Stuck Receive XML PO event

Several Receive XML PO events from Send XML Document workflows are "stuck" and we're unable to get them to a completed state (there is an ECX Main Error Process child underneath; we can clear the error, but it doesn't help). The Transaction Monitor shows the POs generated from the original POXML workflow are there, but they're in an error state and we can't select the "check box" and act on them since they're greyed-out.
Any thoughts out there? Thanks!!!

Hi Vishal,
Assuming you are using R12+, you can have seperate templates used for differrent OUs. In the PO Approval workflow it shall pick the respective template.
During submission of concurrent program "PO Output for Communication", you can specify the right template in the input parameters.
Regards,
G V Ranjith

Similar Messages

Overflow Map has received an inexplicable event from the front map

Hello, I am posting this to ask if someone can shed additional light on this error. Is it due to incorrect usage of the SafeNamedCache or an internal error?
2006-12-07 20:33:59.190 Tangosol Coherence 3.1/339 <Warning> (thread=RMI TCP Connection(3)-127.0.0.2, member=1): Overflow Map has received an inexplicable event from the front map; such an event should not have been possible to occur. The Overflow Map will arbitrarily interpret the event in order to maintain its own internal consistency. The likely origin of the event is direct modification of the front and/or back maps managed by the Overflow Map, a MapListener making re-entrant modifications to its source map, or an ObservableMap implementation that reacts to the Map API in a manner inconsistent with the specification (e.g. actively modifying its contents in a manner that differs from the sequence of API calls made against it). This Overflow Map instance will not repeat this warning, and will attempt to silently compensate for subsequent similar event irregularities.
Event: MapEvent{ObservableHashMap added: key=CalypsoCache|22845412, value=Lease: CalypsoCache|22845412 (Cache=TangosolLock._locks, Size=Unknown, Version=0/0, IssuerId=0, HolderId=0, Status=LEASE_UNISSUED, Last locked at Wed Dec 31 16:00:00 PST 1969)}
Stack trace follows:
at com.tangosol.net.cache.OverflowMap.warnUnfathomable(OverflowMap.java:2947)
at com.tangosol.net.cache.OverflowMap.putInternal(OverflowMap.java:1001)
at com.tangosol.net.cache.OverflowMap.put(OverflowMap.java:360)
at com.tangosol.coherence.component.util.CacheHandler.ensureLease(CacheHandler.CDB:15)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.ReplicatedCache.lockResource(ReplicatedCache.CDB:29)
at com.tangosol.coherence.component.util.CacheHandler.lock(CacheHandler.CDB:3)
at com.tangosol.coherence.component.util.SafeNamedCache.lock(SafeNamedCache.CDB:1)
at com.calypso.tk.lock.TangosolLock.acquire(TangosolLock.java:24)
at com.calypso.tk.lock.DistributedReentrantLock.acquire(DistributedReentrantLock.java:50)
at com.calypso.tk.util.cache.CalypsoCache.lock(CalypsoCache.java:1772)
at com.calypso.tk.util.cache.CalypsoCache.getImpl(CalypsoCache.java:1325)
at com.calypso.tk.util.cache.CalypsoCache.peekImpl(CalypsoCache.java:1320)
at com.calypso.tk.util.cache.CalypsoCache.peek(CalypsoCache.java:244)
at com.calypso.tk.util.cache.CalypsoCache.put(CalypsoCache.java:314)
at com.calypso.tk.core.sql.BookSQL.putInCache(BookSQL.java:314)
at com.calypso.tk.core.sql.BookSQL.loadAll(BookSQL.java:1494)
at com.calypso.tk.core.sql.BookSQL.loadAll(BookSQL.java:1158)
at com.calypso.tk.core.sql.BookSQL.load(BookSQL.java:1186)
at com.calypso.tk.core.sql.BookSQL.getBook(BookSQL.java:545)
at com.calypso.tk.core.sql.BookSQL.get(BookSQL.java:237)
at com.calypso.tk.refdata.sql.UserDefaultsSQL$UserDefaultsLoader.buildObjectFromResultSet(UserDefaultsSQL.java:307)
at com.calypso.tk.core.sql.SQLObjectPersistor.executeSQL(SQLObjectPersistor.java:399)

