Stsadm import error[FatalError: Failed to read package file.]

[1/27/2012 6:52:38 PM] Start Time: 1/27/2012 6:52:38 PM.
[1/27/2012 6:52:38 PM] Progress: Initializing Import.
[1/27/2012 7:00:03 PM] Error: Failure writing to target file
[1/27/2012 7:00:04 PM] Debug: at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
 at Microsoft.SharePoint.Library.SPRequest.ExtractFilesFromCabinet(String bstrTempDirectory, String bstrCabFileLocation)
 at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
 at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
 at Microsoft.SharePoint.Deployment.ImportDataFileManager.Uncompress(SPRequest request)
[1/27/2012 7:00:04 PM] FatalError: Failed to read package file.
*** Inner exception:
Failure writing to target file
[1/27/2012 7:00:04 PM] Debug: at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
 at Microsoft.SharePoint.Library.SPRequest.ExtractFilesFromCabinet(String bstrTempDirectory, String bstrCabFileLocation)
 at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
 at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
 at Microsoft.SharePoint.Deployment.ImportDataFileManager.Uncompress(SPRequest request)
[1/27/2012 7:00:29 PM] Progress: Import did not complete.
[1/27/2012 7:00:29 PM] Finish Time: 1/27/2012 7:00:29 PM.
[1/27/2012 7:00:29 PM] Duration: 00:07:51
[1/27/2012 7:00:29 PM] Finished with 0 warnings.
[1/27/2012 7:00:29 PM] Finished with 2 errors.
Hi ,
I have exported a site http://teamsite in share point 2007 set up and try to import in 2010 site
http://mysite using stsadm.The command details is given below.
stsadm -o export -url http://teamsite -filename c:\backup\team.cab -includeusersecurity . it has created 277 cab file . then i have copy these file to 2010 sytem and given the import
command.
stsadm-import -url http://mysite -filename d:\backup\team.cab
and found the above code error. Please send the reply to my email [email protected]

Hi,
Glad to receive your reply.
Based on my research,
out of space on a drive will result in this error. Please check if there is enough space on the drive.
Furthermore, change the user TEMP and TMP to another drive with space, then test again.
Thanks,
Rock Wang
Rock Wang TechNet Community Support

Similar Messages

Failed to open package file due to error 0x800C0006 "The system cannot locate the file in C# code.

Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

"Failed to open package file ..." when modifying job step on remote server

I have SSIS package setup on a remote SQL Server to run on schedule via SQL Server Agent. It was setup initially by remote desktop-ing to the server and connecting to it via SSMS running on the same machine where SQL Server is running. Package source is
"File System" and absolute path is specified (D:\Folder1\Package1.dtsx). There is just one step in the job - to run SSIS package. Everything works as it should.
Now I want to modify this job - change number of retry on failure attempts. I can successfully connect to this SQL Server instance via SSMS from my developer workstation. I can then go to "Advanced Settings" for this job step and change "Retry attempts"
to some other number. However, when I press "OK" I get this error message:
TITLE: SSIS Execution Properties
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
ADDITIONAL INFORMATION:
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
Interestingly enough, in spite of this error message the number of retries is successfully changed.
I understand it happens because SSMS tries to locate package on my local hard drive and the same folder doesn't exist on my development PC. It still doesn't make sense to me. Does SSMS not know I am accessing remote server? How come I don't get any errors
when I just execute this job via SSMS when SSMS runs on my development PC?

Hi, Am facing same issue, but I am trying run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document
full access to which account? also trying to run from where? In the same machine where package resides?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Failed to read wsdl file from url

Hi all,
I am struggling with WL 9.2, consuming a WSRP enabled portlet at the following point:
Having created a proxy portlet, refering to the WSDL of the WSRP producer, I did successfully deploy the portal. When accessing the portal and consuming the portlet the following exception is thrown:
com.bea.wsrp.faults.TransportException: Failed to read wsdl file from url due to -- java.net.ConnectException: Tried all: '8' addresses, but could not connect over HTTP to server: 'www.w3.org', port: '80';
The WSDL includes a schema (http://www.w3.org/2001/XMLSchema). The URL is definetely accessible by the server.
I am open for any kind of support ;) Thanks in advance!
Kind regards,
Matthias

Yes, they are all local schemas. The way ALSB works, even if the import path in the wsdl or parent schema doesn't exist, relative to the current directory, you can specify which schema resolves that reference. My WSDL imports several schemas, all of which import others. When I was done importing all the schemas and resolving references, all the references in WSDLs and XSDs were assigned and valid. However, after all of those imports and reference resolution, it still says the WSDL is invalid, with the following odd error message:
The WSDL is not semantically valid: Failed to read wsdl file from url due to -- java.net.MalformedURLException: no protocol: /XMLSchema/PaymentServices/Resources/PaymentServices-200802.
That path listed refers to one of the schemas imported by the WSDL. The reference to that schema in the WSDL was resolved, and it doesn't complain about that reference.

