.ToShortDateString() format has changed on new server

I'm managing an asp.net 4.0 website with a backend written in c#.
After changing from a 2008 to a 2012 windows server (now on azure) the date time format has changed from Swedish to English.
I have tried to change the language setting on the server but it won't change on the site.
In the .Net Globalization setting the culture is set to "Invariant Language (Invariant Country)" but that was the same on the old server.
Anyone know what and where I need to change.
The site works as it should but I want to make sure the datetime format is correct without change the code.

Hi Celledor,
Based on my research, the method .ToShortDateString () is formatted using the pattern defined by the
DateTimeFormatInfo.ShortDatePattern property associated with the current thread culture, please try to set the property ShortDatePattern in C#.
I hope this helps.

Similar Messages

The record has stopped because the audio format has changed

I am using a JVC 9500E onto an XP pro machine with CS3 nothing else large empty hard drive. Firewire.
Bringing a recording which was taken in one go with no changes - at 48Khz. PAL nothing odd - just continually opauses every 5-360 seconds with the error
The record has stopped because the audio format has changed.
using TAPe and Scene detect.
anyone got any ideas?

I know this is way too late and not really an answer, but I've had the same kinds of problems with PP2's capture function on 3 different decks on 2 different motherboards and 4 different OSes.
My work involves capturing and repairing problematic and old or damaged tapes of all kinds. I understand that there will be some errors (tape stretch, breakage, etc) that can't be handled by the deck/camera hardware directly, and I have no problems with having to manually cue past such issues.
But for otherwise fine and undamaged tapes, for PP2 to suddenly cease capturing, prompting to save less than 2 seconds' worth of video when all that happened was some minor tape noise or an audio frame missing is unhelpful at best and crippling otherwise. It's got to the point that PP2 is completely useless to me, when only the most pristine tapes with the most minimal of problems can be reliably captured.
Since I've used the same hardware (cables, decks) to capture 1200+ hours of "through" footage (i.e. not MiniDV tape playback) without major problems, on the current system alone, that would seem to indicate that the system/cable/deck hardware is fine, it's the problem frame handling that's broken. When 3 different deck/camera manufacturers all react to the same tape problems in the exact same way (at least, for the few common tapes that I've had the ability to test on all 3 decks, all else being equal), that doesn't seem to me to indicate a manufacturer or model problem at all.
However, Adobe's support response in each case (audio drops or minor tape dropouts) is "get the camera repaired by an authorised repairer". (It would seem that I'm an example of a particularly unlucky customer, buying 3 brand-new top-of-the-line 'duds' from 3 different manufacturers in as many years! What are the odds? I should buy a Lotto ticket...) That kind of support response is a real pity, since using the basic transport functionality outside PP2 seems to work perfectly for all but the most severe tape problems, but only using anything except PP2.
To try to tell me that this is a deck hardware failure each time I've raised the same type of problem is disingenuous at best. But that's another story.
The workaround (and yes, there is one!) is to use anything else except Premiere Pro 2.0 for any MiniDV capture operation. It's much easier to use VLC or Nero to perform flawed tape capture, and then use the otherwise sensational editing prowess of PP2 to fix the problems later.
Pity.

Mail format has changed...

I checked my e-mail before I went to bed last night and all was well... This morning I can receive and send e-mails, but the format of every message has changed! Lines of text are perhaps a dozen spaces apart, rather than single or double spaced. I restarted and then rebuilt the mailbox, but it persists.
Any ideas? Thanks.
C.

Charles,
Not sure this is the cause, but see:
http://discussions.apple.com/thread.jspa?messageID=4923736&#4923736
Not sure if I have seen this cited for Leopard and Mail 3.x, but would expect things to be similar.
You should check for the continued presence of the Helvetica.dfont, but since that is necessary for good operation of Safari and some other apps, it is probably not the issue here.
Btw, is the Photoshop CS4 or the entire Creative Suite?
Ernie

ITunes Sync Screen Has Changed On New Version 8.2.1

This may have been asked already. I have just upgraded iTunes to the latest version 8.2.1. I was on 8.0 previously.
My question is, I noticed that the iTunes Sync screen has changed. Now when syncing, instead of showing the screen with the check boxes (ie Use Disk Storage) and the disk usage at the bottom of the screen, it just shows my songs in a list.
Is there anyway to put this back via preferences? I heavily rely on that screen.
TIA,
Ted

You have to click the device every time you connect it. Some people like this because connecting the device does not interrupt whatever they were doing in iTunes at the time. I prefer the old way though.
You can send your thoughts on this to Apple here:
http://www.apple.com/feedback/itunesapp.html

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

TS3048 using vmware my mouse will not automatically go from apple to windows without control command button execution which has changed from new

When I first got the IMAC my mouse would go from windows to IMAC without having to strike control command keys to realease. I would like it to be as I purchased it and think it is some setting I accidentally changed or something and want it back to original can anyone give me guidenance

What kind of mouse is it?