It is quite strange, of course, to have confusion with which config is being used, which is why there is now a log message telling you which config was loaded. I think that the log message was introduced in version 3.1 or 3.2.
The other thing that I do (at least when testing something) is specify the config on the command line, e.g.
java -server -Xms128m -Xmx128m -Dtangosol.coherence.cacheconfig=C:\java\dev\test-cache-config.xml -cp coherence.jar;tangosol.jar;...
BTW, I have downloaded 3.2.1 and will be using that for my tests. So presumably the warning/error will no longer occur? That is our expectation, since it would be a bug (unless you were doing one of the weird things mentioned in the message).
Keep in mind that even with the message, the Overflow Map keeps going; it is just a warning (albeit a complicated sounding one) that indicates that some internal state (or event stream or lack thereof) is not what was expected as the result of one or more actions.
I apologize for the inconvenience, and thank you for taking your time to clarify it. We do work hard to avoid this type of issue (or any related confusion), and we have continued to increase our unit and regression test coverage with each release, including with respect to this issue. With that in mind, please do not hesitate to contact us (on this forum if you would like) with suggestions and other feedback; we do want to be aware of the things that our customers are looking for and would like to see improved.
Peace,
Cameron Purdy
Tangosol Coherence: The Java Data Grid

Receiving a calendar event message from a third party on a BB Z10

I have a BB Z10 on the UK Vodafone network. My Z10 is set to GMT time and correctly shows that I am in the "Dublin, London" time zone. This is the GMT time zone description that all BB devices that I have ever owned have shown.
This afternoon (UK time) i received a calendar event notification from a client who I have since established was at his desk in London when he sent the message advising me of a conference call to take place next week.
The advice on the Z10 has five clear sections: "Status", "Date", a bell symbol to indicate when the reminder will sound, and a fifth symbol indicating the number on which to call in, and the PIN code.
However, and this is my serious problem, there is a third section on the advice which has a globe symbol and appears to exist to indicate where the person setting up the event was located when he/she sent the message. In the specific case of which I write, the message states "This event is displayed in local time, but was created in Reykjavik (GMT) [sic}". The actual message shows the time for the event as one hour later than the actual time that the event is scheduled to take place - in other words GMT + 2 hours - namely the time in continental Europe and Reykjavik.
I have serious issues with this:
1) Is it the real intention to indicate where the sender of the message was located when the message was sent?
2) if yes, this is a serious breach of privacy
3) if yes, the location is wrong, as the person who sent me the message has confirmed that he was at his desk in London
4) if no what is the purpose in indicating where "the message was created" (BB's words - not mine)
5) the indicated time of the event is wrong - it has assumed a different time zone than that in which I and the sender are located.
Has anyone else encountered this problem and what has BB got to say about it???
Thanks
PJCMoray
PJCMoray

I received the e-mail notification on Microsift Outlook from a third party (i.e. not someone within my own organisation).
The same invite on both my lap-top computer and my BB 9900 Bold did not have any mention about the sender being in Iceland (or anywhere else!) and showed the correct time and time-zone for the agreed meeting - namely, 8,30am on Friday the 19th April.
I confirm that my Z10 is set to the "Dublin, London (+0)" time zone and is currently showing the correct British Summer Time of 16.31. The device switched automatically to British Summer Time on Sunday 31st March.
I would welcome your comments.
In every other respect (apart from the infamous Outlook USB synching issue about which I am sure you have heard more than enough!!), the Z10 is an outstanding device and deserves to be the device which at long last wipes the smile off the faces of those equine rumps in Cupertino, California!!
I am expecting the roll-out of the Q10 in the UK in a couple of weeks - please??!!
Thanks again for your help and assistance
PJCMoray
PJCMoray

How send and receive XML file from PI 7.0 via SSL

Hello experts,
Can you point to some documentation , examples , links where I can get some information on how to send and receive XML files using PI 7.0 via SSL ?
Thanks in advance.

Hi,
refer to the following links.
Enabling SSL
http://help.sap.com/saphelp_nwpi71/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Adapter specific security
http://help.sap.com/saphelp_nwpi71/helpdata/en/f5/799add57aeee4f889265094a04695c/frameset.htm
regards,
MIlan Thaker.

