Stylesheet Formatting Has "Disconnected"

Hoepfully, I can describe this rather annoying issue clearly in order to garner the apt solution:
I copy and paste html code from a page in Dreamweaver, into a web based aplication which then applies the page to a web site
I do this because it is easier fro me to use Dreamweaver to make changes to the HTML [using the design screen]
Having made some minor changes to a table and added a simple graphic, I then copy the html and paste into the web application.
I then discover that the live page renders all the formatting incorrectly and it would appear has become disconnected from the site's style sheet.
NO CHANGES have been made to the stylesheet nor its link connection [on the page].
I cant imagine that I am the only one this has happened to and perhaps it is a quike of html!
Can someone kindly proffer any potential diagnosis and naturally resolution ?
W

As I thought my explanation was not good enough.....I'll try a different tack
I copied a page from a pre-written site [turnkey project]
the styles were already in situ and correctly applying
the style apply to a set of php includes
In order to make some additions to that page; the site provides an html editor, where the html/code can be edited
also, the code can be copied and edited in an IDE such as my Dreamweaver.
that being the basis:
I copied the page [html] to a local file
added a couple of tables and a graphic - which I had been doing on several other pages from the same site without issue
I then copied the code from the local file and pasted this back into the site file structure - it was at this point I discovered that the styles had been effectively thrown out! I had not made any other changes to the code.
Insofar that I reckon retracing my steps mught help obtain a solution.
Question:
what action might have caused the styles to disconnect in the first instance?
what would cause such a disconnect?

Similar Messages

How can I tell that a default numeric format has been applied to a numeric limit step?

I am working on generating custom HTML code for our test systems in order to reduce the 'footprint' of the standard HTML entries for numeric limits, multiple-numeric limit steps etc....
For a Numeric Limit step, I can set the Numeric Format via the 'Limits' tab and select the pulldown arrow to select any format. Does TestStand actually save this information with the step so I could possibly use this later? I ask this because my modifications are within the 'ModifyReportEntry' Callback. When I am modifying the code to generate new HTML within this callback, I have no idea if the developer has selected a Numeric Format for a given step OR simply left it as DEFAULT.
To make matters more confusing, here is some more information....
When I pause the execution in the callback I notice the following:
Case 1: User has selected a Numeric Format ( this example I will say 3 digits of precision ) %.3f. for a numeric limit step.
Parameters.Result.Limits.Low = 10.000
Parameters.Result.Limits.High = 20.000
Parameters.Result.Numeric = 15.657
Notice the numeric data is ALREADY formatted! Great, I can simply use this to generate my custom HTML table for the numeric limit step.
Case 2 : User has left the numeric format to <Default> for the step.
Parameters.Result.Limits.Low = 10
Paramters.Result.Limits.High = 20
Parameters.Result.Numeric = 15.65713515155
Numeric data is NOT formatted. I know that TestStand will apply the Default Numeric Format that is configured in the report options when it writes the report but since I am doing a custom report I am stuck.
My question is how can I possibly tell that the data has already been formatted by TestStand in the ModifyReportEntry callback? Is there some flag that I could check or anything?
I do notice that the Parameters.ReportEntry string contains TestStand's default HTML code for the step and this is already properly formatted.. so as a possible workaround I could 'pick out' the data from this string but this is slow and time consuming.
Thanks
PH

PH,
You can find out if the numeric format has changed using the TestStand API. I use the following statement in my step's post-expression to find out the numeric format that TestStand uses for the step.
Step.Limits.Low.NumericFormat
If the string returned is an empty string, then it is the default format, otherwise, it's the one specified in the string.
Hope this helps.
Raj
National Instruments
Applications Engineer

BEx Error: Automation error: Object invoked has disconnected from clients

Hi,
We have a user here that attempts to access a query in BEx (MS Excel), but receives this error message:
- Runtime error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Any ideas.
Thanks,
John

Please go through the OSS note 857360..
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=857360&_NLANG=E
This talks about your error..
Solution
1) Replace the RFC library
librfc32.dll
on the client PC with a current version.
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
There is a version of the 620 and 640 librfc32.dll in the attachments: and we recommend that you use Version 640 (compatible with SAPGUI 620) (see below).
620 Version: Download librfc32.rar. Rename it librfc32.exe. This file extracts itself automatically.
640 Version: Download librfc32.zip. You can use WinZip to extract this file.
Note:
It seems that newer (delivered) versions of 6.20 librfc32.dll do not contain this fix. In this case, you can also use the 6.40 librfc32.dll. For reasons of compatibility, you should use the following Microsoft DLLs that are available on the PC for this: msvcr71.dll and to be msvcp71.dll (see Note 684106).

