Stuck in "working" when trying to logon via Elements 10

I use Photoshop Elements 10. When I click on the home button in the upper right hand corner I am asked to sign in/provide password. I do, then I get stuck in "working". What is happening during this time. Is there something happeneing that I should just allow to continue happening?...

Hi TTTippy
When you click the Home button, Welcome Screen pops up. And on it there is a sign-in button to sign in to photoshop.com
But that no-longer works, because photoshop.com is no longer in service.
So that link will just say working, but won't do anything.So no need to provide your username and password.
Cheers!

Similar Messages

  • Desktop stuck in "working" when trying to sync to 8130

    When trying to use BlackBerry Desktop Manager with my 8130 Perl, it shows connected, but stuck in "working" during the process. I have to stop the program or unplug the device to disconnect. I was using v. 4.7 but went backwards to 4.6 thinking that might help, but it didn't. On the odd occasion it will connect and let me sync. Any suggestions will be greatly appreciated.

    Hi TTTippy
    When you click the Home button, Welcome Screen pops up. And on it there is a sign-in button to sign in to photoshop.com
    But that no-longer works, because photoshop.com is no longer in service.
    So that link will just say working, but won't do anything.So no need to provide your username and password.
    Cheers!

  • Our online number is not working when trying to ca...

    Hej
    Our online number is not working when trying to call from Telia mobile phones in denmark. I have checked with Telia in Denmark and they tell us that the problem is a "prefix" that is set wrong from SKYPE's side?
    Could someone at skype please help get this fixed, as some of our customers can not call us.
    Br.
    Søren

    Hi,
    I have the pretty same problem: cannot receive calls from skype (internet) on my cell phone. I went to Telenor, but they said it has something to do with skype, not with them.
    Skype staff !!! Help ! 

  • Keep getting "itunes not working"  when trying to sync my music to my iphone4

    keep getting "itunes not working"  when trying to sync my music to my iphone4

    Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

  • Iphoto stopped working when trying to export to facebook.  iphoto is froze open with flip down for exporting.  Neither will respond.  Any ideas on how to fix this?

    iphoto stopped working when trying to export pictures to facebook - iphoto page and export flip down froze open -  cannot do anything with them - any idea what's wrong or what I can do to fix this?

    Force Quit iPhoto (Use Force Quit under the Apple Symbol in the upper left of this page). If you continue to have problems please re-post in the iPhoto's forum, it's located at:
    https://discussions.apple.com/community/ilife/iphoto

  • ODI - Error when trying to logon

    Hi,
    Getting this error when trying to logon to ODI. Is it a username/password issue or something differnt? Our backend database is Oracle10g.
    Connection to repository denied
    java.sql.SQLException: socket creation error
    java.sql.SQLException: socket creation error
    at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
    at org.hsqldb.jdbc.jdbcConnection.<init>(jdbcConnection.java:2451)
    at org.hsqldb.jdbcDriver.getConnection(jdbcDriver.java:188)
    at org.hsqldb.jdbcDriver.connect(jdbcDriver.java:166)
    at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
    at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
    at com.sunopsis.sql.i.run(i.java)

    Hi,
    It sounds as if you just haven't started up the Demo Repository first. Designer is trying to connect to the repository.
    Launch this shortcut and then Designer should be ok:
    Start -> ODI -> Examples -> Start Demo Environment
    Thanks,
    Sutirtha

  • No matter how many times I reet my password, it will not work when trying to sign intothe App Store through my iPhone4S.

    No matter how many times I reset my password, it will not work when trying to sign intothe App Store through my iPhone4S.

    What is the error that you are seeing? Try to login using another App like GameCenter or iMessage? Also try logging in to other Apps like Facebook to check if it is your Internet connection problem.

  • HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps.  It also has stop work when trying to down load new Apps.  Any suggestions out their???

    For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps.  Everything else seems to work.  Any suggestions out their???

    I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working.  My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads.  I have checked into my ITunes account and the ID and password are correct  and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work.  My problem seems to be just with trying to use my ID and password when wanting to download new books or apps.  I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel.  This message appears usually ten minutes after I have tried to make a purchase.  At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen.  Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

  • Why this path doesnt work when there is "!DOCTYPE" element?

    Hi, I need to extract contents from an xml file, which looks like
    <hr />
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article PUBLIC "-//ES//DTD journal article DTD version 5.0.1//EN//XML" "xyz501.dtd" > <!-- LINE 1 -->
    <article docsubtype="fla">
    <item-info>
    <jid>YANBE</jid>
    <aid>12941</aid>
    </item-info>
    </article>
    <hr />
    And I have tested with this path "//article/item-info/jid/text()", but it doesnt give me anything. But I noticed that when I remove line 1, it does extract the content "YANBE"...
    why the path doesnt work when there is that DOCYTYPE element? How should I get around with this please?
    Many thanks!