RemoteApp receives multiple KeyUp events without any keys being pressed

Hi All,
I have a very simple winforms app that I am using to try and track down what is happening with keyboard events when using RemoteApp.
Basically I have a form and a textbox that track the KeyDown, KeyPress and KeyUp events.
As soon as I start my app via RemoteApp I receive multiple KeyUp events without even pressing a key.
Does anyone know why RemoteApp would be sending these random KeyUp events.
The code of my simple test app is as follows:
Public Class Form1
Dim lst As New List(Of String)
Private Sub AddtoList(str As String)
lst.Add(str)
End Sub
Private Sub TextBox1_KeyDown(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
AddtoList("txt KeyDown" & vbTab & "KeyCode is " & e.KeyCode)
End Sub
Private Sub TextBox1_KeyPress(sender As Object, e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
AddtoList("txt KeyPress" & vbTab & "KeyChar is " & e.KeyChar)
End Sub
Private Sub TextBox1_KeyUp(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyUp
AddtoList("txt KeyUp" & vbTab & "KeyCode is " & e.KeyCode)
End Sub
Private Sub Form1_FormClosing(sender As Object, e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
AddtoList("Form Closing")
IO.File.AppendAllLines(Application.StartupPath & "\SimpleKeyUp_v2.txt", lst)
End Sub
Private Sub Form1_KeyDown(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyDown
AddtoList("Form KeyDown" & vbTab & "KeyCode is " & e.KeyCode)
End Sub
Private Sub Form1_KeyPress(sender As Object, e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress
AddtoList("Form KeyPress" & vbTab & "KeyChar is " & e.KeyChar)
End Sub
Private Sub Form1_KeyUp(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyUp
AddtoList("Form KeyUp" & vbTab & "KeyCode is " & e.KeyCode)
End Sub
Private Sub Form1_Load(sender As Object, e As System.EventArgs) Handles Me.Load
AddtoList("Form Load")
End Sub
End Class
Simply opening and closing the app via RemoteApp gives the following results:
Form Load
Form KeyUp KeyCode is 9
txt KeyUp KeyCode is 9
Form KeyUp KeyCode is 16
txt KeyUp KeyCode is 16
Form KeyUp KeyCode is 16
txt KeyUp KeyCode is 16
Form KeyUp KeyCode is 17
txt KeyUp KeyCode is 17
Form KeyUp KeyCode is 17
txt KeyUp KeyCode is 17
Form KeyUp KeyCode is 9
txt KeyUp KeyCode is 9
Form KeyUp KeyCode is 18
txt KeyUp KeyCode is 18
Form KeyUp KeyCode is 9
txt KeyUp KeyCode is 9
Form KeyUp KeyCode is 18
txt KeyUp KeyCode is 18
Form KeyUp KeyCode is 9
txt KeyUp KeyCode is 9
Form Closing
Cheers and Thanks in Advance!
Dwayne

Hi,
It seems that your issue has been out of the scope of this forum.For coding issue,I suggest you ask in the
MSDN forum to see whether anyone can help you out.
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

VI containing Event Structure will not receive front panel events in LabVIEW Real-Time.

Hi again, I'm working in my first UI (attached VI).
It works when running directly from PC. It doesn't when running from cRIO, there's the message "VI containing Event Structure will not receive front panel events in LabVIEW Real-Time". I've been reading and I found that "Event structures on RT targets do not support events associated with user interface objects, such as VI panels or controls. For example, associating the Value Change event with a control does not work. RT targets support only user events".
Is that the problem? If it is, how can I create Mouse Up, Mouse Enter, Value Change (or other user interface events) user events?
If I run my VI in FPGA mode should it run?
Attachments:
HMI.vi ‏33 KB

Since it looks like you are new to the whole RT and machine control, I recommend giving this a good read: NI LabVIEW for CompactRIO Developer's Guide
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to receive XML from Flex HTTP POST

Hi,
We curreontly have a setup where we have a FLEX frontend send an XML through a HTTP POST and awaiting a response also in XML. On the backend this is handled relatively simply by a PHP script that basically does the following:
read data (in XML)from FlEX HTTP POST into a new temp XML file.
execute a c++ program with the XML file as one of the parameter.
return the result to FLEX
We have decided to move to BlazeDS for various reasons.
Looking at the examples bundled with BlazeDS they have a jsp example that returns an XML result to FLEX so that part is fine. I am trying to find an example of JSP (or Servlet) that is able to read the XML data from FLEX and write it into a temp XML file. I would then try to use runtime.exec to invoke a local C++ program to process the XML file the result of which will be sent back to FLEX.
Any help will be very much appreciated!