.ToShortDateString() format has changed on new server

I'm managing an asp.net 4.0 website with a backend written in c#.
After changing from a 2008 to a 2012 windows server (now on azure) the date time format has changed from Swedish to English.
I have tried to change the language setting on the server but it won't change on the site.
In the .Net Globalization setting the culture is set to "Invariant Language (Invariant Country)" but that was the same on the old server.
Anyone know what and where I need to change.
The site works as it should but I want to make sure the datetime format is correct without change the code.

Hi Celledor,
Based on my research, the method .ToShortDateString () is formatted using the pattern defined by the
DateTimeFormatInfo.ShortDatePattern property associated with the current thread culture, please try to set the property ShortDatePattern in C#.
I hope this helps.

Before I formatted my computer, I had a box that said translation, but now after formatting has disappeared. How do I get back it? m.v.h. Tore

Before I formatted my computer, I had a box that said
translation, but now after formatting has disappeared. How do I get back
it?
m.v.h.
Tore
== This happened ==
Every time Firefox opened

See http://www.google.com/support/toolbar/bin/answer.py?answer=20871 - Translate : Translate basics - Toolbar Help

HT1414 Whenever I try to sync my iphone with my PC it says my iphone has disconnected?

I have been trying to sync my iPhone. Each time I go to iTunes it tries to sync but then I get a message that says my iPhone has disconnected.

DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

AVReceive2 gives error: No format has been registered for RTP Payload type

Hello,
I am using the AVReceive2 program (http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVReceive.html#requirements) as posted to hopefully play back RTP in real time. I have it set to receive a known good RTP stream and I receive the following error:
No format has been registered for RTP Payload type 8
I have seen posts for a similar error but it seemed to be in the context of an A-law add on which am I not doing. Am I missing a plug-in or modification to the code?
thanks in advance,
Erich

Hi Erich,
I have the same problem when I using AVReceive2.java .Could yuo describe your solution in order to solve the issue?
In order to create the RTP stream I used VLC and is impossible to change the encapsulation method and then the payload type .
What kind of streaming server are yuo used?
My e-mail address is [email protected]
If you can , please write me your proceeding in order to solve the problem.
Thank you

Can someone help me with "no format has been reg. for RTP Payload type 10"

I am trying to send audio from Mac to PC. Mac uses quicktime for java and PC uses jmf. I looked at the Jmf supported formats list and on the SDP file for mac i used payload types like :
m=audio 2656 RTP/AVP 0
c=IN IP4 239.60.60.60
. I also tried other formats too but I always get "no format has been registered for rtp payload type 10". on the pc side. Anyone can help me out? thanks!

Sprint's unlimited wireless service is actually ten bucks more a month than my Verizon service, according to Sprint's Web site.
And Verizon's customer support is the best in the industry.
I have never experienced a "throttling" with my Verizon account. And I have never experienced any limited bandwidth usage problem.