    The extract of XML you gave is not valid (Line 1: <hr/>) but besides that ... I think your problem is in the DTD.
    Somewhere in the DTD it probably 'sneakily' defines a default attribute which in reality is a default-namespace for one of the elements. This means that in your XPath handling, you will have to map a prefix to a namespace-uri (NamespaceContext [1]) and use this newly defined prefix in your XPath expression.
    //tst:article/tst:item-info/tst:jid/text()[1] http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/namespace/NamespaceContext.html

  • "Shared Resources error" when trying to install Photoshop Elements 11

    I keep getting installation error "Shared Resources error" when trying to install Photoshop Elements 11 (Windows 7).  Any advice will be appreciated..

    Welcome to the forum, Ted,
    Here's an older "Shared Technologies" thread: http://forums.adobe.com/message/3155897#3155897
    But, I am not sure that we were ever able to help the OP, and they never reported back with the responses from Adobe. Still, might be a tip that is useful.
    Good luck,
    Hunt
    [Edit] I mis-spoke. The OP and another user with the same error WERE helped. What I saw initially was yet another poster, who was going to contact Adobe, but never came back to the thread. In the case of the OP and another users, the issue was caused by having Adobe Bridge, included with other Adobe programs, like Photoshop and Premiere Pro, running. When they killed that, the installation went well.
    Message was edited by: Bill Hunt

  • How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,

    How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
    @ Alternatively purchase an Elements 9 or 10.  Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
    Apologies if I am using this incorrectly.  My first time here

    Hi.  Thanks for coming back to me.  I am using Mountain Leopard (OSX 10.6.8).  Had major problem and have re-formatted my H/D and re-installing software.  Must have lost a file in the process.  Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.

  • Error code: 213.19 when trying to us Premier Elements 11.

    First, I got the error code: 213.19 when trying to us Premier Elements 11..  I uninstalled and tried again...still getting it.  From what I have read on this forum, it is a licensing issue.  Any suggestions.

    wiiman
    From what you wrote, you are not seeking to deactivate a Premiere Elements serial number from crashed computer. So, the chances seem slim to none about Adobe Chat helping you with a non current version issue. That does not stop you from finding that out for yourself, but I just wanted to prepare you for that possibility.
    Have you tried to troubleshoot the issue yourself in ways other than uninstall reinstall?
    Have you gone through the Adobe document for Photoshop Elements and Premiere Elements on this issue? If not, please review the following Adobe document
    http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html
    Please review, consider, and let us know the outcome.
    Thank you.
    ATR

  • Safari quits when trying to logon to particular sites

    After trying to repair the main volume with Disk Utility with no results I did what the system told me. I re-installed from disc 1, finished up with disc 2.
    All (except the wire router) settings seemed to be ok. I fixed the router also.
    But strangly enough, when trying to log on to Youtube, Safari quits. Also when going to a page of one of my website stores it quits. This is the message that shows up in the error box:
    "The application Safar quit unexpectedly after it was reopened.
    Mac OS X and other applications are not affected.
    Click Try Again to temporarily restore the application's default settings and open it again. Click report to see more details or send a report to Apple."
    I've click the Try Again buttom several times but the same thing happens every time.
    Every once in a while a message with words to the effect of:
    This application's settings are changed, click "..." to temporarily restore defaults settings.
    I don't know what to do at this point to solve this. Any help would be greatly appreciated.
    Milli.

    Since we seem to be embarking on updating in general I'll post my standard post on this.
    Updating
    Certain steps appear to minimize the risk of an update producing problems.
    Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
    Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    You can also go to the step of booting into safe mode to do the install.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
    Repair permissions again afterward.
    It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
    The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
    Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
    [BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
    [Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
    [Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]
    For updating Quicktime I'd run Software Update under the Finder Apple and set it to just download the update (since sometimes failed or slow updates seem to result in corrupt drives). After it is downloaded I'd then install it,