<div class=Section1> color:#1F497D'>I’d avoid calling an executable just to process XML –your application server would provide enough support for reading and writing XML, no? Also, if you’re only planning on working with XML then even BlazeDS might be overkill because its focus is on sending strongly typed ActionScript data efficiently to and from a client (it’s true that it does have a proxy service, but that is not involved with processing the actual XML data).<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'>How complex is your XML? Do you need to resolve ids and references or can you parse it top down in a single pass? There are several well known libraries in Java for dealing with XML – the choice depends on how you need to interact with the XML. Most of them take an InputStream as a source for reading XML and you can get the InputStream from the servlet request. Googling should turn up numerous examples.<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'>Pete<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt'> <div> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> khwong [mailto:[email protected]] Sent: Sunday, September 28, 2008 12:09 PM To: [email protected] Subject: How to receive XML from Flex HTTP POST<o:p></o:p> </div> </div> <o:p> </o:p> A new discussion was started by khwong in General Discussion -- How to receive XML from Flex HTTP POST Hi, We curreontly have a setup where we have a FLEX frontend send an XML through a HTTP POST and awaiting a response also in XML. On the backend this is handled relatively simply by a PHP script that basically does the following: read data (in XML)from FlEX HTTP POST into a new temp XML file. execute a c++ program with the XML file as one of the parameter. return the result to FLEX We have decided to move to BlazeDS for various reasons. Looking at the examples bundled with BlazeDS they have a jsp example that returns an XML result to FLEX so that part is fine. I am trying to find an example of JSP (or Servlet) that is able to read the XML data from FLEX and write it into a temp XML file. I would then try to use runtime.exec to invoke a local C++ program to process the XML file the result of which will be sent back to FLEX. Any help will be very much appreciated! <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b69b23">How to receive XML from Flex HTTP POST</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b69b23!folder=.3c061a83">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div> </div>

Receive xml as string from OSB and pass it to Bpel

I was given xml and DTD by our external partners. I need to receive this xml, parse this and insert some of the
values of the elements into DB.
Question1:
Since I don't have WSDL, can I receive xml in string and pass it on to OSB BS which calls Bpel process?
If yes, how and can I get any example?
How do I set up osb bs service to talk to bpel?
I have installed oracle soa suite 10g with patch set 4. This runs with Oracle AS. I have my Bea weblogic 10.3 with OSB installed.
Both the servers are running seperately.

If I use
string to xml --- fn-bea:inlinedXML()
How do I extract a value of an element? When I log the xml that got extracted from a string, I only see the values of elements with no element names:
eg: if incoming string format of xml is:
<Customer>
<name>aaa</name>
<address>bb</address>
</Customer>
After fn-bea:inlinedXML($body)
I see:
aaa
bbb
in the log, but with no element names

Receive XML with Business Connector, convert to IDoc

Hi all,
I am trying to receive XML files with SAP Business Connector (4.7) and convert them to IDOC and then forward the IDoc file to SAP System.
At the moment, I have to do the testing for this.
I don't know how to send the XML file to the special port (5555) of the server. I read that there are serveral possibilities like http, mail, ftp. Can anybody give me an advice how this works?
Next problem is to get the created IDoc file to the SAP system. The SAP server is added in the SAP Business Connector and the connection works.
I would be very pleased if anybody could help me.
Thanks in advance!
Kai

hi,
What i understand from your scenario is XI> BC> SAP system.
1)XI-->BC
U need to configure XI's-BCAdapeter(as receiver).
in URL specify teh follwoing :
http://<hostname>:5555/invoke/folder1.folder2./<service-to-be invoked>
together with the username and password.
2) BC--> SAP
To invoke an IDoc, go to Routing rules and specify the sender, receiver, and the Message Type(IDoc name). In the next page, specify the name of the flow service to be created. and the Flowservice to be invoked whenever a message comes in.
Hope this gives you some input.
Regards,
Siva Maranani