"An error has occurred opening the package file" in InCopy

Hi there,
I have created an InCopy package file from InDesign CS3 (Mac). I am able to open this package file in InCopy CS3 (Mac) without error. However, two editors working in InCopy CS4 (Windows) on different machines receive the following error message when trying to open the .incp file:
"An error has occurred opening the package file"
I have read AnneMarie's excellent cautionary tales about working in a mixed CS3 / CS4 environment, but my understanding was that simply opening the initial .incp file was unlikely to produce an error.
Can anyone suggest what might be causing the error? Should we conclude that the error stems solely from a CS3 / CS4 conflict?
Thanks!
--Stephen

Great tip about the masked filetype, I hadn't realized these packages were so easily extractable.
However, the error message you're receiving is adding a new layer of complexity. A quick search on these forums reveals this thread:
http://forums.adobe.com/message/2278850
That thread suggests to me that the error may be related to Snow Leopard. We're using Mac OS 10.5.7 here at work. Could I trouble you to open the file on your Windows machine to attempt to replicate the same error we're receiving in Windows here?
And are there any known issues that could prevent a user from opening a package file?
Thanks.
--Stephen

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

When i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File

when i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File
what can i do? how to fix it?

open the cc dektop app -> click preferences -> Select language English (International) -> exit the cc app > restart the cc app > install flash cc.

When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File

When I install Flash Professional CC 2014, I got the Error:
Exit Code: 16 Please see specific errors below for troubleshooting.
For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File

The solution mentioned above doesn't work for me.
Change language, restart Macbook, error again, change language back and forth, restart every time, it just doesn't work.
I was installing same app - Flash Professional CC 2014.
I got the same error
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File
So, same problem, same question.

ERROR: DW039: Failed to load deployment File Lightroom 4.3

I have tried 3 times, including rebooting but still get the same error once the app has downl;oaded, ectracted and then starts the install which gets to about 2% and then the install fails with the notice ERROR: DW039: Failed to load deployment File!!!!

Some additonal detail, Win8 64-bit with a 500GB SSD with approx 25pc free space.
I thought I;d got my copy of Lightroom seperatly to my CS subscription, so had already appplied the 4.3 update via the seperate download. It was only when the applicaiton manager prompted me for Lightroom 4.3 that I realised it came from CS. Interesting that the app manager looks at what it has installed, rather than what is actually installed on the machine.
Running the install from app manager gave this error. I then uninstalled Lightroom, thinking it was a seperate install, and re run the app manager,. Same error. HAve tried the obvious things of deleting temp, clean restarts etc.
Given I had already applied the 4.3 update I think its safe to safe this is bug/error with the CS App Manager installaiton rather than Lightroom 4.3 iteself.
Given the number of people with this commenting, and how many more not commenting, I'm hoping that this thread will come to the attention of Adobe support and get a speedy resolution.

Having trouble downloading app: ERROR: DW039: Failed to load deployment File

I am trying to download Flash Professional CC that I purchased through creative cloud, vut constantly having error (ERROR: DW039: Failed to load deployment File).
Please help!

Hi ji-wonwoo,
Please refer : When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File
Thanks,
Atul Saini

Sql Server 2014 - Error message: Failed to read BLOB column

Hi all,
Am experiencing this error in Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Enterprise Edition (Build 7601: Service Pack 1).
Error messages:
Message: Failed to read BLOB column
Stack:    at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String
strWhereClause, Boolean useTableLockHint, Int32 bcpFileFormatVersion)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
   at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
   at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Please can you assist me on this issue.

The error message states a communication link failure has occurred.
This is most likely a network related error and usually is transient.
Try to generate the snapshot again and see if the error still occurs. If the error still occurs, you will need to have a network admin check the links.
Brandon Williams (blog |
linkedin)

I cannot open Firefox as I get the message that Firefox failed to read configuration file. I uninstalled and reinstalled latest version and still cannot open with the same error.

Last week when the automated upgrade came I said yes and then stopped it midway as it was not a good time to reboot my laptop. Since then, when I try to open it says cannot read configuration file - even when I uninstall and reinstall - still cannot open it with the same error.

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

Stsadm import error[FatalError: Failed to read package file.]

Similar Messages

Maybe you are looking for