Messaging tracking logs filename format changed in Exchange Server 2013 sp1

Hi,
I have noticed that the file name format is changed for exchange server 2013 sp1.
Now it will have hh attached to it like
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
So the "hh" will goes from 00 to 23 for single day.
So Lets say at 24 april 2014 first fill is created @7.30 AM, so the first file name will be
MSGTRK2014042400-1.log. Now exchange server will create new file every hour by incrementing hh part of file name. Now the last file i.e
MSGTRK2014042423-1.log will be created on 25 April 2014 at 6.30 AM.
I am not able to understand why exchange server is creating the file with old date on next day ( with 24 April on file name time stamp on 25 April).
And also how it will be decided to create the first file @ 7.30 AM.
Can anyone explain to me about this ? Why it is happening like this?
Thanks
Sandeep Gupta

Hi Sandeep,
This could related to the time difference. What’s the time zone of your server? In my lab, many files in the last day were created in the next day. For example, files in 20140410
were created on 20140411.
Also, as you mentioned, the file name format is as:
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
However as I know, the format is like
MSGTRKyyyymmdd-m.log, it will not have “hh”(you mean hours) in the behind and the file is not created every hour but create a new file when the old is full. So please capture some screenshots of the message tracking files
and the date/time information of the file to verify.
Title: Message Tracking
Link:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Regards, Eric Zou

How can I tell that a default numeric format has been applied to a numeric limit step?

I am working on generating custom HTML code for our test systems in order to reduce the 'footprint' of the standard HTML entries for numeric limits, multiple-numeric limit steps etc....
For a Numeric Limit step, I can set the Numeric Format via the 'Limits' tab and select the pulldown arrow to select any format. Does TestStand actually save this information with the step so I could possibly use this later? I ask this because my modifications are within the 'ModifyReportEntry' Callback. When I am modifying the code to generate new HTML within this callback, I have no idea if the developer has selected a Numeric Format for a given step OR simply left it as DEFAULT.
To make matters more confusing, here is some more information....
When I pause the execution in the callback I notice the following:
Case 1: User has selected a Numeric Format ( this example I will say 3 digits of precision ) %.3f. for a numeric limit step.
Parameters.Result.Limits.Low = 10.000
Parameters.Result.Limits.High = 20.000
Parameters.Result.Numeric = 15.657
Notice the numeric data is ALREADY formatted! Great, I can simply use this to generate my custom HTML table for the numeric limit step.
Case 2 : User has left the numeric format to <Default> for the step.
Parameters.Result.Limits.Low = 10
Paramters.Result.Limits.High = 20
Parameters.Result.Numeric = 15.65713515155
Numeric data is NOT formatted. I know that TestStand will apply the Default Numeric Format that is configured in the report options when it writes the report but since I am doing a custom report I am stuck.
My question is how can I possibly tell that the data has already been formatted by TestStand in the ModifyReportEntry callback? Is there some flag that I could check or anything?
I do notice that the Parameters.ReportEntry string contains TestStand's default HTML code for the step and this is already properly formatted.. so as a possible workaround I could 'pick out' the data from this string but this is slow and time consuming.
Thanks
PH

PH,
You can find out if the numeric format has changed using the TestStand API. I use the following statement in my step's post-expression to find out the numeric format that TestStand uses for the step.
Step.Limits.Low.NumericFormat
If the string returned is an empty string, then it is the default format, otherwise, it's the one specified in the string.
Hope this helps.
Raj
National Instruments
Applications Engineer

Report deployed to new server does not display static image

Hi,
We have several web sites on a server running Windows Server 2008 R2 Standard, SP1, 64-bit. It has installed .NET Framework 4 Client Profile and Extended, ver. 4.0.30319 (according to Control Panel->Programs, as well as c:\Windows\Microsoft.NET\Framework). Two of the sites use many Crystal Reports, most of which include a static image as a logo. This image is embedded in each report; there is no stand-alone image file that gets deployed.
Recently, we migrated to a new server, running the same version of Windows & .NET Framework. As near as we can tell, the 2 servers are nearly identical, as far as configuration and permissions, etc. One notable exception is the DefaultAppPool, which is Classic on the original server and Integrated on the new. (When I changed the new server to Classic, the apps failed to run properly.) The other exception is the old server is on a stand-alone box, while the new server is a virtual machine.
For one of the apps on the new server, the embedded logo images are not displaying on the page. Instead, there is a little red X with the word "Image". For the other app on the new server, the reports display fine. Furthermore, if I copy one of the "broken" rpt files from the "broken" app to the "good" app, the report displays correctly! And of course, the same file displays correctly in all circumstances on the old server.
This suggests to me that there is not a problem with the report file, per se', but rather with the environment to which it is deployed. Permissions? If so, where?
Any suggestions would be much appreciated.
Thanks.
--d