Error in "---- RECEIVING XML ----", WL 6.1, sp 2 for Windows

I have changed a few names and run the webservices/message example. The ConsumerClient.java
when initially started has thrown exception regarding illegal character.
The RECEIVING XML is generated by the server and, in case of ConsumerClient, all
code is produced by wsgen utility. My guess is that the problem is caused by the
line
 
where quotes are missed.
So, is this a bug in WL 6.1, sp 2 for Windows ? The output follows:
------------- RECEIVING XML -------------
<definitions
targetNamespace="urn:local"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:local"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/1999/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<schema targetNamespace='urn:local'
xmlns='http://www.w3.org/1999/XMLSchema'>
</schema>
</types>
<message name="receiveRequest">
</message>
<message name="receiveResponse">
<part name="result" type="xsd:anyType" />
</message>
<portType name="dpsfGetWSPortType">
<operation name="receive">
<input message="tns:receiveRequest"/>
<output message="tns:receiveResponse"/>
</operation>
</portType>
<binding name="dpsfGetWSBinding" type="tns:dpsfGetWSPortType"><soap:binding style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="receive">
<soap:operation soapAction="urn:receive"/>
<input><soap:body use="encoded" namespace='urn:dpsfGetWS' encodingStyle="http://xml.apache.org/xml-soap/literalxml
http://schemas.xmlsoap.org/soap/encoding/"/></input>
<output><soap:body use="encoded" namespace='urn:dpsfGetWS' encodingStyle="http://xml.apache.org/xml-soap/literalxml
http://schemas.xmlsoap.org/soap/encoding/"/></output>
</operation>
</binding>
<service name="dpsfGetWS"><documentation>todo</documentation><port name="dpsfGetWSPort"
binding="tns:dpsfGetWSBinding"><soap:address location="http://localhost:7001/dpfswsGetInit/receiveMsg"/></port><
/service></definitions>
-------------- SENDING XML --------------
<?xml version='1.0' encoding='UTF-8'?><SOAP-ENV:Envelope xmlns:SOAP-ENV='http://schemas.xmlsoap.org/soap/envelope/'
xmlns:SOAP-ENC='http://schemas.xmlsoap.org/soap/encoding/' xmlns:xsi='http://www.w3.
org/1999/XMLSchema-instance' xmlns:xsd='http://www.w3.org/1999/XMLSchema'><SOAP-ENV:Body><ns0:receive
xmlns:ns0='urn:dpsfGetWS' SOAP-ENV:encodingStyle='http://xml.apache.org/xml-soap/literalxml
http:/
/schemas.xmlsoap.org/soap/encoding/'></ns0:receive></SOAP-ENV:Body></SOAP-ENV:Envelope>-------------
RECEIVING XML -------------
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 500--Internal Server Error</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic htmlKona WebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 ">
</HEAD>
<BODY bgcolor="white" alink="#397F70" link="#640078" vlink="#DE7E00">
 
