider commands.
Edited by: Deepti Maru on Nov 27, 2009 9:52 PM

Explain plan changing for the same sql

Hi All,
In a E Business suite application, we have the 10.2.0.4 Database.
One of the program is running a select stmt which is using different explain plan one in a month which is causing issue in the program running for longer time.
Ex : When it uses the index A, it is running fine. When it uses the index B, it is running for longer time.
Can you please advice on the possible reasons for the same sql to choose index B instead of index A some times.
Thanks,
Rakesh

It could be that the SQL is question got aged out of the shared pool and when it came to be reparsed - the values in the bind variables were such that access via index b was more attractive than access via index a.
Could you please send the query and the good and bad plans and all other information that might help diagnose the problem..
Note: we had a similiar case where plans suddenly changed for no apperant reason (on 10.2.0.2) - we found that under certain circumstances the optimizer would not peek into the bind varaibles to derive the execution path.

BAPI for "Change Base Planning Object"

Hi
Is there any BAPI for "Change Base Planning Object" ( TC KKE2).
I need to change the Price of a Resource in the Cost Items for a Base Planning Object.
So if any one know the BAPI for this topic please let me know, and if possible send me your code also it will be really help full.
Regards

I didn't find a BAPI to do this. I had to do it by a Batch Input.

Struggling to correct billing problem and settled. Now waiting for plan to expire so I can change.

I left Sprint because they would randomly charge me for data that I had not used. I thought I had found a cell company that would be a pleasure to work with but this year has proved me wrong.
Last December, I increased my minutes to get a Friends & Family, Text & Talk plan that basically credited each line $20/mo on the data. In January, I had to spend an hour on the phone with customer service because of the way they pro rated my minutes and charged me overage WITHOUT asking if I wanted to back date my plan and informing me of the extra charges that would occur by changing my plan in the middle of a cycle. That was finally settled. In March, when I was visiting a Verizon store to upgrade the phone on one of our lines, our salesperson asked where we worked to see if we could get an additional discount. Turned out that my husband qualified for a discount through his employer so we had to change his name to the primary account holder. That's great except that it took off the $20/mo. discount on one of our lines. Not the main number, but one of our other numbers. I have made several calls to the store and three calls to customer service. Twice they were supposed to call me back and never did. Tonight, someone FINALLY helped me but was only able to put the promotion back on the line effective 6/3. It should have been effective 6 weeks ago but after spending hours trying to straighten this out, I should feel lucky that someone finally got the promotion put back on there. Really??
We had considered using one of our Verizon lines as our home phone with the new device they offer and also using their 4G service as our home internet service. I can't put all of our communications in the hand of a company that doesn't deliver what they advertise and costs me more than I signed up for. I shouldn't have to struggle with customer service everytime I make a change to my service. No one could explain why I had lost my promotion. If that is what happens when you make a change, why didn't my sales rep tell me that. I'm concerned about the lack of information that Verizon employees have. It really doesn't have to be this difficult. Now I will start observing other cell phone companies for when our contracts expire.
Just wanted other potential and current Verizon customers to be aware...because I wasn't.
Jennifer Johnson

I'm not familiar with Verizon wanting people to change their plans online. We just went in to upgrade a phone and they offered to check and see if we were elligible for a discount.
Yes, you would think she could have easily given me the credit for 6 weeks but after sitting on hold for as long as I have with this situation, when she came back and wasn't interested in checking about it, I didn't have the strength left in chasing down her supervisor to get it. Fact is, I should have never spent that much time trying to get them to correct their error. I'm very disappointed that after talking to as many Verizon employees as I did, no one could tell me what happened and how to fix it. I can not be the only person that had that kind of change with that plan.
No one has contacted me yet. I'd be surprised it they did.
Jennifer

Structure changed for plan cube

Similar Messages

Maybe you are looking for