The search string 'crystal red x net' (search box in top right corner) should return a number of KBAs, docs, blogs, etc. See if any of those help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

RDF report layout output has changed in R12

Hello experts,
I am currently helping a client with R12 upgrade process. One of the things I noticed is that the RDF report pagelayout formatting has changed a little bit. Such as the header of a column has been left justified in R12 when in 11i it is centered. Also it seems like the font size may have been changed in R12. In 11i, one of the column headers shows 2 rows
Extended
Cost
And in R12 it only shows Extended and the 2nd row is missing.
Has anyone encountered this before?

Is this a seeded or custom report?
Does the same happen for all reports of the same type or just this specific one?
Thanks,
Hussein

Mail is changing my Exchange server address

So I work offsite from my office and the office has it's own Exchange 2007 server. When I add my email to Mail.app, it autodiscovers my settings and properly sets up my account.
The issue happens when I exit the app and re-open the app, I start getting errors and find that Mail.app has changed my internal server address to something different, and I have to change it back again to the right one, ie:
Correct address:
mobile.xxxxxxxxxx.com
Wrong one that Mail.app changes the address to:
exchange.xxxxxxxxxx.com
Anyone know how to keep it from doing that?

Figured it out.
I let Mail.app change the internal server to the exchange.xxxxxxxx.com address, and added the mobile.xxxxxxx.com address to the external server field, and everything works without errors now.

Page Has Changed ERROR! Help please!

I am trying to edit an ICE site but I keep getting the error:
PAGE HAS CHANGED-
A new version of this page has been detected. The new page will be loaded.
It loads the "new page" even though nothing has changed, only to happen again. I have used ICE on multiple other sites but this is the only one giving me trouble. The url is http://www.mainsqueezemusic.com.
Can anyone help?

I was able to edit and save the draft for the http://www.mainsqueezemusic.com/includes/ice/ide.html#page=home.html page and then edit the draft again with no problems.
Is this issue still happening?
On what page?
Could you give more details?
Regards,
Dan Popa

After updating to firefox 17.0 when I do a scan with Norton 360 it does not pick up tracking cookies what has changed from 16.0.02

After updating to firefox 17.0 when I do a scan with Norton 360 it no longer picks up tracking cookies. These cookies that were picked up with firefox 16.0.02 what have you changed? Further I am getting sick of these updates - at least tell us users what has changed in new versions.

Did you update Norton to the latest version to get support for Firefox 17?
*http://community.norton.com/t5/Norton-Internet-Security-Norton/bd-p/nis_feedback
*http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-17-Support-for-Norton-Toolbar/td-p/853420
*http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-17-Support-for-Norton-Toolbar/td-p/853416

Serv. Desk: Action: send an email only when a value in a field has changed

Hello,
In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
- only in change mode relevant
- only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
- it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
if <old value> <> <new value>
Any ideas or experience on how to implement this without major modifications ?
Thanks
Christian

Hi Christian,
check out my question on SDN.
Email on Status Change
it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
regards,
Jason

I found an old Apple id on a computer I use infreqently with an old Ipod. I have the the Applie ID, but I do not have the password. In addition,my email account has changed since I created this Applie ID. How can I get reset info to new email address?

I found an old Applie ID on a computer I use infreqently with an old IPod. I do not have the password for this AppleID. When I use the procedure to reset the password, I cannot receive the email as my email address has changed from the original used with the Apple ID. How can I get the reset information sent to my current email addres so I can establish a new passwod for this Applie ID?

FR Tecmobility is wrong, sure he means well but what he suggests will not work - signing out of iTunes Store and back in will have no effect on iCloud. Try the steps at iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
You may need to contact apple tech support if none of the password change methods work for you. Ask for Account Security. They will need to verify identity, to ensure you are who you claim to be. If that goes well, they can send a password rest e-mail to any e-mail you desigate, so make sure it is one you can access. Then reset the password. Then you can delete the iCloud account (needs the password to turn off find My Phone/Activation lock)
keep data on phone, then sign in with your desired apple ID. Good luck. hope you get this sorted out.

.ToShortDateString() format has changed on new server

Similar Messages

Maybe you are looking for