<TABLE border=0 cellspacing=5><TR><TD> 
<H2>Error 500--Internal Server Error</H2>
</TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><H3>From RFC 2068 Hypertext
Transfer Protocol -- HTTP/
1.1:</H3>
<H4>10.5.1 500 Internal Server Error</H4>
The server encountered an unexpected condition
which prevented it from fulfilling the request.
</TD></TR>
</TABLE>
</BODY>
</HTML>
Scanner has tokens:
[OPENTAGBEGIN]
[NAME] (META)
[NAME] (NAME)
[CHARDATA] (GENERATOR)
[NAME] (CONTENT)
[CHARDATA] (WebLogic htmlKona WebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 )
[TAGEND]
[SPACE] (
[CLOSETAGBEGIN]
[NAME] (HEAD)
[TAGEND]
[SPACE] (
[OPENTAGBEGIN]
[NAME] (BODY)
[NAME] (bgcolor)
[CHARDATA] (white)
[NAME] (alink)
[CHARDATA] (#397F70)
[NAME] (link)
[CHARDATA] (#640078)
[NAME] (vlink)
[CHARDATA] (#DE7E00)
[TAGEND]
[SPACE] (
[OPENTAGBEGIN]
[NAME] (FONT)
[NAME] (FACE)
E7E00">
<FONT FACE=e <-- bad character
Exception in thread "main" Error at line:8 col:13 Line:8 ''' expected, got char[72]
at weblogic.xml.babel.baseparser.SAXElementFactory.createSAXParseException(SAXElementFactory.java:60)
at weblogic.xml.babel.parsers.StreamParser.streamParseSome(StreamParser.java:130)
at weblogic.xml.babel.parsers.BabelXMLEventStream.parseSome(BabelXMLEventStream.java:46)
at weblogicx.xml.stream.XMLEventStreamBase.hasNext(XMLEventStreamBase.java:135)
at weblogicx.xml.stream.XMLEventStreamBase.hasStartElement(XMLEventStreamBase.java:258)
at weblogicx.xml.stream.XMLEventStreamBase.hasStartElement(XMLEventStreamBase.java:171)
at weblogicx.xml.stream.XMLEventStreamBase.startElement(XMLEventStreamBase.java:164)
at weblogic.soap.codec.SoapMessage.read(SoapMessage.java:86)
at weblogic.soap.WebServiceProxy.receive(WebServiceProxy.java:464)
at weblogic.soap.WebServiceProxy.invoke(WebServiceProxy.java:430)
at weblogic.soap.SoapMethod.invoke(SoapMethod.java:186)
at examples.webservices.message.ConsumerClient.main(ConsumerClient.java:57)
Thank you.
-Michael

Hi Michael,
Thanks a lot for such detailed description. You know, I've considered this bug
until I've found out that it works OK for my case if I DO NOT change <destinationtype>
setup from "topic" to "queue". Actually, I do care about it mostly from the consistency
perspective. This a small fly in comparison to the BUG I've found next.
Currently, I am contacting BEA Support with that regard. In short words, I've
found that 1) if you build WS on the top of JMS Queue; 2) use the webservices.message.ConsumerClient
from WL examples or similar; 3) run this Client several times closing the Client
application after each run; 4) control how many consumers your JMS Queue has after
each run - you will see that the number of active consumers becomes equal the
number of your runs. That is, WS initiated by each ConsumerClient remains connected
to the destination, i.e. the Queue, even when the real client - ConsumerClient
- is dead already. This results in multiple consumers for the same JMS Queue,
i.e. now the JMS decides which consumer would get the message from the queue,
i.e. your ConsumerClient has a chance of never getting the message and wait forever.
I believe, the WS engaged by ConsumerClient in this use-case MUST close JMS connection
by itself or on command somehow.
Hey, please tell me more about "Bavarian Hat Dance", I am not familiar with this
dance.
Sincerely,
Michael
"Michael Wooten" <[email protected]> wrote:
>
Hi Michael,
(Hey my name is Michael too!)
You are probably right that this is a bug in wsgen (not neccessarily
WLS - wsgen
!= WLS)! I would try to remove all the output files generated by wsgen
(i.e. ear
file, jar file for EJB, directory used to build EJB, client.jar, etc),
first.
Be careful not to mistakenly remove the source files (i.e. build.xml,
etc.), though.
Then I would stop WLS (if it's not already stopped), and remove the .wl_temp_do_not_delete
directory, under the applications directory of the domain (i.e. config/examples,
etc) directory you are using. Don't worry - WLS will recreate this directory
the
next time it is started. Finally, I would make sure the build.xml had
no "lingering
references" to the queue stuff, and re-run wsgen. Also, make sure the
information
in the config.xml is accurate. Regardless of whether this "Bavarian Hat
Dance"
works or not, it's probably an "eight-legger" (or "six-legger")!
Regards,
Mike Wooten
"Michael Poulin" <[email protected]> wrote:
My further investigation has shown that this error comes if I set destinationtype="queue"
in <messageservice /> in wsgen task ( in build.xml ). If destinationtype="topic"
it works properly. The most confusing thing is that I have only theQueue
configured
in WL JMS server.
This destinationtype="queue"/"topic" issue in my test-case appearesas
an obvious
BUG in WL Web Services, i.e. in wsgen.
-Michael Poulin
"Michael Poulin" <[email protected]> wrote:
I have changed a few names and run the webservices/message example.The
ConsumerClient.java
when initially started has thrown exception regarding illegal character.
The RECEIVING XML is generated by the server and, in case of ConsumerClient,
all
code is produced by wsgen utility. My guess is that the problem is
caused
by the
line
 