"server has disconnected...." and it hasn't. and i can't sign in

i have had no problems with thunderbird, however since yesterday, i am unable to receive emails, save emails, or copy them to the send folder.....i have a mac with version 10.8.5
error message "server has disconnected....."
i can't seem to find help anywhere. my settings in my account r fine, my mail server is working.....
help me help me help me
i don't want to uninstall and then reinstall, but if this will help then i will
k

ok, this is how i solved my problem
go here and follow the directions to back up your profile http://www.maclife.com/article/howtos/how_back_and_restore_mail_thunderbird_6
then, open thunderbird and delete your account, then add the account again.
now this should work.....the profile backup is just in case stuff happens
hopefully this will work for anybody with this problem.....i think the last update screw up my account settings and i could not figure out where
good luck
k

EXCEL VBA: Inserting rows code returns error "2147417848 The object invoked has disconnected from its clients"

I was executing the following code in Excel 2013 that is linked to a button I use to add multiple rows in a chosen section of a worksheet
Sub Add_Rows_dc()
Sheet53.Unprotect ("xxx")
X = Range("C1").Value + 1 'Section Counter
Y = ListSheet.Range("I" & X).Value 'Existing rows counter
Z = ListSheet.Range("H" & X).Value 'Position counter
Righe = InputBox("How many rows would you like to add?", , "1")
If Righe < 1 Then GoTo err ' test for invalid row number
RigheSheet.Rows(X).Copy
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
GoTo Fine
err:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
End Sub
From time to time it returns me the error "2147417848 The object invoked has disconnected from its clients" and the debug point out the line
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
I cannot find any specific reason due to the fact that the error seems randomic, sometimes the code is perfectly executed, sometimes not.
I wrote this piece of code in Excel 2010 and never encountered such problem before reusing it in Excel 2013
Has someone an insight or a suggestion?
Thank you very much

Re: strange error
Try it this way...
(might work, might not)
Sub Add_Rows_dc_R1()
Dim X As Double
Dim Y As Double
Dim Z As Double
Dim Righe As Variant
Dim Mess As Long
    Sheet53.Unprotect ("xxx")
    X = Range("C1").Value + 1 'Section Counter
    Y = ListSheet.Range("I" & X).Value 'Existing rows counter
    Z = ListSheet.Range("H" & X).Value 'Position counter
    Righe = InputBox("How many rows would you like to add?", , "1")
    If Righe < 1 Then GoTo errX ' test for invalid row number
     RigheSheet.Rows(X).Copy
     Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
    GoTo Fine
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
Exit Sub
errX:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
End Sub
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

The object invoked has disconnected from its clients

Hi
I decided to take the plunge and update our server and take it up to SP1
I updated it at weekend and it all seemed fine.
I could log in and it all seemed wonderful, and I breathed a sigh of relief. Yes.
Err NO...
Come in this morning and I cannot remotely log in.
I go locally to the machine and try to login but get this message "The object invoked has disconnected from its clients"
I wondered if anyone has encountered this error and managed to fix it?
Thanks.

Hi,
Thanks for your posting in Windows Server Forum.
Can you able to login successfully after this error occurs?
Did you try to take the console of server?
Please try to find out the logs to see if there is any detailed error message during this issue. Also please try to login with admin account and check the result. If this can’t solve, you can try to start with safe boot mode and login into the server and try
to find some logs related to the issue.
Hope it helps!
Thanks,
Dharmesh

Which audio format has the least overhead? CS5 AIR

Hi guys,
I'm wondering which music targeted audio format has the least overhead for CS5.
I'm publishing a project to Air 2 and need to keep down the amount of processor I am using on my client's laptop ( which is an old Black MacBook ).
I am using mp3 at the moment with standard 192 mp3 compression, but if there was a better, maybe 'native' format - I'd use that.
Thanks in advance.
Steve

Hi guys,
I'm wondering which music targeted audio format has the least overhead for CS5.
I'm publishing a project to Air 2 and need to keep down the amount of processor I am using on my client's laptop ( which is an old Black MacBook ).
I am using mp3 at the moment with standard 192 mp3 compression, but if there was a better, maybe 'native' format - I'd use that.
Thanks in advance.
Steve

The record has stopped because the audio format has changed

I am using a JVC 9500E onto an XP pro machine with CS3 nothing else large empty hard drive. Firewire.
Bringing a recording which was taken in one go with no changes - at 48Khz. PAL nothing odd - just continually opauses every 5-360 seconds with the error
The record has stopped because the audio format has changed.
using TAPe and Scene detect.
anyone got any ideas?

