Stuck in calculating time remaining, what do i do, its my second airport time capsule that i purchased as the first had a faulty hard drive, why is this soo hard!
This is my second airport time capsule as the first i purchaed had a faulty hard drive, so now, its been a while i keep trying hoping it will work but its always stuck in 'calculating time remaining'. i thought it was my wifi so i connected directly to the capsule using an ethernet cord, bought an adaptor as i have the new macbook air (4m old) 13 inch, still not working. Help please,i am thinknig of just returning it and getting a less expeecsive and easier one to use.
D
Mavericks is the pain here.
It can lose the network connection half way through a backup.
When you connect by ethernet (good to get that.. hope it is the thunderbolt to ethernet).. did you turn off the wireless.. this is important.. nothing changes if the wireless is still on.
I recommend you start over. Keep the wireless on for this part.
Stop the backup.
Factory reset the TC.
Redo the TC setup but this time use all short names, no spaces, pure alphanumeric.
I know the airport utility will suggest apple names..
Fred Blog's Airport Time Capsule.
Don't fall for it.
Use TCgen5
For wireless name use TCwifi (or if you want more control, TC24ghz and change 5ghz to TC5ghz).
Wipe the current TM setup.
Use A4 to reset it. http://pondini.org/TM/Troubleshooting.html
With wireless off now and just ethernet connection try the backup again.
No luck manually mount the TC hard disk in finder. Go/Connect to Server.
AFP://TCname.local (replace TCname with your new nice short name.. and use the domain which is local by default).
OR
Use AFP://10.0.1.1 (Replace with whatever IP the TC uses.. but it must be static.. easy for router mode.. not so easy if the TC is in bridge mode).
The Computer will request the password.. type in whatever password you used for disk access.. by default it ithe device password. If you did not change it then default is public.
This setup has worked for other people.
https://discussions.apple.com/thread/5951390?tstart=0
I cannot guarantee you won't need to reboot the TC oocasionally as it does fall over.
There are other bits that I keep forgetting..
Make sure ipv6 is set to link-local for both wireless and ethernet in the computer.
Once you finish the main backup the short incremental backups can work over wireless.. so just turn wireless back on.
Similar Messages
-
What do I do. I just turned my iPod touch 5 on for the first time in about two months and it telling me that it is disabled for 23,079,134 minutes please help anything would be good I also have not backed it up for a while now
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
What to do that Safari is like the first time who i opened it
How to uninstall Safari?
What can i do that Safari is like the first time where i opened it?
Because i got an Error Message if i would like to open a ne file, and I know that i have to do this that evrything is ok.
So my question: What can i do that Safari is like the first time who I opened it?
Thank you and I hope you understand my english..Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups. -
Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?
I am not sure what you mean by normal external but yes, it is a network hard disk drive.. and you can use wireless.. the only trouble then is, if there is no ethernet connection and internet is by wireless to a different router, then you cannot do both at once.
-
I downloaded a song that I purchased from the ITunes store, but the song does not play properly. How can I re-download the same song without having to purchase it a second time?
I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?
Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion. -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?
Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/ -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?
Try here...
Frequently Asked Questions About Apple ID -
I move folders from my internal hard drive twice to an external hard drive. Now I believe Lr does not know how to find my photos. What can I do to get this cleared up.
Jim has a very good suggestion. There are many factors at work here:
1) How are you connecting the external drive to the computer?
2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
3) What is your computer specification?
4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)? -
Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!
Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/ -
I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time
I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
Thanks.
Maybe you are looking for
-
What are the major differences between the air and the pro
what are the major differences between the air and the pro?
-
Hi! I get the following error message twice when posting a journal: "An error occured when parasing returned XML Only one top level element is aloud in an XML document" Despite the error message the data is sent to the database, the journal works but
-
I'm getting an error when using insertxml and my xml document has dates in it. I have set the procedure "setDateFormat" to the appropriate date mask. I have tried many different date formats and the only way I can get it to work is when there are no
-
Drop Frame being read as Non-Drop Frame
Hey, I'm working in FCP HD 5.1.4 and our guys are shooting audio at drop frame, and video at drop frame, and yet when we import the media into FCP, the Video is in Drop frame, but the audio appears to be Non-drop so we're getting BAD sync (some clips
-
Hello all, I am trying to import a swf file I made with Crystal Xcelsius. When i open the swf in any program (flash player, flash 8, ppt, etc) it works fine. When i import it into captivate 2 I can see it properly in the placeholder but when I previe