where quotes are missed.
So, is this a bug in WL 6.1, sp 2 for Windows ? The output follows:
------------- RECEIVING XML -------------
<definitions
targetNamespace="urn:local"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:local"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/1999/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<schema targetNamespace='urn:local'
xmlns='http://www.w3.org/1999/XMLSchema'>
</schema>
</types>
<message name="receiveRequest">
</message>
<message name="receiveResponse">
<part name="result" type="xsd:anyType" />
</message>
<portType name="dpsfGetWSPortType">
<operation name="receive">
<input message="tns:receiveRequest"/>
<output message="tns:receiveResponse"/>
</operation>
</portType>
<binding name="dpsfGetWSBinding" type="tns:dpsfGetWSPortType"><soap:binding
style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="receive">
<soap:operation soapAction="urn:receive"/>
<input><soap:body use="encoded" namespace='urn:dpsfGetWS' encodingStyle="http://xml.apache.org/xml-soap/literalxml
http://schemas.xmlsoap.org/soap/encoding/"/></input>
<output><soap:body use="encoded" namespace='urn:dpsfGetWS' encodingStyle="http://xml.apache.org/xml-soap/literalxml
http://schemas.xmlsoap.org/soap/encoding/"/></output>
</operation>
</binding>
<service name="dpsfGetWS"><documentation>todo</documentation><portname="dpsfGetWSPort"
binding="tns:dpsfGetWSBinding"><soap:address location="http://localhost:7001/dpfswsGetInit/receiveMsg"/></port><
/service></definitions>
-------------- SENDING XML --------------
<?xml version='1.0' encoding='UTF-8'?><SOAP-ENV:Envelope xmlns:SOAP-ENV='http://schemas.xmlsoap.org/soap/envelope/'
xmlns:SOAP-ENC='http://schemas.xmlsoap.org/soap/encoding/' xmlns:xsi='http://www.w3.
org/1999/XMLSchema-instance' xmlns:xsd='http://www.w3.org/1999/XMLSchema'><SOAP-ENV:Body><ns0:receive
xmlns:ns0='urn:dpsfGetWS' SOAP-ENV:encodingStyle='http://xml.apache.org/xml-soap/literalxml
http:/
/schemas.xmlsoap.org/soap/encoding/'></ns0:receive></SOAP-ENV:Body></SOAP-ENV:Envelope>-------------
RECEIVING XML -------------
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 500--Internal Server Error</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic htmlKona WebLogic Server 6.1
SP2 12/18/2001
11:13:46 #154529 ">
</HEAD>
<BODY bgcolor="white" alink="#397F70" link="#640078" vlink="#DE7E00">
 
<TABLE border=0 cellspacing=5><TR><TD> 
<H2>Error 500--Internal
Server Error</H2>
</TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100%
BGCOLOR=white><H3>From RFC 2068
Hypertext
Transfer Protocol -- HTTP/
1.1:</H3>
<H4>10.5.1 500 Internal Server
Error</H4>
The server encountered an unexpected
condition
which prevented it from fulfilling the request.
</TD></TR>
</TABLE>
</BODY>
</HTML>
Scanner has tokens:
[OPENTAGBEGIN]
[NAME] (META)
[NAME] (NAME)
[CHARDATA] (GENERATOR)
[NAME] (CONTENT)
[CHARDATA] (WebLogic htmlKona WebLogic Server 6.1 SP2
12/18/2001
11:13:46 #154529 )
[TAGEND]
[SPACE] (
[CLOSETAGBEGIN]
[NAME] (HEAD)
[TAGEND]
[SPACE] (
[OPENTAGBEGIN]
[NAME] (BODY)
[NAME] (bgcolor)
[CHARDATA] (white)
[NAME] (alink)
[CHARDATA] (#397F70)
[NAME] (link)
[CHARDATA] (#640078)
[NAME] (vlink)
[CHARDATA] (#DE7E00)
[TAGEND]
[SPACE] (
[OPENTAGBEGIN]
[NAME] (FONT)
[NAME] (FACE)
E7E00">
<FONT FACE=e <-- bad character
Exception in thread "main" Error at line:8 col:13 Line:8 ''' expected,
got char[72]
at weblogic.xml.babel.baseparser.SAXElementFactory.createSAXParseException(SAXElementFactory.java:60)
at weblogic.xml.babel.parsers.StreamParser.streamParseSome(StreamParser.java:130)
at weblogic.xml.babel.parsers.BabelXMLEventStream.parseSome(BabelXMLEventStream.java:46)
at weblogicx.xml.stream.XMLEventStreamBase.hasNext(XMLEventStreamBase.java:135)
at weblogicx.xml.stream.XMLEventStreamBase.hasStartElement(XMLEventStreamBase.java:258)
at weblogicx.xml.stream.XMLEventStreamBase.hasStartElement(XMLEventStreamBase.java:171)
at weblogicx.xml.stream.XMLEventStreamBase.startElement(XMLEventStreamBase.java:164)
at weblogic.soap.codec.SoapMessage.read(SoapMessage.java:86)
at weblogic.soap.WebServiceProxy.receive(WebServiceProxy.java:464)
at weblogic.soap.WebServiceProxy.invoke(WebServiceProxy.java:430)
at weblogic.soap.SoapMethod.invoke(SoapMethod.java:186)
at examples.webservices.message.ConsumerClient.main(ConsumerClient.java:57)
Thank you.
-Michael