I know this is way too late and not really an answer, but I've had the same kinds of problems with PP2's capture function on 3 different decks on 2 different motherboards and 4 different OSes.
My work involves capturing and repairing problematic and old or damaged tapes of all kinds. I understand that there will be some errors (tape stretch, breakage, etc) that can't be handled by the deck/camera hardware directly, and I have no problems with having to manually cue past such issues.
But for otherwise fine and undamaged tapes, for PP2 to suddenly cease capturing, prompting to save less than 2 seconds' worth of video when all that happened was some minor tape noise or an audio frame missing is unhelpful at best and crippling otherwise. It's got to the point that PP2 is completely useless to me, when only the most pristine tapes with the most minimal of problems can be reliably captured.
Since I've used the same hardware (cables, decks) to capture 1200+ hours of "through" footage (i.e. not MiniDV tape playback) without major problems, on the current system alone, that would seem to indicate that the system/cable/deck hardware is fine, it's the problem frame handling that's broken. When 3 different deck/camera manufacturers all react to the same tape problems in the exact same way (at least, for the few common tapes that I've had the ability to test on all 3 decks, all else being equal), that doesn't seem to me to indicate a manufacturer or model problem at all.
However, Adobe's support response in each case (audio drops or minor tape dropouts) is "get the camera repaired by an authorised repairer". (It would seem that I'm an example of a particularly unlucky customer, buying 3 brand-new top-of-the-line 'duds' from 3 different manufacturers in as many years! What are the odds? I should buy a Lotto ticket...) That kind of support response is a real pity, since using the basic transport functionality outside PP2 seems to work perfectly for all but the most severe tape problems, but only using anything except PP2.
To try to tell me that this is a deck hardware failure each time I've raised the same type of problem is disingenuous at best. But that's another story.
The workaround (and yes, there is one!) is to use anything else except Premiere Pro 2.0 for any MiniDV capture operation. It's much easier to use VLC or Nero to perform flawed tape capture, and then use the otherwise sensational editing prowess of PP2 to fix the problems later.
Pity.

My number has disconnected from iMessage on my computer

I am in the middle of replacing my iPhone, with my current phone not being activated anymore. I have been using iMessage on my computer with no problem up until 2 days ago. The cell phone number is suddenly disconnected from my iMessage / apple ID account when I try to log in. The phone I've been using as well has only been sending iMessage texts from my email accounts, not my cell number. I'm not receiving texts from people either unless they send them to my email. I have both devices updated to the latest software as well.

Hi,
I am in the middle of replacing my iPhone, with my current phone not being activated anymore. I have been using iMessage on my computer with no problem up until 2 days ago. The cell phone number is suddenly disconnected from my iMessage / apple ID account when I try to log in.
Yep standard procedure.
Deactivate either the iMessages settings or the iPhone as a whole and the number will be eventually removed from the iMessages server.
The phone I've been using as well has only been sending iMessage texts from my email accounts, not my cell number. I'm not receiving texts from people either unless they send them to my email. I have both devices updated to the latest software as well.
As has been mentioned above we now are told of an active iPhone.
If the iPhone Number has become removed as iMessages on that iPhone was Off for a long period then your Apple ID may be the only contact details that are valid at the moment.
If you then send iMessages they will be From your Apple ID and people will reply to the Apple ID.
Even if you remove that conversation they may still list it an use it to start an "new" conversation with you which will still be with or to your Apple ID.
I see nothing that is wrong with the way things are working based on what you have posted.
9:12 pm Thursday; May 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there a way for internal DHCP Scope to release scope addresses when the wifi client has disconnected?

DHCP scope is configured on a WLC 5508.
I'm checking if there' a way for WLC to clear the dhcp leasing when a user is diconnected from wireless?

Unless the client sends a DHCP Release upon disconnect, which is not mandaded in the protocol, the lease will simply remain until it has expired. If you're concerned with running out of leases, you only have 2 options.
1. reduce the lease time of your dhcp scope
2. increase the network size to accomodate more usable addresses.
There isn't a way to force a DHCP address lease to be "cleared" from the WLC simply because the client was disconnected.

Stylesheet Formatting Has "Disconnected"

Similar Messages

Maybe you are looking for