  • JQuery function stops working when trying to submit large amount of parameters

    Hi,
    Run CF9 on Windows 2008 R2 Server.
    I have a cfm page with multiple dropdowns (some are cfselect) and dynamically generated lists of checkboxes interdependent on each other. I am using JQuery to submit data to cfc functions and to display data.
    It was all working fine until we added new company with large number of records. This translated into large URL query string with a lot of parameters submitted for processing. That's when we started to have problems. I noticed when trying to directly submitting URL, if the total number of characters in URL is more than 2114 I get an error status code 302 Redirect and nothing is displayed. 
    I tried to play with postParametersLimit and postSizeLimit increasing to 1000.0 in neo-runtime.xml and restarting server but, this did not help.
    Below is jquery function:
    function populateBills(){
       var plID;
       if ($('#planenrolldate_id').val() == undefined)
        plID = $('input[name=planenrolldate_id]').val();
       else
        plID = $('#planenrolldate_id').val();
       var sID = $('#sponsor_id').val();
       var pID = $('#plan_id').val();
       var fromMonth = $('#from_month').val();
       var fromYear = $('#from_year').val();
       var toMonth = $('#to_month').val();
       var toYear = $('#to_year').val();
       $.ajax({
        type:"POST",
        url:"../components/billing/custompremstatus.cfc?method=GetBillsArr&planenrolldate_id=" + plID + "&sponsorid=" + sID + "&fM=" + fromMonth + "&fY=" + fromYear + "&tM=" + toMonth + "&tY=" + toYear,
        dataType: "json",         
        success:
         function(data){                 
          $.each(data, function(index, item) {
           addBillsCheckboxes(item.bill_id,item.bill_period);
        }, //end the error function
        error:
         function(){
          alert("An error has occurred while fetching bills");
         } //end the error function
       }); // end ajax call      
      } // end of function

    That's exactly from the console after I submit:
    fM  9
    fY  2014
    method  GetBillsArr
    planenrolldate_id[] 564
    planenrolldate_id[] 561
    sponsor_id  59
    tM  9
    tY  2014
    When I check just one planenrolldate_id then it looks like this
    fM  9
    fY  2014
    method  GetBillsArr
    planenrolldate_id[] 561
    sponsor_id  59
    tM  9
    tY  2014
    This it cfc part:
    <cffunction name="GetBillsArr" access="remote" returnFormat="json" returnType="array">
            <cfargument name="sponsor_id" type="any" required="true">
            <cfargument name="planenrolldate_id" type="any" required="true">
            <cfargument name="fM" type="numeric" required="true">
            <cfargument name="fY" type="numeric" required="true">
            <cfargument name="tM" type="numeric" required="true">
            <cfargument name="tY" type="numeric" required="true">
            <cfset var result=ArrayNew(1)>
            <cfset var i = 0>
             <cfif ARGUMENTS.planenrolldate_id EQ "" OR ARGUMENTS.sponsor_id EQ "">
                <cfset LstBills = QueryNew("bill_id, bill_period", "Integer, Varchar")>
            <cfelse>
                <cfquery name="LstBills" ...>
                    SELECT bill_id,
                        (Convert(varchar(10),billing_start_date,103) + ' - ' + Convert(varchar(10),billing_end_date,103)) + ' [' + Convert(varchar(6),plan_id) + ']' AS bill_period
                        FROM ...
                </cfquery>           
            </cfif>
            <cfloop query="LstBills">
                <cfset returnStruct = StructNew()>
                <cfset returnStruct["bill_id"]= bill_id>
                 <cfset returnStruct["bill_period"] = bill_period>
                 <cfset ArrayAppend(result,returnStruct) />
            </cfloop>
            <cfreturn result>
    </cffunction>

  • NavigateToURL() not working when trying to open a file.

    Hi,
    I am working on an AIR Flex application running on the local Windows system.
    Following code works when accessing the file from my local system.
    I want to display a file which is present in a remote server.
    In ActionScript, The below code does NOT work.
    var url:String = "\\<RemoteServerName>\d1\abc.pdf";
    var   request:URLRequest = new URLRequest(url);  
    flash.net.navigateToURL(request,
    "_blank");
    When I am trying to open the file manually, e.g. Start -> Run -> Open (\\<RemoteServerName>\d1\abc.pdf), the document opens fine.
    Please let me know if there are any other way of opening a file from remote location.
    Thank You,
    Sway

    Thanks rkewlani,
    I think I am geting closer for a solution though I am getting a new error after changing the URL.
    My new url:String looks like
    var url:String = file:\\RemoteServerName\d1\abc.pdf;
    var  request:URLRequest = new URLRequest(url);
    flash.net.navigateToURL(request,"_blank");
    Error I get is :
    SecurityError: Error #2121: Security sandbox violation: navigateToURL: app:/XXX.swf cannot access file:\\RemoteServerName\d1\abc.pdf;. This may be worked around by calling Security.allowDomain.
    I added Security.allowDomain("*") to the creationComplete event of the form, Now the error is
    SecurityError: Error #3207: Application-sandbox content cannot access this feature.
    at flash.system::Security$/allowDomain()
    Any help on this.
    Thanks,
    Sway 

Maybe you are looking for