Creating ABAP webservice to receive XML message

Hi All,
I have a requirement to create an webservice/application in SAP ECC6 system which will receive XML message through a http request, parse the XML and update the data in some Z tables.
Does anyone have any idea how to achieve that ?
Do I need to write a BSP application/ WebDynpro for ABAP application ?
Any input is highly appreciated.
Points will be rewarded for helpful answers.
Thanks,
Atanu

Hi Atanu,
You do not need BSP/WebDynpro for this. Please go through the links below.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46d6c25d-0b01-0010-06a9-8e8218753c02">1. SAP Webservice</a>
<a href="/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap Consuming Web Service from ABAP</a>
Please reward points if you find them useful.
Cheers,
Sougata.

Deserialize_header error webserivce while receiving XML message

Hi,
I am using weservice. When i check in Payload Trace in SOAMANAGER. I can see the proper Request and Response Payload.
However there is a deserialize_header error in CL_SOAP_MESSAGE_11 at position id 1with internal error id 14.
It says there is an unexpected element.
Why is this error coming?
Is there some configuration that is needed to receive XML message?
Thanks,
Girishkumar Hegde

The problem is solved now.
There was an error in the incoming message

How JTextArea may receive System.out events?

Dear JDevelopers,
How JTextArea may receive System.out events?
It's only have append method which receive string as input parameter.
I want to create GUI application which will show loggin which, by default, directed into System.out, but I want to redirect it in JTextArea.
How can I implement it easy? I don't want to write listeners and events.

Swing related questions should be posted in the Swing forum. Search the forum other discussions on this topic. You can start by using "setOut" as a keyword. You may want add "console" as a second keyword to the narrow the search.

My schedule does not receive invitations to events

My schedule does not receive invitations to events, i Have a icloud Account, my invites arrive to my friends, but theyr never arrive, why?

Hi matthuynh,
Welcome to the Apple Support Communities!
I understand you are not receiving iMessages when you are not connected to the internet. You will need some sort of data connection to receive an iMessage, Wi-Fi or cellular data. If you are connected to data and are still not receiving iMessages please you the information in the following article to isolate and resolve the situation.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Please let me know if I can be of further assistance.
Have a great day,
-Joe

Using iCal and I have received a meeting event and wish to forward it to another colleague ...how do i do this - thanks

I am using iCal and I have received a meeting event and wish to forward it to a colleague - how do I do this ??

Can you also try using the Save as option from with in the Reader plugin when you are viewing the PDF in Browser. The save as button is available on the HUD shown when PDF is opened in browser and you bring the mouse pointer to bottom-center position. Please refer the following screenshot:
If you are viewing the PDF file in classic mode, the save as button is located as shown below:
Please let us know if this workaround resolves the issue that you are facing.
Regards,
Shashi

Stuck Receive XML PO event

Similar Messages

Maybe you are looking for